Enter Admin Password Problem

I'm helping someone that changed and forgot their laptop password. We're getting the request to Enter Admin Password or Power on Password. Not knowing the password, it comes up with System Disable 50757764. Any help with the password needed would be greatly appreciated. Thanks!
This question was solved.
View Solution.

Hi,
Try entering: 45635360
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Enter Admin Password or Power On password. The System Disable number is [ 59568624 ]

3) Enter Admin Password or Power On password. The System Disable number is 59568624

Please enter : 46440200 Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

My compaq cq58 says enter admin password

my computer says enter admin password or power on password
This question was solved.
View Solution.

Thanks so much worked perfect

Safari, parental controls or admin password problem?

My grandson was able to access ** sites and add them to his bookmark bar. When asked for the admin password he typed it in wrong 3 times and then it said try again later, he clicked ok and then the add to bookmarks window appeared and he added it. I am using Safari 4. He should not be able to add anything without my password (that he does not have) I tried it and that is how he did it.
Is the problem Safari or is it the admin password box?

I have Safari 4.0.2, Mac OS X 10.4.11, all updates.
I have a 10-year old daughter.
I use the Parent Controls for her Managed account to enable certain websites she can go to. If the website is not part of the Bookmark Bar, she can't go to that website.
That was under Safari v3.x.
In Safari v4.x, with Parental Control mode enabled, go to any website. It is, at first, denied.
Click the "Add Website" button, cancel the Password dialog, you'll get the add to Bookmark
dialog. Click cancel and the website is STILL added to the bookmark. It does this especially when you have a folder on the Bookmark bar. Safari v4 will add the website to folders in the Bookmark bar on the first go-round.
My daughter inadvertently figured this out. She started trying odd names for websites,
including sex.net. She then clicked on a link at that website and, going through the process above, added it and went to the website.
It was only after she shrilled when she saw the images that I came over and saw what she had seen and learned how she got there.
I did searches on this issue and found many others noting that the security Parental Control in Safari v4 simply does not work. (e.g. this Apple discussion).
You've got some explaining to do, Apple.
Bryan C

Admin password problems

i just bought a mac book yesterday and there appears to be an admin password already associated with my computer. As I'm sure you understand this makes it a bit tough to install new hardware etc. I don't know what to do because i can't even reinstall the operating system. Can someone please please help me.

Follow the last set of instructions in this article. You will need the MacBook's installation disks.
(18492)

Admin password problem.

My wife asked me to update her G3 iBook os from 10.3 to 10.4.
Ran into trouble when we couldn't recall the admin password.
Tried nothing (return w/o typing), ibook, apple, and a few others to no avail.
It was bought used, so we don't have a startup disc. Any ideas for changing this (other than buying her a newer Mac)?

Are you able to start up from the Mac OS X 10.4 Install disc?
If so, you should be able to follow the instructions for resetting the password in OS X 10.4, found here:
http://support.apple.com/kb/ht1274

Admin Password problem for an HPLJ pro 200 color MFP

I forgot the admin password for my HPLJ pro 200 color MFP, please help
This question was solved.
View Solution.

Hi BigWillP
I will be happy to help you.
If you mean the password for the printer itself then I will private message you with the reset for the printer. It will also take the printer off the network and you will have to reconfigure the network again if it is setup on a wireless network.
There are two models close in name the m251 and m276, which one do you have?
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Caps Lock Won't Disengage - Cannot Enter Admin Password

I was using email when my Caps lock key would not longer disengage. Believing that I had hit a combination of keys that had somehow bypassed the caps lock key and locked caps, I restarted.
Restart was slow and included a grey bar scale on the bottom of the boot screen that I have not seen before.
After restart, the log on screen came up in 'Safe Boot' mode.
My password is an all lower case sequence and my caps key is still locked on restart (reboot now?)
I can't enter my password.
What can I do?
What happened?

The 'shift' key was physically stuck. I was unprepared for this as I never eat or drink at the computer. But, it seems to have something in there regardless.

