Enhancing a BW Generic Extractor

I have built a generic extractor in the BW system and want to add some ZZ fields. Where can I write the exit to populate the ZZ field? I get the message "Program does not exist" when I go to for example: ZXRSAU01 or ZXRSAU02 in the BW system? Thanks

Hi Niten,
First you will have to create a new project in BW in CMOD transaction and
you have to assign the enhancment RSAP0001 to it in CMOD . I think you are
taking RSAP0001 as the project which is wrong . Please follow the below steps
1. Go to T-code CMOD in BW and enter a new project name say ZBW1. Click on the 'Attributes' radio button below and select the Create button . Enter a short text in the next window and save it.
2 Click on the radio button 'Enhancement Assignement' and press change button .
In the next window assign 'RSAP0001' as the enhancement .
3. Now activate the project and select the ' Components' Radio button . Press Change button and you will see the exits EXIT_SAPLRSAP_001 , 002 , 003 and 004. Click on 001 and you will get a new window . Click on include program ZXRSAU01 and press enter . Here you can start coding the user exit.
But please not that if the RSAP0001 enhancement is used in some other project then it can't be used again in other project.
Regards,
Prakash

Similar Messages

How to reduce long extraction time - Generic extractor based on view

Hello. The previous thread about this error was closed without any answer.
I'm in the same configuration.
"Using a generic extractor (Delta enabled on confirmation date) based on view to load data from ECC6 to BI.
Now my issue is that the delta extraction is running for a long time (around 1 hr) even if the data volume is very small
While checking the job overview in source system i saw that the job is hanging at the below step for almost 1 hr."
1 LUWs confirmed and 1 LUWs to be deleted with function module MF RSC2_QOUT_CONFIRM_DATA.
I am not understanding why this is happening.
Here is the log of the job:
30.05.2011 03:58:11 Job started
30.05.2011 03:58:11 Step 001 started (program SBIE0001, variant &0000000166864, user ID ALEREMOTE)
30.05.2011 03:58:11 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
30.05.2011 03:58:11 DATASOURCE = 0CO_OM_WBS_6
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 *          Current Values for Selected Profile Parameters               *
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 * abap/heap_area_nondia......... 4000000000                              *
30.05.2011 03:58:11 * abap/heap_area_total.......... 8000000000                              *
30.05.2011 03:58:11 * abap/heaplimit................ 100000000                               *
30.05.2011 03:58:11 * zcsa/installed_languages...... DEFS                                    *
30.05.2011 03:58:11 * zcsa/system_language.......... E                                       *
30.05.2011 03:58:11 * ztta/max_memreq_MB............ 2047                                    *
30.05.2011 03:58:11 * ztta/roll_area................ 6500000                                 *
30.05.2011 03:58:11 * ztta/roll_extension........... 2000000000                              *
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
30.05.2011 05:02:53 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 171 records
30.05.2011 05:02:53 Result of customer enhancement: 171 records
30.05.2011 05:02:53 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 171 records
30.05.2011 05:02:53 Result of customer enhancement: 171 records
30.05.2011 05:02:53 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 2, IDoc No. 4667050, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 03:58:11, End = 30.05.2011 03:58:11
30.05.2011 05:02:53 tRFC: Data Package = 1, TID = AC11082D38B44DE308DD028A, Duration = 00:00:00, ARFCSTATE = RECORDED
30.05.2011 05:02:53 tRFC: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Altogether, 0 records were filtered out through selection conditions
30.05.2011 05:02:53 Asynchronous transmission of info IDoc 3 in task 0003 (0 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 3, IDoc No. 4667051, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Synchronized transmission of info IDoc 4 (0 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 4, IDoc No. 4667052, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Job finished
Thanks for your help.
Yann

