Enlarged screen image

I mistakenly must have double tapped to increase the screen size & now it won't go back to its original size. I can't see the bottom line of icons and it's really messing me up. I've double-tapped everywhere I can. I've even restored everything to supposedly go back to the "Factory Settings," but that didn't work either. Any suggestions out there?

hi, my iphone recently went thru xray machine in the airport and the screen was magnified!
it was impossible to key in my password to unlock the phone, through many attempts that i came to learn to tap to the extremme right,left,top,bottom of the screens to stroll around to get to the keying points.
i had successfully clicked on the enlarged icons to get into the settings to reset the phone and since it is back to normal now.
i wonder if this will happen again and what is the problem in the first place?

Similar Messages

The best way to enlarge an image for print?

Hello
I've been designing for print for several years. Occasionally I design large display posters/banners (A0, 6-sheet, billboard etc) which use a photographic image. Assuming that the image I have is smaller at 300ppi than the final print, what is the best way to enlarge the image? Based on my experience, it seems that there are three options (to make it simple, the example here assumes that my image is exactly half the size it needs to be printed at. I'm also assuming that the file I will supply to the printer will be a high res pdf exported from Indesign):
1. Set up the Indesign file at 100% size, place the photo and have Indesign upscale the image to 200%. Export a high res pdf for print.
2. Set up the indesign file at 50% size, place the photo with no upscaling by Indesign. Export a high res pdf and have the printer blow it up to 200%.
3. Set up the Indesign file at 100% size, enlarge the photo in Photoshop to 200%, and place the photo with no upscaling in Indesign. Export a high res pdf for print.
I have been advised that having Indesign upscale the image is not a good idea, and I never do this. I guess that option 3 is probably best, with Photoshop doing the work and the resulting pdf being the correct size. However, it's not always possible to do this – some posters are huge which means that the enlarged photo and the high res pdf will both be huge files, and I think also Indesign has a maximum document set up size anyway. So sometimes I use option 2.
So firstly, why is it a bad idea for Indesign to upscale the image (as I say, I never do this, but I would like to know the technical reason)? Secondly, if the choice is between re-sizing myself in Photoshop prior to exporting the pdf, or having the printer enlarge a high res pdf, which is better? When I say 'better' I mean in terms of the quality/sharpness of the end result. Also, I assume that vector elements in my design will not be adversely affected in either scenario, is that assumption correct?
Thanks

Sorry for the added confusion. It appears, after doing some checking in my CS2 apps ( InDesign), there is no setting for DPI / Output Resolution. Only Transparency Flattener Setting. See screen shot below...
If you select Postscript File in the Print Presets, you can access resolution settings for transparency flattening there, too...
in the "Advanced" tab dialog...
But, I like having the option in Illustrator 10 File > Document Setup where I can set the output resolution to whatever is appropriate. In this case ( below ) I've got it set for 5080dpi / 300ppi. You also have Effect > Document Raster Effect Setting where you can select 300ppi ( see screen shot below )...
...and Raster Effects Resolution setting...
I may have misled you because the apps I have are not CS6; but you should be able to follow along in your CS6 apps in various settings dialogs. Mainly, resolution settings can be set in the Print dialog boxes.
The main thing to keep in mind is, because you are enlarging upon output, the base scaled down file must have enough resolution to maintain its appearance at the final size. In the case of 50% or 25% file resolution should be maximum ( for current apps it appears 300ppi is considered high resolution. Most apps now leave output resolution setting adjusted in the RIP / Print driver.
I still use Distiller because it allows me to setup custom PDF settings and save them for future use. You very well may be able to do that in CS6 apps; but I have a tried-and-true workflow that utilizes Distiller as a personal preference.

How do I enlarge a image?

HI! guys,
I am now learning to program with J2ME. I want to enlarge a image that is smaller that a smartphone screen, but I don't know what to do. Could anyone give me some hints? thanks! Any information or reference is greatly appreciated!

