Enhancing PD Infotype
Hi all,
How to enhance the Table Infotype in PD (as I know to enhance Field Infotype through PPCM) and may I know is it possible to enhance Table Infotype. If possible, pls help in this regard.
Regards,
V Kumar
Hi nachiappan mv,
Thanks for the reply and there is no information in the material of how to enhance the standard table Infotype and tried with PPCI and it seems there is no CI Include for Table Infotype and may I know how can I enhance the standard Table Infotype. Pls help in this regard.
@ pratyush v
I tried in PPCI but there is no CI Include for Table Infotype and may I know how can I enhance the standard Table Infotype. Pls help in this regard.
Regards,
V Kumar
Similar Messages
-
Hi experts can any one tell me how to enhance OM Infotypes. I mean to say what is the Tcode? i think it PPCI is it correct ? and what is the procedure to enhance the OM infotype? if possible explain with an example.
Thanks in advance.
vamsi.Hi,
Tcode PPCM is used to create OM infotypes.
Give the infotype no. & create the CI include first & then All button.
Hope this helps.
Thanks,
Sarika. -
Hi
I want to enhance infotype 1050 with a note. Could anyone explain (just in short) how i could do that? I can imagine how to enhance with a single entry field - but in this case i want a note (like in 1002 or something like that).
Is there an easy way to do this?
JakobHi Jakob,
1002 infotype is a table infotype which stores tabnr against every entry in 1002.
the actual text is stored in hrt1002 where the tabnr is the key field and the seqnr is each line entered of 79 characters.
I suggest not to follow the same approach in 1050, instead enhance the infotype to include a field which stores a unique no. generated by some custom number range. Then create a text id and element and store the text against it in the z program generated for the enhanced infotype using function modules read_text, save_text.
If you still do not want to do this the best approach would be to add a subtype in 1002 infotype where the job evaluation results are stored, this will require no development.
Regards,
Divya -
Regarding Enhancing Standard Infotype
Dear All,
We have a requirement where in we need to enhance a Infotype which already got enhancement.
I have added a new field in ci_xxxx include of that infotype through PM01. It alreay has a custom field called A and now I want to add Custom field B. But I do not see that field when I open this infotype using PB30. Please advice whether I need to regenerate this infotype or what I need to do so that existing development ( validations or checks) will not get effected and I should be able to see my field there.
Thank you very much in advance.
Waiting for your response.
Best Regards,
AmarHello,
You need to regenerate the Infotype for the new field to reflect in the Infotype screen.Add the custom changes again.
Hope you have selected both radio button for generating the Infotype for applicant as well employee data.
Alternate way is you need to add the new field to the Infotype screen manually .You can do this from SE51.From PM01 you can dierctly goto screen painter by chosing the Screen radiobuton.
Once You have added the field to the screen ,you also need to make the declarations for the field in the module pool program.
Regards,
Malathi V -
Enhance Standard Infotype 1005 in HR
Dear All,
Please suggest how to enhance standard infotype 1005 - Planned Compensation in HR.Transcation PM01 is not allowing to do so ...as no CI include is attached for the same.
Please guide.
Regards,
Subhashhi,
maybe you can achieve your requirement by creating a new custom OM infotype
( if the custom information are linked to the OM entity : org unit, positions.. ) or a new PA infotype ( if the custom information are linked to the employee ) .
Regards luigi
Edited by: luigi la motta on Sep 2, 2011 11:46 AM -
Enhancing Attendances infotype
hello Experts,
We would like to add a text field to the Attendances infotype. When trying to ehance the infotype 2002 using PM01 transaction in Single screen, we receive the below error:
Infotype 2002 can not be enhanced
Message no. PG383
Diagnosis
Infotype 2002 cannot be enhanced because it is not intended to be so by the system.
Individual standard infotypes are not intended for enhancement with the enhancement concept.
Is there an alternate way of enhancing Time infotypes?
Your help is highly appreciated.
Thanks.Our requirement is simply to have an additional qualifying decription for the attendance info record.
In addition to logging attendance hours, we would like our users to specify an additional description (text50) to further describe the attendance.