Parth Kulkarni,
following the note and the other thread, I've check the index 4 of the table COEP.
Here is what I got:
Index ID           COEP             - 4
Short text         MANDT/TIMESTMP/OBJNR, Index for Delta read method (CO-PA)
Last changed       SAP             04.01.2010
Status             Active          Saved
                   Does not exist in the database
DB index nme
    Not defined as DB index in the ABAP Dictionary
Is the fact that it doesn't exist in the database a problem ?
Is the fact that it is active is good enough ?
By the way thanks for your speedy reply !
Yann
Edited by: Yann GOFFIN on May 30, 2011 1:35 PM

Problems appending to a Generic Extractor

I have a Generic Extractor which is built on a customer defined table. I have tried to append a ZZ field to the Extract structure but the Append button is greyed out.
I therefore directly added the ZZ field into the structure and wrote the logic in the user exit to populate.
When I go to RSA6 the field is not visible. Why is this and how can I resolve? Thanks

Hi-
Is it possible to delete DS? If so....do that first!
goto RSO2 Create it again
RSA6/Select DS/Enhance Extraction Structure/Add fields/Activate
CMOD/Program/Include....
Then come back to RSA6, try it
I hope this can be out the issue!
Thanks,
Chandra.

Generic extractor and an append structure

Hi all,
this system is driving me crazy. So, that's something worked in former times..
I created an generic extractor on VEKP. I have not restricted to any selection criteria or hide any field. The system generated the extractor and everything is fine. THEN I created an append on the generic extractor and put different fields inside the append. I want (and this works) to fill this different field via user exit for extraction. All field in the append are having the prefix ZZ, all field are characteristic and there is no inconsistency in the append. I activated the append.
AND NOW - none of the fields of the append is available in RSA6 to hide or none hide or do anything. They are not available. By checking with SE11 on the generated structure - all field including the append are there.
We are on ECC 5.0 with PI 2004.1 for 5.0 SP 10.
Can anyone help. As i told you, this worked in former times (with SAP 4.6C with PI 2004.1 or lower).
Regards
OJ

Hi Siggi,
I have not created an special Append on the VEKP. I created an generic extractor on the VEKP. All fields of VEKP are available and I can hide or choose selection-field for all of these fields. No problem.
i created an append on the extract structure via RSA6 - enhancement. I know that after generating the generic extractor with RSO2 all settings done in former times in RSA6 are lost. But, my problem is: I can not see any of the fields I put into the append. They are not there. Not in ROOSFIELD and following not in RSA6. And that's the problem.
Thanks for your support.
OJ

0WBS element (external format) as append field in generic extractor?

Hi Guru's,
we use an generic extractor for our CO-PA data, as a join of different tables. Now I get the issue with this internal format of PSP element. It is of NUMC 8 and my basic data PSP element is CHAR 24. As they are not matching I want to add the POSID as an append field. But how to do this?
In table PRPS I found the Include PRPS_INC an thought about using this in my extract structure? Is this possible? How do I need to go on and to simply have my additional field - with content! - in my extract structure?
First I used an append and put in my include. As there are no fields extracted to BI I think this is wrong!? How can I delete my append?
Thanks

Hi Siggi,
I have not created an special Append on the VEKP. I created an generic extractor on the VEKP. All fields of VEKP are available and I can hide or choose selection-field for all of these fields. No problem.
i created an append on the extract structure via RSA6 - enhancement. I know that after generating the generic extractor with RSO2 all settings done in former times in RSA6 are lost. But, my problem is: I can not see any of the fields I put into the append. They are not there. Not in ROOSFIELD and following not in RSA6. And that's the problem.
Thanks for your support.
OJ

