Enhancing a rough recording

I have recordings of a couple songs a friend of mine performed live and was hoping there was a way to enhance the recordings using Garage Band or another software program. At the time I recorded the songs, I only had a tape recorder and was not able to sit very close to her as she was performing. So, the piano and vocals are both pretty soft and it's probably only because I know the words that I can decipher what my friend is singing. I tried setting the volume to max and the Equalizer to Vocal Boost in iTunes and that does help some. Any other ideas? Thanks!

There are specific frequencies that can be boosted or cut with an EQ in GB that may make the vocals or piano stick out, although if they are in the same range (similar frequencies) there's probably nothing that can be done, besides re-recording the performance with individual tracks for each instrument.

Similar Messages

Enhance legend in Record Working Time IView

Hi,
I am working on SAP NetWeaver Portal 7.0(Service Pack 4). New NetWeaver functionality in Record Working Time section(of ESS>Working time ) allows employees to enter their working times for different attendance/absence types showing different colours in calendar for Rejected and Not Released statuses. Now the requirement is to include one more colour to show the approved times in the calendar. Ie, Currently legend has two colors with text, like ( <Red box> Rejected <Light Red box> Not Released), now i have to add ' <Green box> Approve ' beside 'Not Released' text, and if manager approves the time sheet then those dates will be displayed in green color.
If any body worked on the similar type of requirement or having knowledge....please let me know how to achieve this req.
Thanks in advance.

HI,
You need to implement BADI for this ..
BADI name : "PT_ABS_REQ"
In the BADI "PT_ABS_REQ" interface "IF_EX_PT_ABS_REQ" you can find the method
"SET_CALENDAR_COLOR" in that you can set the colure for the Absent type ......
Adjust Colors of Calendar and Team Calendar
Functionality
You can use this method to change the colors in the team calendar.
In the standard system, the different statuses for requests have different colors. You can use this method to differentiate the colors of requests depending on the following aspects:
Status of requests (status)
Action that an employee has executed: new request, delete, change (UIA operation)
Subtype of absence (SUBTY)
Full-day or partial-day absence (BEGMT, where BEGMT = 0 signifies a full-day absence)
Application mode ( mode). You specify the application mode in the Select Employees for the Team Calendar IMG activity.
Color Display of Status of Leave Requests(COLORS_ACTIVE). You specify this status in the Specify How Leave Is Displayed and Default Values IMG activity.
Available Colors
You have a choice of 16 colors. The 16 colors are hard coded, that is, you cannot change them or add other ones.
The available colors are stored with their RGB value as constants of the CL_PT_REQ_CONST class. Use these constants if you want to change the colors.
Notes
If you change the colors in the team calendar, you should also adapt the legend accordingly. You can use the Adjust Legend for Calendar and Team Calendar method to do so.
Hope this work!!!

Enhanced session connection to a VM-no audio recording

I have a set of VMs that I'd like to connect to with enhanced session and audio redirection, but for some reason audio recording has stopped working through the enhanced session connection. The host is windows 8.1, and the guest is server 2012 R2,
and I have the correct policies enabled on both host and guest. I can connect the enhanced session with the "record from this computer" selected for audio capture, but on the guest I only have playback, not capture.
What's really strange is that if I connect a second virtual NIC to this VM with a public IP address, I can RDP directly into this machine (through a regular RDP session, not the hyperV enhanced session), and recording redirection works just fine. So
far I've tried:
rebooting host and guest
disabling and re-enabling audio redirection
removing the "remote audio" device in the guest's device manager
I've also tried USB redirection using a USB audio device, and this works through enhanced session, but I'd also like to be able to get an audio connection using just the default audio device. Anyone have any ideas?

Hi Chris,
According to your description , first please ensure that the recording device is redirected to hyper-v host .
If not , please check the hyper-v host setting .
I also read the following blog :
http://blogs.msdn.com/b/rds/archive/2009/05/11/what-s-new-in-remote-audio-for-windows-7.aspx
"Please keep in mind that audio capture must be enabled in the Remote Desktop Session Host Configuration on the server before it can be used."
Based on my understanding , you may also need to enable RDSH on hyper-v host then configure desktop experience feature to enable recording .
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Infopackage loads 0 record in process chain as BG job not running correctly

