Enhancements is not active and cannot be transported

Hi All,
We are getting following error message when releasing a Transport request in CRM system which is on 7.0 version on MaxDB.
"Enhancements is not active and cannot be transported".
The strange thing is that the Tasks underneath are all released successfully , but only the TR is not getting released.
Also, the logs in transports do not point to which enhancement is not active as well.
Any help in this issue is highly appreciated.
Regards,
Murali Narayanan

Hi Murali,
Go to the enhancement and check the tables.fields,includes and it request nos.Go to that transport request ,double click on that see what and all there under it. Post if need help.
Regards,
Madhu.

Similar Messages

The iPad you connected is not recognized and cannot be activated for servic

Hi there,
Today I've received a replacement iPad (from Apple), and surprise surprise, when I connected it to iTunes for proceed with the initial setup, the following message arised
We're sorry, the iPad you connected is not recognized and cannot be activated for service.
We recommend you visit your nearest Apple Store for more information.
I've contacted with my local apple support, and they told me to try to reinstall the iPad entering in DFU mode. I did it twice, and both times the procedure went perfectly but once finished the above message appeared once again.
They have told me to send it once again for repair, but, someone knows how to resolve this ? I've sent my previous iPad ten days ago, and now, I will have to wait other ten and I'm a little bit dissapointed.
Well, thanks in advance and merry christmas for all of you.
julio

They should pay to overnight pickup and overnight delivery back to you since it's their screwup. Ask them!

Adobe Acrobat XI: Error Adobe Acrobat is not activated. Cannot create PDF File.

After installing Acrobat XI Pro on Windows 7 Ent. w/Office 2010.
From MS Word, select Save as PDF, I recieve "Adobe Acrobat is not activated. Cannot create PDF file."
Any and all troubleshooting has failed.
Uninstall Acrobat, language packs, re-install, install updates, Install on fresh image.

kglad your link refers to Windows XP. As to the rest it is questionable. First of all it would be nice to know the cause, before fixing the problem. For in some cases eliminating the cause will solve problems later on. So, in my case for ex. The problem did not exist until I protected my Word 2010 document and then saved it to PDF--which it would not allow to do so and giving the error message stated above.

How do I change the default apple id (email address) that is prompted on my iPhone? It prompts me with an id that I do not have and cannot access.

How do I change the default apple id (email address) that is prompted on my iPhone? It prompts me with an id that I do not have and cannot access.

When do you get prompted for this ID? If you are asked for an AppleID
you do not know during Activation, contact the seller for assistance. Only
the person who set the Activation Lock can remove it. If the seller refuses
or does not know the requested AppleID and passcode, return the iPhone
for a full refund as it is useless. There is no work around for Activation Lock,
The person who set the lock needs to follow the actions in this link:
Prepare your device to sell or give away
You can check if Activation Lock is the problem here:
https://www.icloud.com/activationlock/
That link will only tell you if the iPhone is Activation Locked - it will not provide
any information about the source of the lock, nor can you get any information
from any source other than the original owner of the iPhone/person who set
the lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
This happens a lot regardless of the web page. I continually have to restart FF and it persists still

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

The URL is not valid and cannot be loaded

seems like maybe firefox mishandles untrusted certificates?
It gives error: Alert The URL is not valid and cannot be loaded.
example:
https://notes.corp.cat.com/
other browsers can load this URL just fine. When I visit it in Firefox, I get the error in a simple little message box with a yellow triangle exclamation point, titled "Alert".
ALSO.... when I click the "Home" button in firefox, I get the error, and the home page does not load. Currently the home page is set to "Mozilla Firefox Start Page."
changing the home page to: http://www.google.com/ allows the home page button to work normally.
restoring the home page to default brings the error behavior back when clicking the home button.
changing the home page to: https://notes.corp.cat.com/ produces the same error, just like when I manually type in an https URL with a funky security certificate.
This problem only seems to happen on secure URLs with untrusted certificates, i.e. sites that are too cheap to pay to have their certificate registered with one of the certificate vendors or however the hell that works, so as a result every time you visit their web site, your browser starts to whine that it might be a forgery or whatever.
It used to be in Firefox that I could load these pages and just specify that I want to trust the site anyway. Now firefox gives this error that doesn't allow the user to know what is really going on or what the reason for the error is. It is as if the developers decided that users are too stupid to decide if they really want to visit the site or not, so as a result Firefox is just refusing to visit any web sites where the authenticity of the certificate can't be verified? Hey, it's not a bad idea, to be honest. :-) But it's kind of annoying, because here I am, sort of smart enough to know what I'm doing, but I don't have the choice in the matter...
I restarted with all add-ons disabled and that didn't help. I don't have much installled in the way of add-ons anyway. All I have is JAVA quick starter 1.0, and Adobe Acrobat, Java development toolkit, Java platform SE, Microsoft DRM, and Windows Media Player Plug-in Dynamic Link Library. Not even Flash. All the above is disabled now that I rebooted with add-ons disabled, and I still have the issue.
thanks for any help you can provide.

Please [https://bugzilla.mozilla.org/show_bug.cgi?id=713167 see this.] Installing [https://www.microsoft.com/download/en/details.aspx?id=5638 Visual C++ 2005 SP1] or the .Net Framework 3.5 SP1 may help mitigate the issue.

When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.

Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

How do I enable Firefox 4 to do a search on more than one word (e.g. "yahoo mail") without receiving the error message "the URL is not valid and cannot be loaded"?

After loading Firefox 4.0, I changed the address bar search engine to Google Search by Name, so I'd be taken straight to the most relevant webpage when I type in a word.
It works fine when I type in one word, but if I use a search with more than one word (e.g. "yahoo mail" or "google maps") I get an alert saying "The URL is not valid and cannot be loaded". Is there any way I can fix the address bar to accept multiple word searches?
I've tried disabling all my add-ons, but it didn't make any difference.

