Enlarging Print and Icons

I just loaded CS6 and the program came up with very small print for both words and icons. How do I enlarge everything to normal size??

You may want to try reducing the resolution of your monitor if you are having difficulty with the UI. According to http://www.adobe.com/products/photoshop/tech-specs.html we require a minimum resolution of 1024 x 768. Perhaps try adjusting your resolution settings to this setting and see if it is a bit easier for you to utilize.

Similar Messages

HT5137 i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost colore to gray and stopped responding

i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost color to gray and stopped responding.? most of the pop up boxes will also not respond why?

Thanks Winston, restarting my router worked for me too. Seems that somehow the DCHP (maybe due to the Mountain Lion upgrade?) had assigned the same IP address to both the AppleTV and my iMac. The AppleTV stopped appearing as an AirPlay device for my iPhone and Mac, but still the AppleTV had Internet access.
Restarting the router reassigned IPs and without fanfare, the AppleTV is now available to AirPlay.

File printing and icons for folders in Bridge CS5 - too small to read

Got CS5 and am trying to use Bridge. The folders are too small to read and the print with them too small. The slider at the bottom of the page enlarges the space but the files and printing stay the same size. If I open one the images will enlarge with the slider but I don't want to waste time opening each file to see what is in them. I want to be able to read wha the file is and open the right one first try.
Tried calling "tech support" Those jackasses can't speak English. On hold for 3 hours overall after getting someone, getting cut off and having to call again. I hope Pakistan nukes India and solves that problem.
When I finally got through the guy told me my Photoshop copy was not registered. Funny, it was last week when it had problems. Then I try changing the pasword and it says it did it, but won't accept it.
I hate computers.
So, anyone know how to get this damn probram to make the folders and printing big enough to read without my having to get up to the screen with a magnifying glass like Sherlock Holmes? The screen is a 22inch graphic arts monitor and I don't have this problem with any other programs. Not Breezebrowser, Not Auto Pano Pro, not Photo Mechanic. Just Bridge with this overpriced and overhyped photoshiz crap.

Small, and uncustomizable, fonts has been a com
plaint in PhotoShop also.
Send in a bug report, they do read those, and maybe if enough users complain they will modify the program.

How can I enlarge print and make it permanent so don't have to redo each time go to webpage

when used internet explorer I changed text to little larger and it stayed there. Didn't have to change each time went to a webpage. How can I do this on firefox or if not need to know that

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Is there a way to enlarge Home and Print icon?

Latest version Print and Home Icons very small.
How do I enlarge?

Try to find a theme with larger icons.
*https://addons.mozilla.org/en-US/firefox/themes/

When I try compose an email, just get compose window icon stuck in windows taskbar can't actually enlarge it and use it

