Enhancement points in ECC 6.0

Hi,
Pls let me know how to find the enhancement points and how to plug-in  our own code there.
Regards,
Kavitha

Using SE80 -> Enhancement Info System -- you can find those.
For more details check..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc

Similar Messages

  • ENHANCEMENT-POINT / Enhancement in ECC 6.0

    Hi all!
    I have been searching for an answer.  I have yet to find anything.
    Anyway here's my question:
    I am using an SAP provided enhancement point.  (I think)
    It looks like this in the code:
    ENHANCEMENT-POINT me_print_po_01 SPOTS es_saplmedruck.
    $$-Start: ME_PRINT_PO_01----
    $$
    ENHANCEMENT 16  ISAUTO_SCH_EMM_SAPLMEDRUCK.
    I double click on the 16 and entered my code.  Then I looked at the properties and found the switch AM_SCH_MM was off.
    So I created a business function via sfw2 included the switch AM_SCH_MM and activated the business function.  Since I've been reading the forum.  I activated my new business function in sfw5 as well.
    I put my program into debug.  It is still skipping over the enhancement.   I'm sure I've missed a step somewhere as we are just implmenting from 4.5C.
    Does anyone know why this isn't working?  Or simply how to activate an SAP supplied enhancement.   I've been reading on creating a custom enhacement and using a BADI.   Do I have to do the same thing for the SAP supplied one?
    Thank you,
    Michelle

    Sure.
    I went into the SAP code.  Then I used the menu path:
    Function Module -> Enhanceme source code
    -OR-
    Program -> Enhance.
    I determined where in the source code that I wanted my code to be at then I right clicked.
    Enhancement Implementation -> Create
    Entered the name and text, package.
    Selected the implementation.
    Entered my code.
    Activated the enhancement or Ctrl-F3.

  • Enhancement points option: Function modules or BADI

    Hi, I am on ECC 6.0 and I need to validate and set some requirement in customer sales area data when user input the document output message in Documents tab strip screen 7003 of sapmf02d  in transaction XD01 or XD02.
      I found that there is function module EXIT_SAPMF02D_001 that I probably can use to create an implicit enhancement point to validate table T_KNVD or  I can use BADI customer_add_data.  Can someone suggest which way is better and why?  I am new to this so could someone show me screen by screen on how to create and implement BADI.
    I am confusing about should I create a ZBADI or using existing BADI customer_add_data.  If I use existing BADI how can I add my own method with my own code. 
    Thanks.

    Thanks. Could you explain to me how does the custom BADI get call to execute my code?  Say
    I have a customer document screen 7326 (Customer Master Subscreen SD Documents in program  SAPMF02D).  What I want is when user click save, I want to do some validation on the output message that they enter and issue some warning or error messages.
      I am on ECC 6.0 so I can create a BADI from Enhancement spot not from SE18.   SAP has a BADI called CUSTOMER_ADD_DATA with class CL_EX_CUSTOMER_ADD_DATA and interface IF_EX_CUSTOMER_ADD_DATA. 
    When I create a ZBADI_CUST, which interface class I put in the IF_EX_CUSTOMER_ADD_DATA
    or a ZIF_EX_XX so that I can create my own method?  How does the BADI get called when I am in transaction XD02 and click the save button?  Could you kindly show me step by step the procedure.
    Thanks.

  • Enhancement Point in ABAP code

    Hi ,
    I am working on an upgrade from 4.6 to ECC ,so have a  have a standard FM with an enhancement point , how do i know if there is an implementaion for that or not and can i debugg the code in the enhancement point .
    When i click on the enhancement spot it goes to a class and i can see the code in that methods but cant set a breakpoint in it , kindly suggest what should i do.
    Regards
    Arun

    Hi
    double click on the enhancement point. it will take you to the enhancement spot into which it is defined.
    click on the tab "enhancement implementation". it will show you all the existing implementation. I you find nothing than this point is not implemented yet.
    if it is taking you to a class then it is a BADi implemented via new enhancement framework. to find it is implemented or not, repeat the above steps. to debug it:
    in the left section, expand entries under heading BADi definitions.
    double click on "implementations". you will get the existing entries on right side. double click on this entry. on the left side under heading "BADI definitions" you will get the implementing class.
    double click on it to get the class name.
    go into the class and see the method implemented. u try to hard code the break point into the method,
    activate it and then try to debug it.
    Thanks
    Vishal Kapoor