Hi Experts,
I have scheduled a daily process chain for Purchasing.
The infopackage in the process chain loads 0 records from R/3 and shows green status but data is available in R/3. Its a FULL update.
But when I load the data manually the infopackage fetchs the record form R/3.
When I checked the background job in R/3 that loaded 0 records, the job gets finished abruptly without fetchig any data.
Please find the job log below:
Job started
Step 001 started (program SBIE0001, variant &0000000210024, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 0                                       *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000320                                 *
ztta/roll_extension........... 2000683008                              *
Job finished
But the background job for the request when I run the infopackage manually calls a function BW_BTE_CALL_BW204010_E (BTE) and fetches the record from R/3.
Please find the job log that fetches the record when run manually.
Job started
Step 001 started (program SBIE0001, variant &0000000210036, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 41230008320                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000002 in task 0004 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,062 records
Result of customer enhancement: 1,062 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,062 records
Result of customer enhancement: 1,062 records
Asynchronous send of data package 000003 in task 0006 (1 parallel tasks)
tRFC: Data Package = 000001, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054648, End = 20110217 054649
tRFC: Data Package = 000003, TID = , Duration = 000000, ARFCSTATE =
tRFC: Start = 20110217 054652, End = 20110217 054652
tRFC: Data Package = 000002, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054651, End = 20110217 054652
Job finished
Kindly help me on this issue as why the job run through process chain is not fetchibg any records.
Regards,
Indhuja

Hi Prasanth,
If the background jobs are not availbale when IP is triggered then the BG job will ot be executed and the IDOCs will get struck.
Once we push the IDOc only the BG job will be executed until then the PC will wait with yellow status.
Hence this is not the issue with the non availability of BG WP.
Also for last one week this issue was happening but today the job executed successfully through the Process chain itself.
Then it shows this is not the issue with PC also.
The job is executed using RFCUSR.
Please suggest what would be the possible cause for this issue.
Regards,
Indhuja
Edited by: Induja Rajkamal on Feb 23, 2011 11:48 AM

Enhance infotype 0077 screen number 2008

Hi,
I want to enhance infotype 0077 screen number 2008.
Using PM01, i created enhance single screen record with infotype 0077 with version 08.
But the additional field appear on screen number 2000 instead of screen number 2008.
How to add the additional field to 2008 instead?
Thanks.
Best regards,
Xiang Li Heah

Hi Volker Binder,
Try "Infotype Screen Control" in T588M.
T588M is a table and there is no column name called "Infotype Screen Control", can you provide further infomation on this?
Hi Sheetal,
My requirement is to add sexual orientation field into IT 77.
The added field need to be display/edit on PA30 (screen number 2008).
Using PM01, i created single screen enhancement on IT 77 with version 08 (GB).
Using PA30, by selecting different employee, the additional fields display on screen number 2000 but it is not display on screen number 2000.
Many thanks.
Best regards,
Xiang Li Heah

HT204380 Can you record a FaceTime call on the iPhone?

I know you can record your screen and what you're doing on the MacBook or any apple computer. But I was wondering if you could do that on an iPhone during an FaceTime call?

in this support forum, look for a link to apple feedback and put in a enhancement request to record facetime. Hopefully, if apple gets a lot of request they will add this enhancement.

CRA 3.0 Enhanced or Premium?

Customer has CRA 3.0. License Update Utility shows Enhanced licensing, but at the same time they have several working scripts that do SQL dips, which should have been allowed only with Premium licensing. Does anyone have any insight into this ? Is it possible that CRA 3.0 wasn't doing strict licensing check and allowed for this. Does this mean that upgrading to UCCX 8 will present an issue with SQL dips if they don't upgrade to Premium licensing? Is it possible that License Update Utility is not accurately displaying licensing?

