Enocore CS5 error when trying to burn to blue ray disc

My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?

Enocore CS5 error when trying to burn to blue ray disc
My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?
I went to the original motion menu source and saved it as Microsoft AVI (file name: Premiere pro avi for menu.avi) instead of AVCHD hoping that might help and then brought that file into Encore and linked that as the motion video for the top menu (the other menus don't have a motion background). I tried to animate the buttons for all the menu pages. When I click on the Premiere Pro avi for menu.avi asset the options show for DVD Transcode automatic and for Blu Ray Automatic (for transcoding). The file shows as 720X576 and it is 34 seconds long. The top menu is checked to animate buttons and I can uncheck it if I want, the submenus-start at page 1- have the animate buttons grayed out but checked and I can't uncheck these even if I wanted to. When I tried to burn this to disc, it got further along- burning 13.15 gb to disc and then I got the following error message:
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time = 1321.253267 seconds-
I am running Windows 7 64 bit, 2.4 ghz processor Quad core, 6 gb of memory and 69.1 gb free on my external hard drive and 29.7 gb free on my c drive. I have an NVIDIA GE force 8500T card. Any ideas?

Similar Messages

No option to select Blu-Ray folder as source when trying to burn to Blu-ray disc

Hello,
I've created a project at home that I want to put on Blu-Ray. At home I don't have a Blu-Ray burner so I created a Blu-Ray Folder in Encore and brought over to a friends house to burn using Encore. But in Encore it doesn't have the option to select Blu-Ray Folder as a Source, only current project or disc image. I know when doing this with a DVD it gives the option for current project, disc image AND DVD folder. Why not for Blu-Ray? Anything I can do with out having to redo as a Blu-Ray disc image? Thank you

Can't speak for Blu-ray, but with DVD, it is very important that the disc be burned as "DVD Video". For instance in Windows, if you simply drag the VIDEO_TS folder to a blank disc and burn as "Data", it is not going to play in most DVD players.
A computer will usually recognize the content of the disc as being DVD material and will likely play it. But DVD players are expecting a disc formatted a certain way, which a data disc is NOT, and therefore will not play the "data" disc.
A lot of the newer DVD players will play more types of media, such as MP3 and stuff, so possibly more of them would now recognize a VIDEO_TS folder on a data disc, but to do it right, you must burn as a DVD Video.
Most disc burning software will offer options of "DATA" or "DVD VIDEO" because there IS a difference in track layout, and there is special info written to disc that identifies it as a "DVD" also.
In the case of creating a Disc Image, or .iso file, from Encore, then that is a "snapshot" of the DVD with all the right stuff in place, so any software that can use an .iso will make a proper DVD. But again, you cannot just burn the .iso file straight to a disc as data, the software must be capable of creating a disc from an Image.
Hope this makes sense
Thanks
Jeff Pulera
Safe Harbor Computers

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

Could you take a screen shot of the error message and post it?
Can you export a master file OK?
Russ

ENCORE CS6 gives error message during the burning of Blu-ray Disc

I did it again - upgraded my Production Premium CS5 to CS6.
I will not forget CS4 that never came to work. It was not a workable version, but at best an Alfa or maybe Beta version.
I was therefore naturally afraid to upgrade my reasonably well functioning CS5 version, but did it anyway.
My fears kept unfortunately connectors. Audition CS6 scratchy and crunches a lot when I change Audio Device from MME to ASIO. It should be noted, that none of my other programs have this problem neither my Soundbooth nor Audition 5.5 which I fortunately still have installed. So it is only Audition CS6 that crunches with ASIO4ALL.
Encore CS6 is also a problem child. When I try to burn a Blu-ray Disc I get, in the final phase, following error message: Blu-ray Error: "device error", Code: "CreateStcSequence: Fail to write M2S file"
Fortunately, I can open the project file in my Encore CS5, which do not have the same problem. Encore CS6 cannot be used as a standalone application - I still need to have a previous version installed to complete my projects. It is not fair.
Unfortunately I can see that many others have the same problem. Even worse, however, that Adobe still has not come with an update or fair solution of the problem - after so long.
It annoys me infinitely, I every time have to spend so much time on the Internet in an attempt to find solutions to remedy Adobe problems. These are programs I have paid dearly for - exactly twice as much as others living in the U.S. pay - just because I live in Europe.
If there is a user who has some useful suggestions I would appreciate it very much.
I must complain about my bad English.
Thank you in advance.

Hi Jim,
ISO files also works for me, but that's not what I paid for.
So far I use just the previous version CS5, but hope at some point to get CS6 to work.

I'm getting an error when trying to burn Blu Ray.

When trying to burn a Blu Ray disc in Encore it is giving me an error that says, Blu Ray Object "wedding 6-20-09 tru blu.m2v" export
file not found . Please help. Thank You .

First, Fix Encore Win7 Problem http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Second, shorten the name and remove all spaces and non-letter characters
Long File Names Cause Crashing http://forums.adobe.com/thread/588273

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
Regards, Steve

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

"Medium Write Error" when trying to burn a CD!!!!

I keep getting a Medium write error when trying to burn an audio cd using ITunes. I already tried switching out cheap CD-R's for high quality ones and the same thing happens. I also can't burn a picture CD using finder because another error message pops up so i don't know what it could be... Any help would be greatly appreciated!

Could be an issue with the drive itself, especially if you have one of the Matshita drives installed in many Macbook Pro which are reported to be 'krappy' drives. See here for more info...
http://tinyurl.com/kgrz4
Patrick

I am getting this message when trying to burn a cd: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

I have a mac book pro OSX 10.7.5 I am getting this message when trying to burn a cd: The disc can’t be burned, because the device failed to calibrate the laser power level for this media.

