Enquiry about ACL Direct Link

Is there anyone using ACL Direct Link(Versions 4.0, 4.2, 5.0) for ERP 4.7 to access TABLES on an Oracle database. Our Internal and external auditors would like to use it for their auditing. Is it installed as an add-on. From the Basis and ABAB side of SAP what need to be configured. Any useful documentation will be greatly appreciated.

just check your license agreement with SAP, nothing else but SAP can connect to your Oracle database.

Similar Messages

ACL Direct Link 7 Install for ECC 6.0

Hi All,
Have been in process of implementing the ACL Direct Link 7 on ECC 6.0 EHP4 (MSS2008R2/WIN2008R2). This is used by the Auditors.
I have tried to search the forums for any threads related to this but didn't find so far and hence posting this message.
I understand that it runs couple of reports based on the querys posted by Auditors and the reports output can be large to store in the given output path.
Are there any key things to look at it from ECC performance perspective.
Did anyone face any issues with this operation, which we need to take care of.
Thanks in advance.
Best Regards,
Venkat

Please post this question in SAP Basis Forum.
Alternatively, you can check documents in scribd/ help.sap.com
Raghavan

HT5621 Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please?

Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please? I could do with a step by step guide to follow as am worried about loosing aps, music, photo's etc which are on the individual phones.
Thanks
Mandi

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

Send me link to learn about LSMW - Direct input

hi
Pls send me link to learn about LSMW - Direct input

Hi,
See below links
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://66.102.7.104/search?q=cache:-DE9K5Tj0j8J:www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doclsmwdoc&hl=en
Steps to create
Create project, Subproject, Object (freely definable, for the purpose of
identification) Use create icon in the menu. For example
Project FI Finance
Subproject GL GL MASTER
Object GL GL Master
2. Continue F8, Now you will see series of steps. Select the step and execute
it (Ctrl-F8). In each steps, we will do some activity and save it. Then
system prompts for the next activity.
3. Maintain object attributes. By default the screen in display mode, Click
on pencil button to get into change mode. (This is applicable to upto the
activity assign files). In this screen select Batch input recording and
in Recording give name (freely definable) sal GL01 and click on Overview.
In this screen button (Recordings overview). Now click on create button for
recording. Give name and description, Now it will ask for the transaction
code, enter the transaction code and enter the data, the way you want fill in
the SAP screens/fields with legacy data. Then save the transaction. Now save
again to save the recording. After that you select the button default all,
then save it. And come back, now the cursor is on next activity.
4. Maintain source structures. Here create the structure by specifying name
(freely definable).
5. Maintain source fields. In this screen, click on copy fields (Ctrl+F8),
here select From data file(field names in 1st line). Now the system asks
for the file, select your text file, the system will copy the fiedls from
text file (tab delimited file. It contains field names in the first row).
Save it.
6. Maintain structure relations. Generally, we need not do anything here.
7. Maintain field mapping and conversation rules. Here put the cursor on the
field and click on source field, now you can see the list of field available,
from which select one which is equal to the field on which you out the
cursor. You can also write coding (ABAP Code) on any field for the purpose of
validation of data. Save it.
8. Maintain fixed values, translations, user-defined routines. Here also you
can maintain values, if required.
9. Specify files. In this screen, place the cursor on Legacy data, then click
on create button. The system asks for the file name, (the text file, in which
the legacy data is there), enter the file name, description and select Data
for one source structure (table), delimiter as Tabulator, file structure
as Field names at the beginning of the file.
10. Assign files. The file name you specified in earlier step comes
automatically here, If the file name does not come, then click
on assignment button and assign the file.
11. Read data. Here specify the transaction number (the number not less
than the number of rows in the text file). Execute it.
12. Display read data. Here, you can see the values, how the system read the
data.
13. Convert data. Here specify the transaction number (the number not less
than the number of rows in the text file). Execute it.
14. Display converted data. Here, you can see the values, how the system
converted the data, after interpreting conversion rules specified in the
earlier steps. This is the data that is actually goes into SAP, once the
Batch Input session is run.
15. Create batch input session. Specify the batch input session name for
identification and also select the keep session.
16. Run Batch Input Session. Select the batch input and click Process, from
there select foreground or background. Now the program runs and update
the data in to SAP. You can analyze the batch input for the successful
postings, errors.
Regards,
Omkar.

Does Direct Link from PP to SG actually work?? Does SG actually work???

