Enough hardware

Viewing multiple video clips in PPro is slow, choppy, stops rendering, and frames are routinely dropped.  My desktop PC seems decent; not sure if my hardware is too slow?  Here's what I got.  Should this be enough or should I change anything out?
I'm on CS4 and using winxp with current service packs.  This happens with and w/o 4.1 installed
Dell dimension 8400
Processor, 80547, Pentium 4 Prescott DT, 3.4GHZ, 1 MEGB 800FSB
RAM 3gb
Card, Graphics, 128, radeon X300, Server Enhanced, MRMGA8
Intel ATA/ATAPI controllers (dma enabled)
Hard Drive, 80GB Seagate Barracuda ATA 7.2K, st380013as - USAGE OS
Hard Drive, 500GB, Seagate Barracuda ES SATA 3.0Gb/s, st3500630ns,  - USAGE media cache db
Hard Drive, 1.3 tb Netgear readynas  (x-raid, 4 500gb st3500630ns) - USAGE mass storage
Video plays OK via windows media player.
Thanks.

Video is from -> Sony DCR-SR42
720x480, 29.97 fps, stereo
MPG output(Video Codec:MPEG-2 Video, Audio Codec: AC3/AC3)
Based on the various postings/docs written up on hardware reqs for PPro, I think I’m in the ballbark for DV media.
When I watch task manager, my cpu’s are getting pegged after a minute or two of rendering.  This makes me believe a video card would help with more memory (currently 128mb) to help the cpu.  But there are too many video card options and I don’t want to waste money on hardware that doesn’t make things perform better.

Similar Messages

  • Firefox keeps freezing for around 10 seconds and then continueing. My computer does never ever freeze and has good enough hardware so I suspect there is a problem with the software such as the plugins or anything else around Firefox. What can I do?

    I have an I7 processor, 6 GB of RAM and a GTX 460 GPU.
    As you see it is not a hardware problem.
    It happens quite often on several websites.
    I do not use a lot of plugins or addons. Actually, I use none. The only ones I have are the ones the browser requires to display content such as Adobe software, etc.

    As a temporary get around, dare I say it? I'm using Google Chrome which doesn't have this glitch in it. Been doing so for a couple of days now and no problems at all. I've gone back to Firefox a few times and the two or three second freeze every 10 or 15 seconds resumes, so I'll maybe check Firefox in a few months and see if there is any improvement. Or maybe, I'll be so used to Chrome by then I won't bother.
    Hope this suggestion helps.

  • Dropped Frames During Playback, How Much Hardware Should I have

    I have a Mac Pro Dual Xeon 2.66 with 1 gig of ram and the Nvidia 256 meg card, I added a second hard drive which is a Seagate Barracuda 320GB 7200 RPM SATA 3.0Gb/s and that is my scratch disk. I was trying to play a sequence that is from the tutorial disk in the Final Cut Pro 5 book by Diana Weynard. For those who know the book it is the "adding text" sequence from lesson 15.
    I can play most of the sequences on the book's dvd in real time fine except for this one. With this one as soon as I get to the clips that have a lot of audio channels as well as a lower third text effect I get the dropped frames message. I can render the whole sequence and watch the whole thing fine. Really my question is this: I thought having spent what I did on a mac pro that would be enough hardware power to play back almost anything in real time, but do I need something else like more memory or the faster ati video card to play back this "heavier" sequences?
    I've tried various solutions like deleting my pref file, reducing the number of real time audio mixing tracks to just 2. I even deleted the audio tracks in teh sequence so there were only 2 video tracks that had to play - a person speaking with just one outline video effect on the track above, and still it drops frames.
    Thanks.

    I can play most of the sequences on the book's dvd in real time fine except for this one. With this one as soon as I get to the clips that have a lot of audio channels as well as a lower third text effect I get the dropped frames message. I can render the whole sequence and watch the whole thing fine. Really my question is this: I thought having spent what I did on a mac pro that would be enough hardware power to play back almost anything in real time, but do I need something else like more memory or the faster ati video card to play back this "heavier" sequences?
    Some of those sequences are HD. A single 7200 rpm drive will only deliver one or two HD streams without choking. My 7200 rpm internals will only deliver 4 streams of DV before skipping. If I move some clips to another drive and segregate my render files to another drive I can get up to 6 DV streams but it's not reliable.
    Processing the audio requires significant overhead as does recovering the audio segments of the files. I rarely have more than 6 tracks open.Lowering the playback quality will increase the numbers of tracks you can play in realtime.
    History note: Older NLEs required audio and video to be captured to separate drives, unnecessary with DV.
    bogiesan