Look here:
Burner - device failed to calibrate the laser power level for this media.

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Trying to Burn a Blue Ray dics. Debating on Buying FCP package

I am new to Mac this year. I left the PC world because I thought Apple was supposed to be dominant on the video editing/authoring front. I learned how to Burn a blue ray disc about 1 year ago on a pc in about 1 day. Used My Sony Viao to import Sony HDR-HC3 footage. Edited with Vegas Movie Studio and Authored a yes......actual Blue Ray Disc with DVDit Pro HD. So simple; but slow. My laptop was one of the 1st to have a BR burner. So I bought a new desktop this year and switched to Apple. Why is this such a mystery to make a Blue Ray Disc with my new IMAC. And then I find that my FCE coverts my imported files to Apples AIC codec which are just huge files. This is so frustrating. I am not George Lucas or Steven Speilberg over here. I just want to burn my HD content to Blue Ray. I have waited a year for the technology to get better. Should I Go back to PC?? Should I put my HD Tapes away for another few years and see where technology is then? I am so frustrated. Any advice would be great. I will even pay the $1000 for FCPro. But from what I am reading out there I think I will end up regretting it. Everyone talks about burning your HD content back to DVD!!!! WHY!!!!!

First, the net doesn't have the infrastructure to support file sizes like that en mass.
10 years ago, the net didn't have the infrastructure to move significant video, now it streams it quite nicely. In 5 more years, it will stream most anything you want. Perhaps not in real time, but with a little buffering, it will easily work.
Let just put this rumor that we physical media will be obsolete in 10 years to bed right now.
Why? What real evidence can you put out there to support this premise other than giant media companies have a vested financial interest in maintaining the status quo. We know how well THAT has worked for <name your industry> where the world changed and they did nothing to stay ahead of it.
The Studios dictate what and how we will watch....period!
Yes, they do right now, and so did the record companies then. And now the record companies don't.
And whats wrong with Blu Ray? If you buy an HD set why not buy a BD player too. I waited too long for HD to come to the living room.
I'm still waiting for something worth watching to show up in my living room. Watching bad acting, indifferent lighting and skin problems writ large (which is the staple of most content) is not my idea of an enhanced viewing experience. A small screen (or YouTube) is a much better (more appropriate) venue for most of this stuff.
If I want a "cinema experience", I go to the cinema.
Enjoy your big screen.
Regards,
x

Can not burn a Blu-ray disc

The problem: Can not burn a Blu-ray disc.
I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”. I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems. I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works. The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's. Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc? Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements. I assumed I have to do the same thing with a Blu-ray too. I've tried following this procedure, also tried using the live file system. Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting. One suggestion has been that another program is interfering with premiere elements. I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
I Have a lot of great suggestions from you guys and I really appreciate it. I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system. I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements. I appreciate the input regarding Cyberlink software. I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1. Time is money, the cost of a new Blu-ray burner is insignificant. I will consider this option later.

How do I burn a Blu-Ray disc with menus?

I have a 38 minute project comprised mostly of HD clips (.m2ts, .MP4 and a few .MPG). I try to render the project to Blu-Ray with Premiere Elements 12, it takes approximately an hour to reach 98% with message "Encoding Media", then switches to "Compiling Media" and freezes there (I let it go for 6 hours with no end in sight). Task Manager shows that it is not using any CPU cycles anymore, while it was using up to 96% of the CPU before it reached that point. I've been able to render this project to a DVD, to Folders on my HDD and to AVCHD successfully on a DVD.
For a test, I tried a 1 minute project with the same results. It wasn't until I removed the disc menu that I was able to burn a Blu-Ray disc. I am running project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x4 635 Processor, 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM. I have found a number of references to the 98% completion but no real solutions. Any assistance would be appreciated as I would like to produce a high definition disc with menus...

ATR and jerry9146, thanks for the replies. I am using version 12 of Premiere and, when I attempt to update, it tells me that I have the latest version. I am fairly new to Premiere although I have used other video software before. My motherboard supports up to 16 GB (4 slots) so I could try increasing the memory which would probably speed up the rendering process. I'm not so sure that not having enough memory would prevent it from completing the rendering process but who knows. Task Manager shows CPU usage in the high 90% and shows physical memory in the mid 50% during the rendering process...
My software always finds the media and lets me know if I have the wrong disc in (I had inadvertently inserted a DVD instead). I have tried both H.264 1440x1080i NTSC Dolby and H.264 1920x1080i NTSC Dolby. It does not have a choice for 1080p full HD.
I always cancel out of the Windows popup asking "How do you want to use this disc?" as I assume that Premiere will let the system know. Is that correct?
The movie menu that I chose for this project is a fairly simple one, Faux Widescreen from the General category. It contains 1 main menu and 3 scene menu pages containing a total of 17 scene markers which I inserted myself with Add Marker.
I had already taken out the Stop marker as I had read that it doesn't work for Blu-Ray anyways (and thought that that might have been the culprit). Spacing is good and there is no button overlap.
jerry9146, I have successfully burned an AVCHD file to a DVD thru Premiere and the quality is pretty good. Does the workaround that you suggest produce a Blu-Ray quality file?

Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

David S. wrote:
And yes you can author single track 1080p blu ray discs with Compressor 3.5.
But that's not what the OP asked, "using FCP alone."
Why not use Adobe Premier Pro for editing and Encore for burning?
Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
bogiesan

Enocore CS5 error when trying to burn to blue ray disc

Similar Messages

Maybe you are looking for