Enlarge timeout for RFC Reciver

how can I enlarge timeout for RFC Reciver?
I know for WS reciever/sender I can use this parameter XMBWS.Timeout.
what do I use for RFC Reciever/Sender and where?
Thanks
kfir

Hi
Check this out :
http://help.sap.com/saphelp_nw04s/helpdata/en/23/fa1f1e5f6841cf92c64dc19d79f290/content.htm
Regards,
Matias.
ps:please award points if helpful.

Similar Messages

It is timeout for RFC?

Hello
When I execute my PHP RFC by abap then it works but for small time executing because when I run the same RFC connection with more data (run about 10 min) then I will in RFC dump:
<* RfcGetData [1] : returns 0:RFC_OK
>TS> Fri Nov 13 15:09:26 2009
*> RfcClose called by external program ...
handle = 1
*> rfcClose called by RFC-Library in file: abrfc.c, line: 565
handle = 1
[1] < accepted > : REG <ac: 12> L sap0 >>> CLOSE abrfc.c 618 (24969625)
[1] < accepted > : REG <ac: 13> L sap0 >>> FREE abrfc.c 620 (24969625)
Versions SAP-REL 710,0,125 RFC-VER nU 3 1016365 MT-SL
<* rfcClose
is it some timeout for RFC or something? (program ABAP was run in background mode )
Edited by: Kosmo on Nov 13, 2009 3:25 PM
Edited by: Kosmo on Nov 13, 2009 3:30 PM
Edited by: Kosmo on Nov 13, 2009 3:31 PM
Edited by: Kosmo on Nov 13, 2009 3:31 PM
Edited by: Kosmo on Nov 13, 2009 3:32 PM

Problem resolved. It was from PHP limit.

Which paramter configures the timeout for rfc call (to R/3 ) from BPM

hi froum,
i have a scenario, with BPM, in which theres a synchronous send to a rcf Function Module in R/3,
now, can u tell me which paramter decides the time out for this Sync call to rfc enabled Function Module in R/3,
i mean which paramater in SXMB_ADM or anywhere else that dictates the time period

Check this out, RFC adapter section
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
Prateek

RFC SDK - timeout for RFC execution

Hi!
I was wondering if there was a way, when using the RFC SDK in client mode, to prevent a RFC call from taking more than a specified time to execute on the server.
Can I use the API RfcCallReceiveTimed?
Thanks,
Mustansir

See note 1056696 - Compiling and Linking RFC Programs with the SAP NW RFC SDK
HP-UX (PA-RISC, 64 bit)
aCC -DSAPonUNIX -DSAPonHPPA -DSAPwithUNICODE +DD64 -Aa +W392,829,818,887 -DSAPwithTHREADS -mt -w +O2 -DNDEBUG +inst_compiletime -c <program>.cpp
aCC -Wl,+n,-z -Wl,-a,default +DD64 -o <program> <program>.o libsapnwrfc.sl libsapucum.sl [and possibly libicudecnumber.sl]
Markus