  • Can't type anything if i'm in a video game

    Hello, since yesterday I have a really big issue, when I try to type something on skype while a video game is running in the background, it just doesnt work. There's a sort of huge latency that happens only on skype, others softwares such as firefox or steam aren't affected and work well.
    Skype works perfectly when no game is running, same when I'm running little games such as counter strike source or Minecraft. It starts bugging when I play games with huge graphics (heroes of the storm or marvel heroes).
    I really have no idea what to do about it, this problem is really weird because it happened for no reason (I didnt download anything), the games works extremly smoothly so there's no reason for skype to slow down (only 3,5go out of my 8go of ram is used and only 30% of the CPU is used when I play so it's not struggling). And i've tried everything, cleaning the hard disk, reinstal windows... But nothing works :/
    So basically, I can't type messages when I'm playing video games because skype decides to slow down for a really unknow reason... If any of you had the same trouble, could you tell me what's going on, please
    Solved!
    Go to Solution.

    Hi there, im also having this problem, i tried running most of the games on my system, and some that are considered "high end" games, are giving me the exact same problem, but other games are running and im able to message fine, i also got some friends to send me messages, and i can recieve messages perfectly, also i noticed moving the actual window around on the screen or just closing down skype also lags. I have 16GB of ram and 4.4Ghz Octa-Core CPU, i checked my load while on the high end games and it there was more than enough hardware usage left like normal for skype to run, and skype wasnt taking any extra up than before. I also checked by bandwidth and i was having no problems with that as skype would lag even on offline games. 
    I have tried re-installing under a different directory and still the same problem persists, this has only been a problem within the last 24hrs and i haven't installed any other programs that could affect this at the moment.
    *UPDATE* I tried downgrading to an older version of skype, 6.3.0.107. Problem Still persists

  • FireFox STOPS saving session store backup!

