Enhancer, schematool and Jboss issues

1) When running the enhancer tool twice the schema tool throws an
"Repetitive field name/signature" exception.
2) This one is weird and really annoying. When running the schema tool
twice I get a "java.sql.SQLException: java.lang.Class NotFoundException"
exception on some persistence capable class (typical the last one defined
in the package.jdo). Only when deleting the JDO_SCHEMA_METADATAX table the
error goes away. Any ideas what's going on here?
3) Deployment in jboss works again, but redeployment is still not working
Any ideas when these issues will be fixed.
I'm running rc1, jboss 3.0.0, wnt, sql-server
Thanks
Jesper

Jesper Ladegaard wrote:
2) This one is weird and really annoying. When running the schema tool
twice I get a "java.sql.SQLException: java.lang.Class NotFoundException"
exception on some persistence capable class (typical the last one defined
in the package.jdo). Only when deleting the JDO_SCHEMA_METADATAX table the
error goes away. Any ideas what's going on here?I also encounter this problem every time I want evolve my schema in
JBuilder7.
I think it must be a bug introduced in v2.3.0RC1 since v2.2.6 works fine.
However, in command line, this problem seldom occur! Why?

Similar Messages

Log4j and JBoss issue

Hi ,
     I am working in Log4j for my web application.
     I am using Eclipse2.1, Log4j 1.2.8, JBoss 3.2.2
     I am having problem in the log4J concepts.
     I am using my own Logger.java.
     I have set the root category in the Log4j.properties to the WARN.I am using File appender.
     Then I have used log.debug(), log.info(), log.warn(), log.error(), log.fatal() in my applications.
     Even when I set the root category as WARN, it enabling all levels and appending the information of all the levels in the file.
     So I started to analyze the code.
     So I set the eclipse in debug mode and stated the application.
     When it comes to the line logger.log() , when I place the cursor on
          1) logger - it shows org.apache.log4j.Category
          2) log - it shows as org.jboss.logging.Logger
     So I understand that, it inherits the log4j properties from the jboss.
     So all the levels get enabled.
     So i want to know, how to override or disable the Jboss's inbulit Log4j.
     Please help in this tough suitation. I am trying this for last 2 days.
Thanks and Regards
Mohan.

This question is off topic for this forum. In the future please only post specific questions about Sun's J2EE SDK and its related technologies. For this type of question why not try the JBoss forums or the Log4J mailing list.
http://jboss.org/index.html?module=bb
http://logging.apache.org/log4j/docs/contactUs.html

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

Enhancement-Point in ECC6 Issue

Hi all,
We recently did an Technical Upgrade from ECC5 to ECC6.
After the Upgrade, during the Syntax Check in one of the custome reports we developed, we are getting an error "The statements ENHANCEMENT-SECTION and ENHANCEMENT-POINT (without the STATIC addition ) can only be used in executable coding".
When I checked, i found that this comes from a standard include I_RFIDYYWT_FICA_SEL which is called inside out custom report. There is an Enhancement-Point without the STATIC addition and this is resulting in this issue.
Coudl you please let me know whether there is any way by which we can deactivate this Enhancement-Point or is there any other solution to over come this issue.
Many thanks in advance,
Regards,
Anoop R.S

Hi,
to find the user exits & Badi's for the T-code..
go to table TSTC>enter T-code and execute> get the Program for the t-code..
and go to-se38-->get the package attached to the t-code..
next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                     execute you will get the list of exits
                                                     available...
                                                  -->enter package under Badi's tab and
                                                     execute you will get the list of Badi's
                                                     available...
All the User exits are stored in Table MODSAP..
Implemeting User-exit..
go to t-code smod -->enter the Exit name --> click on display --> click on components
                                                                  --> clcik on Finction module
                                                                  --> click on include under function module
                                                                   --> it show warning message ignore that and hit enter and write the code
and activate again the SMOD..
Prabhudas

EJB and JBOSS

Hi, My company is currently trying to migrate from Weblogic to JBoss.
We have all the jar, war, and xml file.
However, I'm not familiar with all these.
Could someone explain to me what;s the appropriate things to do.
All i know is that putting the war or jar file in a certain directory on Weblogic would result in those files being deployed.
Would JBoss work the same way?
Can I just put these files and will it get deployed?
I have looked through the web and mostly what they're talking about is creating ejbs from scratch (and .ear file also new thing to me) ... which is too technical for me.
Can someone suggest a solution please.
I'm a newbie to this technology.
All help/reply would be a great help.
thanks in advance.

