Ensure mail can be sent out properly
Hi,
I am to ensure that the current server running Exchange 2010, would be working fine with the domain to send out mails. But where to choose Edge Transport below?
Many Thanks & Best Regards, Hua Min
Please see here
http://technet.microsoft.com/en-us/library/bb738138(v=exchg.141).aspx
Mike Crowley | MVP
My Blog --
Planet Technologies
Similar Messages
-
How do I create an e-mail graphic poster that can be sent out?
I need to create an e-mail poster advertisement for a
recreation area that
will be sent out to shareholders. I need to do this for work.
Does anyone
have any suggestions on how I would do this? Would I create
the web page and
then send the web page in an e-mail. I need it to show up
directly, not
through an attachment. Also, once created, this will be sent
out to
shareholders. How do I save this file to disk in what format
so that it can
be sent out by my boss. I am doing this as an
extra-curricular activity for
work. Any suggestions would be helpful.
Thanks
jmickYou can open the web page in a browser, select all, copy and
paste into Outlook. That works. i don't know about other email
progs. -
Help - since 15:00 this afternoon Port 25 timed out and no mail can be sent
Have been sending and receiving mail all day - suddenly with no warning or reason mail cannot be sent from either my account or my wife's (on the same computer using the same ADSL line. The message is that "This message could not be delivered......The connection "smtp.mac.com" on port 25 timed out. All outgoing mail is blocked.
Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
.Mac: Server timeout alert message when sending email -
Limit address mail can be sent to
Is there a way to limit the addresses email can be sent to from Mail?
I want to set up Mail on some school computers so students can email photos to a web gallery, but I only want them to be able to send to that address. They will be sending from a .mac account and I don't want the account being used to send other emails.
Hope that makes sense.Any guess at how to fix it or is a reinstall in my future?
Start by looking at the logs for an example. There will be some indication in the logs as to what happened to the message.
Depending on how busy your server is, this might be as simple as tail -f /var/log/mail.log while you send such a message from your mail client. -
Mail Can be sent but is never delivered
Hi,
I was following the steps below to make it so a message can be received without a subject. After completing those steps I am running into an issue with my messages not getting to the recipient. If I send a message it acts as if it's been sent but the person getting the message doesn't and I get no message saying it could not be delivered. On the other end, if someone send me a message, I never get it and they get no message that tells them the message could not be delivered. This happens will all users of the server (any email address for the server). Any guess at how to fix it or is a reinstall in my future?
Thanks.
Yes, this is a default in Snow Leopard's Postfix configuration (which is the provided MTA).
If you really, truly, don't want that, then see:
http://www.icoretech.org/2009/09/reminder-empty-email-subjects-in-snow-leopards- postfix/
For the record, the change needed is:
edit
/etc/postfix/customheaderchecks
by commenting out the line:
/^subject: *$/ REJECT empty subject header
which is done by putting a "#" at the beginning of that line (no actual quotes) like so:
#/^subject: *$/ REJECT empty subject header
After which you should use the Terminal to issue:
sudo postfix reload
And check your logs (mail.log, system.log) for any errors in case you made a typo.
Please, do NOT use a GUI editor or if you must use TextWrangler (shareware) which will at least let you authenticate as admin and not botch the permissions on that file.
However it really is better to learn to use an editor like nano or better yet vi ...
whatever happens, use the Terminal to check and to verify that the permissions of all files are preserved or things will break.Any guess at how to fix it or is a reinstall in my future?
Start by looking at the logs for an example. There will be some indication in the logs as to what happened to the message.
Depending on how busy your server is, this might be as simple as tail -f /var/log/mail.log while you send such a message from your mail client. -
E-mailing: How to sent out an email to the Managers OUTLOOK express account
Hi Experts,
System is ECC6.0.
I hv requirement that, the sales orders comes from EDI into SAP. If there is a error in material (like,
non-sellable, not existing etc.), I need to trap this issue/error.....................fine, I did it and working fine.
But, in next step, I need to send out an email to the manager to his/her OUTLOOOK express(NOT work flow account) email account"s inbox, with a standard specified format!!!!
I do NOT think, work flow is necessorily involved here in this scenario!!!