  • Creating Enhancement Implementation for the  Enhancement spot in ECC 6.0

    Hi All,
    I have an urgent requirement of creating an Enhancement implementation for the existing Enhancement Spot in ECC 6.0 ..
    I never worked on enhancement in ECC 6.0.
    There is an existing enhancement spot called "ES_SAPLIQS0" in the package " IWOC". which has got three existing implementations
    1. DI_ROT_SAPLIQS0
    2. ISU_SAPLIQS0
    3. DIMP_GENERAL_SAPLIQS0
    I need to create another implementation for the same enhancement spot.. Please let me know the detailed procedure to create the enhancement implementation for the same spot..
    Thanks-
    Shrikant
    useful answers will be rewarded.

    First of all find out the include program where you want to write the logic.. Click the spiral button to go to enhancement mode.. then click on Edit > Enhancement operations> Show implicit enhancement points.
    This will hightlight all the enhancement points in your include program. Right click on exact enhancement point and select Enhancement Implementations --> Create,, It should give you the same Enhancement spot you are talking about. select that and write the code.. This code will be automatically appear in the same enhancement spot. You can see one more Enhancement implementation in the same Enhancement spot from the transaction code se19.
    Hope my explanation is clear, if you have any doubts, send me a mail at [email protected]
    All the best.
    Shrikant

  • Enhancement spot in ECC 6.0

    Hi all,
    can anyone please make it clear on what enhancement spot is in ECC 6.0.
    All Useful answers will be rewarded..
    Thanks & Regards,
    Saroja.

