Enregistrement de données du DAQ vers windows
Bonjour,
Comment est - il possible d'enregistrer les données acquises par le DAQ dans un fichier texte sur Windows lorsque la cible d'execution est le DAQ ?
Merci d'avance.
Hello,
How is it possible to record the data acquired by the DAQ in a file text on Windows when the target of execution is the DAQ?
Thank you in advance.
Bonjour,
Votre question semble être la suivante:
Comment enregistrer des données dans un fichier texte lorsque la cible d'exécution est une cible temps réelle embarquée et que les acquisitions DAQ se font sur cette cible? Autrement dit, comment rapatrier les fichiers de données sur le PC Host (sous Windows)?
Lorsque vous utilisez des VIs d'E/S sur fichiers pour générer des fichiers dans une application LabVIEW, les fichiers sont stockés sur le disque de la cible d'exécution.
Pour les cibles RT (Module FieldPoint FP-20xx ou contrôleur PXI), l'espace mémoire est sous forme d'un disque dur ou d'une CompactFlash.
Pour transférer les fichiers de la cible sur le PC Host (la cible RT étant connectée au PC Host par une liaison Ethernet), on utilise le transfer
t FTP.
Un serveur FTP est intégré dans toutes les cibles RT NI. Il suffit alors d'ouvrir un client FTP sur le PC Host (par exemple, Internet Explorer) puis de tapez l'adresse suivante: ftp://adresse_IP_cible_RT pour visualiser le contenu de la mémoire de la cible.
Vous pourrez ensuite transférer (downloader) les fichiers stockés dans la cible pour les utiliser sous Windows.
Un lien expliquant plus clairement le principe:
FTP with LabVIEW Real-Time
http://zone.ni.com/devzone/conceptd.nsf/webmain/F1BDA61C2F9DDA40862568EB006EFA51?opendocument
Bonne continuation.
Matthieu Gourssies
National Instruments
Similar Messages
-
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
-
I DON'T want a new window!!!
I want to open a link in a new tab - I DON'T want a new window, even if the page specifies a width or height. I can't believe that FF would try to think for me and override MY prefs - I though that stupidity was left to MS! Even Safari 4 (4.1.2) gives me the option to always open in a new tab no matter what. A web site doesn't deserve to take over my browser, and any good site will be designed or programmed to handle any width/height.
Any way to hack this setting? Or do we wait and hope that FF returns control to the user?You can check these prefs on the about:config page.
* http://kb.mozillazine.org/browser.link.open_newwindow (3)
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)
See also:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings -
HT1864 Can I still use iCloud if I don't have Vista or Windows 7? I have XP.
Can I still use iCloud if I don't have Vista or Windows 7? I only have XP on my computer.
Yes, using iCloud does not require installing anything on your computer.
If you want to use the features of iCloud that do involve loading the iCloud Control Panel on the computer then you will need to either upgrade the OS on the computer or buy a new computer. -
Hi all,
I use the device DAQ USB-6341 to generate the desired voltage waveform by the "finite samples" sample mode.
I notice that the channel resets to zero volts after the DAQmx task is done and the DAQ USB-6341 does not have
the property AO.idleOutputBehavior to select "Maintain Existing Value".
How can I maintain the last AO value after the DAQmx task is done on device DAQ USB-6341 ?
Thanks.
GodelHow many computers do you have in the network?
What is the IP address and default gateway number on your computer?
In order to connect to the wireless network, WVC80N should get valid IP address from the access point.
If the access point has capacity to assign a private IP address to the computers and devices then I think you can use WVC80N. -
Migration de Photoshop 4.0 vers Windows 8.1
J'ai 5000 photos sous Adobe Photoshop Elements 4.0 en Windows XP. Je migre maintenant vers Windows 8.1
Le catalogue de Photoshop 4.0 n'est pas compatible avec le catalogue de Photoshop 13 qui tourne sous Windows 8.1.
Je ne peux donc pas migrer vers une version récente de Photoshop.
Je ne suis pas non plus parvenu à faire tourner Photoshop 4.0 en "Mode Compatibilité Windows XP" Le support de Microsoft me revoie vers Adobe.
Comment puisje accéder à mes photos en Windows 8.1?Voir:
https://helpx.adobe.com/elements-organizer/kb/convert-organizer-catalog-elements-13-64.htm l
Il faut télécharger le programme de conversion et suivre les indications de cette note technique. -
I can't download any trial version because they don't appear in App window on Creative Cloud. Why?