Ok, details of installation below, so when I try compose an email, I just get a compose window icon stuck in the windows
taskbar can't actually enlarge it and use it. If I restart in safe mode with all addons disabled, then it works fine. But
If I restart normally and manually disable addons/plugins, then close and start normally again i.e not safe mode, it
breaks, so does not seem to be an addon or plugin but rather something with the configuration.
Application Basics
Name Thunderbird
Version 31.6.0
User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
Profile Folder
Show Folder
(Local drive)
Application Build ID 20150330093429
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Mail and News Accounts
ID Incoming server Outgoing servers
Name Connection security Authentication method Name Connection security Authentication method Default?
account2 (none) Local Folders plain passwordCleartext
account3 (nntp) news.mozilla.org:119 plain passwordCleartext stbeehive.oracle.com:465 SSL passwordCleartext true
account5 (imap) stbeehive.oracle.com:993 SSL passwordCleartext stbeehive.oracle.com:465 SSL passwordCleartext true
Crash Reports
Report ID Submitted
bp-0a8986d2-ff0c-41c3-9da6-e770e2141224 24/12/2014
bp-01f44ba7-3143-4452-ac98-981b62140123 23/01/2014
Extensions
Name Version Enabled ID
British English Dictionary 1.19.1 false [email protected]
Lightning 3.3.3 false {e2fda1a4-762b-4020-b5ad-a41df1933103}
Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
Important Modified Preferences
Name Value
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
extensions.lastAppVersion 31.6.0
font.internaluseonly.changed false
font.name.monospace.el Consolas
font.name.monospace.tr Consolas
font.name.monospace.x-baltic Consolas
font.name.monospace.x-central-euro Consolas
font.name.monospace.x-cyrillic Consolas
font.name.monospace.x-unicode Consolas
font.name.monospace.x-western Consolas
font.name.sans-serif.el Calibri
font.name.sans-serif.tr Calibri
font.name.sans-serif.x-baltic Calibri
font.name.sans-serif.x-central-euro Calibri
font.name.sans-serif.x-cyrillic Calibri
font.name.sans-serif.x-unicode Calibri
font.name.sans-serif.x-western Calibri
font.name.serif.el Cambria
font.name.serif.tr Cambria
font.name.serif.x-baltic Cambria
font.name.serif.x-central-euro Cambria
font.name.serif.x-cyrillic Cambria
font.name.serif.x-unicode Cambria
font.name.serif.x-western Cambria
font.size.fixed.el 14
font.size.fixed.tr 14
font.size.fixed.x-baltic 14
font.size.fixed.x-central-euro 14
font.size.fixed.x-cyrillic 14
font.size.fixed.x-unicode 14
font.size.fixed.x-western 14
font.size.variable.el 17
font.size.variable.tr 17
font.size.variable.x-baltic 17
font.size.variable.x-central-euro 17
font.size.variable.x-cyrillic 17
font.size.variable.x-unicode 17
font.size.variable.x-western 17
gfx.blacklist.suggested-driver-version 257.21
mail.openMessageBehavior.version 1
mail.winsearch.firstRunDone true
mailnews.database.global.datastore.id 8d997817-eec1-4f16-aa36-008d5baeb30
mailnews.database.global.indexer.enabled false
network.cookie.prefsMigrated true
network.tcp.sendbuffer 65536
places.database.lastMaintenance 1429004341
places.history.expiration.transient_current_max_pages 78789
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.flash 0
plugin.state.java 0
plugin.state.np32dsw 0
plugin.state.npatgpc 0
plugin.state.npctrl 0
plugin.state.npdeployjava 0
plugin.state.npfoxitreaderplugin 0
plugin.state.npgeplugin 0
plugin.state.npgoogleupdate 0
plugin.state.npitunes 0
plugin.state.npoff 0
plugin.state.npqtplugin 0
plugin.state.nprlsecurepluginlayer 0
plugin.state.npunity3d 0
plugin.state.npwatweb 0
plugin.state.npwlpg 0
plugins.update.notifyUser true
Graphics
Adapter Description NVIDIA Quadro FX 580
Vendor ID 0x10de
Device ID 0x0659
Adapter RAM 512
Adapter Drivers nvd3dum nvwgf2um,nvwgf2um
Driver Version 8.15.11.9038
Driver Date 7-14-2009
Direct2D Enabled Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
DirectWrite Enabled false (6.2.9200.16571)
ClearType Parameters Gamma: 2200 Pixel Structure: R
WebGL Renderer Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
GPU Accelerated Windows 0. Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
AzureCanvasBackend skia
AzureSkiaAccelerated 0
AzureFallbackCanvasBackend cairo
AzureContentBackend cairo
JavaScript
Incremental GC 1
Accessibility
Activated 0
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.6 4.10.6
NSS 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS Util 3.16.2.3 3.16.2.3
NSS SSL 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS S/MIME 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC

Noticed this in the info supplied:
Graphics Adapter Description NVIDIA Quadro FX 580
Vendor ID 0x10de
Device ID 0x0659
Adapter RAM 512
Adapter Drivers nvd3dum nvwgf2um,nvwgf2um
Driver Version 8.15.11.9038
Driver Date 7-14-2009
Direct2D Enabled Blocked for your graphics driver version.
Try updating your graphics driver to version 257.21 or newer.
Could you update your graphics driver and retest.

HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
Thanks,
Ivette

You would need to get the IP address of your printer then manually add a network print queue.
To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

I would like to print out the icon and title of each of my apps to another document for printing and sharing within my family

I would like to print out the icon and title of each of my IOS apps to another document for printing and sharing within my family. My son has my old iPod touch so I erased it so he could put whatever games he wants to play on that I used to play with. It is difficult to download every game at one time because there is too much to download at one time. I have many hundreds of apps. One way I found was to create a screen grab of each page in iTunes then open it in Preview contact sheet but that is really tiny unreadable image of each screen. I also tried importing a screen shot of the contact sheet into Paint 2 and magnifying it on several pages but that is really blurry. The ideal solution would be to import the icon and text to another app or to provide a print list of apps solution within iTunes.