Generic Extractor: enriching GL Data with Purchasing Data

Experts,
This is my first time with Generic Extractor.
Requirement:
We have a requirement to enrich GL data with Purchasing data via the Material Document Number.
I need to provide this upto to the datawarehouse layer wherein another team will take over.
Solution idea:
Material Document is not part of the datasource 2LIS_02_SCL.
a. Should I enhance this datasource to include material number OR
b. Develop a concept to create a generic delat enabled extractor that pulls data from EKBE, GR and IR information.
In EKBE multiple material documents can exist per PO. The extractor returns 2 record per PO (before and after image) with the updated information.So if we have the first GR with Material document 901 and then a second GR with material doc 902 the extractor loads 3 records. New record, Before image and after image and the only one stored in BI is the after image. material doc would have value 902 if enhanced.
For the generic extractor approach the the ability to load deltas is crucial, since the EKBE table is very big. Maybe
"CPUDT-Day On Which Accounting Document Was Entered" and "CPUTM-Time of Entry" can be leveraged as delta hook.
Any ideas???
Thanks,
Jain

No one answered

Enhancing FI-AR Transaction extractor (0FI_AR_6)

Hi all,
I want to get the FI-AR transaction data business areawise receivables. Can i enhance the standard and add the field Business area or should i create a generic extractor.
present extractor data.
Custome   Cust_code Fisc_Per Debit Credit Balance
10000      COM1     002.2006 1000   500     500
But i want to get the data like this
Bus_area Cust   Cust_code Fisc_Per Debit Credit Balance
BA1      10000 COM1    002.2006   700   300     400
BA2      10000 COM1    002.2006   300   200     100
Want your valuable inputs... Please give me sample code if i have to create generic extractor for Transaction figures extractor.
Thanks in advance.
regards,
PKR

Thanks prakash and Nimesh for the reply.
Or can i enhance the 0FI_AR_4 (line item) and write all the queries on this cube itself.
Nimesh,
i have not worked on the generic extractor. Can u just forward any document of how to copy and customize the standard extractors to my id [email protected]
Thanks,
PKR

Creation of generic extractor in CRM

Hi Experts,
I want to create generic extractor in CRM.
In R/3 we can use table like VBAK,VBAP..etc while creating Generic extracor.But I am not able to find tables for transactions like Activities,Opportunities ...etc in CRM.
Pls let me know how to find tables in CRM.
Regards
Vishal.

Hi Vishal,
The orders tables in CRM are CRMD_ORDERADM_H (header) and CRMD_ORDERADM_I (item-level).
For other tables, usually they begin with CRMD_*. They're related to document informations, like for example: CRMD_PARTNER for partners, CRMD_ORGMAN for document organizational data, and so on....
Kind regards,

