Enquiry in script

Hi,
I have 2 varaible windows window1 and window2 in script...I am trying to populate internal values it_final1 & it_final2...
But the values outputing only the last value in the internal table .
I need all the values in the internal table .
Can anyone help me.
Pooja

Hi pooja,
In general last record is stored in the header of internal table. So better to check the looping of that internal tables and check whether u r refresing the internal table any where before print the data? same for internatable2 also.
Hope this helps you, reply for queries, Shall post you the updates.
Regards.
Kumar. .

Similar Messages

Enquiry(SAP SCRIPTS)

hi experts !
can any one tell me the wat is form name, driver program & t.code for ENQUIRY ? (sap scripts )
or
list of form names and their respective driver programs , Tcodes ?
Regards,
Rajsh
Edited by: rajesh k on Mar 4, 2008 10:59 AM

thanks for Reply !
of course i know that but am not getting the appropriate one..!
am facing the problems like
when i get the form name,, the driver program is not there .
when i know the both but am unable to find the respective tcode for that form ?
can any one pls provide me ?
list of form names with respective driver programs , tcodes ?
Cheers,
Rajsh.

Enquiry in SAP SCRIPT

Hi,
I want to increment the vertical line dynamically according to the line items in SAP SCRIPT.
How will I do it??
Pooja

hi..,
each time u print the record in sap script at the end write &vline&.. give a tab postion for all these vertical lines and use the tab correctly....then onli u will get a straight and complete vertical line...
plz, do remember to close the thread when ur problem is solved !!
reward if it helps u..
sai ramesh

General Script Enquiry

Hi All, new to the idea of scripting here, so please bear with me.
Firstly, is it possible for the Javascripts that would be based in Indesign to work and incorporate other platforms such as Photoshop within the same script? For example I would initiate some kind of automation where I could instruct selected images to be renamed, converted to cmyk and relocated to a final image folder, then Indesign to relink to these newly named images. Is this possible?
Secondly, as I am not in the least bit experienced in Coding , is there not away for the script to record my actions, or is the only real option to train my self up in this new language.
I look forward to a reply
Many Thanks
CJ

Firstly, is it possible for the Javascripts that would be based in
Indesign to work and incorporate other platforms such as Photoshop
within the same script?
Yes, you can do this using BridgeTalk — communicating from InDesign with Photoshop, Illustrator, Bridge. Here is an example of such script: http://www.kasyan.ho.com.ua/resize.html
Secondly, as I am not in the least bit experienced in Coding , is
there not away for the script to record my actions, or is the only real
option to train my self up in this new language.
No, you can't record your actions in InDesign like in Photoshop. However, you can record the Photoshop's part of the code using script listener and use it in your script. I think you have two choices:
Start learning scripting yourself (Warning! This is not for faint hearted ).
Hire a professional scripter.
Kasyan

In which table scripts and smartforms are stored

in which tables scripts and smartforms are stored
eg scripts in tadir.

Hi this may be of some help.
SD
SALES ORDER/ENQUIRY/QUOTATION
Output type         : BA00
ScriptForm Name     : RVORDER01
Driver Program Name : RVADOR01
smartform name
DELIVERY NOTE
Output type         : LD00
ScriptForm Name     : RVDELNOTE
Driver Program Name : RVADDN01
smartform name      : LE_SHP_DELNOTE
Smartform Driver Pgm: RLE_DELNOTE
INVOICE
Output type         : RD00
ScriptForm Name     : RVINVOICE01
Driver Program Name : RVADIN01
smartform name      : LB_BIL_INVOICE
Smartform Driver Pgm: RLB_INVOICE
MM
PUCHASE ORDER/RFQ/CONTRACT
Output type         : NEU
ScriptForm Name     : MEDRUCK
Driver Program Name : SAPMF06P
smartform name      : /SMB40/MMPO_L
smartform driver program: /SMB40/FM06P
GOODS RECEIPT
Output type         : WE01
ScriptForm Name     : WESCHEINVERS1
smartform name      : /SMB40/MMGR1_A
smartform driver program: /SMB40/M07DR
GOODS ISSUE
Output type         : WA01
ScriptForm Name     : WA_SCHEINVERS1
smartform name      : /SMB40/MMGI1_A
smartform driver program: /SMB40/M07DR
FI Forms
Account Statement   : F140_ACC_STAT_01
Cheque Printing     : F110_PRENUM_CHEK
Balance Confirmation: F130_confirm_01
Dunning Form:         F150_DUNN_01
check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
SMARTFORMS -Driver Program
PO: /SMB40/FM06P
SO: /SMB40/RVADOR01
GR: /SMB40/M07DR
with regards,
Hema Sundara.
pls give points if u find this helpful.

