Enhancing Essbase performance using Exalytics box
Hy,
I moved my essbase platform to Exalytics. But, I'm disappointed. My calculation times still the same.
It's a Hyperion Planning cube therefore it's a BSO.
I put the ORACLEHARDWAREACCELERATION TRUE in the CFG. Changed data caches and commit blocks settings.
I saw something about RAMDISK. But, if the power shutdown I lost my database !!!
What is the infrastructure recommended ? Any help ?
Thanks
Marcos Botelho
I am not believe in Exalytics because
Essbase it is old man - and can't do utilisation for all newest hardware.
-- Essbase CalcParallel - can't work correctly since 5 years from first implementation
-- Essbase Don't Really need in the RamDrive. in all performance test - it's getting only 20% vs SATA II drive.
Because Can't Calc more data block in single CPU mode.
My opinion it's simple
-If you need real decision for getting better performance
u have only one way - It's redesign application:
Use simplest Essbase calculation
NEVER use CREATENONMISSINGBLK and other
- create calculation from source slice
FIX (Source)
MBR1(
target->MBR1=MBr1;
ENDFIX
If u realy need big complex essbase calculation - use Essbase Custom Relation Calculation.
Similar Messages
-
Unable to load data into Essbase cube using Essbase Studio
Hi
We are creating an essbase cube using Essbase Studio using flat files as data sources.
We have taken different hierarchies into different flat files and created one fact file having dimension intersection along with data.
We are able to create the cube and the hierarchy but not able to load any data.
We are getting the following error
Failed to deploy Essbase cube.
Caused by: Unable to perform dataload from more than one flat file.
Could anyone please help on this?Oh this was killing me, so I did this test in 11.1.1.3:
1) Excel 2007 format -- no go, Essbase didn't see it
2) Excel 2003 format, three sheets -- only the first sheet was read into an empty rule
3) Excel 2003 format, one sheet -- the first sheet was read into an empty rule
4) Excel 95 format, one sheet -- the first sheet was read into an empty rule
The lesson?
1) Excel 2007/2010 sheets don't work (no surprise there as the .xlsx format isn't supported).
2) Excel 2003 and lower (hey, if you have Excel 4, I'll bet that works as well) work, but only the first sheet is recognized.
Regards,
Cameron Lackpour -
Hi,
I am using Oracle8i on UNIX platform. I have written a PL/SQL block which opens two cursor on a huge table with 5 million rows.
Now the problem is that the block is too slow. Is there any way I can enhance the performance and keep using the cursors too ?
Thanks
Rachna BarejaCan you limit the number of rows fetched, maximizing the index usage?
Hi,
I am using Oracle8i on UNIX platform. I have written a PL/SQL block which opens two cursor on a huge table with 5 million rows.
Now the problem is that the block is too slow. Is there any way I can enhance the performance and keep using the cursors too ?
Thanks
Rachna Bareja -
Essbase Perform backup, recovery, application migration and task automation
Hi Everyone,
I am very new (actually starting) to Essbase and trying to learn it from the documentation and examples available on the web. At my job, we just are planning to use Hyperion Essbase for planning and budgeting application. As I am the Oracle DBA so the installation and admin tasks are falling on my shoulders. Can you please refer me to the documentation, Note or References for Essbase Performing backups, recovery, application migration, task automation and optimization. Or a starting point from where I can explore the Essbase administration part only.
Thanks
-Samar-Hi,
There is documentation available
Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide Release 11.1.1.3 =
http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_backup_recovery/launch.html
or pdf version - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_backup_recovery.pdf
System 9.3.1
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hfm_backup.pdf
All documentation
http://www.oracle.com/technology/documentation/epm.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi All,
I would like to clarify on few points.
THere have been a lot of post sover here on the support matrix of Oracle EPM 11.1.1.3. I have gone through the Matrx and have a few queries.I would like to know whether my understanding is right.
Which one is compatible
32-Bit Essbase on 32-Bit Box - Compatible
32-Bit Essbase on 64-Bit Box - No additional benefits at essbase level. Can we expect an increase in performance at OS level?
64-Bit Essbase on 64-Bit Box - Improved performance both at essbase level and OS level.
Now, Can we install a 64-Bit Essbase on a 32-Bit Box? I don't think this is suggested option to go for. But does it really supports?