Can't enter admin password

I have just updated to Mavericks. When I am prompted to enter my administrator password I cannot type in the username or password box.
I can delete the preloaded username information but cannot type
The username and password box get a blue glow when I click into them, but don't accept any text
I tried using the software keyboard but it doesn't recognise I am in a text field. Not a hardware problem
I can sign in as a user, it is only the admistrator sign-in I have a problem with.
I tried restarting twice to no effect and downloaded the latest OSX updated

I have found that you need to be the administrator. If you have already deleted the administrator account and created a new one, and the problem still persists, I'll give you the same advice I was given, reinstall your current operating system. Mine was having this problem on lion. I have not yet reinstalled lion however, so I don't know if this is a 100% fix.

I get a blue box it says enter admin password or power on password

i tryed a password three time it says system disabled i turn off same thing again i dont know password and i do not knew serail number so ya

Steps to be followed:
1. Use the unlock code posted above to enter the BIOS
2. Disable all passwords that are enabled
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.
6. Then leave the BIOS by saving & exit option to save the changes.
Troubleshooting:
Incase if the Password doesn’t work please try a Hard Reset as follows.
1. Shut down the notebook
2. Unplug the AC Adapter and then remove the battery
3a Hold down the Power button for 30 seconds
4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook
5. If you now see a password box, Please type the same Password I shared before and press enter
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Enter current password problem, hp mini 1000, cnu9240lp8

Please help
This question was solved.
View Solution.

Hi,
Enter: e9lo7v1k2u ( 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Reset admin password - SJSWS 7u8

Hi,
I've read through the documentation and a few of the other posts about resetting the admin password in SJSWS. Plainly, it doesn't work
[root@server bin]# ./wadm reset-admin-password --user admin --host localhost --port 8989
Please enter admin-password>
Please enter admin-password again>
CLI103 Command 'reset-admin-password' failed. :: netscape.ldap.LDAPRebindI've not been able to find any matches to the 'netscape.ldap.LDAPRebind' error, and don't know why it's talking about ldap in the first place (as SJSWS isn't attached to any LDAP).
The local machine (RHEL5.5, Linux x86_64, amd64 SJSWS install) does use LDAP for authentication, but it shouldn't be trying to touch that.
I can't find any further log entries for the failed password change either.
This is the administration console, with one other node hanging off of it.
[root@server bin]# . ../lib/wsenv ; $WS_JAVA/bin/java -version
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)Any ideas would be welcome ;)

Unfortunately you've run into a known problem - 6914493.
Edit $(INSTALL_ROOT)/bin/wadm and add ${classpath_prefix}/ldapjdk.jar to the classpath variable and try re-running the command.

HP Admin Password or Power On Password window

I am getting a Enter Admin Password or Power On Password window on my HP G71 laptop, when I enter incorrect 3 times I get this code 80127514. Can someone pleases help me?
This question was solved.
View Solution.

Dinky try.
35885530
Use that code to go into the BIOS.
Disable all passwords that are enabled.
IF asked for the CURRENT password use that code.
IF asked for NEW password just hit enter.
If asked to VERIFY password just hit enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

SFTP password problem

Hi Everyone,
I've just begun setting up Server with port forwarding through my Airport Time capsule. Everything works when I SFTP as myself. from terminal, either SFTPing to [email protected] and entering my apssword lets me in... as well as simply SFTPing to 123.456.789.000 and entering my password.
problem is, I created another account. I created one account through "users" in system settings, and I tried to create another account within Server. both accounts I gave administrator priveleges to, just for good measure.
both accounts come back saying incorrect password. my spider sense is telling me that it might have something to do with the way MY username is configured -- in my previous experience, I shouldn't be able to simply ftp to the raw IP without a user@ and have it ask me for a password.
Thanks,
Aemilia

So if I understand this correctly, you now have two accounts with the same short name? You'll want to resolve that duplication; that's not something that works well, and all sorts of stuff can get tangled.
If you don't have duplicated shortnames here, then there's something else going on. Start by confirming the remote account has ssh access and a valid and accessible login home directory; that's all necessary for ssh (and sftp, which is based on ssh) to work.
Also have a look at the system logs for any related errors.
Also consider setting up certificate-based logins for ssh (and sftp), as those are more secure than passwords, and particularly given the prevalence of brute-force ssh attacks on the network.

HT1338 Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need

Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????

Your admin account password.

Enter Admin Password Problem

Similar Messages

Maybe you are looking for