Enter a billion dollar price on line item for PO

I cannot enter greater than 999,999,999.99 on a po line item.  Has anybody else run into this issue. What did you do to get around it. besides .... breaking it up over multiple lines
J

Hi!
You can order the same thing from me, only for 999.000.000 dollars and it will fit into that field
Regards
Tamá

Similar Messages

  • Enter Text in Price difference line item in MIRO

    Hello,
    My user wants to enter text in price difference account line item in MIRO. I tried to do it in MIRO simulation by doubl click on line item. But it does not show as we normally see in FI documents.
    Please advise how can I enter text in price difference line item while doing MIRO. Since this account gets posted automatically.
    Regards,
    Tapan

    Hi,
    You can create substitution with exit in GGB1/ OBBH
    In exit, give a popup for this price difference line item and in that popup user can enter the text and then fill that text in the line item.
    Your ABAper should be able to do it.
    Regards,
    SDNer

  • Purchase price variance line item - not to be posted in Parallel currency

    Hi All,
    Scenario:
    Transaction currency - SGD
    Local Currency - INR
    Parallel Currency 1 (LC2) - Group currency - USD
    Parallel Currency 2 (LC3) - Global Company currency - INR
    Import PO - MIGO - MIRO
    PO is raised in foreign currency.
    Material master price control is maintained in 'S'.
    While doing MIGO, I am getting following accounting entries:
    Stock a/c Dr.
    GR/IR a/c Cr.
    Price variance* a/c Dr.
    *The price varaince is because of difference in my material price as per material master and PO.
    If I go and check in FBL3N, I can see all the line items in Transaction, Local currency and 2 Parallel currencies.
    My query is, In SAP is it possible to avoid Price variance line item posting to Parallel currencies.
    To my knowledge I know that it is not possible to avoid a single line to post it to Parallel currencies.
    Thanks in advance.

    This is the answer from OSS
    Dear Customer,
    the system works as designed.
    When Material Ledger is activated, price differences are always
    generated under the circumstances you have described. The reason is
    that when material ledger is activated, price differences must not be
    included into the stock changes value, otherwise the system would
    not be able to calculate an actual price.
    When Material Ledger is activated, the customizing setting
    for handling price differences in the subcontracting process has no
    effect.
    Best regards,
    Santiago Lorite
    AGS Primary Support, Business Suite & Technology u2013 Logistics

  • How could i enter 100 materials in the single line item in the repair order

    Hello SD Guru's
    The below requirement is related repair process.Can you please suggest how i can go head.
    I have a one requirement related to repair process in SAP SD. As of now the the repair order creating for only one material in the single line item. But the requirment is if they returned morethan 100 material from same customer, how to process that in systme prospective and standard SAP.
    The standard SAP working based on single material  for each line item so that the repair indicatior is triggered for that single material only. So how cound i enter multiple materials in the single line item and how could i create 100 materilals in the sigle line item and how could the repair indicatior triggered for that line item which is having 100 materials
    Thanks in advnce
    Thanks
    KV

    Hello Chakrapani,
    Thankyou for your quick responce.
    How it could be possible if it is possible in SAP.
    Can you please suggest how can we achive in this scenario.
    Thanks & Regards,
    KV

  • No Price List Line Item in Price List detail page

    Hi
    I just started with Oracle ON Demand so my question my look silly but I couldn't find solution myself and I have to ask.
    When I created Price List and Product now it is time to connect one to another. But, when I went into Price List list page, click a price list name on the Price List detail page and try to click Add in the Price List Line Item section there simply is no such thing on my page. I tried on Product Edit page but wit the same effect. Do I do something wrong or for example there have to be specific field marked or unmarked somewhere? I still work in Staging Environment maybe it is a problem?
    Please help.
    Thanks

    At this time the price list functionality is only available for partner relationship management (PRM). It is on the roadmap to provide this functionality. However, I do not have a release date at this time.