Need your imputs on this.Amarnath wrote:
Hi All,
I would like to clarify on few points.
THere have been a lot of post sover here on the support matrix of Oracle EPM 11.1.1.3. I have gone through the Matrx and have a few queries.I would like to know whether my understanding is right.
Which one is compatible
32-Bit Essbase on 32-Bit Box - Compatible
32-Bit Essbase on 64-Bit Box - No additional benefits at essbase level. Can we expect an increase in performance at OS level?
64-Bit Essbase on 64-Bit Box - Improved performance both at essbase level and OS level.
Now, Can we install a 64-Bit Essbase on a 32-Bit Box? I don't think this is suggested option to go for. But does it really supports?
Need your imputs on this.Hi,
32-Bit Essbase on 64-Bit Box - No additional benefits at essbase level. Can we expect an increase in performance at OS level?You shouldn't expect an increase in performance.
Now, Can we install a 64-Bit Essbase on a 32-Bit Box? I don't think this is suggested option to go for. But does it really supports?No, I doubt the installer would even allow it.
Cheers
John
http://john-goodwin.blogspot.com/ -
Teardrop-shaped overlay when using YouView box
Hi,
I've got a minor problem. When using the YouView box, a teardrop-shaped overlay has appeared. The overlay will be static at times, and also jump slightly. It's not the first time this has happened, but I can't remembered what got rid of it the first time. This time, after starting in the top left, it's now migrated right to the middle of the screen.
Obviously I'd rather not reform a compete reset on the box (the last time it happened, I didn't), so any wisdom would be gratefully appreciated. Steps I've already performed:
Switching the box off at the mains
Leaving it off overnight
Switching between different HDMI cables
Unplugging the Ethernet cable. Reconnecting it.
Checking for software update, and rescanning for new TV channels.
Staring angrily at it.
Like I said, any help would be great.
Thanks.
Solved!
Go to Solution.UncleM1ch4el wrote:
Just a guess really but have you got anything plugged in the usb port? or registered a device on either apple or Android using the youview app. I mention this because the shape looks a bit like a large mouse pointer?
Thank you! Days of headscratching, all because of a USB charging hub plugged into the back of the box. The 'teardrop' may very well have been a mousepointer.
Thanks again! -
How can one decide which queries need BIA to enhance their performance?
How can one decide which queries need BIA to enhance their performance?
Queries with high data access times will usually require BIA. This can be found by using the Event IDs...
Please do not post across forums - your earlier post was deleted as duplicate.
Also search the forums before posting... this question has been answered earlier...
Edited by: Arun Varadarajan on May 5, 2009 7:24 PM -
Hi guys,
I'm looking for some documents for improving current Essbase 7's performance. Could you please recommend some links/documents/books. Thanks.Hi Wei,
You have to optimize your Essbase DB to enhance its performance. Following topics covers in Essbase optimization: -
● Design Outline to Hour Glass Approch
● Optimizing Essbase Caches
● Optimizing Database Restructuring
● Optimizing Data Loads
● Optimizing Calculations
● Optimizing Reports and Other Types of Retrieval Optimizing
● Monitoring Performance
You can refer chapter IX of essbase database administrator guide for details of each of above topics.
Hope it will help you.
Atul K, -
Error extracting data from essbase cube using MDX method
Hi,
We have some problems extracting data from essbase cube using MDX method, we believe that the problem is the MDX query, this is the problem and query:
ERROR:
[DwgCmdExecutionThread]: Cannot perform cube view operation. Analytic Server Error(1260046): Unknown Member SELECTNON used in query
com.hyperion.odi.essbase.ODIEssbaseException: Cannot perform cube view operation. Analytic Server Error(1260046): Unknown Member SELECTNON used in query
at com.hyperion.odi.essbase.wrapper.EssbaseMdxDataIterator.init(Unknown Source)
MDX:
SELECT
NON EMPTY {[YearTotal].[Jan]} ON COLUMNS,
NON EMPTY {[Total Movimientos].[Presupuesto Base]} ON AXIS(1),
NON EMPTY {[Año].[FY11]} ON AXIS(2),
NON EMPTY {[Escenario].[Presupuesto_1]} ON AXIS(3),
NON EMPTY {[Version].[Trabajo]} ON AXIS(4),
NON EMPTY {[Moneda].[Moneda Input]} ON AXIS(5),
NON EMPTY {[Centros de Costo].[1101]} ON AXIS(6),
NON EMPTY {Descendants([Resultado Operacional],4)} ON AXIS(7)
FROM [DSR02].[ROP]
We try extract data using a sample cube and work fine, this is the mdx query:
SELECT
{[Actual],[Budget]} ON COLUMNS,
{[Sales]} ON ROWS,
NON EMPTY {[Product].levels(0).members} ON PAGES,
NON EMPTY {[East].levels(0).members} ON AXIS(3),
NON EMPTY {[Year].levels(0).members} ON AXIS(4)
FROM Sample.Basic
The model reversed ([DSR02].[ROP]) have the same structure than query need, the query and the model are fine, definitely we can´t see the problem, someone can help us?