Check out
http://developers.sun.com/mobility/reference/techart/design_guidelines/image_resizing.html
Regards, Darryl

Enlarging an image on mouseover without using Flash

Enlarging an image on mouseover without using Flash
I use DW MX 2004 with Windows 2000
I want to create the following effect. I have two versions of
an image,
geyso_scr... (which is screen size) and geyso_sm (which is
small). On
mouse-over I want a larger window to open on top of my html
page (but
less than the full screen) and show the larger image file in
whatever
size I have created it.
One mouse-off I want to restore the original image.
I tried this with a straight image swap on the following
page:
http://www.tudo.co.uk/testing/hospiz_stiftung/shell/contents/vorstand/vorstand.html
see row 2, image 1, Peter von Geyso.
This works all right (on mouseover there is a shift of about
1 px) but
the screen sized image has been sized down to the original
image (sm image).
How can I conveniently get the large image hovering on top of
the
existing page?
Can someone recommend a tutorial which describes how this is
done?
Or is there a utility which does it?
On similar lines, a client wants to display a list of items
as text in
comparatively small font. On mouse-over he wants the
list-item in
question to become slightly larger (not only to change colour
etc). Can
that be done without converting the text into images.
Is there any tutorial for that?
(No point in arguing with the client that the text should be
made large
enough to read in the first place. I have tried that in
vain.)
Thanks for your help.
Adrian

netlace design wrote:
> Hey Adrian,
>
> Maybe this will work for you. Take a look here at this
demo
>
>
http://www.cssplay.co.uk/menu/magnify
Hi Netlace Design,
This looks interesting, but where do I get the code for this.
How is it
done without javascript.
Thanks,
Adrian

How can I decrease the size of a green-screened image relative to its background image?

In iMovie 9.0.9 if it possible to reduce the size of a green-screen image relative to the size of its background image? Using KenBurns and Crop I can somewhat enlarge the green-screen image. But is there any way(s) to shrink it?

FrecklesandEmeralds schrieb:
Ridiculous or not, it's what I'm working with...is there any way to do what I'm asking?
I gave you the answer:
But you are not aware that an EPUB is a ZIP file.
FrecklesandEmeralds schrieb:
It's just huge, even before I zip it...how can I see what item is taking up the most space?
I did not write that you should zip.
I wrote UNzip it. And have look into the package, what is inside which is causing the size.

IMovie 6 HD - TV Screen Images are blurred

How do I created iMovie DVD that plays clear images and text?
I do not want to keep wasting DVDs experimenting for clear result.
I created iMovie per instructions from another post:
imported screenshots of website using KenBurns effect;
set the effect to 1.0 to stop zooming, and did not allow iMovie to render movie when exporting.
Discussion indicated that blurred image in iMovie would be clear on TV screen.
Imported snapshots were crystal clear in Preview and Photoshop.
Imported iMovie to iDVD and burned DVD.
DVD plays blurred images and text.

Are you saying I should size any still images at 768x576 pix before importing them into iMovie since that is TV resolution?
If you are using PAL, yes. For NTSC, the resolution is 640x480 pixels.
Does it matter what dpi the images are?
No, the dpi is of NO concern in video.
If snapshot captures screen images at 72dpi,
does it help to increase dpi of image in Photoshop?
No.
or is that only interpolating dpi since capture was at 72dpi?
Yes.

I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 297
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
    [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
    [not loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
    [not loaded]    com.logmein.logmeingui.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
    [not loaded]    com.adobe.fpsaud.plist [Click for support]
    [not loaded]    com.google.keystone.daemon.plist [Click for support]
    [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
    [not loaded]    com.logmein.logmeinserver.plist [Click for support]
    [not loaded]    com.logmein.raupdate.plist [Click for support]
    [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.ARM.[...].plist [Click for support]
    [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    HP Product Research    Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    LogMeInSafari64: Version: 1.0.660 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.660 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeInSafari32: Version: 1.0.660 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 10.0.1 [Click for support]
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         7%    ocspd
         4%    WindowServer
         1%    kextd
         0%    ps
         0%    securityd
Top Processes by Memory: ℹ️
    137 MB    Microsoft Word
    120 MB    Safari
    86 MB    ocspd
    82 MB    CalendarAgent
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    310 MB    Free RAM
    1.89 GB    Active RAM
    1.55 GB    Inactive RAM
    544 MB    Wired RAM
    1.13 GB    Page-ins
    8 KB    Page-outs
Diagnostics Information: ℹ️
    Apr 5, 2015, 09:32:47 AM    Self test - passed
    Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
    Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
    Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

