Enter Counter reading in work order or time confirmation

Gurus,
Is there a way to enter a counter reading when confirming time on an operation without creating a measuring document with IK11 on a functional location ? Something that would allow a maintenance operator to enter more naturally counter readings in the system upon completing a maintenance taks.
Thanks for your insights,
Olivier

Hi
in general maintenance order is only confirmed with resources consumed.
what is need of conter reading record  at the time of confirmation maintenance order. counter is connected to technical objectsif you explain in detail the purpose of recording counter reading.
any more details please...
thanks& Regads
SIVA RAMAIAH B.V.

Similar Messages

  • Work Order Creation Time

    Hi Guys
    I need a help with a problem here
    Our maintenance guys work in 3 different shifts. We would like to get a report about the workload in each shift
    I was wondering if its possible to get a list of orders with the creation time of each order.
    How can I get this info? The work order creation time?
    Thanks and Regards

    Transaction IW38 will give you a list based on the the date created you would need to create a varaint with a list of the user ID's that belong in each of the 3 shiftes this would then give a report of the orders created by Shift on any given day.
    Alternatively if you wanted to find out the orders on a weekly basis this could be done using the user ID's with a period of time over a week for instance.
    Hope this helps
    Jim

  • Can't read Work Orders through DI Server

    Hi,
    I'm trying to read a work order through the DI server, but I keep getting error 2052 (No Records found). The Work Order #1 definitely exists in the database. Below an excerpt from the DI Server log. Any ideas?
    Thank you.
    11/11/2010  16:02:15  Request
    <?xml version="1.0" encoding="UTF-16"?><env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header><SessionID>E05CB402-4C44-487F-A939-4F3A9B998AC2</SessionID></env:Header><env:Body><dis:GetByKey xmlns:dis="http://www.sap.com/SBO/DIS"><Object>oWorkOrders</Object><OrderNum>1</OrderNum></dis:GetByKey></env:Body></env:Envelope>
    11/11/2010  16:02:15  Response (Fault)
    <?xml version="1.0"?><env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope"><env:Body><env:Faul
    t><env:Code><env:Value>env:Receiver</env:Value><env:Subcode><env:Value>-2052</env:Value></env:Subcode></e
    nv:Code><env:Reason><env:Text xml:lang="en">No Records found</env:Text></env:Reason><env:Detail><OrderNum
    >1</OrderNum><Object>68</Object><Command>GetByKey</Command><SessionID>E05CB402-4C44-487F-A939-4F3A9B998AC2</SessionID></env:Detail></env:Fault></env:Body></env:Envelope>

    Hi Avi,
    Welcome to the forums
    I'm not 100% sure but I think the issue here is that you are using the WorkOrder object which is the old object for accessing production orders. This was deprecated in SBO 2005 and you should be using the ProductionOrders object instead. I think the WorkOrder object is still included in the DI API (and the DI Server) for backwards compatibility reasons.
    Kind Regards,
    Owen

  • Error while generating Work Order

    I have a problem while generating Work orders in SNC.
    I set the configuration as belows.
    <General setting for Work Order generation>
    1.Granularity -> Work Order per Purchase Order Item
    2.Create WOs with Report -> Check
    3.Publish Work Order Upon Creation and PO change -> check
    4.Send Work Order Information -> Upon Agreement and when a Phase Is Completed
    5.Send Production Progress Notification -> When a Phase Is Completed
    <Phase Structure>
    1.Comp. from SC Order -> Use SC Comp. as Input, Product and Co-Products as Output
    <Master Data Assignment>
    1.MD Used for WO -> Phase Structure
    2.Active -> Check
    When I use the program /SCA/WO_CREATE for generate Work Orders, Run time error occurs with below messages.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Except.                CX_SY_REF_IS_INITIAL
    <Error analysis>
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in
    procedure "GET_PIO_LCTYPE" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "LS_NODEREF-R_NODE").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    <Missing RAISING Clause in Interface>
    Program                                 /SCA/CL_WO_PHASE==============CP
    Include                                 /SCA/CL_WO_PHASE==============CM00V
    Row                                     1
    Module type                             (METHOD)
    Module Name                             GET_PIO_LCTYPE
    <Trigger Location of Exception>
    Program                                 /SCA/CL_WO_PHASE==============CP
    Include                                 /SCA/CL_WO_PHASE==============CM00V
    Row                                     45
    Module type                             (METHOD)
    Module Name                             GET_PIO_LCTYPE
    Please let me know what I have to do for this error.
    Thanks and Regards
    JT