JCO Timeout for SAP Business Connector 4.7

Environment :
Windows 2000, SAP Business Connector (BC) 4.7
General Description :
SAP BC is used to invoke BAPI's in the SAP R/3 system.
Issue :
Some BAPI's are taking some time to return response depending on user load. Need to provide a timeout for RFC calls invoked by SAP BC using JCO.
Following is the entry in the rfc trace log file when BC starts up ...
000000 -
2005-05-12 11:07:20 EDT
000001 [B2B-SAP.0011.0001] [JNI-LAYER] RFC.nativeSetTraceLevel()                with rc = RFC_OK   leave, [SUCCESS]
000002 [B2B-SAP.0002.0022] Log level set to 10
000003 [B2B-SAP.0002.0025] Registered SAP package trace with core trace
000004 [B2B-SAP.0002.0014] Starting SAP services
000005 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.setProperty(jco.jdsr.comp_name, SAP BC server0023 5555)
000006 [B2B-SAP.0003.0001] Loading native libraries
000007 [B2B-SAP.0003.0002] JCO version: 2.1.4 (2004-10-20) sapjcorfc 2.1.4 (2004-10-20)
000008 [B2B-SAP.0003.0004] jRFCLibrary info: 2.1.4 (2004-10-20)(C:\sapbc47\Server\packages\SAP\code\libs\sapjcorfc.dll)
000009 [B2B-SAP.0003.0003] RfcLibrary version:
This RFC library belongs to the SAP R/3 Release *** 640,0,41 *** MT-SL
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
00000A [B2B-SAP.0011.0001] MiddlewareRFC.setProperty(jco.middleware.wait_for_request_time, 1)
00000B [B2B-SAP.0002.0016] Loaded SAP server configurations
00000C [B2B-SAP.0002.0015] SAP services started
00000D [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
00000E [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setTrace(true), current state false
00000F [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
000010 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setMaxWaitTime(30000)
000011 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setConnectionTimeout(600000)
000012 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setTimeoutCheckPeriod(30000) on pool SERVER-300&USER_RFC&300&EN
000013 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.PoolManager.addPool:
      name = SERVER-300&USER_RFC&300&EN,
      connection = USER_RFC|300|EN|AS=[11.12.7.296|00|]G0|,
      pool_size = 10,
      max_wait_time = 30000,
      pooled_connection_timeout = 600000,
      timeout_check_period = 30000
000014 [B2B-SAP.0005.0003] Pool changed: SERVER-300&USER_RFC&300&EN containing 0 connection(s)
007E72 [B2B-SAP.0006.0001] Executing invoke for ZBAPI_TEST_Service on SERVER-300
007E73 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.execute (ZBAPI_TEST_Service) on handle [2]
Questions :
   1) Is there a SAP BC configuration parameter for RFC execution timeout ??
   2) Any other way of enforcing the RFC time out ??
   3) If there is a way to set timeout on JCO.Client.execute method ??
I really appreciate your help !!

I have tried changes the connection timeout value but if doesnot affect the time RFC. Following is from SAP BC adapter guide ..
Delay (minutes) until an unused connection to a SAP
System is timed out (default: 5)
I think I need similar setting as that for RFC connection !!

Business system for idoc reciver communication channel.

hi gurus,
iam doing one file to idoc scenerio.
for defining reciver idoc adapter ,which type of businees system i required that is configured in SLD.
pls guide me .
warm regards.

Hi
You can use th Buiness system as a receiver for IDOC.
Making sure
1. the LS of the system(R/3) is same in the SLD and it is also reflecting in the adapter specific attributes in the ID.
2. Use the same LS name for the BS pointng to FIle in the SLD.
Complete the IDOC configuration from XI
1. Create the RFC dest from XI to ECC
2. Create the Trfc port and call this RFC dest created..
3. Use this Trfc port in the IDOC receiver
On ECC:
Make sure the Partner Profiles is created properly.
it is suggested to use always the business systems when you deal with IDOC and Proxies.
Edited by: Nisar Khan on Feb 27, 2008 1:31 PM

Runtime Error: "Time out" for RFC.

Hi,
During RFC, I am getting a runtime error stating "Timeout error". Even while the job is run in background I am getting this error. Seems like the time for RFC task is set to 600 secs.
How to resolve this and is there any way we can see time limit set for different tasks?
thanks,
Arun

Hi,
   More info: I am using multithreading or mass processing technique, so the logic has to be written in FM which has RFC enabled. So while the task is in process in background it exceeds the time limit set for RFC i.e 600secs.
Sample code:
    CALL FUNCTION 'ZZ_ABC'
      STARTING NEW TASK gv_task
      DESTINATION IN GROUP gv_grp
      PERFORMING rcvb_endprocess ON END OF TASK
      EXPORTING
        e_batch_date = gv_batch_date
FORM rcvb_endprocess                                        "#EC CALLED
              USING gv_task TYPE any.                      "#EC NEEDED
RECEIVE RESULTS FROM FUNCTION 'ZZ_ABC'
   TABLES
        t_receivables = it_receivables.
gv_rcvd = gv_rcvd + 1.
ENDFORM.                    " RCVB_ENDPROCESS