I;m no longer able to use the Penn State ANGEL system (I teach on line) for my email and intead get messages about "script" problems.

Question
I'm no longer able to use the Penn State ANGEL system (I teach on line) for my email and instead get messages about "script" problems

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Fetching Enquiry date in RFQ sapscript

Hi all,
I need to fetch Enquiry date in my customized standard sap script form .The field name is ANFDT and it is declared in structure RM06E.Please let me know hoe to do it.
Thanks
Manu

Hi
check this Table/Filed EKKO-ANGDT
In EKKO Table you will get RFQ Data.And you need to check the document category and type to A and AN respecitvely.
Ranga

How to delete the members in one dimension use the maxl script

i have question that i want to delete the members in one dimension useing the maxl script, but i do not know how to do it. can the maxl delete the members in one dimension? if can, please provide an sample script, thank you so mcuh.

MaxL does not have commands to alter an outline directly, except the reset command which can delete all dimensions but not members selectively. The best you could do would be to run a rules file (import dimensions) using a file that contains the members you want to keepload rule for the dimension. As typical the warning is to test this first before you do it on a production database

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

If statement in Custom Calculation Script

I have 16 fields and if even one of them ="1" I have to list it in another field. I do not want to count or sum. If one of those fields has a 1 in it I just want the other field to display Y and if none have a 1 I want that field to display N.
Please help.
Thank you in advance~mjc

You need to write a compound logical statement to evaluate all of the values and that statement needs to evaluate to true or false.
Do you know how to write JavaScript?
Do you know how to enter JavaScript calculations into a form field?
For custom calculation of the text field I could write something like:
// define an array of the field names to check
var aNames = new Array("Text1", "Text2", "Text3", "Text4",
"Text5", "Text6", "Text7", "Text8",
"Text9", "Text10", "Text11", "Text12",
"Text13", "Text14", "Text15", "Text16");
// define a logical variable that is true if any field has a value of 1 - default is false or no field has a value of 1
var bMatch = false;
// value for text field
var TextValue = 0;
// logical value of field being equal to 1 test
var FieldIs1 = false;
// loop through all the fields and test the fields value
for(i = 0; i < aNames.length; i++) {
// logically OR the result of field i value equal to true with bMatch
// get the value of field
TextValue = this.getField( aNames[i] ).value;
// test the value of the field
FieldIs1 = Number(TextValue) == 1
// logically OR the 2 values
bMatch = FieldIs1 | bMatch;
} // end field processing
// set the field value
if(bMatch == true) {
event.value = "Y";
} else {
event.value = "N";
You will need to change the field names to match your fields. You can add more field name or remove field names as needed and the script will adjust for the number of field names.

If Statement in SAP Scripts

Hi All,
I have written the below If statement in SAP scripts but when i execute the same the controll doent check the second line entries. If firtst line doesnot satisfy it goes to the else part. Kindly suggest what is wrong in this..
/:           IF &T156T-BWART& = '321' OR &T156T-BWART& = '322' OR
/:           &T156T-BWART& = '349' OR &T156T-BWART& = '350' OR
/:           &T156T-BWART& = '312' OR &T156T-BWART& = '326' OR
/:           &T156T-BWART& = '343' OR &T156T-BWART& = '344'.
/:           ELSE
/:           ENDIF.

Hi neha,
Try to use the '/E' fo rnext line
/E->Extended line
Here is a code:
/: IF &T156T-BWART& = '321' OR &T156T-BWART& = '322' OR
/E &T156T-BWART& = '349' OR &T156T-BWART& = '350' OR
/E &T156T-BWART& = '312' OR &T156T-BWART& = '326' OR
/E &T156T-BWART& = '343' OR &T156T-BWART& = '344'.
/: ELSE
/: ENDIF.
Hope this helps you.
Regards,
Rajani

