Enter access code in ecc 6 while given create in se38
hello everbody,
i am my system i installed ecc 6.
while using se38.
given program name and create ...
it is asking enter access key.
plz guide how u use it?
Dear Suresh
To work as a Developer , i.e. to write ABAP programs you need developer access key from SAP. This pop up message for Access Key you will get for the first time. Once you enter that Access key, it will get stored in DEVACCESS table against your user id. Next time onwards, it will not ask for Access key.
How to get DEVACCESS key?
You have to register your user id in Service MarketPlace. You can ask your Basis team member to register your user id there.
Regards
Anindya
Similar Messages
-
My I pad states disabled and is frozen and cannot enter access code?
My I Pad stateds dusabled and is frozen. I have powered off and everything, but, still frozen and cannot enter my access code.
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode. -
HT4623 cannot enter access code letters .the touch pad only shows numbers
cannot enter letters in viber access the touch pad only shows numbers
Hello,
I have the exact same problem now. I setup Lotus Traveler and enabled my code lock. When I entered the default code 12345, it asks for a new code with numbers and letters but I only have numbers available to choose on the keypad. So I am locked out and have had to go back to my old phone. There are no other options on the keypad.
Did you find a solution? -
Am i the only one who when trying to enter the code for creative cloud activation ?
I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.
I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
Re: Am i the only one who when trying to enter the code for creative cloud activation ?
created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Error "Enter section code" while doing revenue recog for Korea company code
Hi
While doing revenue recognition for a sales document using VF44 for Korea company code , i got an error to "enter sectio code".
There is no WHT for the customer, only VAT is entered in the sales price.
How to resolve this issue, Please help.
Thanks,
VaishnaviResolved.
-
My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?
Welcome to Apple Support Communities
Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact -
Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?
Ask whom/wherever you got the redemption code from for one that has not already been used.
-
I have followed the instructions provided on the Adobe.com/go/getserial site several times. I have created an Adobe account and have signed in. I have found the redemption code in the box I bought at Staples or Best Buy (don't remember which or maybe it was at Apple). I am never given a screen on which I can enter that code to get my serial number. What am I doing wrong?
John, let me explain. I recently purchased Adobe Premier Elements from
Staple or Best Buy. When I tried to install it, I was told that I needed
to go to an Adobe web site to get a serial number. There was a piece of
paper in the box that I had purchased that contained a redemption code. As
I went through the process on the Adobe site, I was told that I would be
shown a screen on which I would list that redemption code. Once I had
entered that code, I would be given the serial number required to finish
the installation of the Premier Elements code on my Mac desktop. I went
through the process several times and was never given a screen on which I
could enter the redemption code so I am unable to complete the installation
because I have no serial number.
Please let me hear from you. I spent over $120 for the code and will take
it back to the retailer if I cannot finish the install. This should not be
this hard.
Rusty Edmister
On Sun, Jul 13, 2014 at 6:23 PM, John T Smith <[email protected]> -
Used CS6 for a year or more, now says it's not registered! I have 1 or 2 unused keys but do not want to use them. Can't get the CS6 applications to open to enter the codes I was given when I first registered them...
You'll need to use web chat. This file shows you links to Web Chat:
Adobe ID, sign in, and account help -
try to enter reedem code mountain lion and it says you need a payment method to access this functionanlity
I got it to work by using a US Apple ID.
-
I was given a 50$ iBooks gift card, I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy
shrinkydink54 wrote:
... The information I got back from support was not clear ...
Contact Support again...
Use this Link > Apple Support iTunes Store Contact
Note:
iTunes Gift Cards are only Valid in Country of Issue. -
Hi Experts,
We are not able to create posting period of 2014-15 as we are getting this error.
Enter Valid code,Tax Definition [Message 173-36] error .Please find the enclosed error screen shot for your reference.
Regards
KMJHello KM Jayaprakash
I have the same problem, but i dont see (know) the screen which i can check "Advanced G/L account determination check box". I am in SAP B1 9.0 PL15. Please can you publish a screen shot.
it's urgent please.
Thanks -
I have misplaced the card or accidentally threw it away! I recall entering the code on back somewhere in my apple store app. Is there a way to find out if I did it right? If I did not do it correctly can u help me? Pleeeease!!
Launch the App store or iTunes store...scroll all the way to the bottom...your Apple ID & any credit balance will be displayed. If not there, & you no longer have the card, don't waste your time contacting iTunes support, as there is nothing they can do for you.
You can also login to iTunes on your computer, & any credit balance will be displayed next to your Apple ID. -
what can i do to off the access code i put and forget, for me to use my ipod touch like before ? thanks to try to give me a solution for me to use it again as beofre.
connect to iTunes
Sync it
Restore it
Set it up from the backup -
I've lost my access code for my device and the type of device is the iPad Mini
I lost my access code from may device and the type of device is the ipad mini
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
How can I set time-out while accessing a url using URL object?
Hi I'm trying to get the content of a URL using the following code. How can I set timeout (example, 10 secs), if the webserver takes a while to respond.? BufferedReader inbuf=null; URL url=null; try { String urlString="http://host-machine/
-
WSDL, custom datatypes, fault element name issues
Hello all, I am having a LOT of problems with BEAs webservices. I am posting this here in the hope that someone can help me and tell me what I am doing incorrectly. I am running WebLogic Server 7.0 SP1 Mon Sep 9 22:46:58 PDT 2002 206753 WebLogic XMLX
-
How to retreive resultset of WCM_PLACEHOLDER service using ridc api
Hi, I am trying to call WCM_PLACEHOLDER service using ridc api. I was able to set dataFileDocName and templateID, but was unable to retreive the result set, since I am not sure with which name should I have to search in the result set. AS like GE
-
My integrated webcam doesn't work on skype - lates...
Hello everybody. I hope you can help me. My web cam doesn't work on skype. The camera itself works - I checked via Lenovo web conferencing. I attached txt with information from DirectX Diagnostic Tool. I really hope you can help me, Skype is great, a
-
After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.