    For a few years it's a VERY BIG problem with FireFox!
    It STOPs session saving after a while.
    IT IS NOT a plugin problem!
    IT IS NOT a settings problem!
    IT IS NOT a my stupidity problem!
    IT IS SERIOUS PROBLEM in FIREFOX CODE!
    I do use Firefox..... NO! I do use all the mainstream browsers since first versions of Netscape and IE born!
    In my PCs all 5 current mainstream browsers are installed - IE, FF, Chrome, Opera and Safari (for Win)
    All these browsers have their own pros and contras and all they are in use concurrently or momentarily.
    Mostly used are FF and Opera. Chrome is less used (due to its extremal privacy violation). IE is used for particular purposes primarily ActiveX related, and Safari is rarely used for checking compatibility.
    I'm using FF since v!.x or 2.x
    I have 14 FF profiles in my FF AppData folder and I KNOW WTF I SAY!
    I can't particularly remember what FF version was firstly appeared to be fault, but it was i long ago. A few years ago. I can definitely say it wasn't some of stable 3.x versions.
    Usually I have hundreds of tabs opened at the moment. (Maximum counted is about 370 and it was Opera 9.x on the PC w/1.5GB of RAM)
    It's not a 'quantity' game. I do read hundreds of pages every day and forced to open more and more tabs looking for additional info. I can't close many tabs before I will have complete problem description in my mind and can point and save just a valuable info, which really helps to solve problem. Frequently I should solve a few problems at the same time. While some info is inaccessible or not yet found I switch to another problem and trying to solve it. It's a job and creative process.
    I was very discouraged when I lost a few hundreds of tabs 1st time (since great recovery options first time appeared in browsers). I thought the problem is random, later I thought the problem will be solved in the next releases of FF because it's unbelievable that millions of peoples in the world are using FF and no one have reported such a serious bug. Later I just tried to save sessionstore files manually in the middle of work. I don't like to complain neither ask for help. At first I do my own research and trying to help others with many complicated things. But this problem too complicated for me. FF's sources should occupy a few hundred megs. I should spend at least months to explore code w/o any warranty I could fix the problem. It's too expensive... People who develop this code can fix it many times faster end easier.
    When I saw FF changed session recovery format (which means for me complete module rework) about a year ago and hoped the problem will now should be completely resolved, but NO! It was not resolved in any way.
    I'd experienced this problem ALWAYS with any version of FF (for at least a few years), on ANY PC (I have a few decades) and any modern Windows OS (XP/V/7/32/64/etc), with a 500MB profile with a few plugins installed and with completely new and clear default profile!
    Just try yourself. Setup new profile and work a few days or weeks on any theme(s). Do not close tabs (at least ones, which you wanna explore once more). If your PC has 2-4Gb of RAM you will notice FF stopped to save session info after you will have a 50-100 tabs opened (you'll see sessionstore.js or session-backups\*.js script files reached 15-20-30MB long and stopped to change and it's LastMod date/time(s) are frozen) and after the moment some stupid most probably Ad-related and most probably "Java related" script will hang your FF you will notice all recent tabs (opened a few minutes or a few days ago) gone from recovery.
    I just lost a two days of hard work in a 100-200 tabs related on rare player HW/SW recovery and modding (but God saved a few hundred of previous tabs related to some mobile hacking). I've noticed FF started to hang more and more and checked previous.js, recovery.bak, recovery.js was last modified on Apr, 14 but today is Apr, 16! I've lost one more hour trying to save tabs, even installed Session Manager, promised session saving on user demand but after a half hour of action against hanging FF, plugin showed me that I have NO ONE tab to save. I've managed to copy a few URLs to the text file before FF have completely fallen.
    FF is less RAM consuming but more exposed to CPU overload than WebKit based Chrome and Opera. Safari for Win is just a bunch of bugs. Old Presto based Opera was really fast and resource effective but it was dropped due to "technology" requirements. Chrome and Opera save session info reliable (only rare random problems could occur), but they fall sooner because of RAM overload. And certainly FF has best plugin collection which overcomes Crome's and especially Opera's.
    On other hand Opera has integrated Session manager and you can save all or particular tabs and windows at any moment.
    Sure such feature should be integrated to all browsers. It should be reliable, made at native C level, not at limited and unreliable JS/plugin level as it done in FF Session Manager plugin. User should have an option to save his work at any moment and in any situation, then open it anywhere. Cloud sync can not be offered as the only option. There are many security related objects around and I will never send them (by my will) to any clouds except ones made and completely controlled by me or my structure. I've enough hardware, knowledge and other resources to save my data on my own storage. :)
    On my hand today there are too much "technologies" around. That's ENOUGH!
    Reliability and resource economy should be preferred as the main goal!
    If someone of devs is ready to spend enough time and fix this really annoying and resource consuming issue feel free to contact me and tell me what logs to collect on event.
    P.S. It's time to appear some JS-ProcessExplorer (executed scripts manager) for Browser. Scripts became too powerful, resource expensive and aggressive.
    AdBlock can't eliminate all (btw it's main goal is Ads).
    There should be the way to explore and kill particular scripts by hand, ones which hang and other way disturb stability of browser and user's work! I see no other way out.

    Okay, that's a lot of information. I think the key part for support purposes is this:
    ''TheDrive [[#question-1057777|said]]''
    <blockquote>
    Just try yourself. Setup new profile and work a few days or weeks on any theme(s). Do not close tabs (at least ones, which you wanna explore once more). If your PC has 2-4Gb of RAM you will notice FF stopped to save session info after you will have a 50-100 tabs opened (you'll see sessionstore.js or session-backups\*.js script files reached 15-20-30MB long and stopped to change and it's LastMod date/time(s) are frozen) ...<br><br>
    ... I've noticed FF started to hang more and more and checked previous.js, recovery.bak, recovery.js was last modified on Apr, 14 but today is Apr, 16! I've lost one more hour trying to save tabs, even installed Session Manager, promised session saving on user demand but after a half hour of action against hanging FF, plugin showed me that I have NO ONE tab to save. I've managed to copy a few URLs to the text file before FF have completely fallen.</blockquote>
    You're not the first person to report that the sessionstore.js or recovery.js file stopped updating with new activity. However, it's rare enough that I can't recall whether we have gotten to the bottom of it in a previous thread. I'll see whether I can search it up.
    Meanwhile, someone might be able to come up with a way to watch for problems and extract some debug information, but I'm not personally familiar with such tools.

  • Multiple application instance on the same server instance

    Can we have multiple instances of the same application on a single WLS?? For ex, can I have two app.ear files in different application directories??
              