Installation Problem on 11g, RHEL 5 - Unable to generate temporary script

Hello all,
This is for the first time i am encountering this kind of error on 11g. Half way through installation i get this error.
All parameters set correct, used the official installation technique (works fine previously), except for this time i am getting a weird error, which does not allow me to continue with the installation.
Please help.
Environment
Oracle 11g
RHEL 5
Error on GUI -
OUI-10053: Unable to generate temporary script: {0}. Unable to continue install
Error on command prompt -
OUI-10053:Unable to generate temporary script: /u01/app/oraInventory/orainstRoot.sh. Unable to continue install.
Help appreciated.
Thanks

Hi Monu Koshy
Can you please control the user rights and also the df ?
ls -al /u01/app/oraInventory/
df -h /u01/app/oraInventory/
Regards,
Hub

SAMPLE RECEIVING OPEN INTERFACE SCRIPT(ROI 이용자를 위한 SCRIPT)

제품: MFG_PO
작성날짜 : 2006-05-11
SAMPLE RECEIVING OPEN INTERFACE SCRIPT(ROI 이용자를 위한 SCRIPT)
================================================================
PURPOSE
Receiving Open Interface(ROI)를 좀더 쉽게 사용할 수 있도록 만들어진
tool이라고 할 수 있다. 이 script를 이용을 통해 user는 PO no, user id,
Org id를 입력하면 script는 PO에서 최소한의 data를 가져와 receiving
transaction을 생성하기 위해 ROI에 data를 입력한다.
Receiving Transaction Processor는 insert 된 data를 실행한다.
Explanation
Instructions:
1.Script exroi.sql을 local computer에 copy 하거나 sqlplus 환경의 text
edior에 script 내용을 cut&paste 한다.
2.사용가능한 PO no, User id, Org id를 결정한다.
3.sqlplus prompt에서 아래와 같이 입력한다.
SQL> @ezroi.sql
4.PO no, User id, Org id를 입력하라는 prompt를 볼 수 있을 것이다.
5.exroi.sql script를 관련된 PO data를 가져와 rcv_headers_interface 및
rcv_transactions_interface tables에 insert 한다.
만일 PO shipment lind이 closed, cancelled, fully received 되었다면
ROI table에 data를 insert 하지 않는다.
Note: 이 script가 data를 validate 하진 않으며,ROI API 자체 validation
이 실행될 뿐이다.
6.Script가 끝나면 Receiving Transaction Processor를 실행하여 insert 된
lines을 처리할 수 있다. Transaction Status Summary 화면을 통해 실행된
line이 pending 인지 error 상태인지 확인할 수 있다.
Notes:
1.Org_id parameter 값을 찾는법:
a) Application에 접속, Help> Diagnostics> Examine으로 이동.
Block:$Profile$, Field: ORG_ID 를 선택한다.
b) ORG_ID 값을 note 해 놓고 ORG_ID prompt시 이 값을 입력한다.
2.User_Name parameter 값을 찾는법:
a) Application에 접속, Help> Diagnostics> Examine으로 이동.
Block:$Profile$, Field: USER_NAME 를 선택한다.
b) USER_NAME 값을 note 해 놓고 USER_NAME prompt시 이 값을 입력한다.
Example
"eZROI.sql' script...
--*** eZROI ***
--*** by ***
--*** Preston D. Davenport ***
--*** Oracle Premium Applications Support ***
--*** Oracle Worldwide Global Support Services ***
--*** Date: 23-JUL-2003 - Beta release ***
--*** Date: 09-SEP-2003 - Rev A Added multi- ***
--*** shipment line capability ***
--*** Parameters: ***
--*** ORG_ID Organization ID ***
--*** USER_NAME FND User Name ***
--*** PO_NUMBER Purchase Order Number ***
--*** This script intended for a standard Purchase ***
--*** Order document to be inserted into the Oracle ***
--*** Receiving Open Interface (ROI) via the standard ***
--*** Oracle open interface api for a simple Receive ***
--*** transaction. ***