Thanks Jonathan, I actually found the original 2002 quote for this project, and it appears that they only had enhanced licenses, see below. Local Cisco SE believes that 3.0 didn't have strict checking of what you could and could not do in the Script Editor. This means they'll need to upgrade to premium licensing if they want to upgrade to 8.
IPCC   Express/Enhanced 3.0 - 20 Agents
MCS-7835H-2.4-CC1
MCS 7835H-2400 Server   With P4 2.4, 1GB SDRAM, 2-36.4GB SCSI
1
CAB-AC
Power Cord,110V
1
ICD-3.0-EHN-BS=
Bundle -10 Agents, 1   Super, 10 IVR, 1 Hist, 1 Recording
1
ICD-3.X-E-AGT1
1 Cisco Enhanced   Agent Desktops ICD 3.X
10
ICD-3.X-E-SUP1
1 Cisco Enhanced   Supervisor Desktop ICD 3.X
1
ICD-3.X-E-HIST1
1 Cisco Enhanced   Historical Reporting ICD 3.X
1
ICD-3.X-E-IVROPT1
10 Cisco Enhanced IVR   Port Option ICD 3.X
10
ICD-3.X-E-REC1
1 Cisco Enhanced On   Demand Recording Option ICD 3.X
1
ICD-3.X-C-PAGT1
1 Cisco Enhanced   Phone Agent Option ICD 3.X
1
CON-SAU-ICD3XEA1
IPCC Express Enhanced   Agent Service - additional agents
10
CON-SAU-ICD3XEBS
IPCC Express Enhanced   Bundle Service
1
CON-SNT-MCS-7835
8x5xNBD Svc, MCS   7835H-2400 ServerWith P4 2.4, 1GB
1

BWREMOTE background job canceled in sap r/3 system

Hi my friends,
Thanks for your help ahead.
Today I checked the background job in SAP R/3 created by BWREMOTE via SM37. It showed me some jobs had been canceled.
I displayed its log, the detail message is:
==========================================
Step 001 started (program SBIE0001, variant &0000000083494, user name BWREMOTE)
DATASOURCE = ZQM_NOT_SHFGRP
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,593 records
Result of customer enhancement: 1,593 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,593 records
ABAP/4 processor: SAPSQL_INVALID_FIELDNAME
Job cancelled
==========================================
Then I displayed the "Long Text" of the job log. It is
One of the field names in the SELECT clause was not recognized.
Error analysis
The SELECT clause was specified in an internal table at runtime.
It contains the field name "TPR00", but this does not occur in any of
the database tables listed in the FROM clause.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLXRSA " in
"EXIT_SAPLRSAP_001".
The main program was "SBIE0001 ".
Source code extract
008840 concatenate 'TPR'
008850 day_temp+6(2)
008860 ' = '
008870 ' ''' zshift '''' into
008880 cond .
008890 append cond to itab .
008900 select schkz into i_not_shfgrp-zzschkz from t552a
008910 where zeity = '2'
008920 and mofid = 'CN'
008930 and mosid = '28'
008940 and ( schkz = 'SFTA' or
008950 schkz = 'SFTB' or
008960 schkz = 'SFTC' or
008970 schkz = 'SFTD' )
008980 and kjahr = day_temp+0(4)
008990 and monat = day_temp+4(2)
> and (itab) .
009010 endselect.
I guess that there is not a field named TPR00 in table t552a.
Next, I opened the 'project management of sap enhancement' via CMOD, entering the project name and chosing 'Display'.
Then Double click the Components 'EXIT_SAPLRSAP_001', we can see the function module 'EXIT_SAPLRSAP_001'. In the source codes, there is an include program, it is 'INCLUDE ZXRSAU01.'.
Then, I double clicked the Include program and find the position program terminated. The source codes are:
ZQM_NOT_SHFGRP *
when 'ZQM_NOT_SHFGRP'.
loop at c_t_data into i_not_shfgrp .
l_tabix = sy-tabix .
clear :mbatch ,zshift,cond ,zfield, zcharg, day_temp .
refresh itab.
if i_not_shfgrp-ausvn is initial.
else.
aa = '080000'.
bb = '160000'.
cc = '235959'.
day_temp = i_not_shfgrp-ausvn.
if i_not_shfgrp-auztv ge aa and
i_not_shfgrp-auztv lt bb .
zshift = 'MSHF' .
elseif i_not_shfgrp-auztv ge bb and
i_not_shfgrp-auztv le cc .
zshift = 'LSHF'.
else .
zshift = 'NSHF'.
day_temp = i_not_shfgrp-ausvn - 1.
endif.
concatenate 'TPR'
day_temp+6(2)
' = '
' ''' zshift '''' into
cond .
append cond to itab .
select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) .
endselect.
endif.
I found that we got a TPR00 during concatenation. In other words, day_temp+6(2) = 00. But I think it is impossible. I can not explain this.
Any ideas, my friends. Many thanks.