ACE timeout for different Serverfarms

I have a Business unit that publishes an application that is externally available. We Reverse Proxy the VIP to allow the connection externally. They would like to impose different application timeouts for internal users (1 hour) and external users (30 Minutes) . The application can not differentiate between an external or internal source so our option is either seperate serverfarms with seperate real servers with different configuration files.
My question is, is there any other way to do this within the ACE so that we don't have to spin up seperate Servers with different configuration files.
I would also like to maintain one VIP address if possible.

You can maintain 1 VIP but you'll have to use header rewrite and work with dev. team of your application.
It's related to the session state tracked by a cookie the application sends (either as a Set-Cookie or a token embedded in URLs)
Make two different serverfarms (with the same set of real servers).
Make a class-map matching the IP addresses of internal users (RFC 1918 ?)
For this class-map, add a field in each HTTP request coming in
"X-Internal:YES"
apply this on each request with the option
header-rewrite per-request
The application team just has to parse each header for the pattern you've just added and then changing the timeout value to the one they want.
For the class-default (external users) you can add "X-Internal:NO", it's cleaner but not strictly necessary.

Setting timeout for all the web test scripts in the solution

Hello,
I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
the timeout parameter from the Properties window.
Is there any common setting for timeout available which would be acting across all the scripts?
Thanks.

Hello,
We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
Timeout Property in a web test plugin to set Timeout for all requests in a web test.
About how to write a web test plugin, please see:
How to: Create a Web Performance Test Plug-In
Best regards,
Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

PI 7.11 - Alert creation for RFC Exceptions does not work

Hi folks!
In our PI 7.11 SP04 system we have created an Alert Category as well as an Alert Rule to be informed about errorneous messages in the Integration Engine (ABAP).
The scenario is synchronous SOAP Axis to sRFC, where the RFC answers with an exception that is transferred to a SOAP Fault response message.
Now we see messages with Application Errors in the Integration Engine, but no alert is created. Having a look at the alert creation log using report SXMSALERT_LOGREADER shows us that the system even does not try to create an alert for these messages. Alerts are only created for errors in the Adapter Engine.
Question:
Why does the system not create alerts in this case and how can we achieve this?
Thanx for any hint!
Kind Regards,
Volker

Hi!
Additional information for all:
When forcing an error like "receiver not found" both kinds of alerts are created: AE Alert and IE Alert. Thus in general the alert configuration and the alert rule for IE errors are correct and working - only not for RFC exceptions ....
Regards,
Volker

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

Set a timeout for "read from text file"

I Need to read from a text file on a remote pc and use the read from text file function to do this. It wotks but sometimes this pc is down causing long wait times in my vi.
Is there a way to set a timeout for the read from text file function, or is there an other solution?
Thank you

You could check that the path is valid first before you attempt to read the file. hen put the file read in a True-False case structure based on the results of the check. You can use the function "Check if File or Folder Exists" It checks whether a file or folder exists on disk at a specified path. This VI works with standard files and folders as well as files in LLB files. The function is found in the File I/O --> Advanced File Functions palette.
Tom

