Enhancements points in standard code

hello!
Can I use enhancements points in standard code? How do it?
Thanks!!

Yes, you can. That is really the whole point, as you would not need enhancement points in a custom program.
In order to leverage the Enhancement Framework, you should familarize yourself with the documentation and then go from there.
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Regards,
Rich Heilman

Similar Messages

Trying to add enhancement point in standard code

Hi,
i am trying to add enhancement point in standard code using the steps givenin the link.
http://www.sapdev.co.uk/enhance/eframework/ef_implicit.htm
but i am not able to get the enhancement point .
Could you please let me know if there is anything additional steps to be followed.
or are there config setting that has to be checked.
Regards,
saleha

Hi Sandra,
when I try to create an enhancement point by pressing enhance (shift-f4) going in edit->Enhancment operations->Create it gives me a message 'In this mode you can create implementations only'. (At this point my cursor in the code is at the point I want to make it happen)
So the Q is how do I get the E.point in the code at the point I desire.
Regards,
Saleha

Enhancement Point in ABAP code

Hi ,
I am working on an upgrade from 4.6 to ECC ,so have a have a standard FM with an enhancement point , how do i know if there is an implementaion for that or not and can i debugg the code in the enhancement point .
When i click on the enhancement spot it goes to a class and i can see the code in that methods but cant set a breakpoint in it , kindly suggest what should i do.
Regards
Arun

Hi
double click on the enhancement point. it will take you to the enhancement spot into which it is defined.
click on the tab "enhancement implementation". it will show you all the existing implementation. I you find nothing than this point is not implemented yet.
if it is taking you to a class then it is a BADi implemented via new enhancement framework. to find it is implemented or not, repeat the above steps. to debug it:
in the left section, expand entries under heading BADi definitions.
double click on "implementations". you will get the existing entries on right side. double click on this entry. on the left side under heading "BADI definitions" you will get the implementing class.
double click on it to get the class name.
go into the class and see the method implemented. u try to hard code the break point into the method,
activate it and then try to debug it.
Thanks
Vishal Kapoor

Enhancement points in ECC6.0

Hi Friends,
can anyone please share the documents related to enhancement points (spots) in ECC 6.0?
Regards,
Ravi.

Enhancement points - Changing standard SAP code using the implict and explicit enhamcement points
Enhancement points are basically hooks at certain defined points within the ABAP code i.e. at the beginning and end of a FORM. These hooks allow you to attach your own custom code which will be executed as if it had been hard coded into the code using a modification. Unlike hard coded modifications these will not be lost during upgrade or patching exercises.
There are 2 types of enhancements with the enhancement framework:
1. Explicit enhancement points: These are basically hooks already coded into the program by SAP at various points of the code. See program RIAUFMVK for examples of these! These are very easy to implement simply go into enhancement mode of SE80 and right click on the enhancement point where you want to add your code and choose u2018Enhancement Implementation->Createu2019 Give it a name, description and assign it to a change request (should not be a Z package) and then simply add the code as normal.
2. Implicit enhancement points: These are basically points within ABAP code where an enhancement point is implied, and in which case can be created. Examples of implicit enhancement points are at the beginning and end of FORMu2019s, at the end of a program, include or function module etc. Click here for demonstration of how to implement an implicit enhancement point!
Search for enhancement in sdn you will get demo also.

Enhancement Point Creation

Can we create our own enhance point in standard program ie I want to create a point where i need to change & implement the new logic at that point.plz suggest

Hi ,
You can create your own enhancement points.Go to the standard report in which you want to add your own code.Press SHIFT + F4, ths standard code will come in Edit mode , but you can not edit it.
Now goto
EDIT ->Enhancement operations ->Show Implicit Enhancemet Options.Yellow lines will come at few places.These are the points where you can create your own enhancement points and add your code.You need to figure it out , where you can add your code. Right click on the yellow line ->enhancement implementation -> create, here you will be asked whether you want to create declaration or write your code.At the begining of the enhancement point you need to write declarations.
At the end of the enhancement point , again follow same procedure , here you need to write your code logic.
And then you have to activate the enhancement point.
Hope it helps
Edited By
Tejaswini Khante