select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) . => doesn't make sense?!
endselect.
endif.
it seems something got deleted between 'and' and '(itab)'... so, you'll have to recheck the requirements for your select to fill the 'and' statement further.
so, it should look like
and monat = day_temp+4(2)
and <some kind of condition that needs to be fulfilled>.
endselect.
<some logic to fill a line in your internal table>.
append cond to itab.
endif.
obviously <some kind of condition that needs to be fulfilled> needs to be replaced by a real condition
and <some logic to fill a line in your internal table> needs to be replaced by some kind of formula
I assume something like (otherwise it would be really weird to select that field):
cond = i_not_shfgrp-zzschkz.
or a formula using the i_not_shfgrp-zzschkz field.
It would also be a lot better to replace your select ... endselect by a select single as you'll be selecting 1 record only anyways.
Message was edited by:
RafB

Data extraction is taking long time

Hi,
I am extracting data into infocube from datamart. it's fullupload and almost extracting 24lack records. generally it should take less than time but taking more than 6 hours to upload. data selection and scheduling is happening correctely but acknowledgement from source infocube is taking more time(may be data mart)
BW statistics are not activated to this infocube.
here is job log to this data load.
01:32:26 'SAPGGB', TABNAME => '"/BI0/0P00000050"',
01:32:26 ESTIMATE_PERCENT => 10 , METHOD_OPT => 'FOR ALL
01:32:26 COLUMNS SIZE 75', DEGREE => 1 , GRANULARITY =>
01:32:26 'ALL', CASCADE => TRUE ); END;
01:32:27 SQL-END: 2009.09.02 01:32:27 00:00:01
06:35:44 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,101 records
06:35:44 Result of customer enhancement: 10,101 records
06:35:44 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
06:35:44 tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
06:35:44 tRFC: Start = 2009.09.02 01:30:14, End = 2009.09.02 01:30:14
06:35:45 Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks
06:35:46 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,101 records
06:35:46 Result of customer enhancement: 10,101 records
06:35:46 tRFC: Data Package = 0, TID = , Duration = 00:00:01, ARFCSTATE =
06:35:46 tRFC: Start = 2009.09.02 06:35:45, End = 2009.09.02 06:35:46
06:35:46 Asynchronous send of data package 2 in task 0004 (1 parallel tasks)
06:36:55 tRFC: Data Package = 1, TID = 0A1401543C764A9E124057C6, Duration = 00:0
06:36:55 tRFC: Start = 2009.09.02 06:35:45, End = 2009.09.02 06:36:55
06:36:55 Asynchronous transmission of info IDoc 4 in task 0005 (1 parallel tasks
06:36:56 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,101 records
06:36:56 Result of customer enhancement: 10,101 records
please advice me where can i check and possible reasons to take long time.
Thanks,
Kasi

Hello Kasi,
I am facing the similar issue of long running data load but in my case data source is 2LIS_13_VDITM.
Back ground job in ERP system is long running and is taking time in the below step.
00:56:56 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 91.869 records
00:56:56 Result of customer enhancement: 104.153 records
00:56:56 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 91.869 records
02:13:59 Result of customer enhancement: 104.153 records
02:14:02 PSA=0 USING & STARTING SAPI SCHEDULER
02:14:02 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
02:14:05 IDOC: Info IDoc 2, IDoc No. 348602556, Duration 00:00:00
02:14:05 IDoc: Start = 16.02.2010 00:56:34, End = 16.02.2010 00:56:34
02:14:06 Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
Please note that this long running issue is not occuring daily and there were no recent changes with enhancement EXIT_SAPLRSAP_001 in CMOD.
Kindly let me know how to overcome with this issue.
Thanks in advance...