Greetings,
Would JBoss work the same way?
Can I just put these files and will it get deployed?Yes, JBoss offers a similar deployment strategy. Presuming you are using JBoss 3.x and starting with default configuration you would place your components into ${JBOSS_HOME}/server/default/deploy and JBoss will auto-deploy them - er, assuming there are no errors in your components... ;) If there are errors then these will either be displayed on the console or in the 'console log' file depending on your startup strategy.
I have looked through the web and mostly what they're
talking about is creating ejbs from scratch (and .ear
file also new thing to me) ... which is too technical
for me.
Can someone suggest a solution please.
I'm a newbie to this technology.Where most of your difficulties are likely to play is in configuring your application's infrastructure - i.e. resources, security model, transactions, etc. Application Servers tend to differ quite a bit on such things (rather, on how to do them...), and JBoss is no exception. Furthermore, JBoss does not have a native GUI for these things which may complicate the matter even more. The best place to start for configuration issues is with the JBoss 3.0.x QuickStart Guide. This book-length guide provides a lot more detail on these matters than might be expected from typical "quick start" document and is available in PDF format for free from the JBoss site Documentation page. While you're there, it is worth-while to investigate the commercial documentation offerings on the same page...
All help/reply would be a great help.
thanks in advance.Regards,
Tony "Vee Schade" Cook

Problem Enhancing 2LIS_03_BX and BF - no records added

Problem Enhancing 2LIS_03_BX and BF
Hi, i am enhancing 2LIS_03_BX and 2LIS_03_BF
as i added to the cube 0MAT_PLANT.
In order to get the value i update the UPDR (3.x)
with formula: RIGHT( 11, 0Material )
which is correct.
So far is fine.
The UPDR get activated.
And if i load the cube gets fine.
But i face an issue when transporting it to QAS as, despite the Transport going fine and the UPDR being fine, when i load data using BX or BF it does not add records.
I already set up all necessary stuff in RC, MCNB, LBW, OLI1Bw...
I tested it with and without such little enhancement and without enhancement works perfect.
With enhancement described here does not add records.
Did any face a similar situation ?
thanks a million
alex

Thank you all for your input.
Points awarded.
Though here is the case:
alright.
is all a bit weird.
The scenario is as follows. having a cube copy
from 0IC_C03 fed from 2LIS_03_Bx and 2LIS_03_BF.
I enhanced the cube with 0DISMM and 0MAT_PLANT
on UPDR from 2LIS_03_BX I included
0DISMM is updated with a small rotine
0MAT_PLANt updated with brief formula
I saved + activated.
Was working on DEV.
But once transported to QAS all was fine (activated and so on).
All preliminary steps were done on ECC side (tnx BF11,... LBWG, then mCNB,load...)
But when loading data was transfering records but not adding them
I went through all the custo on R3 side.
Loaded and delted several times from cube and loaded again.
I finally tried to undo the changes in DEV thus leaving the flow to its original status.
Then loading again -in DEV.
All went fine but in DEV even with the changes all was fine.
I decided to move the flow that put it to its original status to QAS.
Loaded BX => went fine
added records to cube.
So basically i removed the changes (a formula plus a little routine)
Transported to QAS.
Then added the changes again.
Transported including changes to QAS.
All is working fine now.
Just lost few days going through the entire pieces Stocks is entailed of.
Hope this weird solution comes to someone´s mind if in a similar scenario as a last resort.