Viquig75856034 which application are you wishing to install? If the computer does not meet the minimum system requirements then it will not be listed for installation. You can find a list of the system requirements at System requirements | Creative Cloud.
-
Enregistrement des données en format fichier .SSN (Atlas mclaren)
Bonjour,
Je vais essayer de détailler au maximum mon problème, en espérant trouver une solution.
Je vais développer une application LabView qui récupère des données d'un bus CAN et enregistre ces données dans un fichier de type ".ssn" (un fichier spécial pour ATLAS mclaren).
Data bus CAN => LabVIEW APP => .SSN file => Lecture avec ATLAS
La boite a déjà fait une application pour un objectif différent mais le même principe et avec du C# au lieu de LabVIEW. Et comme je ne connais rien du tout en C#, j'ai proposé de le faire avec LabVIEW.
Bref, j'ai l'API de ATLAS (un ensemble de fichiers DLL) et je souhaite trouver un exemple de code LabVIEW qui utilise une API tiers pour générer des fichiers. L'utilisation du code de génération de fichier .ssn en C# est envisageable aussi.
Je reste à votre dispositions pour plus d'information.
Merci d'avance,Blue_Strike,
I do not know how you would use that API in particular but if you are looking for how to call the C# code you have in LabVIEW you will need to use the constructor node.
http://zone.ni.com/reference/en-XX/help/371361L-01/lvcomm/constructor_node/
There is an example of this you can find by going to Help > Find Examples in LabVIEW. I would look at "Calling a Private .NET Assembly.vi" under Communicating with External Applications > .NET first.
Matt J
Professional Googler and Kudo Addict
National Instruments -
i do not know what i have done but since yesterday every window i open in firefox shows up in basic html format
hello, please go through the steps covered in [[Websites look wrong or appear differently than they should]] - they contain the most common solutions for the issue you've described...
-
Comment enregistrer des données à l'aide d'un bouton?
Bonjour,
Je souhaiterais pouvoir enregistrer les données que je récupère via une carte NI. Il faudrait que l'enregistrement débute seulement quand j'appuis sur un bouton. Pour l'instant j'ai réussi à enregistrer lors de l'éxécution du programme.
Merci d'avance pour vos réponses.Bonjour,
Regardes dans les exemples NI comment fonctionnent les boucles évenements, cela pourra t'aider ! (Dialog Using Events.vi)
Vincent -
Comment enregistrer les données.
Bonsoir,
je vous prie de m'aider pour resoudre deux problemes que j'ai recontré en voulant automatiser un impedance-metre de type HP 4192A :
1/ Le VI "measure" fonctionne trés bien, mais le SEEP.VI (balayage des frequences) ne fonctionne pas pourquoi?
la face avant indique que le VI est occupé mais il n'y'a pas de variation sur l'instrument.
2/ Ou dois-je mettre éxactement le VI "ECRIRE DANS FICHIER DE MESURE" dans le synoptique pour que je
puisse enregistrer mes données?
Merci d'avance et bon courage.
Résolu !
Accéder à la solution.
Pièces jointes :
HP4192A.LLB 116 KBJe regardais juste par rapport aux drivers disponibles
sur la page suivante il y a des mise a jours pour differentes versions
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E923F659CE034080020E748...
a voir si ça peut solutioner le probleme
@+
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte -
Enregistrer les données d'un graphe dans un fichier
Bonjour,
Je suis débutant dans LabView et j'aurais voulu savoir comment je pourrai faire pour enregistrer des données que je visualise sur un graphe dans un fichier binaire par exemple avec sa date et son heure ?
Merci d'avance pour les future reponse.Alors j'ai fais comme tu m'avais dis mais le probleme c'est que dans le fichier binaire je ne voi ni la date ni l'heure et des truc bizaree et pas binaire....
Voila mon cablage et ce que j'obtient :
Fichier Binaire :
d ºp ºð ¹ ºÈ ¹ ºp º » ºp @Ÿ&€ºp ºÈ ºÈ º º @Ÿ ¹ º ºÈ 9 @žô€º ºp º ºÈ º º ºp º ºp º º ºp ¹ » º ºp @Ÿ €º » º ºð º º ºp ºp º º º ºÈ ºp ºÈ ºð ºÈ » 9 ºð º ºð ºp º @Ÿ ¹ ºp º º º @Ÿ €º ºp º ºÈ º ºp @Ÿ ºp º ºÈ ¹ º @žò ºð º º ºð º º ºð ºÈ ºp º ºp º ºp º ºp
Merci de ta patience eet de tes reponse -
I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it on my mac for copying files on my passport? I don wanna use it on windows again.