You are right, I noticed that the structure PS2002 is set to, cannot be enhanced in the ehancement category, not sure why that is!?
Hi ,
Its SAP std , not to enhance certain infotypes as it would create issues while running quota generation(for time infotypes) .
May you can try this option.
1) Create a 9XXX infotype with the fields you want to capture.
2) Call it immediately / or update in the background whenevr 2002 gets created/changed.(thro dynamic actions)
3) Default info from 2002 like dates, sy-uname and other details required.
4) Make sure the end user does not skip this step ,if its done frontend.
Hope this helps.
Rgds
G -
Hi ,
I need to enhance a standard infotype(0743 - Discipline Infotype) .This Infotype has subscreens(tabs).I need to add fields in these subscreens(tabs) . Going through transaction PM01 and enhancing an infotype allows new fields to be added in the main screen ( the common area) , and not the individual tabs .Is there any way to add fields in the tabs of a Standard Infotype ?
Thanks in advance .
Regards,
Sujatasearch this question in the HR forum, this has been answered before
SAP ERP Human Capital Management (SAP ERP HCM) -
Impact of enhancing standard infotypes on service pack upgrade
Hi SAP experts,
I have a situation where in we had enhanced standard infotype 14 ( added custom fields to structure CI_P0014) in development systems and moved to production systems. Now these changes should be moved to project system in which the service pack upgrade is in progress. Will it impact the SP upgrade if I move my transports to these systems? Will it overwrite the sp changes for IT14?
P.S : The support pack was not applied to the system in which the std infotype was enhanced.
Regards,
SameenaYou should re-apply any customer enhancements etc to your development environment after SP's are applied - But only after you have a developer review potential impacts from SP and your development.
I think you would be fine as IT14 isn't updated often in SP's.
Cheers,
Brad -
Hi!
I have enhanced infotype 1007 putting 2 checkboxes.But I m not able to get the value of these fields in the User Exit of the infotype.I have already used the method cl_hr_pnnnn_type_cast=>wplog_to_pnnnn.In the structure,i can see the enhanced fields,but the value of the checkboxes is not shown.
Please help me to solve this problem.
Disha Kundra.Hi
TRy out the BDC method. to update the OM infotypes . Create a single screen in module pool and put radios buttons for thses infotype and perform a call for BDC ,for indivusal infptype
Regards
lakhan -
Hi there!
Is there any way to enhance an OM Infotype such as 1010?? Any User-Exit, BADI or something?
I've been trying to find a solution, but i was unable.
Thanks a lot.Hi,
I dont think we can edit SAP Standard OM infotypes.But we can create custominfotypes in OM.In OM we can create custom infotype using the transaction code PPCI/PPCM/PPCJ.For creating a custom infotype in OM we need to follow the following set of steps:
1.Goto SE11 and create a structure with name HRIXXXX and add the fields with their types/Data elements.Here XXXX signifies its infotype number.We usually use number begining with 9000 to 9999.(FC will suggest this).
2.Now go to tcode PPCI.Give the infotype number and name here.And check if your structure is visible here.If visible click on create button.Now system will create the module pools,screens and db tables.
3.Goto tcode table T777I and maintain the time constraint fot the infotype.
4.Now Double click on infotype per object and maintain the objects for which the infotype has to be maintained.
Now go ahead and test it.Your custom infotype will be available.
Regards,
Chinni. -
PPCI Tcode to enhance OM infotypes
Hi All,
I want to change the screen layout of a particular OM infotype ..say 1005 . And make one existing field as mandatory which is optional in the standard.
In PA infotypes , there is an option to make this requirement satisfy in customizing .
Considering the OM infotype is there any way of doing it . Through PPCI how to do it . When the enhancement option is chosen , it navigates altogether to a new structure . A help is required regarding the OM infotype giving a general view on it .
Regards
GajalakshmiI am not sure but try the Badi HRBAS00INFTY method Before Output
Balaji -
Hi EXPERTS,
i am doing enhancment in pa30 infotype 0021 (mediclaim)
i want to add additional fields as a RADIO BUTTON
mediclaim : yes no
With tcode pm01 i have added this radio button.