    Hi
    ENHANCEMENT-POINT
    ENHANCEMENT-POINT can either be static (for example, additional data declaration) or dynamic (for example, additional coding).
    http://help.sap.com/saphelp_nw2004s/helpdata/en/56/ee9441026aae5fe10000000a1550b0/content.htm
    Refer the very useful links below:
    Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    Please check this blogs and wiki as well.
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
    Please check these weblog for more information and sample codes.
    /people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    Look at this articles:
    New Enhancement Framework
    Enhancement Framework
    Enhancement Framework - The New Way to Enhance Your ABAP Systems
    Switch Framework Demo
    Introduction to the Enhancement Framework
    To now more about BADi Implementation see:
    How To Define a New BAdI Within the Enhancement Framework
    How to implement a BAdI And How to Use a Filter
    Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    Please check this blogs .
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
    Enhancement frame work is the new concept using which SAP allows you to change the existing programs
    See the following blogs that talk about the same in detail
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    Defines a position in an ABAP program as an enhancement option, at which one or more source code plug-ins can be inserted.
    Syntax
    ENHANCEMENT-POINT enh_id SPOTS spot1 spot2 ...
                      [STATIC]
                      [INCLUDE BOUND].
    Extras:
    1. ... STATIC
    2. ... INCLUDE BOUND
    Effect
    : This statement defines an explicit enhancement option at the current position in the program at which a source code enhancement can be made. In program generation, the source code plug-ins of the assigned enhancement implementation that are available in the current system and have a switch in the status stand-by or on, are inserted at this position.
    If the addition STATIC is not specified, the source code enhancement is dynamic. This means that in program execution, only those source code plug-ins are executed whose switch has the status on. If a source code plug-in does not have a switch assigned to it, it is handled in the same way as a plug-in with a switch in the status on.
    With enh_id, an ID must be specified directly for the enhancement option, which is unique in the current compilation unit without the addition INCLUDE BOUND, and with this addition, is unique in current Include program. At least one enhancement spot must be assigned to the enhancement option using the specification simple enhancement spots spot1, spot2, and so on.
    Within enhancements, one or more source code plug-ins can be created for one enhancement option. A source code plug-in is created by the assignment of an enhancement implementation in the Enhancement Builder. This automatically generates an empty source code plug-in with a unique ID, which is displayed underneath ENHANCEMENT-POINT in the Editor, where the actual enhancement can be implemented between ENHANCEMENT and ENDENHANCEMENT.
    A source code plug-in is assigned to only one enhancement option. Multiple source code plug-ins of one enhancement implementation and the source code plug-ins of multiple enhancement implementations can be assigned to one enhancement point.
    Notes
    : In the terminology of the enhancement concept, the statement ENHANCEMENT-POINT includes both the enhancement spot element definition and the enhancement spot invocation of the enhancement option.
    The statement ENHANCEMENT-POINT can either be entered directly or created by choosing Edit ? Enhancement operations ? Create enhancement in the Enhancement Builder. After the program has been saved or created using Edit ? Enhancement operations ? Create enhancement, the statement can only be deleted by choosing Edit ? Enhancement operations ? Delete enhancement.
    In addition to the enhancement options explicitly specified by ENHANCEMENT-POINT, ABAP programs also contain implicit enhancement points, which can also be enhanced using source code plug-ins.
    Addition 1
    ... STATIC
    Effect
    : The addition STATIC is used to define a static source code enhancement. In a static source code enhancement, all incorporated source code plug-ins are taken into account when the program is executed, including those whose switch is in the status stand-by.
    Note
    : The STATIC addition is intended for the enhancement of data declarations, while the statement ENHANCEMENT-POINT without the STATIC addition is designed for the enhancement of executable coding. When the statement is executed using Enhancements ? Create enhancement, the addition is set according to this selection.
    Addition 2
    ... INCLUDE BOUND
    Effect
    : This addition can be entered in Include programs. It links the source code enhancement to the current Include program. Each program that incorporates an Include program only includes the source code enhancements that are defined with this addition. Source code enhancements created using the INCLUDE BOUND addition have their own namespace in each Include program. This ensures that if several Include programs are integrated into one compilation unit, no namespace conflicts arise, either between Include programs, or with the source code enhancements of the compilation unit.
    Without the addition INCLUDE BOUND, a source code enhancement is assigned to only one compilation unit. If the statement ENHANCEMENT-POINT is executed in an Include program without this addition, a compilation unit must be assigned to it in the Enhancement Builder.
    Note
    : In an Include program, Include-bound and non-Include-bound source code enhancements can not be defined at the same time. This also applies if an Include program incorporates other Include programs.
    Enhancement points are points provided by sap in standard programs to modify the source code. Go to any standard program, Locate the spiral button on the toolbar. Then press it and then navigate to edit->enhancement operations->display enhancement point menu. Then a no of yellow lines would appear, which are the available en points. You would have to change it and write the applicable source code.
    Regards
    Anji

  • Enhancement points in ECC6.0

    Hi Friends,
    can anyone please share the documents related to enhancement points (spots) in ECC 6.0?
    Regards,
    Ravi.

    Enhancement points - Changing standard SAP code using the implict and explicit enhamcement points
    Enhancement points are basically hooks at certain defined points within the ABAP code i.e. at the beginning and end of a FORM. These hooks allow you to attach your own custom code which will be executed as if it had been hard coded into the code using a modification. Unlike hard coded modifications these will not be lost during upgrade or patching exercises.
    There are 2 types of enhancements with the enhancement framework:
    1. Explicit enhancement points: These are basically hooks already coded into the program by SAP at various points of the code. See program RIAUFMVK for examples of these! These are very easy to implement simply go into enhancement mode of SE80 and right click on the enhancement point where you want to add your code and choose u2018Enhancement Implementation->Createu2019 Give it a name, description and assign it to a change request (should not be a Z package) and then simply add the code as normal.
    2. Implicit enhancement points: These are basically points within ABAP code where an enhancement point is implied, and in which case can be created. Examples of implicit enhancement points are at the beginning and end of FORMu2019s, at the end of a program, include or function module etc. Click here for demonstration of how to implement an implicit enhancement point!
    Search for enhancement in sdn you will get demo also.