Delta fo Generic extractor using function module

Hi,
I am using the following function module for generic extractor but its always showing me extraction error.Could anyone please suggest to resolve the issue.
Thanks in advance fo rsuggestion.
FUNCTION Z_BW_SALESDATA_EXTRACT_CHNG2.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*" VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*" VALUE(I_PRIVATE_MODE) OPTIONAL
*" VALUE(I_CALLMODE) LIKE ROARCHD200-CALLMODE OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA OPTIONAL
*" E_T_SOURCE_STRUCTURE_NAME OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
The input parameter I_DATAPAKID is not supported yet !
Example: InfoSource containing TADIR objects
TABLES: VBFA,VBRK,tadir.
Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize.
user defined variables.
DATA : X_UPDMODE(1) Type c, " Update Type
 X_LastUpdate Like Sy-Datum. " Last Update Date
 X_LastUpdate TYPE RODELTAID. " Last Update Date "TCS_KAP
Select ranges
RANGES: L_R_VBELN FOR VBAK-VBELN,
 L_R_AUDAT FOR VBAK-AUDAT.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
 buffer input parameters
 prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
 IF NOT g_flag_interface_initialized IS INITIAL.
 IF 1 = 2. MESSAGE e008(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '008' "message number
 ' ' "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDIF.
Check InfoSource validity
 CASE i_isource.
 WHEN 'Z_BW_SDDATA_CREATEON'.
 WHEN 'Y'.
 WHEN 'Z'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE e009(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '009' "message number
 i_isource "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDCASE.
Check for supported update mode
 CASE i_updmode.
 WHEN 'F'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE e011(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '011' "message number
 i_updmode "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDCASE.
Check for obligatory selection criteria
 READ TABLE i_t_select INTO l_s_select WITH KEY fieldnm = 'VBELN'.
 IF sy-subrc <> 0.
 IF 1 = 2. MESSAGE e010(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '010' "message number
 'PGMID' "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDIF.
 APPEND LINES OF i_t_select TO g_t_select.
Fill parameter buffer for data extraction calls
 g_s_interface-requnr = i_requnr.
 g_s_interface-isource = i_isource.
 g_s_interface-maxsize = i_maxsize.
 g_s_interface-initflag = i_initflag.
 g_s_interface-updmode = i_updmode.
 g_s_interface-datapakid = i_datapakid.
 g_flag_interface_initialized = sbiwa_c_flag_on.
Store Update mode in static variable...
 X_UPDMODE = I_UPDMODE.
 Select Single DELTAID
 Into X_LastUpdate
 From ROOSGENDLM
 Where OLTPSOURCE = 'Z_BW_SDDATA_CREATEON'.
 If X_LastUpdate Is Initial.
 X_LastUpdate = '19800101'. " The oldest..., this should not happen
 Endif.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
 APPEND LINES OF i_t_fields TO g_t_segfields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
 Following Calls FETCH only
X_UPDMODE = I_UPDMODE.
First data package -> OPEN CURSOR
 IF g_counter_datapakid = 0.
Fill range tables for fixed InfoSources. In the case of generated
InfoSources, the usage of a dynamical SELECT statement might be
more reasonable. BIW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
 LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'VBELN'.
 MOVE-CORRESPONDING l_s_select TO L_R_VBELN.
 APPEND L_R_VBELN.
 ENDLOOP.
 LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'AUDAT'.
 MOVE-CORRESPONDING l_s_select TO L_R_AUDAT.
 APPEND L_R_AUDAT.
 ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between InfoSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
*added by Yogesh
 DELETE FROM ZBWSALEDATA.
*ended by Yogesh
 l_maxsize = g_s_interface-maxsize.
Check for supported update mode
 CASE X_UPDMODE.
 WHEN 'F' Or 'I'. " Full or Init
**get sales orders
 SELECT *
 INTO CORRESPONDING FIELDS OF TABLE I_SALESDATA
 FROM VBAK AS K
 INNER JOIN VBAP AS P
 ON PVBELN = KVBELN
 WHERE K~VBELN IN L_R_VBELN
 AND K~AUDAT IN L_R_AUDAT
 AND K~VBTYP = 'C'.
 IF I_SALESDATA[] IS NOT INITIAL.
 PERFORM F_GET_DATA. "get data
 PERFORM F_DEL_VATCOND. "delete vat conditions
 PERFORM F_GET_TAR_COSTUNIT. "get tariff cost unit
 PERFORM F_GET_NETVAL TABLES IT_VBDPA1. "get net val of the item
 PERFORM F_GET_SALESDATA.
*write perform with name F_INSERT_DB_ZBWSALEDATA.
 PERFORM F_INSERT_DB_ZBWSALEDATA. "insert into table ZBWSALESDATA
 LOOP AT I_SALESDATA WHERE NETPR = 0.
 MOVE-CORRESPONDING I_SALESDATA TO I_SALESDATA_FIN.
 APPEND I_SALESDATA_FIN.
 ENDLOOP.
 SORT I_SALESDATA_FIN BY VBELN POSNR KSCHL.
 DELETE ADJACENT DUPLICATES FROM I_SALESDATA_FIN
 COMPARING VBELN POSNR
 KSCHL.
 INSERT ZBWSALEDATA FROM TABLE I_SALESDATA_FIN.
 ENDIF.
 WHEN 'D'. " Delta
 SELECT *
 INTO CORRESPONDING FIELDS OF TABLE I_SALESDATA
 FROM VBAK AS K
 INNER JOIN VBAP AS P
 ON PVBELN = KVBELN
 WHERE K~ERDAT >= X_LastUpdate
 WHERE K~ERDAT >= X_LastUpdate+0(8) "TCS_KAP
 AND K~VBTYP = 'C'.
 IF I_SALESDATA[] IS NOT INITIAL.
 PERFORM F_GET_DATA. "get data
 PERFORM F_DEL_VATCOND. "delete vat conditions
 PERFORM F_GET_TAR_COSTUNIT. "get tariff cost unit
 PERFORM F_GET_NETVAL TABLES IT_VBDPA1. "get net val of the item
 PERFORM F_GET_SALESDATA.
*write perform with name F_INSERT_DB_ZBWSALEDATA.
 PERFORM F_INSERT_DB_ZBWSALEDATA. "insert into table ZBWSALESDATA
 LOOP AT I_SALESDATA WHERE NETPR = 0.
 MOVE-CORRESPONDING I_SALESDATA TO I_SALESDATA_FIN.
 APPEND I_SALESDATA_FIN.
 ENDLOOP.
 SORT I_SALESDATA_FIN BY VBELN POSNR KSCHL.
 DELETE ADJACENT DUPLICATES FROM I_SALESDATA_FIN
 COMPARING VBELN POSNR
 KSCHL.
 INSERT ZBWSALEDATA FROM TABLE I_SALESDATA_FIN.
 ENDIF.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE E011(R3). ENDIF.
 LOG_WRITE 'E' "message type
 'R3' "message class
 '011' "message number
 I_UPDMODE "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDCASE.
**end get sales orders
 OPEN CURSOR WITH HOLD g_cursor FOR
 SELECT (g_t_fields) FROM ZBWSALEDATA.
 WHERE pgmid IN l_r_pgmid AND
 object IN l_r_object.
 ENDIF. "First data package ?
Fetch records into interface table. There are two different options:
- fixed interface table structure for fixed InfoSources have to be
named E_T_'Name of assigned source structure in table ROIS'.
- for generating applications like LIS and CO-PA, the generic table
E_T_DATA has to be used.
Only one of these interface types should be implemented in one API !
 FETCH NEXT CURSOR g_cursor
 APPENDING CORRESPONDING FIELDS
 OF TABLE E_T_DATA
 PACKAGE SIZE l_maxsize.
 IF sy-subrc <> 0.
 CLOSE CURSOR g_cursor.
 RAISE no_more_data.
 ENDIF.
 g_counter_datapakid = g_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
Best regards,
Yogesh