RegardsYou will be able to test the MDX query in EAS, it is usually best to test the query first before trying to use it in ODI.
Is there any reason you are using MDX to extract the data, have you tried reportscript as I usually find it more efficient to extract the data.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hello,
I'm not sure where is the correct place to post this topic. I think I'm in the correct place.
First, my system specifications:
- MSI K9N4 SLI
- MSI R4850 512 (A little oced)
- AMD Athlon 64 x2 3600+ @2.5 (oced to 4800+)
- Seagate 160 GB 8 MB cache
- 2 GB RAM DDR2 667 @511
- Windows Vista x64 Ultimate
The "problem" is the following: I'm playing Medal of Honor Airborne and Jericho, both in highest quality. The games performance in general terms is very quickly, the protagonist "walk" normal, no slowdowns, but when the game loaded for the first time I note a frame rate drop that some seconds later disappears and works as should. However when for example, I'm entering in new areas, a new frame per seconds drop is noted again.
Running FRAPS in MOH Airborne show a average FPS of 25 and I think it's low!
So, two questions:
1) This motherboard supports only x8 speed PCIE ports. Is this the reason for the FPS drop? Or this affect only a little?
2) I'm going to buy more memory, two modules of 1 GB each one. The system will be equiped with 4 GB in total. Maybe the games performance are being affected by the memory because Vista needs to read hard disk paging file?
Thanks!Thanks for the replies.
What do you mean with sounds problems? The sound works well.
The PSU is CoolerMaster Real Power Pro 550 Watts.
I'm using Catalyst 8.7 final version. Unfortunately 8.8 doesn't work in my system even with my old card (x1550). When I load Windows CCC.exe close due to problems. Formating doesn't solve the problem so it's a bug from ATI. Maybe 8.9 will fix the issue as others users are having the same problem as me.
What can I do to enhance game performance?
I installed Alone in the Dark and it's playable, but when fire or explosions appear, a frame drop is noted
I'm playing this game in high quality too. -
What are user exits & enhancements & how to use those .
What are user exits & enhancements & how to use those .
Hi,
BADI , Customer Exit / User Exit , Enhancement all are same.
Customer Exit & User Exit terms were earlier used in case of R/3. Now in ECC 6.0 they are known as
BADI means Business Add-Ins.
BADIs :
Use:
SAP provides multiple implementations of Business Add-Ins (BAdIs), which enhance the functions of the Configuration Control component.
In addition, there are multiple empty BAdIs available for implementing a customer-specific logic for special functions.
Pls. find listed below some important PP Enhancements / BADIs :
Exit name Short text
PPAPO002 Publication of APO Data in Transfer from APO to R/3
PPAPO003 Production Order R/3->APO: Check if Operation is APO-Re
PPAPO004 Planned Order Conversion from APO: New BOM Explosion?