0CRM_SALES_ACT_1 Cancelled in Source System

Hi, I'm having problems with a BI7 dataload, from our CRM source system, based upon the 0CRM_SALES_ACT_1 datasource. I've cleared down the data in my related InfoProviders, deleted all PSA requests and previous Delta Inits, and I'm now trying to load a new Init with Data Transfer. The job progresses so far (229,398 records) and then gets cancelled in the source system with the error message: "User is not integrated into organizational structure"
I've done some searching on SDN and can't find anyone posts with the same issue - my apologies if I've mised the key one.
I've reactivated the transfer structures using the activate all program in se38, and carried out an RSRV on the InfoProviders.
It was working when I last reloaded the data a few weeks ago, so something has changed either on the source system or the BI7 system since then, but I can't figure out why it's suddenly getting cancelled at source. It's also taking over 16 hours to get to this stage, whereas the last successful Init ran in four hours.
I've included the last part of the job log from the source system, showing the last successful data package and then the final system error message.
Any advice or help on this would be greatly appreciated.
01.07.2010 10:02:20 Asynchronous send of data package 38 in task 0042 (1 parallel tasks)
01.07.2010 10:02:20 tRFC: Data Package = 37, TID = AC10026B18944C2C4F29EB3A, Duration = 00:00:02, ARFCSTATE =
01.07.2010 10:02:20 tRFC: Start = 01.07.2010 09:17:44, End = 01.07.2010 09:17:46
01.07.2010 10:51:54 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 5,882 records
01.07.2010 10:51:54 Result of customer enhancement: 5,882 records
01.07.2010 10:51:54 Asynchronous send of data package 39 in task 0043 (1 parallel tasks)
01.07.2010 10:51:54 tRFC: Data Package = 38, TID = AC10026B1A7C4C2C599D01C0, Duration = 00:00:02, ARFCSTATE =
01.07.2010 10:51:54 tRFC: Start = 01.07.2010 10:02:20, End = 01.07.2010 10:02:22
01.07.2010 11:09:00 User is not integrated into organizational structure
01.07.2010 11:09:00 Job cancelled after system exception ERROR_MESSAGE
Kind regards,
Jeff.

Hi, there's no short dump.
Kind regards,
Jeff.

Infopackage in process chain taking long time to run

HI Experts,
One of the element (Infopackage) in process chain(Daily process chain) is taking much longer time(6 hr and still runing) as generally it takes 15-20 mins to complete and the status is in yellow and still running in process monitor without giving any clear picture of error. Manually we are making the staus red and we are updating from PSA and this time it is getting completed in time as specified.
Flow from PSA to datatarget(DSO) in series
For last one week we are facing same issue and i would like to mention that we don't have access to SM37,SM12 to look the logs
and any locks.
without this i need to investigate what is the root cause for the same.
with regards,
murali

Hi,
please find the job log.
Date
Time
Message
MsgID/No./Ty
13.12.2010
21:45:30
Job started
00
516
S
13.12.2010
21:45:30
Step 001 started (program SBIE0001, variant &0000000109368, user ID RFCUSER)
00
550
S
13.12.2010
21:45:30
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
R3
413
S
13.12.2010
21:45:30
DATASOURCE = 2LIS_17_I3HDR
R3
299
S
13.12.2010
21:45:30
RLOGSYS    = PBACLNT200
R3
299
S
13.12.2010
21:45:30
REQUNR     = REQU_D9GSSV08BTS93Z6Y7XWP1ZEUJ
R3
299
S
13.12.2010
21:45:30
UPDMODE    = D
R3
299
S
13.12.2010
21:45:30
LANGUAGES = *
R3
299
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
         Current Values for Selected Profile Parameters               *
R8
049
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
abap/heap_area_nondia......... 0                                       *
R8
050
S
13.12.2010
21:45:30
abap/heap_area_total.......... 25500319744                             *
R8
050
S
13.12.2010
21:45:30
abap/heaplimit................ 40000000                                *
R8
050
S
13.12.2010
21:45:30
zcsa/installed_languages...... ED                                      *
R8
050
S
13.12.2010
21:45:30
zcsa/system_language.......... E                                       *
R8
050
S
13.12.2010
21:45:30
ztta/max_memreq_MB............ 2047                                    *
R8
050
S
13.12.2010
21:45:30
ztta/roll_area................ 3000320                                 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_extension........... 2000000000                              *
R8
050
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:31
70 LUWs confirmed and 70 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
RSQU
036
S
13.12.2010
21:45:33
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
PSA=0 USING & STARTING SAPI SCHEDULER
R3
299
S
13.12.2010
21:45:33
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
R3
409
S
13.12.2010
21:45:34
IDOC: Info IDoc 2, IDoc No. 5136702, Duration 00:00:00
R3
088
S
13.12.2010
21:45:34
IDoc: Start = 13.12.2010 21:45:30, End = 13.12.2010 21:45:30
R3
089
S
13.12.2010
21:45:35
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
R3
413
S
13.12.2010
21:45:35
Altogether, 0 records were filtered out through selection conditions
RSQU
037
S
13.12.2010
21:45:35
IDOC: Info IDoc 3, IDoc No. 5136703, Duration 00:00:00
R3
088
S
13.12.2010
21:45:35
IDoc: Start = 13.12.2010 21:45:35, End = 13.12.2010 21:45:35
R3
089
S
13.12.2010
21:55:37
tRFC: Data Package = 1, TID = 0AF0842B00C84D0694000F00, Duration = 00:10:03, ARFCSTATE = SYSFAIL
R3
038
S
13.12.2010
21:55:37
tRFC: Start = 13.12.2010 21:45:34, End = 13.12.2010 21:55:37
R3
039
S
13.12.2010
21:55:37
Synchronized transmission of info IDoc 4 (0 parallel tasks)
R3
414
S
13.12.2010
21:55:37
IDOC: Info IDoc 4, IDoc No. 5136717, Duration 00:00:00
R3
088
S
13.12.2010
21:55:37
IDoc: Start = 13.12.2010 21:55:37, End = 13.12.2010 21:55:37
R3
089
S
13.12.2010
21:55:37
Job finished
00
517
S