  • Line Item For Price Variance

    Hi,
    What non FI datasource in RSA5 can i find the line item for Price Variance?
    Thanks

    Hi Sam,
    I think 0CO_OM_CCA_9 will word best for me.
    what does it mean by:  Actual Costs Using Delta Extraction ?
    Also would the field REFBN Reference Dosument Number have the invoice number & the PO Number?
    Thanks

  • Help on GOA screen control at line item for only material

    Hello All
    scenario:-
    1. create a GOA
    for a material with has alternative UOM ( CAR - ORDER UNIT ; 1 CAR - 34 ea) . So i created GOA FOR MATERILA LINE ITEM.
    FOR CAR .
    2. I released GOA and distributed GOA for CAR as Oeder Unit UOM.
    3. now my buyer  go to GOA and change UOM as EA and price I AND CHANGE THE PRICE IN THE SAME  LINE  ITEM.
    4. No PO released against the COntract in the ECC 
    5. Unfortunately buyer could change this UOM from CAR to EA. now GOA shows as EA in the line item
    6. this info taken to ECC via IDOC but this info  never updated in ECC contract.
    7. my PO release as CAR forever rather than EA since my ECC contract always shows  as CAR
    i can lock this item i can create  a new line item, no issues.
    how buyer knows each time ? if the system allows buyer always try to change rather than entering new item. it is not buyer fault. it is srm fault.
    Now ican u suggest some code in ui control badi , if the PO not releases system should not allow to change  the UOM in the GOA line item for a material.
    PS:- once PO released against contract  . srm will not allow to change the UOM . that is fine.
    SAP has to correct this problem and release the note.
    Muthu

    Hi Donald/SCot/ kiran/ jay...
    are you having the same problem in SRM 700. front end validation is required here toooooo...
    please help me.
    I could not accept this functionality ..
    why SRM allows to change the UOM by the buyer after  release the GOA for the same line item
    if srm allows to do edit, SAP SRM and ECC has to update the same UOM in the existing purchasing contract. IDOCs carry all new uom but why not updated in ECC purchasing contract.
    decided to write own logic in ui badi to protect this. what to do
    Muthu

  • Text in Line Items for BCS top side entry

    Do any of you experts out there know of a way to enter text in bcs line items for top side entries?
    Thanks
    Tim

    Dear Charles,
    I understand that you are asking for line item texts in BCS. This can be acheived by an enhanecemnt in the code and I have done it before. this code is there in an OSS note and you can apply this note by using transaction SNOTE. (Can u pls check the oss and u can fix it asap. If u dont find  the same let me know. I was checking this in my laptop and I ahve to go for a meeting now). I confirm that u can fix this in 5 minutes with that note.
    You will see the line item texts in the screen after that.
    Pls let me know if it helped.
    Thanks & Rgds
    Samir Neji

  • Line items for the PO are not automatically displayed

    Hi all,
    When attempting to post an invoice against PO, the line items for the PO are not automatically displayed. When we went to the Listing of PO's and brought this up, we noticed under the "invoice"tab that the: Invoice Receipt & GR-BsdIV is checked.
    need your help
    Thanks
    Fayaz

    Hi,
    Can you check delivery complete indicator in PO. It is in PO item details delivery tab.
    In MIRO transaction, select the  tab Purchase order/scheduling agreement, enter PO number and press enter.
    Right hand side select the layout all information .
    Regards,
    Chandra

  • FB60 - Two line items for tax amount (Posting Key - 50)

    Hi,
    I am facing some issue in FB60 invoice posting. For the same vendor(say V1) I am posting 2 different invoices for 100 USD - the <u>company code, G/L, CostCenter & Tax Jursdiction code are different</u> in both the cases. Once I do FB60 and got to document overview screen this is what I see...
    <b>Case1</b> - in the document overview screen I see a Posting key(PK) 31(invoice amount), PK50(tax amount) & PK40(total amount)...which is fine.
    <b>Case2</b> - in second case the document overview shows two line items for PK50(credit - tax amount) and tax amount is different.
    Two questions...
    1) Why there are two tax items (PK50 items) - is that dependent on tax rule or vendor or company code?
    2)My client says the tax amount should be same in both cases - but I am wondering how can it be, when tax codes are different in both the cases? Where can I check how these tax values are getting calculated.
    Any adivse/hints will be greatly appreciated/rewarded.
    Thanks
    Kiran

    AKu
      I got the same scenario also
      this second document display because of material price change u can double click that document

  • Item     Message text     LTxt        2A     Message(s) when structuring line items for

    Hi ,
    Please can any body help on this below errror message.
    At the time of executing depreciation (AFAB) we are getting below error message.
    Item     Message text     LTxt
          2A     Message(s) when structuring line items for document number ERROR00001     
          2A     Account 'Accumulated dep. account unpl. deprec.' could not be found for area 01     
    END     Error messages after processing of assets     
    END     Posting run ended with errors     
    Please can any body help on this issue.
    Thanks in advance for your help.
    Edited by: seshu_sapfico on Nov 2, 2009 5:12 PM