--*** Note: This script only considers open Purchase ***
--*** Orders. This script will not allow over- ***
--*** receipt, cancelled or closed PO's to be ***
--*** inserted into the ROI and received ***
CLEAR BUFFER
SET VERIFY OFF
SET LINESIZE 140
SET PAGESIZE 60
SET ARRAYSIZE 1
SET SERVEROUTPUT ON SIZE 100000
SET FEEDBACK OFF
SET ECHO OFF
DECLARE
X_USER_ID NUMBER;
X_PO_HEADER_ID NUMBER;
X_VENDOR_ID NUMBER;
X_SEGMENT1 NUMBER;
X_ORG_ID NUMBER;
X_LINE_NUM NUMBER;
BEGIN
DBMS_OUTPUT.PUT_LINE('***ezROI RCV API Insert Script***');
SELECT PO_HEADER_ID , VENDOR_ID , SEGMENT1 , ORG_ID
INTO X_PO_HEADER_ID , X_VENDOR_ID , X_SEGMENT1 , X_ORG_ID
FROM PO_HEADERS_ALL
WHERE SEGMENT1 = '&PO_NUMBER'
AND ORG_ID = &ORG_ID;
SELECT USER_ID INTO X_USER_ID
FROM FND_USER
WHERE USER_NAME = UPPER('&USER_NAME');
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID ,
GROUP_ID ,
PROCESSING_STATUS_CODE ,
RECEIPT_SOURCE_CODE ,
TRANSACTION_TYPE ,
LAST_UPDATE_DATE ,
LAST_UPDATED_BY ,
LAST_UPDATE_LOGIN ,
VENDOR_ID ,
EXPECTED_RECEIPT_DATE ,
VALIDATION_FLAG
SELECT
RCV_HEADERS_INTERFACE_S.NEXTVAL ,
RCV_INTERFACE_GROUPS_S.NEXTVAL ,
'PENDING' ,
'VENDOR' ,
'NEW' ,
SYSDATE ,
X_USER_ID ,
0 ,
X_VENDOR_ID ,
SYSDATE ,
'Y'
FROM DUAL;
DECLARE
CURSOR PO_LINE IS
SELECT PL.ITEM_ID , PL.PO_LINE_ID , PL.LINE_NUM ,
PLL.QUANTITY , PL.UNIT_MEAS_LOOKUP_CODE ,
MP.ORGANIZATION_CODE , PLL.LINE_LOCATION_ID ,
PLL.CLOSED_CODE , PLL.QUANTITY_RECEIVED ,
PLL.CANCEL_FLAG, PLL.SHIPMENT_NUM
FROM PO_LINES_ALL PL ,
PO_LINE_LOCATIONS_ALL PLL ,
MTL_PARAMETERS MP
WHERE PL.PO_HEADER_ID = X_PO_HEADER_ID
AND PL.PO_LINE_ID = PLL.PO_LINE_ID
AND PLL.SHIP_TO_ORGANIZATION_ID = MP.ORGANIZATION_ID;
BEGIN
FOR CURSOR1 IN PO_LINE LOOP
IF CURSOR1.CLOSED_CODE IN ('APPROVED','OPEN')
AND CURSOR1.QUANTITY_RECEIVED < CURSOR1.QUANTITY
AND NVL(CURSOR1.CANCEL_FLAG,'N') = 'N'
THEN
INSERT INTO RCV_TRANSACTIONS_INTERFACE
INTERFACE_TRANSACTION_ID ,
GROUP_ID ,
LAST_UPDATE_DATE ,
LAST_UPDATED_BY ,
CREATION_DATE ,
CREATED_BY ,
LAST_UPDATE_LOGIN ,
TRANSACTION_TYPE ,
TRANSACTION_DATE ,
PROCESSING_STATUS_CODE ,
PROCESSING_MODE_CODE ,
TRANSACTION_STATUS_CODE ,
PO_LINE_ID ,
ITEM_ID ,
QUANTITY ,
UNIT_OF_MEASURE ,
PO_LINE_LOCATION_ID ,
AUTO_TRANSACT_CODE ,
RECEIPT_SOURCE_CODE ,
TO_ORGANIZATION_CODE ,
SOURCE_DOCUMENT_CODE ,
DOCUMENT_NUM ,
HEADER_INTERFACE_ID ,
VALIDATION_FLAG
SELECT
RCV_TRANSACTIONS_INTERFACE_S.NEXTVAL ,
RCV_INTERFACE_GROUPS_S.CURRVAL ,
SYSDATE ,
X_USER_ID ,
SYSDATE ,
X_USER_ID ,
0 ,
'RECEIVE' ,
SYSDATE ,
'PENDING' ,
'BATCH' ,
'PENDING' ,
CURSOR1.PO_LINE_ID ,
CURSOR1.ITEM_ID ,
CURSOR1.QUANTITY ,
CURSOR1.UNIT_MEAS_LOOKUP_CODE ,
CURSOR1.LINE_LOCATION_ID ,
'RECEIVE' ,
'VENDOR' ,
CURSOR1.ORGANIZATION_CODE ,
'PO' ,
X_SEGMENT1 ,
RCV_HEADERS_INTERFACE_S.CURRVAL ,
'Y'
FROM DUAL;
DBMS_OUTPUT.PUT_LINE('PO line: '||CURSOR1.LINE_NUM||' Shipment: '||CURSOR1.SHIPMENT_NUM||' has been inserted into ROI.');
ELSE
DBMS_OUTPUT.PUT_LINE('PO line '||CURSOR1.LINE_NUM||' is either closed, cancelled, received.');
END IF;
END LOOP;
DBMS_OUTPUT.PUT_LINE('*** ezROI COMPLETE - End ***');
END;
COMMIT;
END;
SET VERIFY ON
Reference Documents
Note 245334.1