Create iPad screen shots by briefly pressing the home and on/off buttons together. You will hear a shutter click sound and find a screen shot on your iPad's Camera Roll. You can then print these screen shots as you would any iPad photos.
UPDATE: I assumed you had an iPad. Hopefully your iOS device does have an on/off and home button and is capable of producing screen shots.

Print Command and Icon Disabled in PDF Preview Mode

Hi, can somebody please explain why the File>Print command and the toolbar icon for Print in LiveCycle Designer is permanently disabled when I go into PDF Preview mode? How can I re-enable them? (The Form Properties-Defaults-Preview Type setting has no effect on this). The command and icon are not disabled in standalone Reader or Acrobat.
Harry

Thanks Shari, yes the right-click Print command is there. Strange.
thanks,
Harry

All the script and icons on my iPhone4 have suddenly become enlarged and it´s almost impossible to use them

After making a call on my iPhone4 all the script and icons suddenly became enlarged and it´s now almost impossible to use the phone. Everything is slowed up and only partial amounts of the screen can be seen. Any idea´s on how to restore to normal?

Thank you. All in order now!

PDF 'print' and other 'next' and 'finish' commands hidden behind deep icon tray on monitor. Help!

Pavilion Slimline s5212y desktop, Windows 7
I can't find info on how to control lower icon tray depth so that I can see and click on various program install, PDF print and other 'print', 'next', 'finish', etc. commands.

Hello Veebeep
If I understand you correctly your PDF viewer is not giving you the options you posted above. Click on View and ensure that both Read Mode and Full Screen Mode are unchecked. This should get your options back if you are experiencing that I am thinking you are. If this does not work if you could elaborate a bit on your issue I will try to assist.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Crashing When Printing and Desktop Icons

Hi,
For some reason every program I try to print from crashes. Also, my desktop icons are all generic rather than program-specific. I'm not really sure what happened. I did install new ram today, and took the laptop to work where it tried to find the printers on the network there. Something might have gotten messed up then, I don't know.
I've tried repairing permissions and get these messages:
ACL found but not expected on "private/var/root/Library/Preferences".
ACL found but not expected on "private/var/root/Library".
ACL found but not expected on "private/var/root.
Group differs on "private/etc/cups", should be 0, group is 26.
I have a HP OficeJet 7210. When drop a document into the printers's print queue window things print fine, but every other program I try to print from crashes.
Any ideas?
Best wishes,
Bruce

Hi,
Thanks for resonding. I launched Word, tried to print, and copied this from the error report window that popped up. Hope it is what you are asking for. If not, please tell me where the crash log might be found. In the mean time I'll try uninstalling and reinstalling the HP printer drivers.
Thanks again,
Bruce
Process: Microsoft Word [145]
Path: /Users/clawsonb/Documents/Program Folders/Microsoft Office 2004/Microsoft Word
Identifier: com.microsoft.Word
Version: 080429 (11.5.0)
Code Type: PPC (Translated)
Parent Process: launchd [105]
Date/Time: 2008-11-07 04:41:45.248 -0600
OS Version: Mac OS X 10.5.5 (9F33)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 translate 0xb8152b34 spinlockwrapper + 91256
1 translate 0xb8171633 CallPPCFunctionAtAddressInt + 96207
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 1:
0 ??? 0x800bc4a6 0 + 2148254886
1 ??? 0x800c3c9c 0 + 2148285596
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed6f5 0 + 2148456181
4 ??? 0x800ed5b2 0 + 2148455858
Thread 2:
0 translate 0xb81529ef spinlockwrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
Thread 3:
0 translate 0xb8152b6b spinlockwrapper + 91311
1 translate 0xb817b608 CallPPCFunctionAtAddressInt + 137124
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 4:
0 translate 0xb8152c24 spinlockwrapper + 91496
1 translate 0xb817b31e CallPPCFunctionAtAddressInt + 136378
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 5:
0 translate 0xb8152863 spinlockwrapper + 90535
1 translate 0xb816e79d CallPPCFunctionAtAddressInt + 84281
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813ce79 spinlockwrapper + 1981
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb81715c2 ecx: 0x00000000 edx: 0x00000006
edi: 0x00000091 esi: 0x00000000 ebp: 0xb7fff978 esp: 0xb7fff958
ss: 0x0000001f efl: 0x00000246 eip: 0xb8152b34 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x9022b26c
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
NO CRASH REPORT