  • Differences between BAdI and Enhancement Point

    Hi Experts,
        The version of system I used is ECC 6.0, as locating  T-code SE18,I find two field areas:Enhancement Point and BAdI.Could you tell me the differences between the two ?

    Check
    https://forums.sdn.sap.com/click.jspa?searchID=12147590&messageID=5161143
    https://forums.sdn.sap.com/click.jspa?searchID=12147579&messageID=5375758
    Regards
    Kiran Sure

  • Creation of an enhancment Point

    Hi all,
    We are creating an Enhancement-Point for an include RV15CI03. This include has several main programs. The one that we want to use is,RV15C002.
    When we create an Enhancement-Point, the COMPILATION UNIT is set to RV15C002 automatically.
    Is there a way to change the compilation unit for this point as "Multiple_use Include".
    Points guaranteed for helpful answers
    Best Regards,
    Ram.

    Hi,
    I dont see a point in having this statement
    swc_set_table event_container 'INTERNAL_TABLE' t_cnp_container. Infact it is not needed !!
    SWE_EVENT_CREATE like any other FM, take a
    lt_var type standard table of SWCONT.
    ls_var type SWCONT.
    fill your ls_var with all fields and append it to lt_var each time and pass lt_var to event_table of SWE_EVENT_CREATE. It should work !!
    However, suggested way is to use SAP_WAPI_CREATE_EVENT instead of SWE_EVENT_CREATE  from ECC 5.0 onwards. There are fe concerns with SWE_EVENT_CREATE mainly with respect to commit and persistancy. Better we should use SAP_WAPI* as much as possible from ECC 5.0.
    Try above and Good Luck !!
    Regards
    Krishna Mohan

  • Sap support for standard prog. w/ custom implem of implicit enhanc.points

    Hello,
    since 1 year I've been confronted to SAP customers which WIDELY implement Implicit Enhancement Points (IEP).
    I have been really surprised that my customers undoubtly think, if a problem occurs in a standard program where there are lots of IEP custom implementations, and if my customers estimate after investigation the problem comes from the standard part and not from the IEPs, they think that SAP support would help them to solve the issue.
    Note: as a consequence, they created much more IEP in ECC 6 than they did in the past with R/3 old releases (via changes of the standard, aka repairs)!
    What I think, is that SAP SUPPORT WOULDN'T HELP them as long as there is custom code (even within IEPs) in the standard program, even if there is only one IEP with one line (because it could change completely the standard algorithm, for example by emptying a global internal table)
    So, I think the only way to get help from SAP is to deactivate these IEP implementations before requesting support. And so, the only solution to deactivate them, customers MUST assign IEP implementations to a package and then to a switch and then to a business function, so that they can deactivate it via switch framework.
    The main concern is that my customers didn't create switch/business function, so they cannot react quickly if a problem happens in production : reproduce in test system, deactivate custom IEPs by switching off business function (it's what they didn't do), reproduce with full standard to determine problem comes from standard, request help from sap).
    Could you share with me what is your approach about implementing IEPs, and maybe, is there somewhere a SAP documentation which explains that officially?
    I hope I was clear.
    Thank you very much for your kind help.
    Best regards,
    sandra rossi

    I played around a bit with this (as I had never done it before) and also from what I have read, the intended option is the switch framework.
    I guess as plan B you could have a virtual system or reliable test environment in which you can disable the enhancement and bring it back again via version management - but from what you have described (IEP deleting gobal variables, etc) this would also remove the "bug" and make the problem difficult to reproduce.
    Perhaps the next best thing (unless someone has a better idea) is to inform your customers about neatly organizing their software developments using packages and switches.
    To my knowledge, the syntax checks are also getting stricter in this area (as you may have noticed) and I hope that (for some of them) will throw errors one day during the development stage already.
    Sorry, that does not help you much (but at least you read "the rules"
    Cheers,
    Julius
    ps: A dirty way of doing it would be to run the program in the new debugger, and skip over the enhancement using the Go-To function. Unlike the classic debugger, the code inbetween does not need to be debugged. Ugly, but effective...
    Edited by: Julius Bussche on Nov 10, 2008 9:13 PM

  • Difference between implicit and explicit enhancement points

    Hi Folks,
    I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
    Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
    Hoping for the positive response from you..
    Regards,
    Rohan.