Timeout for content

Hello
9iAS with Portal 9.0.2 in Sun Solaris
I am working with Oracle Reports Builder and Oracle Portal.
I've saved my reports with JSP extension.
So, I've made some portlets with these reports into PEOPLE_APP db provider.
Now, when I run my pages with these portlets, some times (most of times) the following error appears instead of the report:
Timeout for content=[any_number]
I've already researched in OTN and Metalink forums, I've changed my zone.properties and http.conf files, but it didn't resolve my problem.
So, what else I need to do in order to solve my problem? Any other ideas?
Thanks.
P.S: We've sent lots of questions with no satisfactory response from Oracle.
We've noticed that Oracle provided extremely poor support.
Maybe this isn't a good solution. Maybe there isn't a solution, at least in this way.
Take a look in some fragments of messages, found in OTN and Metalink forums:
"I've increased the timeout but that doesn't help.
It's also very strange that after rebooting the server in Portal 3.0.8/ias1.0.2.1 my pages appeared in 10-20 seconds and now in Portal 3.0.9/ias1.0.2.2 it takes two to four minutes. And this slow performance is only while retrieving the page for the first time. The second time I retrieve a page it's there in a few seconds.
So, I do not think it has anything to do with the provider's timeout...."
"But maybe it's the Portal-schema itself which causes this problem. I heard someone saying that he missed indexes after a Portal-upgrade --> maybe this is my problem too, although i didn't have any error-messages in the upgrade-logfiles...."
"Unfortunately we did not yet solve these timeout problems. Oracle is currently studying several logfiles and traces.
At first we thought that we had the timeout problems only after starting up the server. But now we noticed that the timeouts are repeated after 5 to 7 days. For some reason it looks as if Portal is refreshing the cache at that moment, but we can not find anywhere a refreshperiod of 120 hours or so..."
"Having wrestled with these Timeout errors for months with no satisfactory response from Oracle, I came across someone's solution yesterday and, for me, it worked immediately. Please keep in mind before doing this that it is in direct opposition to what the new "Troubleshooting Issues in Oracle9iAS Portal Architecture and Performance (3.0.9.8.2)" whitepaper states....."
"After many many performance problems and timeouts issues which Oracle provided extremely poor support we finally learned that all of our problems where related to the same things - Oracle has not tuned this product before shipping it. Numerous little bugs and coding errors were a small part of the fixes. The real problem is that all the indexes have subscriber id as the first column which is always set to one and is not used in the majority of querys which makes these indexes useless for performance... (http://metalink.oracle.com/metalink/plsql/ml2_gui.startup)"
"Sr. Oracle how long do I need to wait for real solutions? (http://metalink.oracle.com/metalink/plsql/ml2_gui.startup)"

You must have registered some provider for your portlets. Go to adminstration screens of portal. Goto edit provider from there and increase the portlet timeout.
Also change the time out value in your provider.xml for the corresponding JSPs.

Timeouts for Portlets

I get timeouts for some of my portlets on a Page that I have
built. I want to know whether increasing the Provider timeout
will stop this problem and where does it get its default seeting
from. If it is hard coded does it override the settings from
zone.properties file.

thanks candance...but I hardly believe that this is the only spot, since I am getting this weird "timeout for content", do you know what's up with that?

Timeout for "new BufferedReader (new InputStreamReader (System.in));"

BufferedReader in = new BufferedReader (new InputStreamReader (System.in));
String message = in.readLine(); The above code waits infinitely until the user enter the data from the command line and presses enter key.
The following code can provide a timeout to the above waiting (it works fine).
But is there a SIMPLER WAY to provide timeout for above waiting, something like setSoTimeout(int milliseconds) method in DatagramSocket, Socket and ServerSocket classes*?*
http://www.coderanch.com/t/232213/threads/java/implement-timeout-threads
=>
import java.util.Timer;
import java.util.TimerTask;
import java.io.*;
public class test{
private String str = "";
     TimerTask task = new TimerTask(){
             public void run(){
          if( str.equals("") ){
               System.out.println( "you input nothing. exit..." );
               System.exit( 0 );
     public void getInput() throws Exception{
          Timer timer = new Timer();
          timer.schedule( task, 10*1000 );
          System.out.println( "Input a string within 10 seconds: " );
          BufferedReader in = new BufferedReader(
               new InputStreamReader( System.in ) );
          str = in.readLine();
          timer.cancel();
          System.out.println( "you have entered: "+ str );
     public static void main( String[] args ){
          try{
               (new test()).getInput();
          }catch( Exception e ){
               System.out.println( e );
          System.out.println( "main exit..." );
}

No. System.in doesn't have a timeout API. Sockets do.

Enlarge timeout for RFC Reciver

Similar Messages

Maybe you are looking for