Enter a valid combination of human resources area / subarea rec.hum.". RP17

I need help,
I created a company, and then created an area of HR.
I joined to one another
Then I created the group and subgroup of employees and joined to each other.
By making changes in Infotype 0000 appeared to me the following message: "Enter a valid combination of human resources area / subarea rec.hum.". No message RP170
Someone can help me

Hi,
It looks like customization error.
Read enterprise structure, personnel structure and other structures very well.
Create company code, edit company code, create personnel area, create personnel sub area
Create employee groups and sub groups
Assign personnel sub area to company code
Assign employee sub group to group along with country grouping.
Check all relevant configurations pertaining to FI.
Create all the above without erros, so which you may not get the error and can proceed further.
Venu

Similar Messages

Error: Please enter a valid combination of personnel area and subarea

A few days back the exact same procedure worked...
but today onwards getting error message.

Hi Praneeth/Sriram,
Thanks for your reply,PA &PSA combination is fine ,assignment also fine.but getting error.
Values
PA: A001
PSA:CX02
Regards,
Chandra.

APP-PAY-06041: you cannot use the enter resource form because human resource is fully installed. Instead use the Human resource people form

hi
i'm getting this error when i'm creating in projects implementation superuser HR foundation - Enter AND maintain
APP-PAY-06041: you cannot use the enter resource form because human resource is fully installed. Instead use the Human resource people form
PLEASE HELP
Thanks
Regards
vijay

Did you check metalink -
PERWSEMP When Creating new Employee Using HR Foundation, APP-PAY-06041: You Cannot use the Enter Person Form Because Human Resources is Fully Installed (Doc ID 353323.1)

Cannot use Enter Persons Form because Human Resources fully installed

I have recently installed 11.5.10 (using RapidInstall, with the sample Vision database). A problem I encounter is that when I try to enter an employee, an error pops up:
APP-PAY-06041: You cannot use the Enter Person Form because Human Resources is fully installed. Instead, use the Human Resources People Form.
Since I don't need the HR module, how can I disable/uninstall/remove it?
Any help or pointers to any user guides will be appreciated.

Hi,
Uninstalling Human Resources is simply not possible.
you can try to trick the system by setting HR back to Shared install. One single update can do that. Do not try this at home.
If that is not enough, you can do a minimal implementation of HR, so that the full install people form works correctly, and so bypassing the shared people form in finance.

Error msg . while creating a GR w.r.t. PO --"ENTER A VALID TRADING PARTNER"

Hi ,
While creating a GR w.r.t. Purchase Order (MB01) getting a following msg:
"ENTER A VALID TRADING PARTNER "
In Vendor Master : Partner function has the vendor details
OA     Ordering Address
VN     Vendor
PI     Invoice presented by
Any thread would be helpful .
regards,
chait

Hi ,
THere is no entry in field :Trading partner LFA1 -
VBUND
ALso the vendor has acccount group : RMIT : Remit to Address
PArtner functions are maintained in vendor master viz. OA ,VN , PI .
regards,
chait

Encountering Error in webadi : "&Value is invalid. Enter a valid value for the Mapping column &Column"

We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
There are multiple records with same Employee name but different Person ID.
If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
"Enter a valid EMPLOYEE_NAME.
XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
The Query for the LOV is correct and is returning correct records.
Any pointers on this issue highly appreciated.

Hi,
The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
Thanks.

Cannot edit any roles in CUP5.2 due to "Enter a valid Role Name" error

We are running CUP 5.2.
I am having a problem with our Roles after they were uploaded into CUP; I cannot make any changes to the Role Details because CUP returns an error stating that our Role Names are invalid.
First I uploaded the roles (I continued to receive errors when trying to use the template, so I did them by uploading with the "Selected Roles" option).
Once they were uploaded, from the menu, I select: Roles --> Search Role and then I choose a role from the resulting list. When the next screen appears (the "Role Details" screen), I added all of the respective details (Business Process, Sub-Process, Detailed Description, Role Approver, Functional Area, etc.). When I pressed the SAVE button, I received the following error:
Please correct the following errors:
Please enter a valid "Role Name". Only Alpha-numeric, Space or Underscore characters are allowed
So I realize what the problem is - the "Role Name" field is automatically populated with our security role name as it exists in our SAP system ... and because our security roles all begin with Z:, it does not follow the CUP naming convention.
I'd like to just update the "Role Name" field but when you are in the "Role Details" screen, the "Role Name" field cannot be edited.
I saw the "Export" button and used that, in an attempt to edit the file to replace each occurence of Z: with Z_, and then upload it again.
So I updated the file accordingly, and then did an upload, selecting the "Overwrite Existing Roles" box.
It returned a successful message:
Import Status: 133 successfully imported out of 133 records found
Yet, when I go back to the list of roles, the roles still exist as Z: instead of Z_ so I still cannot edit any of the roles to add the required details ... has anyone had a similar issue and know how to work around this?
Thanks!