I have the same problem on ESXI 5.5 for over a month now, tried the patches, tried the LTS kernel which others say results in an immediate result without patches, nothing seems to work and nobody seems to be able to offer a solution.
Did you make any progress ??
Error! Build of vmblock.ko failed for: 3.10.25-1-lts (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/open-vm-tools/2013.09.16/build/ for more information.
make[2]: *** No rule to make target '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/linux/inode', needed by '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/vmblock.o'. Stop.
Makefile:1224: recipe for target '_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock' failed
make[1]: *** [_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock] Error 2
make[1]: Leaving directory '/usr/src/linux-3.10.25-1-lts'
Makefile:120: recipe for target 'vmblock.ko' failed
Last edited by crankshaft (2014-01-10 11:32:32)

Pluginspage is not working in embed script in firefox 36 version. Actually wanna downlaod jre 1.8 . It was working on firefox 22 version. Please suggest

<pre><nowiki>function createEmbed(divID, context, locale, server,client)
var d = document.getElementById(divID);
d.innerHTML = '<EMBED type="application/x-java-applet;version=1.8" CODE="com.cybertrust.webrao.WebRAOApplet.class"'+
'JAVA_CODEBASE="'+context+'" '+
'ARCHIVE="WebRAO.jar" '+
'NAME="WebRAOApplet" '+
'MAYSCRIPT="true" '+
'pluginspage="http://javadl.sun.com/webapps/download/GetFile/1.8.0_31-b13/windows-i586/xpiinstall.exe"'+
'L="'+locale+'" ' +
'PinTimeout="'+server+'"'+
'ClientTimeout="'+client+'"'+
'separate_jvm="true"'+
'java_version="1.8.0_31" />';
}</nowiki></pre>
We are using the above script. Defined the application/x-java-applet;version=1.8 So. as per the oracle documentation, Firefox has to check whether java version 1.8 or above is available and then run the applet thereby opening the run window and finally the applet window has to open. So the expectation is if 1.8 jre is not available it has to trigger the pluginspage attribute thereby redirecting to the jre autodownload url mentioned in pluginspage. This code use to work for firefox 21. Not sure why it will not work with any of the versions above 21. Right now we are trying with firefox 36. The same code works with IE 11 also. Please suggest is there any solution for the same.

There are some updates happening to [https://www.mozilla.org/en-US/plugincheck/]
However to further investigate I would suggest troubleshooting the installation of Java:
*[http://kb.mozillazine.org/Java#Java_Deployment_Toolkit_plugin]
*[https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems]
Or also checking with Mozillazine or stackoverflow.com for compatibility and development troubleshooting is a good place to also look.

Questions on scripts, tables & transfer objects between clients.

1. In script, how to use the same print program for two different layouts? with procedure.!
2. Why cant sapscripts be client independent.?
3. Want to maintain a table in dev server and if i update the data, it should simultanously update in Quality and Production servers. How? please explain in details.
4. How to transfer object between clients.? explain.
Points will be promptly rewarded for HELPFULL answers.!

Hi!
3. With SE01, you can create a transport request for all table entries.
SE01 - Create button - Workbench request - Give description and save
Select the created request and click on Display object list.
Click on Display - Change button
Insert line button
ProgID: R3TR
Object: TABU
Object name: Z_YOUR_TABLE
Double click on the table name
Insert line
Key: *
Save everything
Release the transport in SE10 transaction and transport with STMS transaction.
Regards
Tamá

Enquiry in script

Similar Messages

Maybe you are looking for