Enquiry about adding new field in SAP transaction vl10c

Hi,
requirement:
I want to add additonal field after executing SAP transaction vl10c.
help me
pooja

Hi,
You acn add extra fields with the help of a screen exit.
Try the following Exits:
V50R_USEREXITS
V50R_USEREXIT_PREPARE
V50R_USEREXIT_TRANSF
Related to the program RVV50R10C.
Regards,
Anji

Similar Messages

Possibility of adding new fields to migo transaction

Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GR

Hi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
or Check SAP Note 339448 - MIGO: settings of table control
2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports).

Add new fields in SAP transaction IW22

Hello,
I want to add 2 new fields in SAP standard transaction IW22. I checked the package for this transaction and it is IWOC. I searched the exits for package IWOC but was not able to find any screen exits for it.
Kindly help me on how I should proceed with it.
Regards,
Parag

Please check these
User exit/ Business Add-in              Description
User exit
IWO10026                                User check on setting status 'Do not perform'
IWO10027                                User exit: Generate user-defined settlement rule
IWOC0001                                Create PM/SM notification: Determine reference object
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
Business Add-in
IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample

Adding new field in Call transaction

Hi,
i need to add a new field which is in flat file to created transaction(vd01) using call transaction method.
pls help me through step by step process
thanks in advance
Barkath

1. Add the field in the file.
2. Fill the BDCDATA table in your program ( find an exact and insert bdcdata record)
perform bdc_field using 'RF02K-LIFNR' ITAB-LIFNR.
Or
Re-record VD01 and create a temporory program and check where exactly you need add the perform to fill bdcdata table.
Regds
Manohar

Adding new fields in SAP ECC 6.0

Hi All,
I have a requirement to add a couple of fields at the item level of ERP Quotation. I would like to know if SAP ECC 6.0 have some tools like EEWB/AET in SAP CRM.
Please suggest a solution..
Any Help/Hint highly appreciated,
Thanks, Sudeep..

Can you please check closely, I actually see 7 more fields in ESSL table in ECC6.0 (108 fields) than in ECC5.0 (101 fields).
Can you list down which fields you are looking for that you think are missing?
I have checked ESLL_PLUS, it seems to be the same in ECC 5.0 and ECC 6.0..
There are two new structures in ECC6.0 ESLL_PEROP_STY and OILESLLDATA which doesnt exist in ECC5.0
Also if you just upgraded recently to ECC 6.0 check SPDD logs.
Also check out SWITCH framework, ESLL_PLUS (ESLL_BOS) may be linked to some new frame work that you did not SWITCH ON... Just a thought.
-- SMA
Edited by: S M A on Oct 19, 2010 10:21 PM

Adding new field in ES55 transaction

Hi experts
1)I have to add new input field in transaction ES55( second screen where address and all other details are coming )to input Business Partener Number .
I tried to do so using user exit I tried all function modules of XES55 function group but couldnt find any exit.
What should I do?
2) My second requirement is as soon as user Input Business Partner No. the address details of that business partener should come here by itself as connection object address details.
Any ideas? What should I do?How can this be done.
Thanks

Hi,
good question - as far as I know, there is no solution to this requirement. BUT usually the business partners are created AFTER the connection object was created and get the address of the connection object...
But anyway, only thing I can think of, check the exists ITOB000* - maybe those are passed ...
Otherwise - just use ECC 6.0 and the enhancement framework.
KR
Uwe

SAP Query - Adding new fields to SAP query

Hi experts,
I got an issue to work on SAP query.
I have Transaction code and need to know the infoset to add additional two fields to the existing output.
Please let me know how to find infoset/ Query for the specfic transaction and how to add fields.
Regards,
Venkata

first check the transaction code given to you.. if it is report transaction (check using SE93), then get the report name for example AQFKTES_SGS_IV==MMIV0003======, then after aQFK,TES_SGS_IV woulbe be your user group and MMIV0003 would be your query. Now go to SQ03 with the user group (you need to check the query areas also which would be Environment---> query areas) because some can be client depended some can be just cross client. and then go to sq01 from user group. It will direct you to the queries of the user group you mentioned in SQ03. Now you should be able to find the query you are looking for. The infoset will also be displayed linked to the query. The infoset can be displayed via SQ02 transaction.
If it is parameter transaction code, you need to check the parameter values to find the query details. Rest of the approach is same as mentioned above.

Adding new custom fields in SAP transaction?

Hi,
System - ECC 6.0
I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
I highly appreciate your help on this.
Thanks.
Rajesh

Hi,
Find the link below which has step by step process of adding custom fields:
goto site saptechnical-tutorials-ExitsBADIs-EEWB
Hope this would be helpfull.
Regards,
Sharath

Adding new custom fields in SAP transaction - PSOBWORK?

Hi,
System - ECC 6.0
I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
I highly appreciate your help on this.
Thanks.
Rajesh

Hi ,
There are options like screen-exits ,badis
the best option would be to find screen exits for the transaction and you code ur logic in the exit and create the screen with your requirement .

