Enhancement to component not picked up

Hello
The enhancements we have made to components are not getting picked up though we have made the assignment of the Enhancement Set to the client. Do we need to perform any more steps?
Regards,
Sowmiya

Hi,
Enhancement set will be picked, once you enhance the component by clicking on "ENHANCE COMPONENT" on the right upper corner of your component workbench.
Once you enhance component then from the second time, you can select your component and enhancement set to enahance/change that component.
Hope this helps.
Best Regards,
Shiven

Similar Messages

Ibase component not picking up

Hi,
Ibase / component was picking up properly from ECC Development till last week.
After the upgradation of ECC development system to sps17 ibase/component is not picking up?
What could be the possible reason for this behaviour.
Raj

Hi
Check in IB52 press F4 there should only one "1" or sol_man_data_rep entry not 2
if so delete the extra entry
then enter "1" and press enter
check your ibase for the ECC or relevant system
Hope above solves problem
Regards
Prakhar

Componant cost not picking in production order

Hi,
Componanat cost is not picking in production order, when i m creating plan order to production order in make to order scenario.
At the same time when i m creating production order by CO01 its working.
Please let me know whats missing?
Tara

Hi,
Thanks for sharing thoughts.
Issue resolved.
(SPRO-Sales and Distribution-Basic Functions-Account Assignment/Costing-Maintain Requirements Classes For Costing/Account Assignment-execute-for req class 040-Account assignment catagory -M & Valuation-M)
Tara
Edited by: tara bhapkar on Jul 7, 2011 2:52 PM

Error while enhancing standard component CRMCMP_CND

Hi,
We have one requirement that Phase Id and Offer Id needs to added in the /SAPCND/GCM transaction and the same needs to be disaplay in the web ui. So we added two fields in field catalog after that we made two implementation in /SAPCND/ROLLNAME and CRM_COND_COM_BADI.
Now the funtionality is working fine in the GUI and in WEBUI the field is added but the F4 value is not visible in the new web ui screen.
So I tried to enhance the standard component CRMCMP_CND, in order to retreive the F4 value help. While selecting the context node in the standard view CondRecEditView we are getting the status message u201CError during analysis of method REATE_CONDRECORD of class L_CRMCMP_C_CONDRECEDITV0_CTXT. Message no. BSP_WD_TOOLS031u201D
In standard view itself I am getting this error and while enhancing the component the context node is not converted in to Zclass.
If we try to add attribute from the context node its giving error create_condrecord does not exist error.
So I am unable to proceed further. If any one aware how to solve this issue kindly let me know.

Hi,
While enhancing a view of a component only the controller (xx_IMPL) and the context class (xx_CTXT) are extended into Z classes. Context nodes (xx_CNXX) are not automatically extended. You have to do it manually only for the context node(s) you would like to modify. Indeed there is a message that appears when you select the context node but this is not the reason why the CN class is not extended.
What you have to do is to redefine the method CREATE_CONDRECORD in class ZL_CRMCMP_C_CONDRECEDITV0_CTXT and create a new class ZL_CRMCMP_C_CONDRECEDITV0_CN00 that extends CL_CRMCMP_C_CONDRECEDITV0_CN00
In ZL_CRMCMP_C_CONDRECEDITV0_CN00 implement method GET_V_xx for the field you want a search help on
Regards,
Fabian

Price was not picking from the Condition type for Item Category 'P' in PO

Hi Experts,
I Created one condition type based on Material and WBS which price was fixed based on this
I used the Purchase Order having Item Category P or Q Price should pick from the condition type where I mapped the WBS Element and Material.
The Net price was not picking from the Condition type Record. Why? What should be the Problem?
Whether my logic is correct or not?

The Scenario: I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
Please help on this.
Thanks
Muthukumar

Hi,
In standard configuration you cannot set item delivery date as a pricing data.
Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
IMG link:
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
hope it helps.
regards,
wojciech