EJB annotations are not documented , versus Hibernate and JBoss seam do

I have an application that contains EJB3 annotations, Hibernate Annotations and JBoss Seam annotations in the java code.
When I generate the javadoc, the Hibernate and JBoss Seam annotations show by the side of the members and methods who has them, like, for example
@Name(value="authenticator")
@Scope(value=SESSION)
@AutoCreate
public class AuthenticatorImpl
<dt>extends java.lang.Object </dt><dt>implements </dt>
or, another example,
h3. facesContext{noformat}@In(value="org.jboss.seam.faces.facesContext",
create=true)
private javax.faces.context.FacesContext facesContext{noformat}
However, none of the EJB3 annotations included in the code are being dieplayed in the javadocs.
Does someone knows if there is any reason why this should happen?
This is my javadoc command:
javadoc -version -d doc2 -sourcepath src\model;src\action -classpath "lib/core.jar;lib/jboss-embedded-api.jar;lib/jsr250-api.jar;classes/test;lib/hibernate.jar;lib/log4j.jar;lib/testng.jar;lib/ojdbc14.jar;lib/hibernate-commons-annotations.jar;lib/hibernate-search.jar;lib/hibernate-entitymanager.jar;lib/drools-compiler.jar;lib/richfaces-impl.jar;lib/jboss-cache.jar;lib/jboss-seam.jar;lib/janino.jar;lib/hibernate-annotations.jar;lib/richfaces-api.jar;lib/ejb-api.jar;lib/mvel14.jar;lib/jbosssx.jar;bootstrap;lib/jbpm-jpdl.jar;lib/commons-beanutils.jar;lib/lucene-core.jar;lib/jgroups.jar;lib/jsf-api.jar;lib/jboss-el.jar;lib/el-api.jar;lib/antlr-runtime.jar;lib/jstl.jar;classes/model;lib/antlr.jar;lib/persistence-api.jar;lib/jsf-facelets.jar;classes/action;lib/richfaces-ui.jar;lib/mail.jar;lib/drools-core.jar;lib/jboss-seam-debug.jar;lib/hibernate-validator.jar;lib/servlet-api.jar;lib/jta.jar" -private mil.navy.med.rota.model mil.navy.med.rota.security mil.navy.med.rota.action.util mil.navy.med.rota.action.util.mpd mil.navy.med.rota.action.mpd mil.navy.med.rota.action.referrals mil.navy.med.rota.model.referrals mil.navy.med.rota.action.trainman mil.navy.med.rota.model.trainman -use -version -author -splitindex
The version of javadoc used is
Standard Doclet 1.6.0.0_3
Aticipated thanks!

Nevermind, the issue was that my persistence.xml did not contain the following property:
<property name="hibernate.hbm2ddl.auto" value="create-drop"/>
Therefore, the tables were not being created upon deployment.
Still, I would expect to see entity beans listed in the WebLogic console.

HD Enhanced program and multiple old set-top boxes

HDenhanced. Sounds like a step forward and should be a good technological advancement. I have been frustrated with the process of getting the equipment. I got the letter in the mail. It's geared toward providing no human intervention. All of the instructions say, "Turn your desktop box to channel 1995 and follow the instructions." I have 2 desktop boxes--a DVR and a basic box--and neither of them is capable of 4-digit channels. So I went online--less-desired option 1--to order a replacement for my boxes. Online it asked for 4 pieces of information: name, account number, phone number, and zip code. Right above the "Submit" button is text that states: "Yes, please send me the correct number of cable boxes." One box was shipped. When I saw the shipping information and that only one box was shipped, I called--less-desired option 2--and got to a human in the HDenhanced department (after being told by a recording to turn my box to channel 1995). I spent several minutes trying to explain that only one box was shipped but the web page told me that "the correct number of cable boxes" would be shipped, so what about the 2nd box? (And in the process was asked to turn my box to channel 1995, part of the script, I'm sure.) The call ended with me having the impression (with a lot of uncertainty) that the other box would be shipped also. Today I received the one DVR box and I installed it. (The instructions say, "install all devices before activating". If only...) I attempted to call a few mins after 7:00 tonight to follow up on the 2nd box, but apparently I need to call back "during business hours". What's the worst that could happen? HD Enhanced is turned on and I don't get one of my boxes replaced for the cutover. It's really not that big of an impact. What bothers me is that the user instructions and support script do not identify HOW the multiple boxes will be handled, leaving the impression that it will happen in one shipment. But it didn't happen that way.