I have been hassling with this all day.... the project will go over to SG (via Direct link), and I start grading and about after 30-40 mins it will just crash (SG actually closes down)... there is no file / no save as far as I can tell... so all the work I did is lost (and this has happened 3 times now). It is a short 5 min EPK with nothing heavy in the way of transistions. So I read about DIRECT LINKS problems and then tried the EDL method of bringing it over, consolidated to 1 video track as it is limited too (I honestly CANNOT believe this) who edits on 1 video track? This is ridiculious!! But anyway, I get the big red square with all kinds of "not supported" problems and my EDL never actually gets loaded. VERY FRUSTRATED... how am I ever going to even start thinking about grading a 90 min feature if I can't get a 5 min EPK to WORK. So far I am NOT IMPRESSED with SG.... which stinks after I have spent days in tutorials learning the program! Anyone actually ever use SG for a real project before???

Allent,
In direct-link mode, Speedgrade is using a PrPro project file directly ... and is NOT allowed to "touch" that file until you specifically tell it to go back to PrPro. That's a part that is oft mis-understood. It has a few major things to "know" or you'll get frustrated.
First, as you've discovered, there is NO auto-save while working on a direct-linked project in EITHER PrPro or Sg. So ... if you're over in Sg working for more than a few minutes, it is wise to manually save, perhaps adding an iterative letter/number, so that you've got your work to that point protected in case of crash.
Second ... as Sg is locked out of changing the timeline of a PrPro project file in any way, you cannot add a grading layer to the timeline from Sg in a direct-link session. So ... one needs to create any additional/supplemental grading layers one will need in Sg BEFORE leaving PrPro, by putting "adjustment layers" over the sequence or specific clips you'll want to use a separate grading layer on within Sg.
Third ... another hitch some people have been befuddled by is that when you first apply a Lumetri "look" or a LUT, it's in "preview" mode. You need to hit enter or a couple other things that Sg takes as "accepting" that look/LUT permanently before going back to PrPro or that effect doesn't "save" to the project.
So ... any timeline changes have to be done in PrPro. Corrections/grading done in Sg. Saving a file under work in a direct-link Sg session is manual ... and wise. And yes, this is now suited for working while editing, taking over sub-sequences perhaps is a way to look at it? There are some changes in workflow ... but as you get used to them, it is so much simpler than working edl's or DPX or those sorts of things. And quicker.
Neil

Direct link between planned/production order & Stock transport order

Hello,
We have the following situation.
Plant A = ordering/receiving plant
Plant B = producing/selling plant
Material is stock material in plant A (reorder point planning). If required, plant A creates intercompany purchase order with plant B as vendor.
Standard SAP behaviour: MRP run will create planned order in plant B but there is no direct link between the intercompany purchase order and the planned order. It can as well be that this planned order combines several requirements.
Our requirement: Have a 1 to 1 relationship (and a direct link) between the intercompany purchase order and the planned order (and also with the production order which will be generated afterwards). The solution we think about: After creation of the purchase order, create firmed planned order (or immediately production order) by means of a bapi.
My question is whether there are standard SAP solutions for this?
Best regards
Kurt

When customer give order and then it creates sales order.
depends on material - I mean Finshed good or Comapny own product ,
If it is outside material ,it creates Purchase req and then Purchase order.
if it is company material ,it creates Planned order and then production order.
Check the transaction you will get better idea.
MD04
MD02
MDBT
LS24
LS26
MMBE
CO01
CO02
CO03
CS03
ME51N
ME52N
ME21N
ME22N
VA01
VA02
VA03
Reward Points if it is helpful
Thanks
Seshu

Poor Speedgrade performance using premiere's Direct Link

I am having a problem grading my project in Speedgrade using Direct Link from Premiere.
My project is in total 7min 30sec long consisting of MP4 video from my Canon T5i/700D. Video had a slightly higher bitrate (CBR) than usual (1.4 maybe?). In premiere I have done a bit of stabilizing using after effects (warp stabilizer) and denoising (magic bullet denoiser II) . All of these I used the 'replace with after effects composition' option. These shots make up about 1/6th of the total sequence. All my project files are located on my SSD (I thought moving them there would help. It doesn't). worth noting I am also using a custom LUT designed for CineStyle which I'm using on my canon.
My problem is the speed. It's not even a little slow. It's unusable. Let's say I select midtones and want to up the offset a tiny bit. I click the slider and slowly move my hand up. I then have to wait around 10 - 15 seconds for speedgrade to even start recognising the change. If I let go the mouse it means I have to wait again a long time to change it once again. It's the same for all the other sliders (color temp etc.)
I've grown to like using Speedgrade for color correction but now it's taking far too long. What should take around 20 seconds per clip is taking around 5 - 10 minutes. Also as a result my correction and grading is gotten pretty bad (it wasn't that good to start off with). Restarting it doesn't help as it's just as slow when it starts as an hour later.
Is anyone else experiencing this problem? Any ideas?
As I'm in a bit of a rush with this project I'm going to try just do the grading in Premiere. I've never done grading in the CC version of premiere, so is there any new color tools someone could recommend?
Thanks.
Creative cloud: up-to-date as of 13/01/2015
OS: Win7 pro
CPU: i7 930 OC'd
GPU: Nvidia GTX660 x 2 (SLI) Enabled for adobe's engine
RAM: 32GB 1800DDR4
SSD: Samsung 840 Pro 512 GB