Dynamic JNDI in FTP Adapter | jca.jndi property not picked by Adapter

Hi,
I am trying to pass jndi dynamically to FTP adapter using the steps mentioned in http://blogs.oracle.com/adapters/entry/changing_the_connection_factory_jndi_dynamically_in_ftp_adapter.
I have configured FTP jndi(eis/Ftp/SoaFtpAdapter) at app server.
And included the following property in the invoke activity that calls the FTP adapter
<bpelx:inputProperty name="jca.jndi" variable="jndiLocation"/>
Invoke activity definition looks as following
 <invoke name="Invoke1"
 partnerLink="FTPFileListAdap" portType="ns3:FileListing_ptt"
 operation="FileListing"
 inputVariable="Invoke1_FileListing_InputVariable"
 outputVariable="Invoke1_FileListing_OutputVariable"
 bpelx:invokeAsDetail="no">
 <bpelx:inputProperty name="jca.jndi" variable="jndiLocation"/>
 <bpelx:toProperties>
 <bpelx:toProperty name="jca.ftp.Directory" variable="directoryName"/>
 </bpelx:toProperties>
 </invoke>FTP Adapter jca configuration is as following
<adapter-config name="FTPFileListAdap" adapter="FTP Adapter" wsdlLocation="FTPFileListAdap.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/Ftp/SoaFtpAdapter12" UIincludeWildcard="*.txt"/>
<endpoint-interaction portType="FileListing_ptt" operation="FileListing">
 <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec">
 <property name="PhysicalDirectory" value="/in/dev"/>
 <property name="Recursive" value="true"/>
 <property name="IncludeFiles" value=".*\.txt"/>
 </interaction-spec>
</endpoint-interaction>
</adapter-config>While calling the BPEL i am passing two parameters
jndiLocation = eis/Ftp/SoaFtpAdapter
and
directoryName = /in/dev
Following is the fault that I am getting while executing the BPEL.
<fault>
<bpelFault>
<faultType>0</faultType>
<bindingFault>
<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'FileListing' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. RunTimeConfigFTP:FTPFileListAdap [ FileListing_ptt::FileListing(Empty,filelist) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/Ftp/SoaFtpAdapter12'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/Ftp/SoaFtpAdapter12. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary>
</part>
<part name="detail">
<detail>JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/Ftp/SoaFtpAdapter12'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/Ftp/SoaFtpAdapter12. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server </detail>
</part>
<part name="code">
<code>12510</code>
</part>
</bindingFault>
</bpelFault>
</fault>It seems that FTP Adapter is not picking up the value from jca.jndi property.
How to handle this situation.
Thanks
Ajay

Hi,
Since I am working on BPEL 2.0
Following changes solved my problem.
In the invoke activity, I replaced the following xml tag
 <bpelx:inputProperty name="jca.jndi" variable="jndiLocation"/>with following
 <bpelx:toProperties>
 <bpelx:toProperty name="jca.jndi" variable="jndiLocation"/>
 </bpelx:toProperties> And now my invoke activity looks as follow.
 <invoke name="Invoke1"
 partnerLink="FTPFileListAdap" portType="ns3:FileListing_ptt"
 operation="FileListing"
 inputVariable="Invoke1_FileListing_InputVariable"
 outputVariable="Invoke1_FileListing_OutputVariable"
 bpelx:invokeAsDetail="no">
 <bpelx:toProperties>
 <bpelx:toProperty name="jca.ftp.Directory" variable="directoryName"/>
 </bpelx:toProperties>
 <bpelx:toProperties>
 <bpelx:toProperty name="jca.jndi" variable="jndiLocation"/>
 </bpelx:toProperties>
 </invoke>Thanks
Ajay

Mid-process Receive (onEvent) is not picking up published event

We have a composite (CompositeA), which has 2 BPEL processes (bpelprocess1 and bpelprocess2). bpelprocess1 is synchronous and bpelprocess2 is a one-way. bpelprocess1 receives a message from the client - then sends the message using a one-way Invoke action to bpelprocess2 - bpelprocess2 transforms the message and assigns some values - then sends the message to Event1 through an Invoke action - bpelprocess1 has a Receive activity waiting for an event from Event1 - then it will send the message back to the client as the Reply. Everything works up to the point where the bpelprocess1 Receive(onEvent) activity is waiting for an event, it sits in this "Pending" state until the SyncMaxWaitTime value has expired and then we get a timeout error (see below).
"Waiting for response has timed out. The conversation id is null. Please check the process instance for detail."
So our question is, why does the Receive(onEvent) in bpelprocess1 never pick up the published event? We've run some additional tests to ensure the event is being published, and that has been confirmed.
Is it possible to receive an event that was published during the current instance of the process (i.e., since bpelprocess1 invoked bpelprocess2 which invoked the Event1 publish, can bpelprocess1 perform a mid-process Receive of the event that was just published?
Please let us know if this makes sense or if you have any additional questions.
On a side note, if we create an independent mediator component in the same composite and have it subscribe to Event1 as well, then just write the message out to a file. It would not pick up the message from the EDN in the scenario described above, if we set the property nonBlockingInvoke=true or bpel.config.transaction=requiresNew on the bpelprocess2 partnerlink from bpelprocess1, the Mediator would get the message from the EDN, but bpelprocess1 still timed out waiting for the event. If we setup another BPEL process (bpelprocess3) in the same composite (though not linked to bpelprocess1 and bpelprocess2) and it has a mid-process receive onEvent listening for Event1, it does not pick up the published event either, so seems to be an issue with the mid-process receive onEvent in the synchronous BPEL process.
Any help is appreciated.