PPAPO005 Enh. of Relationships in Proc. Order during Transfer to
PPAPO006 Influencing Initial Supply of Manufacturing Orders
PPAPO007 Overriding Checkbox Fields for Production Order APO ->
PPAPO008 Override Order Type for Planned Order Conversion
PPAPO009 Customer Exit for Addition of Components and Items
PPAPO010 Filtering Components out of Quantity Propagation
PPAPO011 Performance-Related Adjustment of Remaining Duration
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order hea
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measu
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determin
PPCO0014 Select process orders for external relationships
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document link
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0020 Process order: Display/change order header data
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
PPCP0001 P.Cost Planning: Additional Cost Elements for Person
PPEACT01 Customer Fields at Mode D
PPECMP01 Customer Fields for CMP Node
PPECMP02 Customer Fields: CMP Variants
PPEGEN01 General Engineering Node: Customer Fields
PPEMPA01 MPA Customer Enhancement
PPEMPO01 Customer Enhancement for Material Planning Object
PPEMPO02 Customer Enhancement for Model
PPERES01 Customer Fields at RES Node
Alternately you can find User Exits / BADIs in TCode : SMOD ( SAP Enhancements)
Hope this helps.
Regards,
Tejas -
Add Qualification" free enhancement in Performance Appraisals
Hi all
I trying to activate the "Add Qualification" free enhancement in Performance Appraisals.
Can anyone tell me:
1. Can I use this enhancement only in the VB level?
2. How to define correctly the "Refers to Attributes of"
3. How can I set up that the scale will be according to the scale maintained in the Qualification (Q)?
Tx a lot
MayaHello,
You have within PM the possibility to extend the appraisal document with additional elements based on flexible criteria (for example employee, country assignment etc.). The added elements can be appraisal objects (VB/VC) or external objects (D, Q, etc).
These added elements need to be defined in a way that the appraisal application understands it. If we take the Q object, it has no configuration that describes how to be used in an appraisal environment.
Thats where the reference objects come in place. These objects tells the appraisal application how to behave in case of added new elements. A reference element is a VB or VC and has the same settings as a VB or VC you add fixed in a template configuration.
So here you can then say, if you add one or more Q's to teh document then all these Q's use the settings of the reference object (and will use for example only FAPP with scale YHM as per column config on ref. object).
If you have a fix or free enhancement then atleast one reference object needs to exist. however multiple reference objects are allowed, in the implementation of the fix/free enhancement you can then program which element is to be used when.
in the config, double clicking on the entry after 'Refers to Attributes of' will navigate you to the reference object configuration.
Hope this clarifies the concept of reference objects.
Regards and Groetjes,
Maurice Hagen -
Essbase Performance Issues on Sun Solaris 10
We have a new Hyperion Environment 11.1.1.3 with Essbase sitting on a Solaris box. We are running a calculation script under the "FINSTMT" database that is called CALCALL. This is the default calculation for a database in Essbase (it runs a command called CALC ALL). We are running this same calc against the same database outline and data set across the environments to benchmark performance.
The script in the new environment should run faster, but it runs slower. The server is basically sleeping and we were curious if anyone can recommend configurations within the app or for the OS? Things like semiphors, shared memory, etc... Also if anyone has suggests or ideals to tweak Essbase performance on a Solaris 10 machine and/or UNIX. What should I do to the Essbase.config file?
MikeI can't help you solaris tuning, but some things to look at.
1. Is the Essbase.cfg file the same on both servers? You might have parallel calculation turned on in one and not the other. Caches could also be set differently
2. Are the database caches set the same? This could impact performance as well
3. Are you doing an apples to apples comparison? Is one database loaded and recalculated many times while the other is not (or restructured or reloaded) -
How to open a text file without using dialog box
I can open a file using dialog box but I want to open a file without using any dialog box for writing.
With the following commands a new file is created.