EdBates wrote:
HDenhanced. Sounds like a step forward and should be a good technological advancement. I have been frustrated with the process of getting the equipment.
I got the letter in the mail. It's geared toward providing no human intervention. All of the instructions say, "Turn your desktop box to channel 1995 and follow the instructions." I have 2 desktop boxes--a DVR and a basic box--and neither of them is capable of 4-digit channels. So I went online--less-desired option 1--to order a replacement for my boxes. Online it asked for 4 pieces of information: name, account number, phone number, and zip code. Right above the "Submit" button is text that states: "Yes, please send me the correct number of cable boxes." One box was shipped. When I saw the shipping information and that only one box was shipped, I called--less-desired option 2--and got to a human in the HDenhanced department (after being told by a recording to turn my box to channel 1995). I spent several minutes trying to explain that only one box was shipped but the web page told me that "the correct number of cable boxes" would be shipped, so what about the 2nd box? (And in the process was asked to turn my box to channel 1995, part of the script, I'm sure.) The call ended with me having the impression (with a lot of uncertainty) that the other box would be shipped also. Today I received the one DVR box and I installed it. (The instructions say, "install all devices before activating". If only...) I attempted to call a few mins after 7:00 tonight to follow up on the 2nd box, but apparently I need to call back "during business hours".
What's the worst that could happen? HD Enhanced is turned on and I don't get one of my boxes replaced for the cutover. It's really not that big of an impact. What bothers me is that the user instructions and support script do not identify HOW the multiple boxes will be handled, leaving the impression that it will happen in one shipment. But it didn't happen that way.
Apologies for the issue and the experience that you described above. I have shared your experience directly with our team that is handing the HD Enhanced communication and fulfillment.
What happened when you attempted to tune to Channel 1995? I have been told that your area does support 4 digit channel numbers and this feature specifically.
Thanks for your feedback and your patience. I've asked a colleague to review your account and to follow up with you directly to be sure that you have all of the correct equipment that you need to continue to enjoy HD services from Comcast.

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Battery, heat, and ringer issues

I recently purchased the Iphone 4s.. this is my first iphone
I did the update that Apple sent out to help the battery and it seems like it worse then before the update?? My phone has been off the charger for 45 minutes, I sent 1 text message, and had 1 phone call. The percentage is now at 87. It the last 2 minutes i have watched it go down 2%? Is this normal? Also, the phone gets REALLY hot...
If not, what do I do now??
Also, I keep missing phone calls because I don't hear the phone ring... but the ringer is all the way up..
Any help will be greatly appreciated!!

mdorling wrote:
We've got the same issues, the BBM contacts went, now the BB won't charge ... we've tried all ways to get it to charge ... typically it's just over a month old so we can't get a full refund ... we are on here trying to find out what we need to do as we can't obtain a telephone number for BB customer services nor an email address only a tweet address which I haven't downloaded onto my handset. So am stuck!!! Any and all advice very gratefully received as seriously peeved with BB models now. My first BB was fantastic ... but all newer models have had problems ... think BB needs to ensure that all techy problems are fully ironed out prior to launching their new BB handset!
1. Connect your Z10 to the wall outlet charger for an hour and then with the Z10 powered on, and with it STILL CONNECTED, remove the battery for a minute and replace. This will normally reset the the on-device battery meter and allow the charging status and percentage to show more correctly.
2. Orange is your tech support contact and any issue which they cannot resolve, they should escalate up to BlackBerry tier two tech support, or you should ask/demand that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New Airport Extreme and iPhone Issues

I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....
Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

PO number and material issued against this PO for subcontracting

How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,

Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya.

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair

Libby,
Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
http://www.macmaps.com/backup.html
But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
I suggest starting a new thread here, where someone else could help you out better:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

Enhancer, schematool and Jboss issues

Similar Messages

Maybe you are looking for