Hello Alpesh,
Thank you for replying!
I had already tried to export the roles and replaced the Z: with Z_ before creating this message, but the upload attempts failed due to the explanation above. But this time, I followed your (good) advice to delete the original Z: roles first, before uploading the corrected file.
Sadly, even after I deleted the original Z: roles prior to uploading the corrected file, I am still having no luck ... when I uploaded the file, again it (falsely) reports that the import was successful:
Import Status: 133 successfully imported out of 133 records found
After seeing that message, I quickly checked the roles, and none of the roles had uploaded. So now I have ZERO roles.
Any further ideas? I am thinking it may be something very small that is being overlooked ... perhaps certain buttons must be selected/not selected on the import screen? Or could it be an issue with the file itself?
When I do the import, I only select the button for "From File ..." and retrieve the file from my desktop via the Browse button. I do not select any other button, nor do I make a selection from the System or Role Source boxes. I have just selected that one button only ... I've tried it with and without checking the "Overwrite Existing Roles" box, but neither one works.
The part that bugs me the most is that I receive what I perceive to be an inaccurate/bogus "successful" status each time I attempt the upload of the file. At least if I had an error message, I might have something to work with to troubleshoot this.

How to "force" user to enter a valid value in a TextBox

How can one create a TextBox in which the user is not able to leave (commit the value, change focus, or perform the action of another control) unless a valid value (the value to be committed) is displayed?
The following is the best I've come up with so far.
Good: It doesn't permit a value to be committed unless it is valid.
Good: It doesn't permit the focus to be changed when TAB is pressed unless it is valid.
Bad: It permits the user to perform the action associated with a button at any time.
In the following code pressing on the button prints "I've been pushed", no matter the value of the TextBoxes. Can I stop this (in general, not for specific buttons)?
class ValidTextBox extends TextBox {
public-init var validValue:String = "";
function isValid():Boolean {
    return (rawText == validValue);
var isFocused = bind focused on replace {
    if (not focused and not isValid()) {
      requestFocus();
override function commit():Void {
    if (isValid()) { super.commit(); }
    else {};
var string1:String = "" on replace { println ("String1 = '{string1}'") };
var string2:String = "" on replace { println ("String2 = '{string2}'") };
def textbox1 = ValidTextBox { text: bind string1 with inverse; promptText: "String1: enter abc"; columns: 20; validValue: "abc"; }
def textbox2 = ValidTextBox { text: bind string2 with inverse; promptText: "String2: enter def"; columns: 20; validValue: "def"; }
def aButton = Button {
text: "Push me";
action: function():Void { println("I've been pushed!"); }
Stage {
scene: Scene {
    width: 250
    height: 300
    content: [ VBox { spacing: 10; content: [ textbox1, textbox2, aButton ] } ]
}

It sounds like you are looking for a concept of validation that groups items together. In days long gone Oracle used to have a product called Oracle Forms - that had field validation, record validation and block validation. So in your example if string1 and string2 were in the same persistable data object then the equivalent concept would be 'record validation'. The code in your button would say "if the record is valid print". A record is only valid if all its fields are valid.
JavaFX really provides a 'GUI toolkit'. I think you are looking for a fairly advanced binding framework - a framework that builds on the concept of field level validation. You can approximate such a thing by creating a 'validation group' class. This class would be able to have nodes added to it and have an 'isValid()' function which only returns true if all the node items are valid.

Enter a Valid Attendee in Training & Event Management

Dears;
Whenever I'm trying to book a training event to an employee through PV00 I get always a message Enter a Valid Attendee, however, I'm entering an existing employee.
How can this be solved?
Thanks in advance.
Best regards;
Lobna

Hi Lobna,
Well when you book or prebook an employee to a course, the system checks if the employee is valid for the entire business event/business event type period.
So either the Business Event type exist before the entry date or it exist after the departure date. As explained on the former URL link I attached.
You may use the table T777BIRTH to extend the maintenance of the relationship between a P and another object. In your case you would probably need to use this table to enter the extended maintenance of relationship of a person to a business event type with relationship 27 (prebooked) from birth date of till the highest date (31.12.9999)
Normally, a person can only be booked or prebooked to a business event or business event type if the person is active during the entire period of the business event (type). However, using table T777BIRTH it's possible to extend relationship
maintenance if the period comes before the hiring date (From birth) or after the leaving date (Until highdate). There you can
extend the booking relationship so you can book these employees.
The reason could be the entry-date. You can try to solve this by customizing table T777BIRTH according to your requirement to book these kind of people anyway. P B 025 E X in field BIRTHX allows to create the relationship with a BEGDA before the entry-date.
before doing such change, look first what are the begin and end date of the business event type and the active period of the employee to make sure if you really need to extend the maintenance of the relationship, or you could simple decrease the validity period of the business event type.
Best regards
Hadrien

Enter the valid user name and password to login into the workspace

Dear Reader,
As we are working on System 9.2.0, the problem we are facing are as we log into Workspace we get a error "PLEASE ENTER THE VALID USERNAME AND PASSWORD TO LOGIN TO THE SYSTEM"; and the moment we access FR studio another error message pops up which says "COULD NOT CONNECT TO GSM SERVER HYPERION:1800" we have installed Hyperion BI/UI within the same folder and configured with same repository, Every service is successfully installed and configured, in the shared services we are able to see the BI+ node and we also have tried configuring the shared services and BI/UI , twice or thrice. Kindly suggest the solution for the same.