Enhancement Point in MIRO transaction

Hi all,
Can anyone let me know the enhancement point in t-code MIRO before saving the document. Plz let me know if there is any enhancement spot.. plz help me out in this issue.
Thanks in advance.

hi
good
Following user exits are present in MIRO
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
thanks
mrutyun^

Does Web Dynpro support adding Enhancement Points/Sections

Hi,
Can someone answer whether the ABAP Web Dynpro framework is supposed to support add enhancement points/sections to code within a component method?
Cheers
Michael Arter

hi,
check out this link :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/c21ba177be3376e10000000a421937/frameset.htm
also check out the foll post:
Pre-Exits and Post-Exits for WDA
hope this will surely help you!!!
Thanks & regards,
Punit Raval.
Edited by: punit raval on Jul 9, 2009 10:53 AM

Sap support for standard prog. w/ custom implem of implicit enhanc.points

Hello,
since 1 year I've been confronted to SAP customers which WIDELY implement Implicit Enhancement Points (IEP).
I have been really surprised that my customers undoubtly think, if a problem occurs in a standard program where there are lots of IEP custom implementations, and if my customers estimate after investigation the problem comes from the standard part and not from the IEPs, they think that SAP support would help them to solve the issue.
Note: as a consequence, they created much more IEP in ECC 6 than they did in the past with R/3 old releases (via changes of the standard, aka repairs)!
What I think, is that SAP SUPPORT WOULDN'T HELP them as long as there is custom code (even within IEPs) in the standard program, even if there is only one IEP with one line (because it could change completely the standard algorithm, for example by emptying a global internal table)
So, I think the only way to get help from SAP is to deactivate these IEP implementations before requesting support. And so, the only solution to deactivate them, customers MUST assign IEP implementations to a package and then to a switch and then to a business function, so that they can deactivate it via switch framework.
The main concern is that my customers didn't create switch/business function, so they cannot react quickly if a problem happens in production : reproduce in test system, deactivate custom IEPs by switching off business function (it's what they didn't do), reproduce with full standard to determine problem comes from standard, request help from sap).
Could you share with me what is your approach about implementing IEPs, and maybe, is there somewhere a SAP documentation which explains that officially?
I hope I was clear.
Thank you very much for your kind help.
Best regards,
sandra rossi

I played around a bit with this (as I had never done it before) and also from what I have read, the intended option is the switch framework.
I guess as plan B you could have a virtual system or reliable test environment in which you can disable the enhancement and bring it back again via version management - but from what you have described (IEP deleting gobal variables, etc) this would also remove the "bug" and make the problem difficult to reproduce.
Perhaps the next best thing (unless someone has a better idea) is to inform your customers about neatly organizing their software developments using packages and switches.
To my knowledge, the syntax checks are also getting stricter in this area (as you may have noticed) and I hope that (for some of them) will throw errors one day during the development stage already.
Sorry, that does not help you much (but at least you read "the rules"
Cheers,
Julius
ps: A dirty way of doing it would be to run the program in the new debugger, and skip over the enhancement using the Go-To function. Unlike the classic debugger, the code inbetween does not need to be debugged. Ugly, but effective...
Edited by: Julius Bussche on Nov 10, 2008 9:13 PM

Standard code modification with enhacement points..

hi,
i need to modify a couple of my standard programs. I have been suggested to follow this approach.
first get the acces key and go to change mode. then where u want to insert ur code, click on the insert button and get the insert block. Then here I need to have an implicit point !! how do i create that ? where do i associate these enh points to an enhancement spot ??
also, the advantage stated is that tomorrow if i dont need this modifications, i can just simply switch off the enhancement spot ?? or point ?? i am not sure ? any details on that ?
another question is what happens when tomorrow sap changes this standard program. will my enhancement point/spot remian intact ?? what do i do to reapply my changed code as enh points ??
can anyone please throw some more light on all these ??
thks