File outputFile = new File("outagain.txt");
FileWriter out = new FileWriter(outputFile);
I want to open an existing file and put some more text in it using FileWriter or any other object
rgds,
Arsalanimport java.io.*;
class UReader
BufferedReader in;
BufferedReader input;
String fileName;
public UReader(String fileName)
this.fileName = null;
this.fileName = fileName;
try
in = new BufferedReader(new FileReader(fileName));
input = new BufferedReader(new FileReader("A.b"));
catch(IOException _ex) { }
public final String getContent()
String txt = "";
try
while(in.ready())
txt = txt + in.readLine();
txt = txt + "\n";
in.close();
txt.trim();
catch(IOException _ex) { }
return txt;
public final String getLine(int row)
try
input = new BufferedReader(new FileReader(fileName));
catch(IOException _ex) { }
String txt = null;
if(row <= getRows()) {
try
for(int i = 0; i < row; i++)
txt = input.readLine();
input.close();
catch(IOException _ex) { }
} else {
txt = "Index out of Bounds";
return txt;
public final int getRows()
try
input = new BufferedReader(new FileReader(fileName));
catch(IOException _ex) { }
String txt = null;
int rows = 0;
try
while(input.ready())
txt = input.readLine();
rows++;
input.close();
catch(IOException _ex) { }
return rows;
import java.io.*;
import java.util.*;
class UWriter
PrintWriter out;
String fileName;
String[] txt;
static int NEW_LINE = 1;
static int APPEND = 0;
public UWriter(String s)
fileName = null;
txt = null;
fileName = s;
try
out = new PrintWriter(new BufferedWriter(new FileWriter(s, true)));
catch(IOException ioexception) { }
public final void addContent(String s, int i)
int l = 0;
StringBuffer sb = new StringBuffer(s);
s.replaceAll("\n\n", "\n###\n");
StringTokenizer str = new StringTokenizer(s, "\n");
String token = null;
while (str.hasMoreTokens()) {
++l;
token = str.nextToken();
str = new StringTokenizer(s, "\n");
txt = new String[l];
int k = 0;
String test;
while (str.hasMoreTokens()) {
test = str.nextToken();
if (test.equals("###")) test = "";
txt[k++] = test;
if(i == 0) {
try
for (int j = 0; j < txt.length; ++j) {
out.println(txt[j]);
out.close();
catch(Exception ioexception) { }
} else {
try
out.println();
for (int j = 0; j < txt.length; ++j) {
out.println(txt[j]);
out.close();
catch(Exception ioexception1) { }
public final void writeContent(String s)
int l = 0;
s.replaceAll("\n\n", "###");
StringTokenizer str = new StringTokenizer(s, "\n");
String token = null;
while (str.hasMoreTokens()) {
++l;
token = str.nextToken();
str = new StringTokenizer(s, "\n");
txt = new String[l];
int k = 0;
String test;
while (str.hasMoreTokens()) {
test = str.nextToken();
if (test.equals("###")) test = "";
txt[k++] = test;
try
PrintWriter bufferedwriter = new PrintWriter(new BufferedWriter(new FileWriter(fileName, false)));
for (int j = 0; j < txt.length; ++j) {
bufferedwriter.println(txt[j]);
bufferedwriter.close();
catch(IOException ioexception) { }
}Maybe they are not the best codes, i wrote them a long time ago, so dont ask why i did anything wierd. :D
But anyway it works. -
Cannot Connect to Essbase Server Using MaxL
After installing and configuring planning. I was able to create data source and application. When I shot down and restart the machine. The diagnostics report highlighted these srrors
EPMVAL - 01010 can not connect to Essbase server using MaxL
Network Error - 10061 unable connect to oracle.vision.com:1423. the client timed out waiting to connect Essbase Agent using TCP/IP
Can some help please
chiHi John
This is error from Sharedservices_security_client may it will you to identify the cause of this issue
PMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-04T17:29:20.953+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-04T17:29:24.906+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:13.515+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:19.359+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:24.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:08.812+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:14.875+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:18.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
Thanks
Chi
Maybe you are looking for
-
How to Default Appraisal Template in MSS Performance Management
Dear Friends How can we default a certain Appraisal Template in MSS Performance Management Status Overview. We currently have Appriasal Templatate I ( Used in 2008) Appriasal Templatate II ( Used in 2009) Appriasal Templatate III ( Used in 2010) In t
-
After my upgrade to iOS 5, all downloaded ebooks disappeared from my IPad. All the music in the IPod are also lost. I cannot turn on location services. What can I do to restore these items? Amechy
-
Some of the EXIF metadata is not imported. ISO Speed Rating for Canon S1 IS is missing. No camera I have tested has th Focal Length (35mm) filled in and some lens information is missing. I know the data exist because I can see it in IView and Graphic
-
How can i decalre a varient in my slection screen
I am having 5 selection screen fields for these haow can I declare a varient
-
How to Join two tables using the Inner Join
Hi All, I have two tables i.e table1 and table2 as i have created two otds and my present requirement is to join this two tables and get the results and using this i need to do some logic and update another table3. can some one help me out how to go