    Hi Nilesh,
    Can you please clarify your landscape as this will help in getting answers to your question.
    In general adding instances (and/or server nodes) should be considered for increasing capacity rather than impoving performance. Specifcially, adding instances (and/or server nodes on the same host you risk a situation where the processes compete for resources which will have a negative effect on performance. If you do need to combine instances on the same host, make sure there is enough hardware (specifically memory in case of JAVA).
    Hope this helps,
    Best regards, Walter

  • Can 10g Express be installed on a machine that has MS SQL2000/2005?

    I just discovered the 10g Express edition and I have been wanting to learn and work with Oracle for some time now so this is awesome.
    I have a Windows 2003 Server here at my house that currently has both Microsoft SQL 2000 and Microsoft SQL 2005 developer and express editions installed on it. This is just a server of my own that I work with doing development work on my own in my own time in the off hours from work so it is nothing that is heavily loaded with mission critical applications or data or anything of that nature.
    I was wondering if I could install Oracle 10g Express on the same machine or if there were known issues in attempting to install it on the same machine as the existing combination of SQL servers that I already have installed?
    I have enough hardware processor and memory wise so that should not be a problem and again I am doing this as a way of learning and getting to know Oracle so I won't have any massive amounts of data or any other users other than myself working on it.
    Thanks,
    Ira

    Tom,
    I fully understand what you mean so no worries there. I am hopeful that my mileage will be a nice round number, the server I mentioned has nothing on it aside from the various database servers I mentioned and a couple of virtual servers that I also run for development purposes, one of them simulating a Windows 2003 Web Server and the other simulating a Windows XP client machine.
    Thanks for the advise and I look forward to my new venture into Oracle.
    Ira

  • Question about using 1 SETID for Vendor Master

    Hello everyone,
    I work for a large healthcare system and we are currently in the PeopleSoft training classes and are about to move into the design phase. We are a multi hospital system and are moving everyone to PeopleSoft for our ERP system. My questions is for Supply Chain purposes and hope that someone can help clarify. It is our goal to use 1 vendor master SETID for our entire hospital system. Please see my question below.
    The customer account # for a vendor is currently at the set id. The customer account # is specific to an entity as it identifies where the vendor should ship. How can we have one vendor master (setid) and still allow the correct customer account # to default on the PO (the buyer needs this when calling in an order)?

    On each of these 'dumb terminals' I assume you are looking to access the complete Mac desktop from the central Mac?
    Unfortunately, this can't be done.
    In the past, the setup you describe first was used on mainframes where each end node was a dumb terminal. But it was just text.
    Next came X11 which does mostly what you are asking about, but each end node is basically a full computer in itself. You can remotely log into a central server and get a complete desktop session. This would take using a central computer that is running full X-Windows and then you'd need a PC running Linux, or running Windows and a X-Terminal package like Exceed or a Mac with X11 installed (not sure if you can make the Mac X11 do a full-blown desktop X session.) Note that as the central server, you'd need a computer running an OS with full-blown X-Windows (Linux, Solaris, HP-UX, etc.) -- OS X is UNIX but it doesn't run full X-Windows as its window manager.
    Finally, there is what are called 'thin clients' ... a good example is Sun Microsystems' SunRay... it's enough hardware on the client side to provide display, keyboard and mouse. They boot off a central Sun Solaris server and work just like X-Windows clients. The difference here is that the SunRay unit can't work on its own; it has no disk, and has to boot from the SunRay server.
    And of course there's Windows Terminal Services, which lets you do the same thing with Windows. I think that takes Windows Server edition software on the central computer, and then a regular PC as a client.
    Sounds like your only option is to use Mac minis as you suggest. But then there's no need for a central computer to share, obviously.