So, let me know that,
1) Is WORK FLOW involvment i there?
2) How to get it done that, sending out email to OUTLOOK express account with a standard format
3) Any FMs, piece of code
replies appreciated.
Edited by: SAP ABAPer on Sep 6, 2008 3:34 PM
Edited by: SAP ABAPer on Sep 6, 2008 3:35 PMHello
I can offer two proposals:
1) Standard report RSEIDOCA is used to actively monitor IDoc processing.
This report can be scheduled in background and reports failed IDocs. Unfortunately SAP did not offer e-mail notification together with this report which is really a shortcoming. However, I have written a modified version of this report which allows to send e-mails (see below).
2) Another scenario we are using is to replace wrong partners/materials with dummy partners or materials ensuring that the IDoc will be processed under all circumstances. In this case we set the Purchase order number supplement (sales order -> header -> tabstrip Order Data: field VBAK-BSTZD) = 'ERR'.
Using a condition (transaction VOFM ) we trigger an ORDRSP IDoc if a new sales order has BSTZD = 'ERR'. This IDoc is forwared to SAP-XI and translated into an e-mail to the customer service.
The crucial parts of my report ZRSEIDOCA are shown below (adjust selection screen and notification routine):
...* perform show_act_moni.
** PERFORM send_notification.
PERFORM _send_email_notification.
MESSAGE s596.
ELSE." keine Benachrichtigung
MESSAGE s597.
ENDIF.
*& Form _SEND_NOTIFICATION
* text
* --> p1 text
* <-- p2 text
FORM _send_email_notification.
* define local data
* All activities done via facade CL_BCS!
DATA: lo_send_request TYPE REF TO cl_bcs.
DATA: lt_text TYPE bcsy_text.
DATA: lo_document TYPE REF TO cl_document_bcs.
DATA: lo_sender TYPE REF TO cl_sapuser_bcs.
DATA: lo_recipient TYPE REF TO if_recipient_bcs.
DATA: lo_bcs_exception TYPE REF TO cx_bcs.
DATA: lx_sent_to_all TYPE os_boolean.
DATA: ls_edidc TYPE edidc,
lo_idoc TYPE REF TO zcl_idoc,
lif_idoc TYPE REF TO zif_idoc,
ls_text TYPE soli,
ld_text(50) TYPE c,
ld_subject TYPE so_obj_des,
ld_date(10) TYPE c,
ld_time(8) TYPE c.
TYPES: BEGIN OF ty_s_idocdata.
INCLUDE TYPE vbak AS vbak RENAMING WITH SUFFIX _vbak.
INCLUDE TYPE kna1 AS kna1 RENAMING WITH SUFFIX _kna1.
TYPES: END OF ty_s_idocdata.
DATA: ls_idocdata TYPE ty_s_idocdata.
TRY.
* -------- create persistent send request ------------------------
lo_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create document from internal table with text
** APPEND 'Hello world!' TO lt_text.
** lo_document = cl_document_bcs=>create_document(
** i_type = 'RAW'
** i_text = lt_text
** i_length = '12'
** i_subject = 'test created by ZRSEIDOCA' ).
ld_subject = 'IDoc Monitoring'.
WRITE syst-datum TO ld_date DD/MM/YYYY.
WRITE syst-uzeit TO ld_time.
CONCATENATE ld_subject syst-slset
INTO ld_subject SEPARATED BY space.
CONCATENATE ld_subject ':' INTO ld_subject.
CONCATENATE ld_subject ld_date 'at' ld_time
INTO ld_subject SEPARATED BY space.
LOOP AT i_edidc INTO ls_edidc.
" Create IDoc instance
CLEAR: lo_idoc,
ls_idocdata.
lo_idoc = zcl_idoc=>create_by_idoc_control( ls_edidc ).
IF ( lo_idoc IS BOUND ).
lif_idoc ?= lo_idoc.
CALL METHOD lif_idoc->get_specific_data
CHANGING
c_data = ls_idocdata.
ELSE.
ENDIF.
WRITE ls_edidc-docnum TO ls_text-line NO-ZERO.
CONDENSE ls_text-line.
IF ( ls_idocdata-vbak IS NOT INITIAL ).