BUT IT IS SHOWING DISABLE..
PLEASE SUGGEST..Hi
yes the field is added to the flow logic of screen..
PROCESS AFTER INPUT.
* This chain has to include all input-fields:
CHAIN.
FIELD P0021-ZZ_MEDI_NO.
FIELD P0021-ZZ_MEDI_YES.
MODULE INPUT_STATUS_SUBSCREEN ON CHAIN-REQUEST.
ENDCHAIN.
* infotype specific checks etc.:
MODULE MODULE_PAI_0021.""
but still showing disable in screen pa30.. -
Hello All,
How can I create a new field for infotype 2001 ? I read some documentation and it said that infotypes 2nnn can't be enhanced.
Can I append CI_2001 structure to the infotipe?
thanks in advance
Enrique V.According to SAP Time Management Infotypes CANNOT be enhanced. I think the bottom line is that if SAP didn't include a CI_PXXXX on an Infotype you can't enhance it.
-
How to enhance Timpe Infotype?
Hi,
I want to add a field to IT2001. Hot do I do that. AM sure that this cannot be done through PM01. Can some one let me know whether it is possible at all, if yes how to go ahead
regardsHi,
Suresh is right, there is no provision to enhance IT2001. You may wish to check SAP Note 412261 to confirm this, and a workaround via customer specific infotype. Thanks.
Regards
Kir Chern -
Is it possible to enhance Referential infotypes like 0106, 0213, 0318 etc
Hi All,
Currently I have a requirement to enhance Infotype 0106 so that the new fields should come in PA20 when maintaining/displaying Infotype 0021 ( As 0106 is a referential infotype for 0021 ). I created using PM01 and the fields/screens are created. But when I noticed in the module pool of 0106 (MP010600), there is no call to ZP010600 screen. Normally in all the Module Pool Programs, this set of code will be present in the PBO logic
CALL SUBSCREEN subscreen_t582c INCLUDING subscr_prog subscr_dynnr.
But this is not in MP010600. When I noticed, Infotype 0106 itself is a subscreen.So it cannot call another screen. All my configurations ( T582c, T588M ) are in place. But still the new fields that I had added in CI_0106 is not available in PA20 of IT0021. Please help.
ThanksHi All,
Currently I have a requirement to enhance Infotype 0106 so that the new fields should come in PA20 when maintaining/displaying Infotype 0021 ( As 0106 is a referential infotype for 0021 ). I created using PM01 and the fields/screens are created. But when I noticed in the module pool of 0106 (MP010600), there is no call to ZP010600 screen. Normally in all the Module Pool Programs, this set of code will be present in the PBO logic
CALL SUBSCREEN subscreen_t582c INCLUDING subscr_prog subscr_dynnr.
But this is not in MP010600. When I noticed, Infotype 0106 itself is a subscreen.So it cannot call another screen. All my configurations ( T582c, T588M ) are in place. But still the new fields that I had added in CI_0106 is not available in PA20 of IT0021. Please help.
Thanks
Maybe you are looking for
-
Nokia N80 new firmware version 4.0707.0.7
It's so bad firmware version! I have lots of problems with new firmware version 4.0707.0.7 that I haven't with past version 4.0623.0.42 ! I can't understand what's going on with NOKIA Software Updater! >I can't enter to my "Gallery\Images & Video" fr
-
I recently upgraded to maverick. After that update, unzipping compressed files is not working. Initially the archive utility is starting and progressing when i double click the zip files, then nothing happens. Looks like a serious bug in Maverick. An
-
Hello friends I have a question regarding WIP quantities in SAP, is it possible through some development or BADI to get WIP quanties for make-to-order or make-to-stock environment (manufacturing through production orders). As far as i know SAP associ
-
Adobe is not an option under "open in" on my iPad
Adobe is not an option under "open in" on my iPad
-
WF : Event ReleaseStepCreated not triggered BUS2013/2014
Hi, We have approval WF for PO(BUS2012),SA(BUS2013) and Contracts(BUS2013). We have the following scenario for a PO. 1. When a PO is changed (Value/new line item) when it's approval is still in process and it is Blocked state event CHANGED is fired.