Enough PSU Power or Not?

In my quest for overclocked 3.5g i get into win7 just fine, but when i run prime it will blue screen and reboot in 3 minutes of test as I could use it at that speed but when i put many task on it it will do the same and reboot. So am thinking its my Psu i have a LS 350 with:DC OUTPUT +3.3V +5V +12V +12V -12V -5V +5VSB
Watts 18A 25A 18A - 0.6A - 2A 350W
So far i only could get to 3315 stable
Could this be the problem not enough amp on the 12v
tHANKS
Cpu: amd 630
Msi 785gm-e65

Corsair is better choice than any of the others you mention and outdo the others in power also when comparing by watts. I mean look at the Ultra, it takes a 550W to have the same +12V~30A as the Corsair CX400W +12V~30A. You've got to be willing to spend a few extra $$ to get something that will last a long time.
The only reason I have an Ultra is it was given to me no cost.

Similar Messages

I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message ' not enough processor power.' I've tried freezing all tracks but this seems to have no effect. I've also bounced all soft synths to audio.

I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
even at the start of the track where there is nothing but a kick drum happening.......

Thank you for the suggestions.
I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
Currently, I am using my Mac's "cheapo" internal audio hardware (haha). I have a one year old 27-inch iMac, a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
https://discussions.apple.com/thread/2718054?start=0&tstart=0
I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac.

Not enough processing power?

I got this tablet for the purpose of my kids being able to play abcmouse.com...but when I try to login to that account on my new ellipsis 7, the website says this device does not have enough processing power to use the website. Can I get something done to the tablet so that it has the ability to access abcmouse.com?

Thanks. My girls also use zoodles and love it! I went to the verizon store and by exploring, the guy found a settings button that we have to click to work on the desktop because it thinks it was on a mobile phone, not a tablet. So I'm happy to say it works as of today! Yay!
Tiffany
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Portable external hardrive; not enough USB POWER

so i bought a toshiba 320gb portable external hardrive, only to read the small print on arrival stating that 'rarely' there may not be enough usb power to power the hardrive, on some computers. of course that means my g4 powerbook. i know i am supposed to use a mini y usb cable...which i bought, however the stupid thing is not long enough to reach my 2nd usb port on the other side of the laptop...rendering it useless.
i am wondering whether a usb to firewire conversion cable will provide adequate power (as everything i read tells me how superior firewire is, power wise) or should i get an extension cable for my y cable....
the whole point of this hardrive is to be portable, yet with all these cables...
or if anyone knows where i can buy a y cable that will actually reach around the laptop??

You could buy a powered USB hub, which will supply enough power, however, since it's plug-in powered it's not extremely portable. I don't know if you can return the Toshiba drive and buy one that runs off Firewire? Another benefit of Firewire is that you can boot off the drive if you need to, which you cannot do with a USB-connected external hard drive. In terms of the dual USB cable, I believe Western Digital sells one that works, or look online at most any store selling computing cables.

Not enough CPU power

Lately, my Mac has randomly been crashing. So, the first solution I tried so far, is to replace the RAM. So, I had upgraded to 16GB instead of the default 4GB, but if I still run an application (mainly videos, or a game), the CPU being consumed by the user will go up to 50% I'm not exactly sure if this normal. I had opened all the applications in the Adobe Master Collection CS5, and the CPU being consumed by the user went up to around 40%-55% and I thought this was fair, but watching a 420p video on YouTube (I'm using Google Chrome) goes ridiculously high just for a 420 pixel video, it takes up 40% to 60%
If this is normal, even with 16GB of RAM installed, how can I increase my CPU power? Also, if I keep my CPU usage under 90% then my Mac doesn't crash.

The only way to get a more powerful CPU is to sell your computer and buy a faster one. CPU power is not related to how much RAM is installed.
If what you described is correct then you might start with:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

Iphone 5 power button not working!! They have replacement program for months but why they dont email you and say it??

