Enlarged photos show white borders on left and right margins

Should these white margins be present when viewed in enlarged format? I can't get rid of these left and right margins when printing 4x6 borderless format so I assume it needs to be corrected in iphoto first.

Did you crop your photos?
Most digital cameras use a 3:4 aspect ratio. When you print onto 4X6 paper, you will have bands on the sides of the photos. It's the same thing as watching a "letterboxed" movie on television with the bands at the top and the bottom.

Similar Messages

Justify left and right margins of text

Is there any way to justify both left and right margins of text in the P Pro CS5.5 titler?
TIA

Colin,
That is correct. I would guess that it was added about PS ver. 4.0, when Text went from Raster to Vector, while working in the Image. The Paragraph Palette controls Justification.
Jay,
Thanks for the Feature Request. While I seldom alter Justification in Titler, there are some other aspects from PS (and AI and InDesign), that would be useful, such as full Alignment. I keep requesting that, plus some others (Spell Check would be nice, but even PS does not offer that... ), but so far, Adobe has either not been able to adapt Titler, or there have just been too few requests. As Adobe has added concentration on PrPro, it might well be that more requested features will begin showing up. Here's hoping.
Good luck,
Hunt
PS - for major Title work, I usually just go to AI, and then PS (or maybe only PS) to create them as PSD's. Titler is quite good, and so very useful, but when I want/need more, I just fire up another Adobe program.

Remove left and right margin when display portlets

What is the best way to remove the left and right margin when display portlets?
I found a file called \portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\/
MyPortalContentView.cs
But I do not see a place for the left and right margins. What is the correct place to modify these margins? (How about the top and bottom margins too?)
See the green highlight?

That's it yeah, seems to curve upwards at the sides. Dunno whether leaving a heavy book on it might sway it back into position?!
I had the display upgraded when I bought it so presumed it could have been done whilst 'in operation'. Apart from that there's nothing wrong with it really, doubt it's something they would take it back on anyway.

How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

Video with 5.1 surround sound only shows up as center left and right in FCPX?

When I import a video that already has 5.1 surround sound, the clip will show up in only center left and right, according to the audio meters. Other files with surround sound will sometimes play in only the center and left channel. I know the file has 5.1 surround sound because it plays fine through my home theater and it shows there's 6 channels in video information....It just doesn't play right in Final Cut.

gjg8195 wrote:
When I import a video that already has 5.1 surround sound, the clip will show up in only center left and right, according to the audio meters. Other files with surround sound will sometimes play in only the center and left channel. I know the file has 5.1 surround sound because it plays fine through my home theater and it shows there's 6 channels in video information....It just doesn't play right in Final Cut.
Make sure your Project Audio and Render Properties/Audio Channels are set for Surround:
You then need to define your audio stems in the Inspector based on channel, like this:
-paul.

Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Hello,
I need help to adjust the appearance of a carousel component.
As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
Property settings available do not help.
Can anyone have an idea?
[http://i52.tinypic.com/28arlma.png]

Hi,
did you try skinning ?
http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
The skin tag documentation is here
http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
Just have a look for what is available for af:carousel (and note the new skin editor)
Frank

InDesign Showing white line on bottom and right sides

I made sure that my design overlapped for bleed however when exporting to a PDF file it's showing a white line on the bottom and right of the design. I double check to make sure there is overlap and it's still showing up. I have tried searching to see if anyone else has had this issue but no luck.
Any ideas?
Thanks in advance!

Never mind... just got an email from InDesignSecrets that answered my problem. Rookie mistake. It was the fact I did not select the use document bleed settings on export.
Thanks for the help!

How to add left and right margins in Topic?

Hi
I am using RH10, as part of TCS4. I am creating screen layouts by just modifying the existing ones.
I noticed that there is no margin/ space between the topic border and the topic content in it. When I searched for that in mobile.css, I did not find any relevant reference. When I did a Inspect Element on Firefox, it pointed to default.css which I don't find in my Project Setup pod.
How can I modify it? Here is the screenshot of the issue I am referring to:
Please advise.
Sreekanth

Or right click the css, click Edit With > HTML Editor and apply a margin left and margin right to the Body tag. That will affect all the styles in one go.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Split header at the left and right margins

I want to split my header where the book name is by the left margin and chapter title on the right margin. Is this possible?

Hi Jerry: This is my issue. As you can see, I have to tab over and then space over to get it over to the right margin. Seems like quite a silly issue, but I can't figure this one out! Also, in my format toolbar, I can't find the tab that's in your screenshot, nor do I find it when I go to customize toolbar. I'm sure this is an easy fix, and I'm overthinking it.
Thanks for responding.
Eleni

Changing left and right margins

I want to produce a document which will have the pages printed back to back and then bound.
I would like the margins on the inside of the pages to be wider than those on the outside. As I will be printing back to back this means the wider margin will alternate, on the left for p1, on the right for p2 etc.
As far as I can see this is not possible in Pages. Is the only way round this to basically produce two documents one for the odd numbered pages, the other for the even?

Yes it is possible in Pages.
It is called Facing Pages, which has been removed from Pages 5 along with 100 other features, but exists in Pages '08/'09.
Peter

IMovie crops-truncates-cuts-deletes left and right area of ".mov" movie!!!

iMovie crops-truncates-cuts-deletes left and right area of mov movie!!!
I am using iMovie 8.05 on Mac OS X 10.5.8 on Mactel. Is that iMovie '09. The dual-naming is utterly confusing.
OK, here is my problem:
When I import a ".mov" file (generated by screen movie capture via Internet using Snapz Pro X) into iMovie, it shows complete on the lower pane (event timeline). Yet, when I drag from the event timeline pane it to the top left pane (project), the movie shows truncated-cropped (the left and right parts of the screen are not shown). That is, such left and right areas are deleted!
Is this a bug? How to fix it?
Thanks.

Update:
I have seen that I can use the "Window - Cropping..." menu to fit, crop and ken burns, yet if I choose to fit, then all the movie is included which is what I want, but also black areas are shown on top and bottom of the movie which I do not want. Is there a way to delete such black areas?
If instead I try to use crop or ken burns, I cannot include all the movie area, because the real area of the movie is much wider than the area that the iMovie frame allows. Is there a way to select beyond the default area on the left and right, to really include all the movie?
Thanks.

Extending width all the way to left and right?

If you look into the website :
http://mcec.my/
You scroll down and under the sponsor section where you see a pink background, how do you extend the background all the way across the browser screen when the page load?
Because now the left and right side is white and looks weird...
Thanks for any help in advance

The reason that the pink area does not stretch accross the page is because it is constrained by the outer container div.
Your site structure is a typical method of centering a website in the browser. Everything gets placed in a container which is give a width and a left and right margin of auto.
The way to change it is to get that section of the page out of the container. Place it under the rest of the page in it's own container and then add the pink background to that. You might then need to put the content of that section in another div and use the same technique to centre it.
You can see that with the top section of the page, the effect is achieved with a graphic. You could to the same again with a pink graphic and then try to set that in the CSS. However, this won't be easy if the content of your pages changes.
Martin

White Borders Around the Left and Right Edge of a Published Movie

Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
Any help would be appreciated.

You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
<style>{margin:0px;}</style>

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
                              navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
function navL_Out(e:MouseEvent){
          navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
                              navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
          navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

Enlarged photos show white borders on left and right margins

Similar Messages

Maybe you are looking for