  • File Size Discrepancy Between Photoshop & the Finder

    I'm trying to be as brief as I can, so here goes. The specific application (PS) is irrelevant, I think. This is about why an app shows one file size & the Finder shows a different file size. In this case, it's a huge difference, due to the file being an image.
    I imported into PS CS, from a CD, an original image, which the Finder shows as 269.4 MB. The file format is TIFF, and the bit-depth is 16, not 8. The Finder shows it as a "TIFF Document." Now. I did a Save As and edited that as a master image file. So, I have two files: the original and the master.
    I substantially cropped (deleted) pixels in the master file. So, at the same 16-bit depth, the master file should be smaller in size than the original. Right? However, the Finder shows the file to be 433.6 MB in size! Photoshop shows the file to be a more realistic 185.8 MB in size. Why is the Finder showing such a huge file size? Why is the Finder storing 247.8 MB more than I need? The Finder shows this file as an "Adobe Photoshop TIFF file," so there has been a change in format. The file is flattened; no layers, etc., are involved.
    One clue could be that the Finder is storing the larger file size to accommodate Photoshop. If one multiplies 185.8 MB by 3, the result is close to the 433.6 MB figure. The 3 stands for the three color channels (red, green, blue) of each pixel (data element) in the image.
    The original image, however, is stored correctly by the Finder. Photoshop and the Finder agree on the 269.4 MB file size. If the above scenario were true, the Finder would be storing the original file at three times the size as shown in Photoshop. In other words, there would be consistency in what the Finder is doing.
    I suppose I could just ignore the discrepancy, but I have hundreds of images to process, and I don't want to have to go into PS every time to get a true reading of file sizes. The Finder should be accurate in doing that.
    I may be in the wrong forum re: Photoshop, but here I think I can find some expertise re: the Finder, since the Finder's storing procedures are in question, to my mind. It's definitely an app/OS interface problem, as I see it. Simply, I edit a file downward in data, save it, yet the Finder saves it at a larger size.

    ...do you think a lot of cloning & healing brush might have added to the file size, even though I cropped the image?
    Yes, depending on your History settings. The more you work on an image, the more history it accumulates. The more different states and sanpshots you save in the History palette, the bigger the file gets as you work on it, because you're storing (within the file) complete information about the file's state before and after every individual change you make to it. What I don't recall is whether that all gets saved to the file in a Save As, or whether the history is flushed each time the file is Saved.
    I should warn you that I am by NO stretch of the imagination a PS expert. I was still using PS 5.0.2 until last February, when I upgraded to CS2 (knowing it will be years before I have enough hardware horsepower to run CS3). I'm a rank beginner with CS2, and if someone else wants to jump in here and point out that I'm all wrong, it will be no surprise to me. And because I never used CS, I don't know whether what I'm describing in CS2 is even relevant here.

  • Portal Page Display Issue

    Hi all,
    We are using Netweaver 2004s Enterprise Portal 7.0 with SP14.
    some times, when the users log in, the main content of the page is getting displayed in the detailed navigation.
    And the actual content area shows empty.
    I usually restart the server instance whenever users complain about this error.
    Can any one help me out?
    Thanks
    Shobin

    Hi,
    The server I am facing this issue, is a  development server and hence it has only very limited usage in terms of the number of users.
    Also, the server has enough hardware resources to support the SAP Netweaver instance requirements.
    But for the last two weeks, we have an application which is accessed by almost 40 users continuously.
    This is a VC composite application which uses Microsoft JDBC driver to connect to a Microsoft SQL Server 2000 database. But even this application is small compared to the available resources we have in the server.
    So, the other option left out in your suggestion is the VM settings.
    Can you suggest me the recommended JVM memory settings?
    Thanks a lot
    Shobin

  • Effort estimate (ABAP) during Unicode Conversion project

    Hi ,
    I am working on a CU&UC (Combined Upgrade and Unicode Conversion) project from 46C to ECC6.
    We are having 8 different codepages (MDMP SYSTEM) and around 10000 custom objects.
    Does anyone have any experince in doing such kind of project ? I am looking at the effort estimate on technical side (ABAP) and functional side.
    Any inputs of Technical effort in such a project with related number of codepages and custom objects will be useful (in man days & project duration).
    Thanks
    Dilip

    Hi Dilip,
    the main effort from ABAP side seems to be testing of the new system and creating the Unicode vocabulary. You need test teams and test plans for all locations and for the vocabulary you need people for all your languages. ABAP coding itself is probably not your biggest problem. You have to switch your system to unicode and then check all your sources. This could be done by a report or transaction (check the documentation regarding the Migration). From my point of view this is the main effort you'll have, testing and building the vocabulary. How big this effort is depends on your system. I think six month are a good time frame for the whole project (I assume you migrate a landscape of 3 systems). Because I'm working in the Basis administration I could not tell you the exact man days, but I would estimate up to two weeks for the vocabulary per language. You should have the numbers for the system tests from previous upgrades.
    The technical migration effort depends on your hardware and time requirements. If your system is big (TBytes) and your downtime is very limited it could be necessary to tune the migration by testing it several times. If your requirements are not that high, then a single test migration could be sufficient. I've done two bigger migrations with 2.5 and 3.5 TB in less than 24 hours but therefore you have to have fast hardware and you have to tune your process well. If you have a single huge table this could destroy all efforts reaching your time target, if for example the index build could not be done in less then your time target. If you have enough hardware resources and time to tune your migration you could reach almost any time (which makes sense - some hours).
    Best regards
    Ralph Ganszky