Hello,
Please make sure that the next button is pinned to the right side as there in the attached image.
If it is already pinned, you can try removing any embedded HTML code and checking it.
Regards,
Neha

Xperia ZL - when I turn the screen image is not shown

I speak Spanish but try to leave the message in English too. SPANISH: Mi celular ZL presenta un problema, cuando enciendo la pantalla esta no muestra imagen. En otras palabras, la pantalla se ve negra. Esto sucede de forma aleatoria. Si tengo el celular en reposo (pero encendido) (por ejemplo en mi bolsillo o sobre mi escritorio) y quiero utilizarlo, presiono el botón de encendido, pero la pantalla no muestra imagen, el brillo de la pantalla enciende, el tactil funciona pero la imagen no se muestra. Cuando esto sucede, si presiono el botón de encendido 2 veces vuelve a presentar la imagen (la primera vez es como bloquear-apagar la pantalla, la segunda es como volverla a encender). Esto sucede de forma aleatoria entre días. También sucede al querer finalizar una llamada telefónica y separarlo de mi rostro la pantalla no muestra ninguna imagen lo que no me permite finalizar la llamada. También sucede de forma aleatoria cada tanto tiempo. Aunque suceda de forma aleatoria, es molesto y deseo encontrar solución al problema. He restablecido a datos de fabrica muchas veces y no se ha solucionado el problema. Soy de Colombia(país de latinoamerica) y la versión del sistema que tengo es Android 4.2.2 compilación 10.3.A.0.423. Via OTA y por PC Companion no aparece alguna nueva actualización. Si alguien tiene información al respecto, le sucede el mismo problema o tiene algún comentario al respecto, yo agradezco responda este mensaje. Si hay una forma de reportar este problema a los desarrolladores de Sony para que lo tengan en cuenta por favor informarme como hacerlo.gracias. ENGLISH: My cell ZL has a problem, when I turn the screen image is not shown. In other words, the screen is black. This happens at random. If I have the cell at rest (but on) (for example in my pocket or on my desk) and I use it, I press the power button, but the screen shows no picture, the screen brightness on, the touch works but the image is not displayed. When this happens, if I press the power button 2 times again presents the image (the first time is like block-off the screen, the second is like it back on). This happens randomly between days. It also happens to want to end a phone call and separate from my face the screen does not display an image which does not allow me to end the call. It also happens randomly every so often. Although happen randomly, it's annoying and I want to find solution to the problem. I reset to factory data many times and has not fixed the problem. I'm from Colombia (Latin American country) and the system version that I have is Android 4.2.2 10.3.A.0.423 compilation. Via OTA and PC Companion does not show any new updates. If anyone has information about it, it happens the same problem or have any comments about it, I appreciate reply to this message. If there is a way to report this problem to the developers of Sony to take this into account please tell me how. Thank you....

This problem seems to be related to what happens to the model Xperia Z ultra http://forum.xda-developers.com/showthread.php?t=2392252 http://www.xperiablog.net/2013/08/21/some-xperia-z-ultra-owners-complaining-of-defective-screens/ http://www.ubergizmo.com/2013/08/some-sony-xperia-z-ultra-owners-complain-of-wonky-displays/ http://www.xperiablog.net/2013/08/21/some-xperia-z-ultra-owners-complaining-of-defective-screens/ in spanish: El problema parece relacionado a lo que le sucede a los sony xperia z ultra. http://www.movilzona.es/2013/08/21/algunos-sony-xperia-z-ultra-presentan-problemas-con-la-pantalla-de-desbloqueo/