Hi Vikram,
Check whether your FR service is started and you database is up and running.
Regards,

"The file destination provided is not valid. Enter a valid location."

I'm running Acrobat 9, with all updates installed, on Win XP.
I have used shared review before, and it worked. I click Comments, Send for Shared Review.
When I try to initiate a shared review, I browse to select my pdf, click on the filename, and I immediately get this error message: The file destination provided is not valid. Enter a valid location.
I have tried accessing a file on a shared network behind my company's firewall, on my local hard drive, and my desktop. All three locations generate the exact same error.
I know the "source" file and the "shared" file have to be in two separate locations. The error message is occuring BEFORE I can specify anything else.
Any and all help is greatly appreciated!

I can share a document on Acrobat.com (I just verified this), but I can't send one for shared review. Same error message as before. Curiouser and curiouser!
Date: Wed, 31 Mar 2010 08:13:29 -0600
From: [email protected]
To: [email protected]
Subject: "The file destination provided is not valid. Enter a valid location."
Has the version of Acrobat that you're using been packaged by your IT department? If so, can you find out if they perhaps disabled access to Acrobat.com. Sometimes in doing this, shared reviews are inadvertently disabled.
>

HT201209 i cant register my debit card to apple id...........when i am tring to register........it shows your payment method was delclined please enter a valid payment method what should i do???

i cant register my debit card to apple id...........when i am tring to register........it shows your payment method was delclined please enter a valid payment method what should i do???

If it's a debit card then I don't think that they are still accepted as a valid payment method in all countries - from this page :
You may be able to use other payment types in your country, like debit and Maestro cards.
which implies that they are not accepted in all countries, and there have been a number of posts about them being declined.
Is the card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management.
Or do you have a credit card that you could use instead ?

Patch List for Self-Service Human Resources (SSHR) in HRMS 11i

Friends -
We are planning to implement Self-Service Human Resources in HRMS 11i. I am able to find out information using metalink note : Recommended Patch List for Self-Service Human Resources (SSHR) in HRMS 11i [ID 108897.1].
As per note : 108897.1 there are bunch of patch details i am not sure which patch i need to apply currently we are on oracle apps 11.5.10.2 with Rup5
SQL> SELECT
2 BUG_NUMBER, DECODE(BUG_NUMBER,9062727,'K RUP5' ,7666111,'K RUP4' ,6699770,'K RUP3' ,5337777,'K RUP2',5055050,'K RUP1',3500000,'K',3333633,'J',3140000,'I',3233333,'H', 3116666 ,'G', 2968701, 'F'
3 ,2803988, 'E','Unknown')
4 FROM AD_BUGS
5 WHERE BUG_NUMBER IN ('9062727','7666111','6699770','5337777','5055050','3500000','3333633','3140000','3233333','3116666','2968701', '2803988')
6 and rownum=1
7 order by 1 desc
8 ;
BUG_NUMBER DECODE(
5337777 K RUP2
Please let me know which patches i need to apply for SSHR as per metalink note : 108897.1
Regards
VSH

Hi,
I agree. However, I understand that the Patches search in My Oracle Support website mentions that the RUP patch is included in the next RUP patch available.
Please note that you need to consider also the patches in the following documents on top of RUP 5.
Note: 1075477.1 - Known Issues on Top of Patch 9062727 11i.HR_PF.K.DELTA.5 (11i HRMS RUP 5)
Note: 1096417.1 - Applied Patch 9062727 (11i.Hr_pf.K.Delta.5) And Left With FFP<######> Invalid Packages
Thanks,
Hussein

Error message LSO 517: enter a valid participant

We are facing a challenge with booking employees on training activities on a date when they were not "active" at work.
The challenge is that an employee may attend a training event prior to his hiring date, or in between contracts ie while he is not formally employed.
Is there a way to book a participant if is not active in transaction code PA30 PA40.
Error message is enter a valid participant

I would be challenging the business as to whether this should even be a valid business practice. Typically, learners should not be taking training under these scenarios...there can be a variety of legal implications associated with this practice. For example, you might be obligated to compensate a learner for their time if they are training prior to hire date. And what if someone is travelling to attend training (but not on the payroll), and they are injured?

Error message " The serial number you entered is valid, but a qualifying product annoy be found on this computer" appears. Unable to reinstall CS5.5 on my macbook pro after Hard disk crashed & was replaced.

Error msg " The serial no you entered is valid,but a qualifying product cannot be found on this computer" appears. Can't reinstall CS5.5 onto Macbook pro after Hard disc crashed & was changed.

It is not clear if you understand what that message is indicating. It is telling you that you need to identify the older version of whatever CS5.5 upgrade you are installing to prove that you qualify for the upgrade. This could be CS5, CS4, etc.
Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

Enter a valid combination of human resources area / subarea rec.hum.". RP17

Similar Messages

Maybe you are looking for