CONCATENATE 'POnumber' ls_idocdata-bstnk_vbak
INTO ld_text SEPARATED BY '='.
CONCATENATE ls_text-line ld_text
INTO ls_text-line SEPARATED BY space.
WRITE ls_idocdata-bstdk_vbak TO ld_text DD/MM/YYYY.
CONCATENATE 'POdate' ld_text
INTO ld_text SEPARATED BY '='.
CONCATENATE ls_text-line ld_text
INTO ls_text-line SEPARATED BY space.
IF ( ls_idocdata-kunnr_vbak IS NOT INITIAL ).
CONCATENATE 'Customer' ls_idocdata-kunnr_vbak
INTO ld_text SEPARATED BY '='.
CONCATENATE ls_text-line ld_text
INTO ls_text-line SEPARATED BY space.
ENDIF.
IF ( ls_idocdata-name1_kna1 IS NOT INITIAL ).
CONCATENATE '(' ls_idocdata-name1_kna1 ')'
INTO ld_text.
CONCATENATE ls_text-line ld_text
INTO ls_text-line SEPARATED BY space.
ENDIF.
ENDIF.
APPEND ls_text TO lt_text.
ENDLOOP.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_text
** i_length = '12'
i_subject = ld_subject ).
* add document to send request
CALL METHOD lo_send_request->set_document( lo_document ).
* --------- set sender -------------------------------------------
* note: this is necessary only if you want to set the sender
* different from actual user (SY-UNAME). Otherwise sender is
* set automatically with actual user.
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD lo_send_request->set_sender
EXPORTING
i_sender = lo_sender.
* --------- add recipient (e-mail address) -----------------------
* create recipients - please replace e-mail address !!!
LOOP AT o_email.
lo_recipient = cl_cam_address_bcs=>create_internet_address(
o_email-low ).
* add recipient with its respective attributes to send request
CALL METHOD lo_send_request->add_recipient
EXPORTING
i_recipient = lo_recipient
i_express = 'X'.
ENDLOOP.
* ---------- send document ---------------------------------------
TRY.
CALL METHOD lo_send_request->set_status_attributes
EXPORTING
i_requested_status = 'N' " suppress delivery confirmation
i_status_mail = 'E'.
CATCH cx_send_req_bcs .
ENDTRY.
TRY.
CALL METHOD lo_send_request->set_send_immediately
EXPORTING
i_send_immediately = 'X'.
CATCH cx_send_req_bcs .
ENDTRY.
CALL METHOD lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lx_sent_to_all ).
IF lx_sent_to_all = 'X'.
WRITE text-003.
ENDIF.
COMMIT WORK.
* * exception handling
* * replace this very rudimentary exception handling
* * with your own one !!!
CATCH cx_bcs INTO lo_bcs_exception.
WRITE: text-001.
WRITE: text-002, lo_bcs_exception->error_type.
EXIT.
ENDTRY.
ENDFORM.
Regards
Uwe -
When I will sent a mail, nothing happens
there is no mail activity and there is no error message
Recieving mail works
But using Eudora it works well
Any ideas?You propably got the SMTP-server wrong. Every wifi-distributor, and every country has a different SMTP-server. Are you on vaccation in a different country? Try to look at your distributors homepage and see if you got the right settings.
You can't send an email from China when you are in the US. -
Mail can't send out mail anymore....
hey everyone,
I just downloaded the 5 new apps a few days ago, and everything worked great, until now.
I can receive emails, but i can't send any emails out.
When i touch send, a message pops up saying,
"Cannot send mail. The connection to the outgoing server "(null)" failed.
What does this mean? The messages I've tried to send out, just keep on filling up my outbox. What does this mean? Am i missing something?
Thanks in advance for your help
vanlanHey vanlan,
Make sure you are using the correct email settings. Check the email provider website or use common settings found here: http://www.apple.com/support/iphone/mailhelper/
Try the tips in this article:
http://docs.info.apple.com/article.html?artnum=305634
Most Internet Service Provider email accounts will only allow you to send email on their server when you are connecting to the Internet over their network connection.
Jason -
Why do I get the message "Cannot send mail, the user name and or password for my email outgoing server is incorrect"? I use the same account, etc. on my iPhone and haven't any trouble sending mail.