Looking through your gear for a quick idea ... it appears you're running twin (separate) video cards? You might try a quick disable of one card, and see if Sg runs better. I suggest this because 1) some computers at some times have had trouble running paired vid cards in Sg and 2) it's a quick & easy thing to test.
As another thought, I did some denoising on a 2:39 clip in Ae just using its own built-in denoiser, and it ran s l o w after that until I did a complete render of it. Even then, any change I made and it was back to s l o w motion. When I commented here, I had a couple responses to the effect that denoising is so hardware-intensive that most of the time they left that to the final set of things before exporting.
Hope there's other responses ...
Neil

Direct link to an Episode?

There needs to be an easy, intuitive way for me to directly share an episode with a friend and NOT the entire podcast.
So often I am listening to a podcast and think, "Jim would really like this one" but I have to type in the name and date of the actual episode.
There doesn't seem to be any good reason as to why we cannot do this with one tap. I was really let down to see that the new version didn't address this as it seems pretty obvious. Very rarely do I want to tweet an entire podcast.
In fact, there is not even away to work around this on a mobile device. AT LEAST on a non-mobile I can get the direct link to the episode by going into iTunes.
By the way, I didn't get why people were so up in arms about podcasts being separate from iTunes, until I started listening to podcasts. Bizarre marketing choice guys.

Hi,
You can call the iView directly by using NavigationTarget..
http://myServer:50000/irj/portal?
NavigationTarget=ROLES://portal_content/myFolder/myRole/myIview&NavMode=3
Appending NavMode=3, hides the portal header.
Plz note that the iView you are calling should be part of a Role.
And the PCD location of the iView in the Role must be given for Navigation Target.
Check this URL
http://help.sap.com/saphelp_nw04s/helpdata/en/43/014421d21d6fade10000000a11466f/frameset.htm
Edited by: Santhosh Edla on Feb 24, 2009 5:05 PM

Direct link from Premiere Pro to Speedgrade won't open and stops at the post processing bar.

I've just installed the new version of Speedgrade and every time I try to open a direct link from Premiere Pro to Speedgrade, it opens and starts to load, but when the post processing bar appears it stops there and doesn't open, I've gone back to the original versions of both programmes and that same thing happens, HLEP!

Hi Vinay,
1. I am using third party plug ins, and I understand that might be causing an issue, but I've also tried opening a new project with nothing in it at all, and that won't open.
2. Premiere Pro quits after the project loading bar or after I create a new project.
3. I used a lot of files! mov, mts, psd, ai, png, jpeg, and AE compositions through dynamic link.
4. The project has about five sequences. They range from 1 minute to 4 minutes.
Thanks!

How to use Combobox to direct link

Hi all, how can i use combobox to direct link in adf. For example: I have a list of value with combobox, when i selected "Page A" ---> go to Page A, selected "Page B" ----> go to Page B
Thanks

Hi,
How about using a menu model instead of a combo box? Check out this example : Oracle JDeveloper 11g Release 2 Tutorials - Creating ADF Menus for Page Navigation
-Arun

E-Rec Apply Directly link throwing an error from Int /Ext candidate st.page

Hello,
Iam working on a EREC implementation in an integrated scenario. The TREX installation has not been completed yet but i still wanted to check on the other links which does not use the TREX search engine.
I created a requisition object and succesfully published the job. When trying to use the Apply Directly link in the Internal / External candidate page to apply against the Job posting, I get the below error.
Iam sure "apply directly" does not use TREX unlike Job search. Can someone help me with clues what the below error is all about.
The following error text was processed in the system EC6 : Syntax error in program CL_HRRCF_APPLY_QLIST_V========CP .
The error occurred on the application server ctsgvcsapbl05_EC6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CREATE_PAGE of program CL_BSP_PAGE_BASE==============CP
Thanks
G Raj

