Enter and send message from portal

Hi
I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button ?

Hi Ronaldo,
Also, as Jocelyn says...
<i>Hi folks,
Actually advance with dialog will work under some specific scenarios from the UWL.
1. If you are launching work items using WinGUI.
2. If you are launching work items using SAPGUI for HTML and are on a high enough release .
In other words, it depends on the launch mechanism - not the UWL.</i>
Try checking the launch mechanisms.
Regards
<i><b>Raja Sekhar</b></i>

Similar Messages

  • After Clicking Rejection(Enter and send message from portal )

    Hi
    I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button or any other task is there for Enter and Send Message supporting SAP portal...
    please let me know the solutions...
    Thanks
    ram

    Ram,
    the Advanced with Dialog works fine only in certain scenarios, as Jocelyn mentioned in the following thread. pl go thru' this.
    Extended Notification-Submethods and advance with dialog not supported...
    COming to your requirement, if you want to provide a box for the user to enter Rejection reason on the portal side, you can use the User decision Actiion Handlers as given in the below link. It is very simple and fast implementaion.
    I have done this recently, so if you need more details, let me know.
    But go thru' the following help.sap link on ACtion Handlers.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/df014b037141ca9afc6433ed42b519/frameset.htm
    Hope this helps.
    Regards,
    venu

  • GMail, IMAP and sending messages from the iPhone

    I have recently switched from POP to IMAP. My ISP doesn't support IMAP, and so I get GMail to pop my ISP, and then download the messages from GMail with IMAP. Within GMail I have set things so that by default I can send a message through my GMail account using +my normal ISP's email address+; recipients are therefore unaware of my use of GMail - which is how I want it.
    BUT ... messages sent from the iPhone show up as having been sent from my GMail address. Is there any way that I can change this, so they appear to have come from my normal address? I don't want to set up a second a/c on the iPhone, as I want all of the messages to stay within the GMail IMAP system.
    GMail's web based >> >Settings >Accounts >Send mail as: >> facility does not seem to appear within the iPhone.
    Or am I missing something?
    Any assistance gratefully received

    Many thanks for your reply - and I think that I understand what you are saying; however the GMail system does allow me to send a message using another "reply to" address so long as I have authenticated that email address within GMail first. I've been through that process, and I can send a message which appears to be from my normal ISP's address but in reality is sent through GMail (what some might refer to as using a spoofed address?) - but I can't do this from my iPhone.
    If the restriction is insurmountable for the iPhone, I'll just have to revert to POP instead of IMAP, as I can then separate my normal address and my GMail address - it's just that a combined IMAP system would have been a more elegant solution ...
    Kind Regards,

  • Nokia X2-02 and sending messages from PC from seco...

    Hi,
    I'm wonder if there is a possibility to send SMS message from PC Suite application connedted to Nikia X2-02 from second sim card.
    If I'm doing it from my phone he is asking me which card he should use.
    I would like to have the same ability to select sim card to send sms from PC. Is it possible?
    Right now all the sms messages are sent from first sim cardo only from computer. Please help and thanks in advance.

    Yes I know that can be set in the phone. But it can be done manually and in Sim Manager you can set only the type of service which should be used on selected card. Or manually can select one of the cards.
    So it looks like that PC Suit always selects first sime. The second cannot be used to send sms.

  • TS20000139 Enter and Send message

    Hi
    We are using Trip request workflow WS20000040. and when the approver rejects the trip request then the task TS20000139 executes and pops up a window where approver writes his comments , receiver id (employee) and  will send it to the employee. The process works fine but our requirement is to write the receiver id by default (i.e.by workflow itself) as Workflow Initiator.i.e.No need for manager to search his employee's  user id and enter in the receiver field. How can we achieve this ?
    Thanks
    Shrinivas

    Please don't ask new questions in an existing thread like this, for 2 reasons:
    1) you can not award points
    2) you are messing up the archive of answered questions
    The recipient list is a multiline container element, so sending to more than one person is supported.
    Message was edited by Kjetil Kilhavn:
    Since I don't have access to a SAP system now I can't confirm that the recipient list is a multiline container element in this particular task, but SOFM.Send method supports multiple recipients unless I am getting completely senile.

  • How to send message from Message Driven Bean  to JMS client?

    In my project I have JMS client, two QueueConnectionFactory and Message Driven Bean. Client send message to MDB through the first QueueConnectionFactory , in one's turn MDB send message to client through the second Queue Connection Factory . I already config my Sun AppServer for sending message in one way, and sending message from MDB to the second QueueConnectionFactory. But on my Client there is an error : �JNDI lookup failed: javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MyQueue2� (jms/MyQueue2 � this is the name of my Queue). So it couldn't get this message.
    P.S.
    Thank you for help!!!