If your email requires a password for the SMTP server you can set it up in the settings in the General mail setup. Some i.e Gmail require a password for SMTP.
Otherwise you will probably get better answers in the iPad forum.
https://discussions.apple.com/community/ipad/using_ipad -
Unable to receive FAX (can be sent out)
Hi, I have setup fax feature on HP laserjet Pro M276nw.Receive fax path PSTN line Voice router Cisco Call Manger Cisco ATA MFP I can send fax but unable to recived. while receiving im able to here ring tone and after disconnect with no FAX detected.Call path has been tested for analog FAX machine successfully. Thanks.
Hello , Welcome to the HP Support Forums! I see you are unable to receive Fax on your HP Laserjet Pro 200 M276nw. You are able to send them. I would like you to start here: Setting up the HP All-in-One to Send and Receive Faxes, once the Fax settings are properly configured continue below: Cannot Send or Receive Faxes Let me know the outcome, I will watch for your reply. Thanks,
-
After the iphone 5 update I can no longer send emails from my phone. I receive them but cannot send out. Also all my contacts were erased except for their
mobile numbers. I have an iphone 3gs.I'm having a similar problem. I can receive from gmail, hotmail, and yahoo. I can send from gmail. I haven't tried to send from yahoo yet. But, I cannot send from hotmail.
-
Mail can be sent but not received
We have three email addresses (POP) on the same ISP account and the other two can send and receive.
When I tried to send an email to the faulty address, the following reply came seconds later:
+Delivery to the following recipients failed.+
[email protected]
+Final-Recipient: rfc822;[email protected]+
+Action: failed+
+Status: 5.2.2+
+X-Display-Name: [email protected]+
+---------- Forwarded message ----------+
+From: Sender <[email protected]>+
+To: Addressee <[email protected]>+
+Date: Sun, 8 Feb 2009 12:03:30 0000
+Subject: This is the Sunday morning test+
+This is the Sunday morning test+OK, Keychain Access has three Keychains, two of which appear identical right down to Date Modified for each password) and a third called X509 Anchors.
Within each of the two apparently identical Keychains is a single POP3 password for my ISP with my email account number in the info box at the top (when I view the other two users's accounts in Mail preferences, their account numbers are the same as this but suffixed by _2 and _3. But, as I say, the only POP password appearing in Keychain Access is mine. Do you mean I should delete it? -
the copying msg to sent box can never be closed and i cant be sure if the msg is sent out successfully. please help me solve this.
thank you for your reply. However, if i close the copying to sent box window, it says my message cant be sent out properly and please wait. what should i do now?
-
Spam emails sent out from my mac/hotmail
Ok. I never had this problem in my 15 years as an email user.
Two weeks ago, spam mails have been sent out from my hotmail account to my contacts. I have changed my password, did the malware scan and removed anything it was flagged.
It has been quiet since then. However, as I logged on today, I noticed 41 mails in my junk folder, labeled as 'Mail System Error - Returned Mail' with the content on some kind of Wal-Mart contest.
Also, I have found one email with the following content:(I have replaced the part where my email was with '(my email was here)'
Any suggestions?? This is driving me crazy!
MAILER-DAE[email protected]ench-connexion.com Add to contacts
To
(my email was here) @hotmail.com
@hotmail.com
From:
[email protected]
Sent:
November-25-11 8:44:26 AM
To:
(my email was here) @hotmail.com
Microsoft SmartScreen marked thismessage as junk and we'll delete it after ten days.
Wait,it's safe! | I'm not sure, showcontent
Hi.This is the qmail-send program at dns4.french-connexion.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
<[email protected]>:
Sorry, I couldn't find any host named nobounce.local. (#5.1.2)
--- Below this line is a copy of the message.