    Hi Seshu
    Please go to T-code AO90 and assign an accumulated depreciation account .
    To find the correct place , check your asset class and check which account determination you have in it.
    Once you know your account determination go to T-code AO90
    enter chart of depreciation
    double click on account determination on left hand side of screen
    click on correct account determination on right hand side
    double click on depreciation a/c on left hand side
    and enter your g/l for Acc.dep. accnt.for ordinary depreciation
    hope this should solve your problem
    Thanks and regards
    Sanjeev

  • Double line Item For Tax

    Hi SAP Gurus,
    I have a issue related to invoice verification.
    We have following tax procedure
           Basic Price  + Excise + Frieght + VAT  = Gross Price
    But here frieght is taxable on which VAT is caluculated.
    But while doing MIRO system is showing two line items  for Tax condition (VAT)
    1. One line item VAT amt calculated on   (Basic price + Excise duty)
    2. Second line item VAT amt calculated on (Frieght amt.)
    I have maintained single line item in OBCN.
    My client want to have single line item.
    Pls tell me how to solve this.
    Regards
    Gitesh

    Hi
    DCGR means freight GR. System automatically creates this at the time of MIGO, if freight condition is mentioned in PO itself.
    Hence in MIGO creation systems creates one material GR and with the same number one DCGR.
    You can see it from purchase order history through PO.

  • Actual cost line items for network

    Hello all,
    is there a way to display actual cost line items for networks? I have tried the following ways:
    - CJI3
    - KOB1
    When entering only the network number, the error message KB422 is displayed (No line items were selected). When entering the WBS number to which the network is attached the costs are displayed.
    Any ideas? Thank you!
    Regards
    Christian

    Christian Philipp wrote:
    H
    > When entering only the network number, the error message KB422 is displayed (No line items were selected).
    There is no actual posting against the network exists.
    Christian Philipp wrote:
    When entering the WBS number to which the network is attached the costs are displayed.
    after running double click the document number and check the account assignment whether it is to WBSE or to Network activity. It will clear your doubt.

  • Single line item for multiple line item payment.

    Hi
    I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
    However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
    But is it possible to get  single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
    If i will have one single line item for payment, vendor report would be simpler. Please help

    Hi,
    1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
    2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
    Rgds
    Murali. N

  • Mass change of payment in customer line item for all open line item.

    Hello,
    We have updated the new payment as per the new agreement with customer in customer master. We want this new payment term should also be updated in all the open invoices which are not cleared. Is there are way we can do the mass change in Payment term as the open line item in the customer where line item are more than 50. Please let me know the transaction code for the mass change of payment term in Customer account balances.
    Thanks and Regards,
    Rajesh Kumar Mantri

    Hi
    you can find the way to change the payment terms
    first check weather the payment term field is having change option in your document change rules in the line item for you customers.
    Financial Accounting (New)Financial Accounting Global Settings (New)DocumentRules for Changing DocumentsDocument Change Rules, Line Item
    if the payment term BSEG-ZTERM(payment term) is there for your customer and having deselcted check box for changing document you cannot change payment term for your company code.
    This can done client level or company code level.
    if the payterm  can be changed you do changes to payment terms mass level.
    Thanks
    ANJI

Maybe you are looking for

  • Employee Vendor Private Information visible

    We are using a vendor account group for employees and are in the process of restricting our roles from being able to see the  employee information by restricting access through F-LFA1-GRP.  What is the best possible way to restrict access from being

  • Can fonts in a PDF be converted to outlines with Acrobat Pro 9?

    Acrobat Pro 9.....Sometimes I get a PDF that I will have to do some edits to.  Because I dont have some of the fonts used, I cant edit the file without losing the fonts used.  Is there a way to have Acrobat maybe resave itself with all the fonts conv

  • TS1398 My ipod has internet downstairs but when i go upstairs, i have no internet. Can someone help me?

    I have a router downstairs in my house. When i go downstairs, i have internet. But when i go back upstairs, i lose my internet and my ipod cant connect to the internet untill i go back downstairs. Can someone help me with this dalema?

  • Security problem in oracle 9i Database Configuration Assistant

    Inside the tool Oracle 9i Database Configuration Assistant there is an option by which you can make a "copy" of your Database. This "copy" is called a template and you don4t need any password or aunthentication to do it, you just need the tool to be

  • Down payment role authorisation

    Hi all, The user wants to change the description of down payments. so I want to assign a role authorisation for T code FB02 only for down payment section for this user, because in FB02 can change all FI documents. please suggest what are the document