  • RW-50015 error occured in R12.1.1 installation

    Hi All,
    I am installing oracle apps R12 in my vmware machine(OS:redhat 4,R12.1.1).
    Type of installation:single node
    Db user:oracle
    Application User:applmgr
    metalink note followed:Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
    -Database Installation was successful.I checked the logfiles.Autoconfig completed succesfully.
    -It fails while installing application.At the end it returns the below error.
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button(same error for Help page,jsp also ).
    Checked the log files of applications.Autoconfig has completed with error.
    [CVM Error Report]
    The following report lists errors encountered during CVM Phase
    <filename> <return code where appropriate>
    /apps/j01/VIS/apps/apps_st/appl/ad/12.0.0/bin/adgentns.pl
    No of scripts failed in CVM phase: 1
    I tried to run autoconfig manually in the application tier,but it is hanging.I am not able to connect to the database as applmgr.
    tnsping is also taking very high time.If I restart the db listsner,then for few miniutes tnsping is working fine.but after that it is taking high time.Please help me to solve this issue.
    Thanks
    Jvel

    Hi,
    Timed out( 300000 ): Interrupted Exception
    But when I tired to connect in sqlplus ,it is taking 5 to 10 mininutes to connectIt is evident that sqlplus is taking more than Time Out. So autoconfig is failing
    Do you have enough hardware resources.??? How much is your RAM, Cpu Speed, Enough disk space ?????
    Please make sure you have atleast 4GB RAM.
    Thanks

  • Is JMS based solution is suitable for the following:

    I an new to JMS. Im familiar with its basics (in theory and ran very simple examples).
    I was wondering if a clients server clients system, exchanging text messages and images is suitable for JMS or should I use a non J2EE component. The system should be able to serve about 100 users at the same time with a logic of whom should get certain messages.
    Thanks.

    The main question is number 1; for massive files (over 10-20Mb) you don't want to use 1 message per file; you either need to split it yourself into multiple messages or use some JMS Stream helpers like ActiveMQ has...
    http://activemq.org/JMS+Streams
    Decent JMS providers can handle massive load & high performance, federated networks, load balancing and reliability as well as things like throttling, flow control and so forth along with added features like JMX monitoring of queue depths & throughput rates so questions 2 and 3 can be supported whatever those numbers are - assuming you've got a decent provider and enough hardware :).
    For question 4; you've the option in JMS to choose your quality of service; whether to use persistence or not or to use queues or topics etc.
    I'd maybe make the questions
    1. How big are your images
    2. Do you need point to point or publish/subscribe?
    Though as Steve suggests its always worth testing that your load can be handled correctly by your middleware technologies & hardware.
    James
    http://logicblaze.com/

  • Audio capture - good quality

    I understand that the 5G can capture good quality audio now.
    How?

    No No No they do not. What is it we are trying to do,
    convert the IPOD into a PVR. Not enough hardware in
    the IPOD to do that. You need what I bought:
    http://www.shoparchos.com/product.aspx?sku=2690790&cul
    ture=en-US
    Nope. I just want to access the hi-res audio capture, NOT video capture etc. The 5G iPod DOES allow hi-res audio input; but no one says how...

  • Oracle 8i Post Installation Prob..

    Respected members
    I succesfully installed Oracle8i on linux
    (redhat linux 6.1) . Everything is ok and got a succesfull installation message.
    After it i set Path and everything but
    but getting listner not available or sometime oracle not available message message
    i try to solve prob but still not responding
    any one suggest me some idea . i use tcp/ip
    protocol and i have enough hardware resource required for oracle 8i installation
    Thanking you
    Piyush Patel
    null

    I am having the same problem with my resources.ora as empty.
    PLEASE SEND me the content that should go into this file. I need
    it to start my OMS service.
    my email id is [email protected]

Maybe you are looking for