Return-Path: <my email was [email protected]>
Received: (qmail 29484 invoked by uid 110); 25 Nov 2011 14:38:18 +0100
Delivered-To: [email protected]
DomainKey-Status: no signature
Received: (qmail 29478 invoked from network); 25 Nov 2011 14:38:18 +0100
Received-SPF: softfail (dns4.french-connexion.com: transitioning domain ofhotmail.com does not designate 210.54.141.253 as permitted sender) client-ip=210.54.141.253;envelope-from=my email was here @hotmail.com; helo=mta02.xtra.co.nz;
Received: from mta02.xtra.co.nz (210.54.141.253)
by ecosom.fr with SMTP; 25 Nov 201114:38:18 +0100
Received: from User ([210.54.90.215]) by mta02.xtra.co.nz with SMTP
id<20111125132908.UBMQ28897.mta02.xtra.co.nz@User>;
Sat, 26 Nov 2011 02:29:08 +1300
Reply-To:
(my email was here) @hotmail.com
From: Walmart Survey<
(my email was here) @hotmail.com
Subject: You have been selected
Date: Sat, 26 Nov 2011 01:29:08 +1200
MIME-Version: 1.0
Content-Type: text/html;
charset="Windows-1251"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Message-Id: <20111125132908.UBMQ28897.mta02.xtra.co.nz@User>
<html>
<head>
<meta http-equiv="Content-Language" content="en-us">
<meta http-equiv="Content-Type" content="text/html;charset=windows-1252">
<title>You have been selected to access</title>
</head>
<body>
<p><font face="Arial" size="2">You have beenselected to access the WAL-MART
Survey and win a $150.00 giftcertificate.</font></p>
<p><font face="Arial" size="2">Please <ahref="http://iva.orion.hk/online/walmart.html">Click
Here</a> and complete the form toreceive your reward. Thank you.</font></p>
<p><font face="Arial" size="2">This is anautomated message. Please don't reply.
Message ID:0019362574-WMRTSRV.</font></p>
</body>
</html>The way many viruses work on a Windows machine is once it's on there it will mine the address book for e-mail addresses and send out copies of itself using addresses that it finds. So there's nothing you can do on your end. Unless you find all those spam e-mails in your Sent box they weren't sent by you but by somebody with a Windows machine who received an e-mail from you and got a virus.
The address "mta02.xtra.co.nz" shows it was sent from New Zealand. Are you in New Zealand? -
E-mails NOT being sent by me!
Two e-mails have been sent out apparently by me (but not actually by me) recently to all in my address book. They are telling people to click on a link contained in the message (both different) links.
Could somebody tell me how I can stop this please? This seems to be spam in reverse!
Regards
Kathykathypink wrote:
Two e-mails have been sent out apparently by me (but not actually by me) recently to all in my address book. They are telling people to click on a link contained in the message (both different) links.
Could somebody tell me how I can stop this please? This seems to be spam in reverse!
Regards
Kathy
Hi Kathy. Welcome to the forums.
Please can you go a alter the password for your account - my shortcuts option 3, or via option 12a takes you there.
Whilst you are in webmail, go to Options/Mail (or More) Options and click on POP & Forwarding, to make sure that nothing has been set to forward the BTYahoo! Mail.
It sounds like someone (a hacker) has managed to get the password to your account, hopefully you've not fallen for a phishing scam - where an email pretending to be from BT may have requested you to enter username/password.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures
Maybe you are looking for
-
Doubt regarding Sender adapter file content conversion to RFC
Hi Experts, Below is the my Source and Target XML structure ( i have creaated source structure same as target RFC structure), This scenario is working fine when i give XML file as input. File -> XI -> RFC , xml file is able to update the informatio
-
New user to these forums. I've read all the Search documentation. 1. How do I search this forum by tags? 2. Is there a way to view just the posts that were answered or where the original poster found some help? 3. Is there a way to quickly move to ne
-
I have an ibook G4 256 memory. I opened iphoto. It asked to update the library. I said yes. The library began loading photos (there are no photos in the application at this time). It continues in loading mode non stop. I quit Iphoto. Reopened the app
-
I am messing with some different effects, but can't seem to drag them from the browser to the viewer window. Any ideas why? I can click the viewer and go to the tool bar to add effects, just can't drag like I should be able to.
-
CUP -Can we use refrence user ?
Hi Everyone, Is there way to request access in CUP saying same as XYZ users , I mean to say can we request access using refrence user can we create a custom tab for this? I would appreciate any input from you r experience Thanks in advance