Dear Yogesh,
Try to debug the code by putting a break point at select statement...is the FM Syntactically correct ??
Check the Select statements..if all fields are not required avoid using Select * , and use always for all entries rather than JOINS..
Note : For Joins you have to specify the Fields in the Select...Dont use Select * ....
Hope it helps..
Thanks,
Krish

Problem in creating a Generic Extractor on a custom 'Z' table

This is regarding an earlier question I posted in sdn today. I am trying to create a generic extractor on a custom 'Z' table and iam getting the following message.
Invalid extract structure template YBW_Z3PVR of DataSource YCNA_3PVAR_RPT
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure Z3PVR. This operation failed, because the template structure quantity fields or currency fields, for example, field MENGE refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
Please advise. how do i solve this?

Hi there,
Is your Z* table working? It must be add check field for quantity field and currency field.
Hope this helps.

Error while creating Generic Extractor via Function Module

Hello Guys
I have created a Generic Extractor through a Function Module. I took the Standard FM: RSAX_BIW_GET_DATA_SIMPLE, gave it a new name and activated it. I made a few changes in it, like giving my structure name for E_T_DATA and giving the list of tables, from where I need to get the data. Then I created the datasource in RSO2 by giving this function module and the extract structure.
The DS was created properly, but when I check in RSA3 for records, its giving me an error: ---> The extraction program does not support object YCNA_INVY_TRNS
What do i do now? Can someone please tell me, what changes I need to make in the standard FM to suit my requirements??
Thanks.