2LIS__04_P_COMP load failure

Hi,
I am facing a problem while loading data from R/3 to BW using the datasource 2LIS__04_P_COMP.
The data is extracted successfully but takes a lot of time in the update rules around 10 hrs.Ulitmately the load fails and i have to manually update it after which the load becomes successful.
When i check the job status in the R/3 side it shows me ARFSTATE =SYSFAIL error.
There are two source systems from which i load data .. one is A6P and other is ANP..the load from ANP is always successful and the one from A6P always fails with SYSFAIL error.The update rules for both the system is the same.
Please can someone assist me with this problem.

I will try debugging again.. but i have a query .When i check the particular request in the R/3 side when the load happens for the first time and it fails that is before it is manually updated, the job log in the R/3 side mentions ARFCSTATE = SYSFAIL in what cases does this kind of error occur .Job log details in R/3
17:17:13 Job started
17:17:13 Step 001 started (program SBIE0001, variant &0000000036256, user name ADMDTLOAD)
17:17:13 DATASOURCE = 2LIS_04_P_COMP
17:17:13 *************************************************************************
17:17:13 *           Current values of selected profile parameter                *
17:17:13 *************************************************************************
17:17:13 * abap/heap_area_nondia......... 4000000000                              *
17:17:13 * abap/heap_area_total.......... 4000000000                              *
17:17:13 * abap/heaplimit................ 62914560                                *
17:17:13 * zcsa/installed_languages...... 1MEFDST                                 *
17:17:13 * zcsa/system_language.......... E                                       *
17:17:13 * ztta/max_memreq_MB............ 64                                      *
17:17:13 * ztta/roll_area................ 6500352                                 *
17:17:13 * ztta/roll_extension........... 150994944                               *
17:17:13 *************************************************************************
17:18:03 37 LUWs confirmed and 37 LUWs to delete with FM RSC2_QOUT_CONFIRM_DATA
17:18:21 Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 52.524 records
17:18:21 Result of customer enhancement: 52.524 records
17:18:21 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 52.524 records
17:18:21 Result of customer enhancement: 52.524 records
17:18:21 Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
17:18:26 Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 51.032 records
17:18:26 Result of customer enhancement: 51.032 records
17:18:26 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 51.032 records
17:18:26 Result of customer enhancement: 51.032 records
17:18:27 Asynchronous send of data package 000002 in task 0003 (1 parallel tasks)
17:18:30 Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 14.966 records
17:18:30 Result of customer enhancement: 14.966 records
17:18:30 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 14.966 records
17:18:30 Result of customer enhancement: 14.966 records
17:18:30 Asynchronous send of data package 000003 in task 0004 (2 parallel tasks)
17:18:32 Selection conditions filtered out a total of 0 records
20:18:44 tRFC: Data package = 000003, TID = 9B7CE88956FD47E8C3670107, duration = 03:00:06, ARFCSTATE = SYSFAIL
20:18:44 tRFC: start = 25.03.2008 17:18:38, end = 25.03.2008 20:18:44
20:18:52 tRFC: Data package = 000001, TID = 9B7CE889236647E8C35F0176, duration = 03:00:08, ARFCSTATE = SYSFAIL
20:18:52 tRFC: start = 25.03.2008 17:18:44, end = 25.03.2008 20:18:52
20:18:57 tRFC: Data package = 000002, TID = 9B7CE88917F647E8C3640256, duration = 03:00:10, ARFCSTATE = SYSFAIL
20:18:57 tRFC: start = 25.03.2008 17:18:47, end = 25.03.2008 20:18:57
20:18:57 Job Finished