Hi, this should sort out your problem:
1. Type in "about:config" into the address bar, this will open the settings menu. Click on "I'll be careful, I promise!"
2. Search for "keyword.URL" in the filter bar.
3. Enter "http://www.google.com/search?btnI=I%27m+Feeling+Lucky&q=" into the value field.
I'm no expert, but I had the same problem which got on my nerves after being so used to being able to type anything in, and following these steps fixed it.

I'm not able to open a catalog. It says it is not writable and cannot be opened.

This has been happening to me for the past few weeks. If I close my LR5 program and try to re-open the catalog I get a error message that says
Lightroom cannot use the catalog named "Lightroom 5 Catalog 2014" because it is not writable and cannot be opened.
This could be caused by incorrect permissions or because another Lightroom application is using the catalog. You may try to correct the problem or you may select a different catalog.
Then I have the option to choose a different catalog / try again / Exit
I have to go to the backup every time. I am currently working in Windows 8.1
Please help!

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloadi

why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

Disk Utility says of USB Drive - "This partition can't be modified" "This disk is not writeable and cannot be partitioned"

Several months ago I bought a 64GB PNY USB memory stick to transpord data quickly.
It seemed to work fine. I could format it as a Mac partition and use it. I hardly ever need
it so I just put it away.
Today I wanted to use it to put a file on and take it to the Kinko's/FedEx to print, and I
find I cannot mount it on any of my computers, iMac, MacMini or MacBookPro.
In Disk Utility virtually everything is greyed out.
Disk Utility says: "This partition can't be modified" "This disk is not writeable and cannot be partitioned"
If I try to mount it, it says "This disk cannot be mounted"
There is no physical read-only switch or setting on the disk that I can see and it is very small.
I has a Mac OS installed on it, so I wonder if that is a problem? I should be able to write over that
or reformat it I would think.

Thanks for these replies.
I've got regular time machine backups and just backed up some of my data by copying some key folders to an external drive. I'm bit paranoid about backup integrity and would ideally like to do another full backup to a different drive using a system other than time machine, in the event that something goes wrong with the time machine backup. Any recommendations on good and affordable backup software to do a backup of my TM backup?
One other question: I seem to encounter problems like this pretty frequently. I'd say once a year or so, my drive fails completely or gets near enough to failing that I have to wipe and restore. (I've never had a TM backup fail to work, though the last go around there were some hiccups which has led to my backup paranoia.) I've had this happen on multiple computers, so I'm becoming pretty convinced that the problem lies somewhere in my data. Is it possible (even likely) that there's something in my data causing this recurring problem? If so, is there anything I might be able to do to try and pinpoint and address this problem? I'd love to go one year without having to wipe/restore my machine!
For a while I thought I just had bad luck. But I think this is like the 4th or 5th time this has happened in the past 4 years and every time, I'm restoring from a backup, so I come back with the same data. It's the one constant since I've had 3 different machines over this same time period.

The certificate is not valid and cannot be used to verify the identity of this website

Question posted in Stack Overflow too: java - How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error? - St…
The question is, How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error?.
Here are the details:
I have a signed applet that has been working fine, until I updated Java to 8u25 (1.8.0_25-b18). Now, the application shows an alert message "Do you want to continue? The connection to this website is untrusted". There is a note in this message too, "The certificate is not valid and cannot be used to verify the identity of this website".
The applet is loaded without problems. But when the user tries to use a specific function of that application, the warning message is displayed.
I've checked the java console when this happens, and this warning message is displayed right after these lines:
security: Obtain certificate collection in SSL Root CA certificate store
security: Invalid certificate from HTTPS server
network: Cache entry not found [url: https://sub.domain.net:9876, version: null]
The application is downloaded from a different domain, say "https://app.domain.net/ .....", so no jars are downloaded from "https://sub.domain.net:9876 ", but the applet connects to "https://sub.domain.net:9876 " to send/receive data.
The applet is signed correctly, and so far, it meets all the security requirements according to Java. This issue seems to happen when the application tries to connect internally with an HTTPS url like https://sub.domain.net:9876. That sites' SSL certificate is valid, issued by GoDaddy and has not expired.
Again, this started to happen after updating my JRE to 8u25. I've tested adding the offending URL to Java security exception list, with no success.
Here are a few screenshot of this problem:
This is the warning message displayed:

For what it's worth we discovered what the issue was. When we installed the new certificates onto our servers we also discovered that you have to install the certificates of all intermediate servers listed in your certificate. This mean that all URLs listed on your certificate, have to have the intermediate certificate for the certificate authority installed. This also includes all the Alt Names of your domains, even if they do not use the applet.

Continously get an alert: "URL is not valid and cannot be loaded."

Every time I open a new page I see this error. Could it be connected to the Google Chrome add-on? I see that add-on the first few times I open a new tab then it disappears and I start getting this error.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*[[/questions/908165]] The URL is not valid and cannot be loaded

Url is not valid and cannot be loaded

Hi all,
I have a problem with https sites with sefl signed certificate. On other firefox version (3.6.x ...) when i connect to the first time on this sites, a page ask me if i want to add a security exception and add the certificate to my certs chain. Since i have installed firefox4b10, i have a messagebox that say "url is not valid and cannot be loaded"
I have tested firefox4 b10 in safe mode, but nothing change. i run firefox 3.6.x, i get the security exception page, add an exception and then, i stop firefox and run firefox4b10, and now that the certificate is in registered, the site worked fine.
this happen both on windows and linux
Any help on this ?
Thanks.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Enhancements is not active and cannot be transported

Similar Messages

Maybe you are looking for