Hello,
Iam working on a EREC implementation in an integrated scenario in EC6.0 EP3. The TREX installation has not been completed yet but i still wanted to check on the other links which does not use the TREX search engine.
I created a requisition object and succesfully published the job. When trying to use the Apply Directly link in the Internal / External candidate page to apply against the Job posting, I get the below error.
Iam sure "apply directly" does not use TREX unlike Job search. Can someone help me with clues what the below error is all about.
The following error text was processed in the system EC6 : Syntax error in program CL_HRRCF_APPLY_QLIST_V========CP .
The error occurred on the application server ctsgvcsapbl05_EC6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CREATE_PAGE of program CL_BSP_PAGE_BASE==============CP
When i performed a syntax check on Class CLHRRCF_APPLY_QLIST_V, i get to see the below error description;
+Class CLHRRCF_APPLY_QLIST_V,Method ON_APPLY+_
+Method "GETOPEN_APPLICATIONS" does not exist. There is, however, a+_
+method with the similar name "GETAPPLICATION_STATUS".+_
Application log analysis (SM21) shows the below error description --> Run-time error "OBJECTS_GLOBAL_INTF_NOT_FOUND" occurred_+
Has anyone come across this error. Please help me with some information.
Thanks
G Raj

Direct Link to Detail Navigation Report

Hi, I have a number of reports(IViews) in my Detail Navigation Area. Is there anyway to get a direct link to a specific IView in the Portal?
Thanks!

You might want to read up about iViews and quicklinks, which are basically a named shortcut to an iView... Of course, the user needs to have the iView as one of the iViews in their role before they can launch it with the quicklink.
Cheers

Enquiry about SAP B1 Pl10 administration

I have some enquiry about SAP B1 PL10 which are
1 Can it be integrated with IBM Tivoli software for Application monitoring.
2 Can it be integrated with Active Directory for authorization.
3. Profiles of SAP users can be stored in Accrss Contril List of windows.
4 Audit trail of information access (success and failure) by users can be audit trailed.

1. Check this link : http://service.sap.com/smb/sbo/platforms to know supported software or environment for B1
2. You can use active directory for authorization
3 and 4 are not available but available in the sql server activity management

Cfimage and crop with direct links

Hello,
I need some advice..
I want to have users reference images from my site but only certain sections (IE: http://somedomain.com/getimg.cfm?ID=123&section=1). Below is the code I have but it only outputs a variable like coldfusion.image.Image@174e3a9 rather than the actual image. I understand cfimage has a writeToBrowser action but that outputs html source which wont allow my users to have a direct link.
<cfprocessingdirective suppresswhitespace="yes">
<cfimage source="d:\test.jpg" name="myImage">
<cfset ImageCrop(myImage,0,0,534,474)>
<cfcontent type="image/jpeg" >
<cfoutput>#myImage#</cfoutput>
</cfprocessingdirective>

You can also prevent direct links (although not fool-proof) by checking the HTTP_REFERER at http server level, using mod_write or isapi_rewrite (or similar). You can easily find examples for this by searching the internet.
About cfcontent then... the correct usage would be <cfcontent variable="#myImage#" type="image/jpeg"> , but since cfcontent does not support a ColdFusion image object, but rather variables or binary objects read by cffile, save the cropped image to a disk with the cfimage tag, then read it using cffile.
Better yet, if you are using ColdFusion 9, use the ram://-drive instead of physical disk for less I/O load.
- Fernis - fernis.net - ColdFusion Developer For Hire

Direct Linking

I am trying to directly link to a tab within a course on our Authenticated Side.
In Firefox this seems to work okay. I click on the link within my webpage, it takes me to iTunes, then it directs me to my login page, once I login it takes me to the correct tab with-in iTunesU.
In IE it doesn't work. When I click on the link it takes me to iTunes, and then goes to our error page.
I kind of understand what is going on, I think it has something to do with the session. I know in FF the session is the same in each window. But with IE the session is different for each window. That might explain it.
Here are some links I am talking about:
The Webpage with the Link on it:
http://www.edinboro.edu/departments/hpe/hpepodcast_project/hpe_podcastportal.dot
(The link is "HPE Student iTunes U login").
Our iTunesU Login Page:
http://departments.edinboro.edu/TAC/iTunesU/view_site.pl
Our iTunesU Page: http://cms.edinboro.edu/departments/tac/delta/itunes/index.dot
Any help you can give me on this would be awesome!

Different browsers often conform to standards differently which is often problematic.
Login as the administrator and check the Login URL on the "Edit Site Settings" page. This URL likely includes a "${DESTINATION}" parameter. This parameter is what allows you to get back to the requested page after logging in to the web page.
My guess is that IE is not handling this interaction correctly. You'll need to make sure that the URL returned by your login page is valid for IE.

Enquiry about ACL Direct Link

Similar Messages

Maybe you are looking for