Adding new fields from CI Include to Standard SAP Screen

Hi All,
I am enhancing Infotype 0487. I have added new fields to the CI include and created the screen fields in subscreen 0200 with reference to the data dictionary fields. When I test the subscreen alone, the new fields are displaying correctly and F4 help is active. But when I view the whole screen(2000) in PA30, the new field is inactive and I am not able to enter data. Also F4 help option is present for the field but when it is selected, a message 'No Values Found' is displayed. Please suggest some solution.
Thanks in advance
Regards,
Sivasankari
Edited by: Julynila on Oct 7, 2010 10:41 AM

Hi,
This might be the standard transaction, so there is a possibility of adding the fields using the Screen variants using SPRO, get in touch with your functional consultant. there you can copy an existing screen and add the required fields and rename the screen to different number, and in the config this new screen can be added.
Thanks,
Srini.

Adding new fields to assignment block, what are the steps to do this.

CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
Jason

Hi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Question regarding adding new field to an infoset.

Hi all!
Actually i am not a programmer but HR functional, but i need to add an additional field to my infoset.
I wanted to do it myself without ABAPers help.
I have already added new field to an infoset and included a code:
TABLES HRP1000.
SELECT SINGLE short INTO ORG_UNIT_SHORT
FROM hrp1000 WHERE objid = p0001-orgeh.
And it almost works. The thing is, when on the report (sap query) a person have value '00000000' in the p0001-orgeh the report enters value into ORG_UNIT_SHORT from the previous record (of another employee).
How to avoid this? i suppose i have to assign this field an initial value at the begining of the code (how?).. or?? as i said i just try to make first steps in abap programming...

Ok, i have found a solution (clear statement)

Regarding - add a new field in migo transaction

Hai guys,
i need to add one field in MIGO transaction, can u pls tell me the step by step procedure for adding the new field in migo transaction.
Regards,
N.selvamuthukumar.

Hi Selvamuthu,
It is possible using the BADI MB_MIGO_BADI to add Additional tabs in header and/or item as required
MB_MIGO_BADI -> BAdI in MIGO for External Detail Subscreens
See the documentation below...........
With the Business Add-In (BAdI) MB_MIGO_BADI, you can extend the interface of the goods movements transaction ( MIGO) with additional tabstrip controls for the detailed information (detail tabstrips) and header information (header tabstrips). It is possible for an external application
to display an additional detail tabstrip with own subscreen (max. 10 lines) in MIGO
to display an additional header tabstrip with own subscreen (max. 3 lines) in MIGO
The program name, screen number and tab page text can be determined dynamically. Different screens can therefore be controlled according to the mode (for example, change mode, display mode, goods receipt, goods issue).
To read the complete documentation --go to se18 --click on BADI -- enter -- MB_MIGO_BADI----Display
inside click on "DOCUMENTATION" button and there is a complete documentation step by step
in addition to it ...--go to se18 --click on BADI -- enter -- MB_MIGO_BADI----Display ->
on the top menu -> "GOTO" -> sample code -> "Display"
in will get the "methods" tab..see the description
Initialization and Registration of Ext. Detail Screens
PBO of Detail Screen
PAI of Detail Screen
Add / Change a Line (GOITEM)
Delete a Line (GOITEM)
MIGO Reset (Delete All Internal Data)
Post Goods Movement
Check Item Data of Goods Movement
Mode of Transaction MIGO (Action / Reference Document)
Status Information and Header Data
Save Held Data
Load Held Data
Delete Held Data
PBO of Header Screen
PAI of Header Screen
Check Header Data of Goods Movement
Publish Item Data After Processing
sample code is given in these methods..so when we create a custom badi implementation of our own go to the sample code and copy the required code in the corresponding methods as required
double click on the method..for eg:IF_EX_MB_MIGO_BADI~PBO_HEADER in the sample code to see code....in this particular method we can see how method calls an external program and screen to create a new tab in MIGO...use code from mainly the following to get a new header/item tab
PBO of Header Screen
PAI of Header Screen
PBO of Detail Screen
PAI of Detail Screen
Pls take some time to analyse the code or flow but we can have the tabs in the header/item level
Hope it helps
Regards
Byju

CRM PCUI (Imp): Adding new fields & Webpage display in ODC1

Hi Gurus,
Plz help in these PCUI related configurations:
Query 1.
PCUI: Adding custom created field in a new TAB (BSP Iview)
Steps Done
a. Custom field defined in an object (say Opportunity)
b. An event created.
c. A Group Tab Page created
d. A Field group created and a new field name added to the field group (What structure need to be added to this field group?)
e. Entry made in Application Layout for an application i.e. event / position / screen element / tab page / structure. (Again what structure to be added?)
To handle this new field & tab, plz advice
1. What needs to be entered in the screen structure? Do we need to create this structure?
2. The required the model access class defined for the screen structure.
3. Any changes required in the controllers
(Where is the linking between custom field defined in the opportunity object and the new field entry made in the filed group)
Query 2.
Calling a webpage in a tab (ODC1, Detail area)
Opening a webpage in an iview can be done easily by reating a URL iview.
If the requirement is to open a web page in ODC1, than what are the steps required for the same?
e.g. On clicking a user defined tab the webpage should open in the detail area 1.
Query 3.
We have extended an object (say field addition in opportunity header) through EEWB
Will the added filed be available in PCUI screen also?
Regards,
SAURABH

Hello SAURABH,
welcome to the SDN Community. Please do not crosspost:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=66550&messageID=707519">CRM PCUI (Imp): Adding new fields & Webpage display in ODC1</a>.
Regards
Gregor

Enquiry about adding new field in SAP transaction vl10c

Similar Messages

Maybe you are looking for