Video out to CRT yields entire screen image repeating

I have posted this problem before with no luck. I'm trying again in the hopes someone can offer a suggestion, or determine if my Powerbook needs servicing. The guy at the Apple Store didn't have much to offer.
The laptop's LCD display works fine. But when I extend my screen to a CRT with the video out on the card, I get my entire screen image repeating and fading off to the right. This makes for difficult text reading and detail work in programs dealing with lines and music fonts. And everyone who looks at my screen wonders if their eyes are going bad. I have tried both inputs on the display (a Mitsubishi DiamondPro 2070, 22" CRT) with no difference. I cannot capture the repetitions in a screen shot. I have tried many different resolutions and refresh rates, with no improvement. The current resolution 1280x1024, 100Hz.
My other computer comes through just fine in the same CRT.
Any ideas on this one? Should I have it sent in for repairs on the video card?
Is this issue called "ghosting"? I thought that was only an issue with LCD displays. Anyhow, I am using the DVI/VGA adapter that came with the powerbook and a Belkin VGA cable (can't recall the cost, but it wasn't cheap).
Thanks,
Jeff

I would definitely try another cable if you have access to one. Otherwise, it could well be your Mac's video output has a problem. Can you try the Mac with another CRT monitor somewhere? That might tell you if the problem lies inside the Mac.

New LG Monitor Screen Image Keeps Shifting a few pixels left and right / goes into power save mode

I just purchased a new LG Computer Monitor from Best Buy today and hooked it up to my PowerMac computer. Shortly after setting it up, the entire screen image started sporadically shifting left and right a few pixels. And then, at seemingly random times, it'll shut itself down, going into power save mode. I checked the cables to make sure they were secure and they seem to be. Could there be some sort of interference that's causing it? Or would it be the graphics card? My computer is only a couple years old. Please help!

Do you have another computer you can plug the monitor into to test?
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

I downloaded a vector file from Shutterstock. How do I edit the text in Photoshop? If i enlarge the image- the pixels are awful and the image is distorted.

i downloaded a vector file from Shutterstock. How do I edit the text in Photoshop? If i enlarge the image- the pixels are awful and the image is distorted.

jessicae28493569 wrote:
i downloaded a vector file from Shutterstock. How do I edit the text in Photoshop? If i enlarge the image- the pixels are awful and the image is distorted.
What is the file format of the vector you downloaded? Custom Shapes have a .PSP extension, and are placed according to this table.
Preference filenames and locations in Photoshop CC
They will then be loadable from the Custom Shapes drop down — click on the cog icon > Load shape > Find your downloaded vector.
Once placed in the image, it will appear as a Shape layer, and can be edited with the Path, and Direct Selection tools (black and white arrows on the toolbar)

Full screen images and full screen color background boxes are cropping horizontally.

Full screen images aren't loading and full screen color background boxes are cropping horizontally. I'm forced to make my images a full screen slide show (of 1 image) to make it work, but then I lose the option to pin the image. Am I alone in this?

Hello,
I would request you to share the a url or few screenshot so that i can get better idea about the issue.
To create a temporry url you can go to File > publish in muse.
Regards
Vivek

Full screen images on page?

I would like to have full screen images on a page that fits to most browsers. I don't know what would be the best width in order to acomplish that.

Hi. I am also trying to have my images appear full screen when previewing in a browser. I realize you can do this by adding an image to the
background of your Muse Document. However, this is NOT what I want to do. Here is a link to website where the images appear full screen,
no matter how you size the browser window. http://www.lexusls.asia/ I too would like my images to appear full screen when appearing in
a browser. I have also included an image of what I am getting when I try this. See how the city image floats in the middle? I want it to fill the
entire screen when viewing in a browser.
Thanks to all who may reply.
matt

Full screen images on E65

How can i put full screen images on my E65??

Well, when you say fullscreen, you mean you want it to cover the active standby apps, as well, as the clock and provider area? If so, then you would have to customize your picture and turn it into a theme. If not, then edit your picture to be 240x320 pixels in the dimension. Your picture could be larger in size as long as it has the same aspect ratio, it should fit in perfect. I have not tried this myself, but theoretically it should work.
Hope that helps.

Enlarged screen image

Similar Messages

Maybe you are looking for