    What is the name of the second queue?is the connection factory on the local?Yes the connection factory is on the local. The name of my first queue is jms/MYQueue and the name of another one is jms/MyQueue2.

  • TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

    Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

    search google for "iphone remove picture from contact"

  • My iphone is sending messages from icloud and my phone number is not listed in the icloud settings now, just my e-mail address

    My icloud used to have my phone number as an option to send messages from but now it is gone and only my e-mail address is there.  This never happened prior to downloading the ios 7 update.

    if you turn imessage off then restart your phone turn imessage back on it worked for me

  • Why is my iphone sending messages from my email and not my number?

    My phone will send messages from my email rather than my number. I have gone to the settings to switch it to send just from my number. When i do that, it does not send. What do i do to fix this problem!?

    Hello therealdeal333,
    Thank you for participating in the Apple Support Communities.
    It sounds like you're only able to send iMessages using your Apple ID (email address) on your iPhone. If you're not able to send iMessages using your phone number, first try signing out of iMessage and FaceTime on your iPhone:
    Go to Settings > Messages > Send & Receive, tap your Apple ID, then tap Sign Out.
    Go to Settings > FaceTime, tap your Apple ID, then tap Sign Out.
    If you send iMessages from other devices (such as a Mac or iPad), sign out of those as well.
    Then sign back in on your iPhone:
    On your iPhone first, sign back in to iMessage and Facetime.
    Sign back in to iMessage and Facetime on your other devices (if necessary.)
    You can find the steps I quoted above, as well as more troubleshooting help, at this link:
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    Best Regards,
    Jeremy

  • Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

    Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • TS2755 is there a quick way to take a photo and send it from messages application on the computer

    is there a quick way to take a photo and send it from messages application on the computer

    Just the regular way. Take the photo and then open the Messages app and select that photo and send it. That does not seem hard.

  • Updated my software and now I can't send messages from my iphone

    I just updated the software for my iphone and ipad. For some reason, I can't send messages from my iphone anymore, and I can send them from my ipad. How do I turn the iphone messenger back on?
    Thanks!

    After researching the problem on this board, I turned my cell phone off, and waited 5 minutes. When I restarted it, everything worked! Thanks

  • Can we send and receive messages from iMessages ? If yes I am unable to do why plz. Send me the solutions THANKS.

    CCan we send and receive messages from iMessages if yes why I am unable to do it plz.send me solutions THANKS.

    Try reading through these troubleshooting guides for some help:
    If you get an error when trying to activate iMessage or ...
    If you can't send or receive messages on your iPhone, iPad ...

  • My iphone is sending message from my email and not my number. how do i change this?

    My IPhone is sending messages from my email and not my number. how do i change this?
    Thankyou

    is something which imessage does to safe you money so when you send an sms while having a internet connection it send it across the Internet because thats free vs. a sms which cost pr send sms

  • Can ipod touch 4th generation send and receive messages from a phone number?

    I have an iphone number connected to imessage but my iphone broke.  On my mac messages app it allows me to be reached at (my phone number).  Is it possible on the ipod touch 4th generation to send and receive messages from my phone number as opposed to an email address?

    Only if you have an iPhone using with iOS 6 or greater using the same APple ID for Settings>Messages>Send and Recevice.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage

Maybe you are looking for

  • Hyperlink to a file causes FTP error?

    If I insert a hyperlink to a file that is located on my local hard drive, the site will not publish. iWeb says 'error communicating with the FTP server', and contact your service provider, etc.  If I remove the link, everything publishes fine.  I am

  • Interactive PDF–buttons working in preview but not in PDF

    I have a series of buttons that reveal hidden graphics. One of those hidden graphics is a background layer, in a separate layer, that should appear when a button is clicked. It is showing up, but in front of all other content, even though the layer i

  • Unable to view router console

    i am unable to log on to my router to change or view setting , but this is not all the time i am all so running network magic software could this be part of the problem.

  • URL Event cuepoints embedded in live flv stream

    I would like to stream live flv files with on-the-fly embedded cuepoints to synchronize slide shows to the live stream I use the function frequently on on-demand streams, but those are static xml cuepoint lists I understand that it can be done.  I re

  • Newbie: How to install packages from remote desktop?

    Hi, I have installed Solaris using Reduced Network without installing Volume Management. Now, I want to add more packages. I have tried to copy e.g. SUNWmfrun directory from my Windows XP desktop and SFTP/SSH to the remote Solaris server. Maybe becau