Enquiry about EM's timezone (working with HPUX EAT-8)

Dear all,
II have encountered an issue of EM's timezone error.
One of my customers is using our EM (12.1.0.2) installed on Linux 5. It is used to monitor a HPUX target. The HPUX’s time zone has been set to “EAT-8”. I understand that the time zone of DB, OS and EM must be matched with the target. So I have set the time zone of DB and OS to “GMT-8” which should match with “EAT-8”. However when I do the software library update in EM, there is error of “Time zone region not found”.. I have double checked the time of DB and OS, and they matched perfectly. If i ignored this error, when I deploy the EM host agent, there is also warning about the timezone.
May I know if anyone knows how to set the timezone when EM working with HPUX EAT-8?
Thanks.
Best Regards,
Bess Chung

To view a list of the time zones you can use, access the supportedtzs.lst file present in the<AGENT_HOME>/sysman/admin directory of the central agent.
For agent deployment refer to the timezone pre-req from this url
http://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#CACJEFJI

Similar Messages

How about a little help working with Gbps Ethernet I/O (embedded and instantiated) and the Zynq SoC?

A new Xilinx TechTip gives you some basics for working with the embedded Gbps Ethernet ports on all Zynq SoCs. This TechTip also applies to additional Gbps Ethernet ports you might instantiate in the Zynq SoC’s programmable logic. (More than one, if you like.) If you’re not familiar with basic Ethernet tools including the Wireshark protocol analyzer and the NetPerf benchmarking utility for Linux, give this one a read.

kglad wrote:
that code should be attached to the first keyframe that contains your flvplayback component.
if you have more than one, you'll need to assign each a different instance name and adjust the code accordingly.
the trace() should be added to your button listener function (openurl).
All right, I think its going to be easy to explain if you please check my image here http://thenewmediastudio.com/roland/example.png
I'm placing the code in the first frame, however, the movie is located in the 2nd frame but is not working, not sure where exactly I should place the code.
And sorry but, that other thing about the trace, didn't understood that one.
Thanks so much!

Can u expalin about slcm, how to work with that, how to import into EP

hi all
i am swapna. plz post the ans if you know.

Swapna,
http://wiki.sdn.sap.com/wiki/display/Community/SAPSLCM-What'sthereinitforIndian+Universities
http://help.sap.com/saphelp_nw04/helpdata/en/6e/73863f06593a17e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/6e/73863f06593a17e10000000a114084/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208d6f1c-6d4b-2c10-29b8-becca31fe467
Thanks
Bala Duvvuri

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

Working with version management and promotion management best practices BO 4.1

Hi Experts
I wondered if anybody knows if there is a document or something about best practices to work with the version management and promotion management in BO 4.1?
Our Environment includes two servers. The first one is our development and test server. The second server is our prod system.
Now on the dev server we have basically two folders called dev and test. We control access to them with a right system based on the folder structure.
My question now is how you would work in this scenario (third server is not an option). Main target is to have as few reports as possible. Therefore we try to work with the version management system and only have one version of each report in the dev folder of the cms. But this is where problems start. Sometimes the newest version is not the version we want to publish to the test folder or even prod server.
How would you publish the report to the other folder? Make a copy of the concerned report (transport to the same system via promotion management is not possible). Also how would you use the version management in regards to the folder structure? Only use version management in dev folder and export reports to test folder (out of vms control) or also use vms in test folder and how would that work?
Further more I’d be interested in learning best practices with promotion management. I found out that the promotion of a report that doesn’t exist in prod doesn’t make any problems. But as soon as an older version already exists there is only partial success and the prod folder gets renamed to “test”.
Any suggestions on how to handle these problems?
Thank you and regards
Lars

Thank you for your answer.
So you are basically proposing to work with the vms in the dev folder and publish the desired version to the test folder. And the test folder is out of version control in this scenario if I understood you correctly (like simple data storage)?
And how would you suggest promoting reports to the prod system? Simply by promoting the
desired version from dev folder directly to prod? This would probably lead to inconsistence because we would need to promote from dev system to test and dev to prod instead of promoting a straight line from dev over test to prod. Furthermore it would not solve the problem of the promoting result itself (A new folder called dev will be generated in prod but the report gets promoted to the prod folder if there was no report before).
Thank you for the link. I came across this page just a few days ago and found also lots
of other tutorials and papers describing the basic promoting process. The promoting process in general is clear to me but I wondered if it is possible to change some parameters to prevent folder renaming for example.
Regards
Lars

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? A

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?