    Hi Rohan,
    In implicit they are available at the beginning of subroutines defined in the standard reports.
    Edit-> Enhancement operations->show implicit enhancement options.
    This will highlight all the implicit enhancements in the report.
    In Explicit enhancement we have two different types of enhancements -
    Enhancement point and Enhancement section.
    Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
    Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
    After executing the report only your code will be executed and the standard code will be bypassed.
    For Practicle implementation, follow this link.
    Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
    i hope it will give you some clear picture....
    Thanks.
    Anurag

  • How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

    We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
    I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
    "The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
    I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
    Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
    Thanks!!

    I was able to get it to work using your instructions off of here and your other thread
    Thank you!
    Chris
    http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

  • EXIT/ BADI/ Enhancement point for User Status change in Order

    Hi all,
    I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
    I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
    I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
    Thanks and Regards,
    Sonal

    Hi,
    Use this Enhancement IWO10009 and call these function module to change the User Status
    STATUS_TEXT_EDIT --> To Read the existing status.
    STATUS_CHANGE_INTERN_VB --> to change the status.
    Regards,
    Satish

  • User Exit/BADI/Enhancement Point  in VF01 before new document no assignment

    Hi Expert,
       I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
    I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
    Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
    I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment.  Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
    Regards
    Swati
    Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

    HI Brad and team,
       BRED is right. I check few user exit normally all of us have that list or easily available on net.
    BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
    If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
    That why I need a User Exit/BADI/Enhancement Point  which trigger at save but before document no assignment.
    Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process."  .
    Suggest user exit USEREXIT_FILL_VBRK_VBRP  trigger before save. I need at save the reason is VBRK-FKDAT  this can be change.
    Feel free to contact me back if you need more clarification.
    Regards
    Swati
    Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

  • Disable Item Category Field in Va01using Enhancement Point

    Dear Experts,
    I have a requirement to disable the "Item Category" column in VA01 transaction for certain order types.
    I have tried using MV45AFZZ(USEREXIT_FIELD_MODIFICATION), but it does not help me much as it works only if a material is entered in the table.
    I want the field to be disabled even if no material is entered in the item level table, i.e. during the load of the Overview screen.
    I know we can do this using  Implicit Enhancement Points, but i am not able to get the exact include to implement my code.
    Can anyone please help me in finding the exact location to write my code, so that the "Item Category" column will always be disabled for that order type.
    Thanks,
    Praveen

    Go to the screen where you want to disable the column by using system--> status-(click on screen no).
    Identify the perform  statement in PBO before the table control loop.there try implicit enhancement.
    It will definitely work.
    Thank You <Reward request removed by moderator>
    Edited by: Vinod Kumar on Sep 30, 2011 3:01 PM

Maybe you are looking for

  • Exchange 2010 - Archiving not working in desired situation

    Hi guys! Recently we had enabled online archiving on Exchange, the problem is that one thing is not working as we have wanted. We wanted that user picks up manually thru Outlook 2013 client which folder he does not wishes to be moved to archive, but

  • Where to find my Actions???

    Totally a newbie and I'm starting from point A   I have downloaded some actions and such and I'm trying to find out how i can get them to open with Elements 9? Please enlighten me..Thanks! Tammy

  • IWeb Unable to Create File

    I started getting the following message today when I tried to update my site: "Can't create the file "fold_h1b.png." The disk may be damaged or full, or you may not have sufficient access privileges." The iDisk is showing about 9GB available, the two

  • Change Secondary language to English

    Hi , I have English(EN) as the system language and German(DE) as the secondary Language in my development environment. Also Norwegian(NO) language is installed for which supplementation language is English. While logging in with NO and executing cert

  • XP SP2 using AIM 6.5 to OS X.4.11 using iChat v3.1.9 (Ralph pls help???)

    Hoping for some help here... I have an iMac G5 power pc running 10.4.11 with an external iSight. My parents computer is a wintel running XP SP2 with a logitech quickcam orbit MP (USB). I am from OH and they are in FL. Never been able to get video cha