Thanks for the reply, but there is no issue with the one-way from bpel1 to bpel2, we do not expect nor want a response from bpel2, it should just publish the event and complete. The bpel1 should continue it's flow (which it does) and the next action is a Receive action listening for an event (that was published by bpel2), but the Receive never finds the event.
Here's a less complex use case:
1. bpelprocess1 is a synchronous process which publishes to Event1 (this completes successful and returns a success message to the client)
2. bpelprocess2 is an asynchronous process which has a mid-process Receive action that is listening for Event1
3. bpelprocess3 is a process which is initiated by Event 1
If we execute bpelprocess2 it will set at the mid-process Receive action in a PENDING state, waiting for Event1 to occur.
If we then execute bpelprocess1 the Event1 is published and we receive a "SUCCESS" response back.
At this point bpelprocess3 is initiated (b/c it's initial Receive is triggered by Event1)
We would also expect the mid-process Receive in bpelprocess2, which is in a PENDING state to trigger, but it never does.
Hopefully this use case makes more sense.

'Move order pick slip report' Report not picking XML publisher Template.

Hi,
SUB: i have to create one XML report on .RDF(move order pick slip report).
Submitting procedure move order pick slip report : i have created one Discrete Job and released that Job, then Component pick release for that particular job. then move order number will generates. then automatically fires the 'Move Order Pick Slip' Report.
NOTE: what i meant to say is i am not submitting the report from SRS window. it will fires automatically when Component pick release.
For this i have taken .xml and generated .rtf according to my layout and i have registered with XML publisher also.it is correct . But while running the report i am geting output as XML codes not in template(wht i have .rtf) format.
if i have to see the output in template from. (i have taken in conc program output as XML also) still same problem.
please help me if anybody having solutions.
Thanks
Valli

Hi Valli,
1:The first thing i would suggest that please check the BI Publisher version you are using (on apps/and on template builder also).
2: In any case if your report is not picking up the template and generating the xml output , i suggest you to attach one program "XML Report Publisher" in your SRS.
Oncwe you run your report and its generate the xml output. you have to take the request id & from view ---> submit request--->XML Report Publisher. run this request again.
it will ask for the request id , select the appropriate request id and it will generate the pdf output as per your requirement.
But this is temporary solution , i strongly recommend you to check the updated version of BI Publisher and instaal it on your oracle apps instance. also use the updated version of bi publisher for Layout(Template Builder).
Regards
SRatnesh

Control Code from Material not picked in Sales Order after EHP4

Hi Gurus,
We have updated Enhancement Package 4 for one of our client.
It is observed that the system is not picking the values maintained in Control Code of Material master. We have some pricing condition types maintained using the combination of Control Code and other fields, which are not being determined automatically.
The data is maintained in J1ID for this material and plant combination and it is also filled in material master.
Please help.
Thanks in Advance.
Regards
Vamsi.

Hi Vamsi,
We are also facing the same issue after EHP4 upgrade. Please let me know how you have fixed that issue.
Thanks
Rehan Manzoor

File to Idoc - File not picked up

Hi experts,
In the file to idoc scenario when i post a file in the file server it is not picked up by the file adapter. But in the communication channel monotoring it reports 'Process finished sucessfully'.
Help me out in this issue.
Regards
Santhosh Kumar V

HI Santhosh
if you are using NW latest version.check in Communication channel monitoring
otherwise in Adapter monitoring.
Check u r Sender Communication channel working or not... in RWB->Component monitoring->Communication channel monitoring..
in which color it is displaying u r Sender Communication channel?? If it is in RED color then u r sender cc is error one.
Check the following:
1. Name of the input file and the filename in communication channel should match.
2. The communcation channel is activated
3. The folder path is correct.
4. The Processing mode is "Delete"
5. XI server is up when u try the scenario
6. The adapter has status green in RWB Adapter Monitoring
7. Sender Agreement is properly configured
As explained above
See ,,
--Check the FTP server details
--Check the User.pwd and authorisations -- to read file,
--Check the File name sapecified in sender CC, and check the file i spicked by CC or not in RWB channelmonitorservlet
by http://host:port/mdt/channelmonitorservlet
--Also see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
/people/sravya.talanki2/blog/2005/08/23/sender-xi-ftp-adapter-with-regular-path-expression-150-abap - Sender XI FTP Adapter with Regular Path Expression ABAP
Cheers..
Vasu
** Reward Points if found useful **

Xi server not picking up the file

Hi,
My Scenario is flat file to xml.I have declared all the file content conversion parameters and placed the input file in server.But the thing is XI server is not picking up the file.What could be the error.Does any error in content conversion has to do with XI-Server not picking up the file.
Thanks,
Srinadh

Hi Bhargav,
go to SXMB_IFR -> Runtime Workbench -> component monitoring -> adapter engine -> adapter engine monitoring or to communication channel monitoring to see the error in your sender file adapter..........rectify this error in comm channel in ID.......set filemode to delete..........then activate yur comm channel.........then your source file will be picked by XI........
Thanks,
Rajeev Gupta