ALV Grid and Icon : Printing Problem

Hi, i develop some reports using ALV Grid and Icon and i'm facing printing problem, all report that using ALV grid with the option icon = 'X' cannot print properly, all the character field showing improper icon instead of the text. While all the ALV grid report with the option icon = ' ' can print normally.
Thanks.

Hi,
Check the Demo Program <b>BCALV_DEMO_TOOLTIP</b>, Here i am able to see the Output Properly, and also able to Print them.
Regards
vijay

I just purchased the envy 7640 all in one printer and need to enlarge the print

I just purchased the all in one envy 7640 printer and want to print from my lap top but the printing that comes out is very very small and i need to enlarge it, I am not a real computer whiz so I just need step by step instructions on how to enlarge the copy being printed. Thank You in advance for your help.

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are trying to enlarge the size of a document you are trying to print. While the specific directions will change depending on your operating system, the program you are using, and the type of document you want to print, I can certainly make sure you get pointed in the right direction. Assuming you are trying to print a text document (and please let me know if you are not) then first you will want to highlight the text you are trying to change the text of. Once highlighted you are looking for an option found at the top of most windows. The option usually has a font name to its left such as Times New Roman. When you select a larger font size it will change the highlighted text so that it matches the size you selected. I've included an image of the option below. If you are trying to print something that is not a text document then please let me know what program you are trying to print from as well as what operating system you are using. If you are not sure what your operating system is you can click here to find it. If you have any other questions please let me know. Also, if this resolves your issues then please let other forum users know by clicking on Accept as Solution below my post. I hope this helps and I hope you have a great evening!

Network Connection Failures Affecting Printing and Finder Access

I have a Canon MX320 connected via USB to my iMac running OSX 10.9.1. The latest Canon printer drivers are installed. Everything works fine with this printer and computer combination. The printer is enabled for shaing over the network.
The problem is that occasionally, the iMac seems to disconnect from any other laptop or desktop computer (Macs or PCs) connected through my wireless router. On a mac laptop (also with OSX 10.9.1) I may lose access to shared directories on the iMac, and more often, I lose the ability to print from the laptop. The print queues are unchanged on all Macs, but remote printing over the network fails with the message "printer not connected", even though the only change may have been that the iMac hosting the printer went to sleep.
Sometimes, waking the iMac allows the network print job to go through, but typically not if the print job is initiated before waking the iMac. The printer queue on the laptop will seem fine, with "printer idle", but as soon as the print job is submitted, it briefly reports "looking for printer", and then "printer not connected". Sometimes, everything (iMac and laptop) needs to be rebooted to re-establish a network printing connection through the iMac.
Trying to reset or delete and re-install the printer queue on the laptop does not fix the problem. I am assuming that this is because the remote connection to the server (the iMac) has effectively been interrupted or lost. The iMac may show up in a Finder window on the laptop as a simple PC icon, but with none of the connected directories visible. trying to re-mount the remote directories by connecting to the "server" (the iMac) often fails. It is as if something has happened to break the connection to the iMac, and both Finder and network printing are thereby disabled until everything is rebooted.
Printer error log entries:
E [13/Feb/2014:08:21:43 -0500] Unknown directive BrowseOrder on line 9 of /private/etc/cups/cupsd.conf.
E [13/Feb/2014:08:21:44 -0500] Unknown directive BrowseAllow on line 10 of /private/etc/cups/cupsd.conf.
This problem is intermittent but seems to be happening often after the Mavericks upgrade. One should not have to wake up a remote computer prior to connecting to it, or asking a printer connected to it to print a job.

Hello Rescue_2003
Check to see if Wake for network access is checked in System Preferences > Energy Saver.
OS X Mavericks: Share your computer’s resources when it’s in sleep
http://support.apple.com/kb/PH14244
Regards,
-Norm G.

Enlarging Print and Icons

Similar Messages

Maybe you are looking for