I have had iphone 5 and have never been happy and i think apple is not leading the technology and future of market anymore as they are lowering quality of their products(even hardware). I had to change first iphone 5 i had because of wireless issues and then i had battery problem and had to charge 3 times a day and finally after 2 years i bought they decided that its faulty and they decide to change it. Luckily enough i read it on an online tech magazine and after googling i see that they have had replacement for power button as well which i am eligible for as well!! i go to genius bar and they replace battery but they dont replace power button cause they examine it and passes till the audio dock test! It connects to charder dock or cable but it doest to audio test dock and he says one off the pins inside is not right but it charges perfectly with every cable in the store!! And i tell him that they have to change power button not the charging pin cause it doesnt make sense!! Its a faulty product and maybe if they emailed and said it nearly a year ago my pin was right then!! so i think they found a silly reason not to change it and so i am struggling with that phone and brand that i hate(once i used to love)!

ahmetfromlondon63 wrote
And I don't know what these guys are talking about? I have an unsolved hardware issue and I posted here!
This is a user-to-user technical support forum. This is not AppleCare. You are not addressing Apple here. No one here can help you resolve your customer service issue with Apple. Use the Contact Us link at the bottom right of every page for information on how to contact Apple directly. When you talk to them, I'd suggest not using profanity. It makes people less likely to help you.

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I'm trying to get music from an external lacie hard drive imported onto my iMac. I cannot open the Lacie drive since it says 'power pc not supported'. Any ideas here?

I am trying to import mp3s from a lacie external hard drive onto my iMac. They were saved from a dell running windows. My iMac says "power pc not supported" when I connect the lacie drive. Any ideas here, I have about 25GB of music I'm trying to save. thanks

Do not move the music yourself.
http://docs.info.apple.com/article.html?artnum=301748

Power button not working

iPopd touch 4th generation sleep/power button not working.
Any ideas? how long is warranty?

The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
Apple - Support - Check Your Service and Support Coverage
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

HT4061 i left my ipad 3 as i will go to work when i came back from work and able to used my ipad power is not working and the ipad is warm i didnt left the ipad charging.... so i tried to again and outting it on its not working now. pls do the needful

I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful. thanks a lot

I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful. thanks a lot

Enough RG1 balance is not available to issue the Goods

Hi All
I am getting this error when I run "India - Excise Invoice Generation" Request by entering the Delivery Id. The Log file of the request showing this error ORA-20199: Enough RG1 Balance is not available to issue the Goods. But when I check the on hand quantity exists. Quantity is available even after reservation and shipping is done.
Can anyone please tell me the reason and resolution if you had faced this error before.
Thanks in Advance
Prem.

Process steps are as below .
Material master with base unit "SHT-Sheet" and maintained alternative unit "M2- Square Meter" along with conversion factor 4930 M2 = 100 SHT. Incoming quantity inspection type (01) is also active on the material.
Purchase Order quantity in alternative UnM like 1500 M2.
Purchasing Info Record maintained with alternative pricing Unit “M2”.
Good Receipt Quantity posted in the alternative Unit of Measure with 1500 M2.
Usage decision recorded with Base unit Quantity 30.426 SHTs
Error - PU GR blocked stock exceeded by 0.002 SHTs : 2847 1000 M7 22
Cause of error which i observed is below.
On usage decision, system calculating stock posting quantity "30.426" / Conversion factor "( 100 / 4930 )" = 1500.002 and this quantity "1500.002" exceeded from block stock quantity 1500 as posted at the time of GR in the block stock via 103 mvt.

Dv6 power led not working

Hi everybody!
Today, I changed the fan in my Pavilion dv6-6001eh (the original stop working). After I assembly, the power led not working anymore. I check the cable, but that's ok. Otherwise the power button working. The second power led in the right side next to USB, also not working.
Why? Maybe pressed hotkey?
Thank you.

Any advice?

Power book not loading (error: unable to find driver for this platform) help me please

power book not loading (error: unable to find driver for this platform) help

That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
You post is a little cryptic, however. We may be of further help if you can tell us:
<> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
<> what program and its version your were trying to run and/or install.

Enough PSU Power or Not?

Similar Messages

Maybe you are looking for