Not sure what plugins you mean, Hornet - Lr doesn't rely on plugins to read new cameras.
If you mean the Adobe Camera Raw (ACR) plugin - that's for Photoshop, not Lightroom. Lr has the same functionality as ACR, but it's hard-coded into the program, so if you're looking for support for a new camera, you need to wait for a new version of Lr.
And nobody here can say when Lr support for a given camera will happen.
Hopefully someone with a Merrill will be able to chime in about whether its files work with the current Lr.

New GE70, killer e2200 working with WIFI but not by cable

Hi!
I bought a GE70 today and noticed that I can connect to the internet through WiFi but not with a network cable.
I've tried to upgrade drivers and such, but it still doesn't work. I've no router in this apartment so I'm using WiFi through my old laptop so I can figure this thing out.
What I've done so far:
1. Installed the drivers on the CD which I got with the computer. Although when on BigFoot LAN Driver, it says that I've already another version installed and need to uninstall it).
2. Downloaded the drivers for the network card through MSI homepage and installed. Funny thing, after that not even the WiFi worked.
3. Tried to unplug the power for the modem and wait a while and then plug it back in but that didn't work either.
4. Figured it might've been something wrong with windows so I did a factory recovery but that didn't seem to help either.
All I get when I plug the cable in, I get the "Limited access" (yellow mark) on the LAN icon down in the right side corner.
Has anyone else gotten this problem?
Kind regards,
W

Quote from: Wingu on 20-May-13, 08:15:26
Thank you for your reply.
I think I've got it sorted now. I tried another network cable and it works now.
It's weird however since the cable I've used for about a month now works with my old computer (Win7) but not with my new computer.
Gonna go to an electronic store later and see if it will make any difference if I buy a new cable.
Does the killer e2200 only accept certain sort of network cables?
Thanks again.
W
It really should work with any network cable to be honest, as long as it's not a PATCH cable. Patch cables are wired slightly differently, but they are rare anymore.

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

Bose Product Support

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I was thinking about buy an 128GB SSD Macbook Pro, will it work with my external hard drive if i plugged it in through USB still?

Well basically I've heard the hype about SSD and i was thinking about buying a mac with a 128GB SSD, but i was wondering, if i plugged in my 320GB external hard drive, would it work with an SSD mac? Or, do i need and internal hard drive for it to be compatible with my external one?

You can replace your internal drive with a SSD and buy an external enclosure for your 320GB from OWC.
No problems.
Clinton

It wont let me log in to my tumblr and my email/password is correct, but it use to work about a week ago. how to i get firefox to work with tumblr?

I just downloaded firefox about a week ago and the first day i used it i went on to tumblr, and i logged in just fine. But now a week later i'm trying to log into my tumblr and it says it's loading but then it goes straight back to the log in page. I contacted tumblr support and they said to check if i have cookies, and i do. i'm very dissappointed that firefox won't work with tumblr.

solution doesn't work for me. i think those firefox developers are either ignorant, incompetent or simply uninterested in solving this problem which has been around at least since 2010 - we're now in 2012.
i've been loyal to firefox for 10+ years but now i gonna switch to chrome, which i have been using in parallel for a while now and which has not given me any headaches. firefox usage worldwide has been in decline since 2011 and i think this trend reflects the disconnect between the developers and their user base since the chrome-like decision was taken to go down the fast upgrade lane. google can pull that off successfully, firefox can't - sadly.

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

Enquiry about EM's timezone (working with HPUX EAT-8)

Similar Messages

Maybe you are looking for