Background job is running for long tome in source system (ECC)

Hi All,
Background job is running for long tome in source system (ECC) while extracting data to PSA.
I checked in ECC system SM66,SM50 the job is still running
in SM37 the job is Active
There are only maximum 7000 records the extractor is 2LIS_02_ITM but it is taking 11 to 13 hours to load to PSA daily
I had checked enhancements every thing is correct.
Please help me on this how can I solve this issue.
Regards
Supraja K

Hi sudhi,
The difference between Call customer enhancement... and Result of customer enhancement:... is very less we can say this as a second.
The difference is between LUWs confirmed and 1 LUWs -
   and Call customer enhancement -
Please find the job log details below, and give me the solution to ressolve this
01:06:43 ***01:06:43 * ztta/roll_extension........... 2000000000                              *                 R8           050
                 R8           048
01:06:43 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA     RSQU          036
06:56:31 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 5.208 records                  R3           407
06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
06:56:31 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 5.208 records                      R3           407
06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
06:56:31 PSA=1 USING SMQS SCHEDULER / IF [tRFC=ON] STARTING qRFC ELSE STARTING SAPI                 R3           299
06:56:31 Synchronous send of data package 1 (0 parallel tasks)                                      R3           410
06:56:32 tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =                           R3           038
06:56:32 tRFC: Start = 00.00.0000 00:00:00, End = 00.00.0000 00:00:00                               R3           039
06:56:32 Synchronized transmission of info IDoc 3 (0 parallel tasks)                                R3           414
06:56:32 IDOC: Info IDoc 3, IDoc No. 1549822, Duration 00:00:00                                     R3           088
06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
06:56:32 Altogether, 0 records were filtered out through selection conditions                      RSQU          037
06:56:32 Synchronized transmission of info IDoc 4 (0 parallel tasks)                                R3           414
06:56:32 IDOC: Info IDoc 4, IDoc No. 1549823, Duration 00:00:00                                     R3           088
06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
06:56:32 Job finished                                                                               00           517
Regards
Supraja

Request: Problem in Extraction of data from CRM to BW

Hi Gurus
I have problems in extracting the data from CRM to BW.I thought you are the one who can solve them:
1) When I check the data in the datasource in RSA3 i can see all records as well as i can see complete data in that but when i extract and check the data in cube i can see all records but i cannot see the complete data i.e some data is missing.
2)And another problem is that In report i have 2 characteristics(DATS) start date and end date now i am trying to get number of days from start date to end date.
I appreciate you in advance. If u find any good documentation please send me to [email protected]
With regards
Nagamani.

Hi krishna,
yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM

Data extraction taking long time in source system.

Hi all,
I have created one custom datasource which is full update (not delta).
we are extracting data using function module in the source system.
it works well in Dev system but when I try to pull even 10 days data from source system to BW in production environment it generates huge log in source system. job log gets full & we have to cancel the job.
Job log looks as follows
Job started
Step 001 started (program SBIE0001, variant &0000000642922, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZDSHIPTRACKN
*          Current Values for Selected Profile Parameters               *
* abap/heap_area_nondia......... 2000000000                              *
* abap/heap_area_total.......... 2000000000                              *
* abap/heaplimit................ 40000000                                *
* zcsa/installed_languages...... DE                                      *
* zcsa/system_language.......... E                                       *
* ztta/max_memreq_MB............ 2048                                    *
* ztta/roll_area................ 6500000                                 *
* ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 3,858 records
Result of customer enhancement: 3,858 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 3,858 records
Result of customer enhancement: 3,858 records
PSA=0 USING & STARTING SAPI SCHEDULER
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
IDOC: Info IDoc 2, IDoc No. 7775180, Duration 00:00:00
IDoc: Start = 28.01.2011 11:26:36, End = 28.01.2011 11:26:36
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Can someone plz tell me what can be the issue.?
Thank you

Hi
Whats logic for datasource?
can you share code here?
it might work fine after some ABAP tuning.
Regards
Sudeep

Enhancing a rough recording

Similar Messages

Maybe you are looking for