Regarding pricing not picking from contract while creating service entry

hello,
we are facing a problem -we have created a contract with a service item and made a purchase order with the same reference as well. problem starts while creating service entry sheet while adopting the services its not picking the rate from the contract. please guide us how to proceed further.
thanks,
ritesh

Hi Ritesh,
please check the pricing date in the contract service item and also in the entry sheet header. The price could be probably not found due to different validity of the pricing condition in contract - the price from the contract is not valid on pricing date of   the service entry sheet.
The price in SES is determined on the base of the value in the
field 'Price Reference Date of Entry Sheet' (ESSR-LBLDT). This field
is located on 'Basic data' tab.
However, enhancement SRVESSR (customer exit EXIT_SAPLMLSR_010) can
be used for changing this behaviour.
Regards,
Edit

Delta Extractor Is not picking changed values

Hi All,
When the values or texts in a PO are changed the delta extractor is picking up the changed values as deltas (provided the changes where done in PO Header or Item Overview) but when a PO values or text that are changed in the Item Details the delta mechanism is not picking up the changed values (the fields whose values are changed were initially not in the LO Cockpit Extractor they where added and the values to these fields are populated using an ABAP Program)
Is there a reason that Delta mechanism doesn't work for fields that are not delivered by the SAP Extractor or do we need to modify the code in order to collect these changed values by Delta Mechanism (Direct Delta as the Update Mode).
Please let me know if anybody came across the same problem .
Thank you all in advance.
Regards,
Dhanam

Hi,
this is another story.....
You'll have to
- enhance the PO items table (EKPO) with your fields
- activate the right customer exit for purchase orders (search in SMOD; or in this forum..) and populate your fields during this exit. if the field needs to be maintainable by the R3 user, you'll have find a SAP exit (again SMOD) in order customize one of the screen and populate your fields in R3.
- use another exit to populate the new fields to LO delta queue
- enhance your BW extract structure (done)
- and so on...
As you can imagine, the above get quite more complicated (an expert in MM shall support you) and it needs to be approved by the PM since you'll modify R3.
But that's basically it!
hope this helps...
Olivier.

Enhancement of component ERP_H with a custom field in the Web UI

Hi,
I'm facing an error when enhancing the component ERP_H with a custom field in the web UI.
I've followed the steps mentioned in the pdf document called "Enhancement Options for the Lean Order Interface" (Note
1224179):
I´ve done a enhacement on ERP_H component.
I added a field to the view Headerdetail called "ZZCCTYPE1", but when I set a value in UI, I haven´t read this field in abap code.
The SET method (SET_ZZCCTYPR1) in the context node is ok, in debug I see that the method current->set_property, is working fine.
I've tried to read the atribute with lr_entity->get_property_as_string ( 'ZZCCTYPR1' ), but doesn´t work. When I read other "standard field", the statement is ok and it has value.
When I set the value of the field from ECC (VA01/VA02), it is kept by the system.
Could anybody help me?
Thanks in advance,
Regards,
Andrea Ricci

Hi,
To add a new field, you have to first create it through T-Code EEWB where in you create a project, create extension which is assigned to a business object and create the new field through wizard - specifying the field name , type and length.
Once this is done, you can check the new field coming up in available fields for the relevant component's view in Tcode BSP_WD_CMPWB.
Hope this helps you out.
Cheers
Ravindra Valy
"Award Points if it is helpfull"

Enhancing the component ERP_H with a custom field in the web UI

Hi,
I'm facing an error when enhancing the component ERP_H with a custom field in the web UI.
I've followed the steps mentioned in the pdf document called "Enhancement Options for the Lean Order Interface" (Note
1224179):
I´ve done a enhacement on ERP_H component.
I added a field to the view Headerdetail called "ZZCCTYPE1", but when I set a value in UI, I haven´t read this field in abap code.
The SET method (SET_ZZCCTYPR1) in the context node is ok, in debug I see that the method current->set_property, is working fine.
I've tried to read the atribute with lr_entity->get_property_as_string ( 'ZZCCTYPR1' ), but doesn´t work. When I read other "standard field", the statement is ok and it has value.
When I set the value of the field from ECC (VA01/VA02), it is kept by the system.
Could anybody help me?
Thanks in advance,
Regards,
Andrea Ricci

Hi Pooja,
When you created your custom views, did you bind the view context nodes to the corresponding context nodes of your component controller?
From the exceptions you reported it seems that this binding is missing.
To create this binding, you can right click on your view context node , choose "Create Binding" and bind it to the context nodes of your Component Controller.
Hope this helps.
Regards,
Nisha

Enhancement to component not picked up

Similar Messages

Maybe you are looking for