If you're not going to use the drive on a Windows machine, you should use Disk Utility (Applications>Utilities folder) to erase the drive and format it as "Mac OS Extended (Journaled)" with a single GUID partition (default):
Good luck,
Clinton -
Boîte de dialogue pour l'enregistrement de données
Bonjour,
Je rencontre un problème au niveau de l'enregistrement de mes données.
A l'execution d'une commande, je souhaiterai qu'une boîte de dialogue demande "Voulez vous enregistrer" avec deux réponses possibles, "oui" ou "non".
Si la réponse est non, débuter l'acquisition sans enregistrer, si la réponse est oui, envoyer vers une autre boîte de dialogue avec le refnum de fichier.
Je joins mon VI en copie "Mode_Manuel_Bis" où j'initialise mon enregistrement dans le VI "Initialisation_Analyse"
Pourriez-vous m'aider svp ?
Résolu !
Accéder à la solution.Bonjour aznnath11,
Je vous ai joint un VI réalisant cette fonction.
Je vous souhaite une bonne journée,
Cordialement,
Sabri JATLAOUI - Certified LabVIEW Developer
Pièces jointes :
exempleAznnath11.vi 33 KB -
IPhone and iPad don't show up in Windows 7 iTunes
Using iTunes 10.6.1.7 on my Windows 7 machine I can no longer see my iPhone or iPad when directly connected via USB (I can't see them wirelessly either but that's not the issue).
I wish I could say when this started, but it's been at least a month and I don't normally connect either device to iTunes (because most of my music is already on the iPhone and because I use DropBox to transfer files to my iPad). It doesn't appear related to anything new I've done in Windows myself (might have been automatic updates but nothing I've installed or changed in Windows).
I DID try completely uninstalling iTunes using the procedures outlined by Apple (even manually editing directories to remove traces) and then installed the latest version of iTunes which works well (sees all my Airtune devices, for example) otherwise. I can see the iPhone in Explorer all right, just not in iTunes.
I've also tried disabling MacAfee AV and Firewall (there is no Windows firewall) with no luck. I *did* install a new router a month ago but since my PC does see the iPhone in Explorer I can't see why that would be an issue.
Any clues as to what to try next? My fallback position is to use my Macbook Air to connect to iTunes (of course it always works) but since all my music is stored on the PC (with no way to store all that data on my Macbook Air) I'm rather screwed if I go that route.Sigh. Now it seems to be working.
The *only* thing I did was to go to the router and open up port 3689 (for iTunes sharing) and reboot my machine. Now, I'm skeptical this had anything to do with "fixing" anything because my wife's computer (also using the same router) syncs just fine with her iPhone and always has. Now, it's true she's on Win XP, but opening a port on a router (following a VERY old article that Apple said was no longer supported) for iTunes sharing doesn't seem like it would do much in the way of letting me see my iPhone (except that it did).
(I opened up the port because I was thinking that perhaps my Macbook Air could sync my iPhone IF I could link it to my PC iTunes library -- that's when I found out I couldn't share it until I did the above and then suddenly all started working fine).
All of this crap makes me feel like the very old man I am (it really shouldn't be this difficult). But thanks for listening.
Maybe you are looking for
-
Creation of Service Product with Set Type and Attribute
Dear All, Please guide me with proper step by step process, How to create the product with the set type and attribute for service industry in sap crm 7.0 Regards,
-
Is it possible to open a book in Adobe Reader instead of Adobe Digital Editions?
Is it possible to open a book in Adobe Reader instead of Adobe Digital Editions?
-
How to access Camera Raw when invoking CS5 from Lightroom 3?
When I invoke CS5 from Lightroom, my NEF files seem to load directly without giving me an opportunity to make adjustments in Camera Raw. If I open the same NEF file from windows Explorer, CS5 presents the Camera Raw adjustment page and I can make adj
-
External SATA disks on MBP 15"
Hi all, Is there any adaptor that I can buy that would allow me to connect an external SATA II disk or array to an MPB 15" Core 2 Duo? I know that these machines have an expansion port, but it's not PCMCIA. Is there an adaptor that will do what I wan
-
Help, problem with merging expressions website with dreamweaver
hello, I am hoping you guys have some patience with this question. We created a website with frontpage and it's hosted on an ftp server and we use ftp open and edit the site. My question is, how can I open, work, and edit my site, since it is not eve