Enquiry on Master data

Hi All,
I am loading master data BI7 from 0fund_pu_attr(info pack) to (DTP)0fund.........records are 90...........till yesterday
Today users addes 5 more new records at r/3 side......so total now is 95.....how do i update at bw side?
and also to load the data.........do i need to delete the previous requests at info pack and dtp and reload again or is there any other way i could do it?
Any deltas possibe?
Regards,
Raj

Hi Raj,
See whenever the data is added at r/3 side the data doesnot get loaded automatically. We need to load the data from our system. I.e through infopackage.
Now since you are loading master data then its always good to do a full upload if the number of records are not very huge. So you can just run the infopackage without deleting any of the previous request.
You can automate this process of loading the data through Process Chain.
Datasource creation and replication is always one time activity. No need to replicate datasource once again if you just want to load the data.
If by any chance if you have added some new field or deleted any field from your datasource than in that case you need to replicate the datasource again.
hope this helps.
Rgds,
Anup

Similar Messages

BP master data ship to address show in SO

Dear All,
In the BP master data, there is a Addresses tab, inside this tab, there is the Ship to address with Address Name, Zip Code, State... etc.
In the Sales Order, there is a Logistic tab, in the Ship to, user can select which address want to be selected for the default ship to address, in the textbox of the ship to address, would like to enquiry how to set which line of Ship to address can set in here? for example, i just want to display the Address Name and State, but not the Zip Code.
Thank you very much!

Hi!
It's very much possible.
Do the setting in
Administration > setup > Business Partner > Address Format
1. Go to Find Mode
2. Press *
3. Select your Country code
4. Change the Address Format as you wish.
5. Restart SAP Once Again.
--- See to that all other users are logged out from SAP B1

Master Data Object

Hi Gurus, I am required to add the grant to the AR cube along with it's associated master data. This is first time for me, so please provide step by step guidance and I will assigned full points.
Am I to create Multiprovider?
Thnx.
Message was edited by:
Toja

Hi Toja,
please specify with more detail what does "to add the grant to the AR cube along with it's associated master data" mean?
Do you need to activated and load the AR cube along with its master data IObj??
If yes, start analyzing the business content in this area and identify which objects are required and to be activated.
Then analyze the gap btw your req and your business requirement.
Finally activate the content and implement the gap.
hope this helps even if I am unsure about your enquiry....
Olivier.

Pp master data in BW

Hello,
This question might sound silly, yet I am desperate, I'm new both in PP and I don't know BW.
I'm frequently being asked to develop new reports containing data about the BOM or routing cards. We're going to use the BW content 7.0 in a couple of months, so I would like to know wether there is a cube\ InfoSet\ ODS or Query that we can use instead of developing new transactions and reports. I would be very greatful for any information.
Thanks, Eti

Hi,
I would strongly suggest that you do not use BW for this type of enquiry.
many people make the mistake of using BW for reports that should be extracted and produced directly within R3.
A basic rule is as follows,
If you want to report on master dat or transdactional data then use R3. If you want management reports that are of a high level then use BW.
There is no hard and fast rule or guideline but I believe that if you are a senior manager then you will use BW frequently for management type reports and occasionalyy use R3. If you are a director or head of an organisation you would normally use BW and hardly ever need to use R3. Any levels below this would normally use R3 and very rarely need to use BW.
I know that this is a very broad statement and I am nto suggesting that this is a recommendation, it is just that if you use BW for reports that should be run in R3, not only can you not get to the lowest level of detail (to verify the figures or look for a specific record (order etc), but often the data in BW can be misleading if not wrong.
The reason why data in BW is often wrong is that it is extracted from R3 OK but in R3 there are often many fields that hold the data etc. and unless you choose exactly the right fields the data is wrong.
An example is the stock figures. If you extract the stock figures to BW which stock fields do you extract? the unrestricted stock, the blocked stock, stock in transit, stock in transfer 9not the same as in transit). Was 103 blocked stock overlooked etc. It is not as easy as it seems to get the data right in BW.
For Purchase orders what qty and value do you use? What if there are schedules against the PO, what about deletion flags, release strategies, service order POs (the data is held differently in ESM POs), etc. etc.
This is why I maintain that the only data reporting that should be done in BW is high level figures such as "sales order values", PO commitments etc.
So I would not recommend using BW for reports concerning BOMS or Routings etc. this is just too low level for it to be worthwhile or accurate.
Just my opinion and one which I am sure will be challenged
Just for information I am certified in BW as well as MM so this is not just a one-sided view.
Steve B

Can not find master data in the cube

ItemNo is an navigation attribute of 0Material. We are using 0material in a cube. When I display the cube data include ItemNo, I don't find the data I am looking for. For example:
In 0Material:
0Material      ItemNo    Description
AAA                001           Test
BBB                002           Test
In the cube I expect to see:
0Material             ItemNo            On Hand Qty
AAA                      001                      1000
BBB                      002                       2000
Instead I saw:
0Material             ItemNo            On Hand Qty
AAA                                                1000
BBB                                                2000
0Material got refreshed after cube data got loaded. Is that why I don't find the refreshed Master data?
Thank you!

Hi,
When you laod the cube, the Values for Master are automatically get created in the master data (If they are not present earlier and with "Data Update Type in the Data Tragets" setting in InfoPackage).
Now when you are loading your cube with 0Material and Item Number, the values for Item Number seems blank. Thats the reason why you are not able to see the Item Number in Cube though it is present in Master. Because now these are two different keys, one with Item Number value and other without Item Number value.
Regards,
Yogesh.

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Creation of Assets master Data

Dear All,
Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ? In UNBW mat type there is no sales views maintained.
pls exp me
regds,
Channa

hi,
Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
Regards
Priyanka.P

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Automatic PO creation from PR with no master data

Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.

Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale

Steps to prepare and upload legacy master data excel files into SAP?

Hi abap experts,
We have brand new installed ECC system somehow configured but with no master or transaction data loaded .It is new empty system....We also have some legacy data in excel files...We want to start loading some data into the SAP sandbox step by step and to see how they work...test some transactions see if the loaded data are good etc initial tests.
Few questions here are raised:
-Can someone tell me what is the process of loading this data into SAP system?
-Should this excel file must me reworked prepared somehow(fields, columns etc) in order to be ready for upload to SAP??
-Users asked me how to prepared their legacy excel files so they can be ready in SAP format for upload.?Is this an abaper job or it is a functional guy job?
-Or should the excel files be converted to .txt files and then imported to SAP?Does it really make some difference if files are in excel or .txt format?
-Should the Abaper determine the structure of those excel file(to be ready for upload ) and if yes, what are the technical rules here ?
-What tools should be used for this initial data loads? CATT , Lsmw , batch input or something else?
-At which point we should test the data?I guess after the initial load?
-What tools are used in all steps before...
-If someone can provide me with step by step scenario or guide of loading some kind of initial master data - from .xls file alignment to the real upload - this will be great..
You can email me some upload guide or some excel/txt file examples and screenshots documents to excersize....
Your help is appreciated it.!
Jon

hi,
excel sheet uploading:
http://www.sap-img.com/abap/upload-direct-excel.htm
http://www.sap-img.com/abap/excel_upload_alternative-kcd-excel-ole-to-int-convert.htm
http://www.sapdevelopment.co.uk/file/file_upexcel.htm
http://www.sapdevelopment.co.uk/ms/mshome.htm

Enquiry on Master data

Similar Messages

Maybe you are looking for