[Enhancement Framework>> |http://wiki.sdn.sap.com/wiki/x/cwXEB]
"another question is what happens when tomorrow sap changes this standard program"
SAP would use some logic, which will make sure they are not spoiling the enhancement points...
rettkomv = xkomv.
perform (^*&*&&*) using xkomv from saplv61a if found. "<< I can only remember this for now..
xkomv = rettkomv.

How to know where the user exits or enhancement used in standard sap code?

Hi
I m pretty new to abap.
How can I know where the user exits or enhancement used in standard sap code?
As i have to add some functionality to the standard sap code. I m looking to search the enhancement or user exits used in this standard code wher i can add my functionality.
thanks in advance.
Moderator message : Search for available information, thread locked.
Edited by: Vinod Kumar on Oct 19, 2011 2:38 PM

Hi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas

Enter code in enhancement point

Hi,
Please tell me how i can insert code into an enhancement point. My enhancement point is ENHANCEMENT-POINT MM06BF0B_BUCHEN_01 SPOTS ES_SAPMM06B.
<removed_by_moderator> Thanks.
Edited by: Julius Bussche on Aug 26, 2008 12:51 PM

Hi Charles,
Click on the 'Enhance' button (button lying before the 'check' , 'activate' buttons) of the include MM06BF0B_BUCHEN which contains the enhancement point.
Then right click on the enhancement point and select Enhancement Implementation -> Create. Give your enhancement implementation a name and description. Provide ur code under the enhancement point. Finally activate the implementaion by clicking on the button having symbol '(Activate symbol) Enhancements'.
Regards,
Soumya.

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

How to avoid displaying date,time using Enhancement point.

Hi friends,
i have to work on the standard report.
stadard report displays date,time ,reportname on the top of the page. my requirement is not to display date ,time,reportname.
they have used the following code,
WRITE text-001 TO m_line+d_offset(4). " Time
WRITE sy-timlo USING EDIT MASK '__:__:__' TO m_line+d_offset(08).
WRITE text-002 TO m_line+d_offset(05). " Date
WRITE sy-datlo DD/MM/YYYY TO m_line+d_offset(10).
BY using Enhancement point how to achieve my task.
kindly help me

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
basham,
You didn't mention which type of DBMS you are using (i.e. Oracle, MS SQL, MySQL, etc), but in a nutshell using MS SQL here is the principle. Your time that is recorded in the records is dependent upon a setting in your RDBMS. For instance, the RDBMS can use the machine time (which would most likely be local time), or it can use the machine time with an offset (to accomodate GMT, for instance). GMT is factored differently based upon your time zone (and time of year, i.e. DST or EST, etc). I'm on the east coast so right now my offset is GMT - 5, so if my time right now is 1457, then GMT is 1957. To get SQL to compute an offset you must take the number of hours to offset and divide by 24 (24 hours in a day) and add that to the record in the database. For instance, to get GMT right now I would use:
select cast(getdate()5/24. as char(12))rtrim(convert(char(12),getdate()5/24.,8))' GMT'
Hope this helps. If you're on Oracle, then the mathematical principles remain the same, just the formatting will be different.

Copying function module & program with all ENHANCEMENT-POINT

Guyz,
i'm on ecc6.0 and want to copy a standard report and FM with all its enhancement points. Can i do ? Kindly let me know how to do the same ?
Thanks

Hi,
Enhancement frame work is the new concept using which SAP allows you to change the existing programs
See the following blogs that talk about the same in detail
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Check the theard also
https://forums.sdn.sap.com/click.jspa?searchID=3456104&messageID=2839972
<b>Reward points</b>
Regards

Enhancements points in standard code

Similar Messages

Maybe you are looking for