Hi,
Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
Regards
Sunil

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

How to identify update mode in function module for generic extractor

Hi All,
I have created generic extractor using function module which supports delta load.
Delta logic is handeled in coding...by using ROOSGENDLM table.
Now problem is we need to identify the update mode, requested from infopackage in our function module in order to apply logic for Repair full.
I would like to know table or parameter in source system, which contain the update mode (Init , Delta , Full).
Thanks,
Niraj

Hi Niraj
You can use the FM import parameter "i_updmode" (This is of type "SBIWA_S_INTERFACE-UPDMODE") to determine if infopackage triggerred in full or delta mode.
I_REQUNR     TYPE     SBIWA_S_INTERFACE-REQUNR
I_ISOURCE     TYPE     SBIWA_S_INTERFACE-ISOURCE                               InfoSource Name
I_MAXSIZE     TYPE     SBIWA_S_INTERFACE-MAXSIZE                               Data Packet size
I_INITFLAG     TYPE     SBIWA_S_INTERFACE-INITFLAG                               Initial Flag
I_UPDMODE     TYPE     SBIWA_S_INTERFACE-UPDMODE                               Update Mode
I_DATAPAKID     TYPE     SBIWA_S_INTERFACE-DATAPAKID                               Datapacket Id
I_PRIVATE_MODE
I_CALLMODE     TYPE     ROARCHD200-CALLMODE                               Single-Character Flag
I_REMOTE_CALL     TYPE     SBIWA_FLAG
Cheers
Vasu Sattenapalli

Create generic extractor based on 2 tables

hey BI gurus,
I have to create a generic extractor based on these 3 tables:
eban - i need all fields
vttk - i need only 4 fields i.e
                                     route,
                                     tknum,
                                     datbg,
                                     daten
ekbe - budat.
now the problem is thr is no common field between vttk & eban AND vttk & ekbe. but thr is a common field between eban & ekbe.so i can create a view only on these 2 tables but i want 3 tables
how do i proceed???

Hi,
Sometimes, if your application or requirement makes it necessary, you have to create your own function module to extract the data from whatever sap system to bw.
Therefore you normally make a copy of the standard fm 'RSAX_BIW_GET_DATA_SIMPLE'. To make this new function work for you, you have to realize the following.
1.) the fm gets called by the extraction api for at least 2 times. First time is for initialization and from the 2nd time on it is for data extraction.
2.) right after the last data package (somehow you need to make sure that it is the last one) you have to raise the exception no_more_data.
Refer this links for more Info
SAP BI Generic Extraction Using a Function Module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
SAP Network Blog: Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Take the help of an ABAPer if your are new to this process
Regards
Karthik
Assigning points is the way to say thanks

How to use 2 date field as delta control in generic extractor.

Hi colleagues:
I have developed a generic extractor to extract logistic data: Purchase Orders and Invoice. In order to do that, I have defined a view joining EKBE, EKKO, EKPO, EKET tables on R/3. By this approach, the delta mechanism is supposed to be controlled by the EKBE-BUDAT field and also by the EKPO-AEDAT field. Both fields are available on the view used to create the Datasource. However, the Datasource creation allows us to define just one field as delta control.
I have a few questions regarding to this scenario:
1 - Is it possible to define 2 fields as delta control field on Generic Datasource?
2 - How about creating two similar Datasouces, one having AEDAT as delta control, the other having BUDAT as delta control, and then connect those Datasources to an unique Infosource on the bw side?
Best regards
Waldemar

hi,
1 - as far as I know it is not possible to define 2 fields
2 - this workaround is used often in cases like yours.
Just remember about order of extracting: first you extract new documents then changed
Regards,
Andrzej

Enhancing a BW Generic Extractor

Similar Messages

Maybe you are looking for