    Hi JT
    Clearly the problem is with the method GET_PIO_LCTYPE of interface /SCA/CL_WO_PHASE
    Check whether note 1363834 should be implemented
    It could be because of some corrupted WO entries in database
    or some customizing entry it is expecting
    suggest you to debug the method and try to check what it is expecting
    Best Regards
    Vinod

  • Reader not working on startup/manual run

    Hey guys, I've been unable to get Reader to work for some time now, and it's driving me crazy. I appreciate any help you guys can give me on this matter. Let me tell you the context and all the "symptoms" I can think of:
    Apparently the program stopped working after installing XI on Windows 7 Ultimate (32bit) over a previous version
    The window of the program itself does not say it's not responding, nor on both the task manager's entries for "AcroRd32.exe" in "Processes" or the single one in "Applications" but I still can't interact with it. It "chimes" when I try
    I can no longer preview the pdf files in windows explorer
    Uninstalling/Installing or Clean Installations (using the tool Adobe provides) do not fix the problem, nor erasing the folders manually after an uninstallation
    I cannot disable 'Enable Protected Mode at Startup' manually, since the program does not start, but adding it via script does not help either
    I could not download the program's executable since nothing happened after I clicked it (had to download the zip version)
    The program seems to open the EULA though I can't see it, or interact with it (and when I open the program does indeed "chime" when I try to interact with it, almost like I had to accept the EULA before pressing "a button"). Opening the EULA manually from the folder does nothing
    Firewall protection and Anti-Virus outright deactivation have no effect on the situation
    Microsoft's Fix It application has gone through any errors in the installation/uninstallation process and though I was able to finally remove the previous version, I'm unable to get the program ro properly work after installation
    Administrator privileges have also no bearing on the situation - neither running as one, or enabling everything in the general privileges
    Adobe Cloud is not installed, so cannot be blocking anything
    Putting it on startup gets the exact same result
    Waiting without doing anything after opening is a waste of time, it just stays there as before
    Might be a few more things I can't remember, but I guess they'll come back to me as more people *hopefully* respond. Thanks again in advance, and excuse my poor english.

    Thanks for answering.
    Adobe - Adobe Reader : For Windows : Adobe Reader 11.0 - Multilingual (MUI) installer
    I was able to install it from this link over here, but I was unable to do anything with the one downloaded from here: http://get.adobe.com/reader/
    Clicking on "install_reader11_en_ltr5x32d_awc_aih" did nothing for me.

  • Work Order Serialized Component Reservation

    Can I enter a serialized part on a Work Order?  We are a manufacturing company and have many parts in Stores that we plan to serialize.  When a part (eg. motor) on the shopfloor breaks a Work Order will be written to replace the motor with a refurbished, serialized one in Stores.  I need to be able to issue that part.   The Work Order let me enter it under Components, but when I ran MB26 to release the reservation and Issue the part, it said I needed to enter a Serial Number.  However, there's no where on MB26 or on IW31/IW32 to enter a Serial Number.  Where's the right place and/or what's the right process for this?

    Hello Kris,
    If I understand you correctly, you are looking for a field to enter serial number in work order, if so, then please configure the subscreen of reference object.
    SPRO
      -> Plant Maintenance and Customer Service
       -> Maintenance and Service Processing
         -> Maintenance and Service Orders
          -> Functions and Settings for Order Types
    Configure Order Types
    in the bottom of screen in detial order type, there is a field Screen RefObject
    you can select reference object screen which contains serial number field.
    Regards,
    Jane

  • IW38 How to show Work Ordre Creation Time

    Hello,
    In IW38 - List of Orders, how can I display Work Order Creation Time in the ALV?
    This choice is not available in the list. However, it's possible to display notification creation time (Notification time field) in IW28.
    Thanks,
    François

    François Rocheleau-Lieutenant
    Try appending the same field to the IW38 structure RIHAUFK_LIST
    PeteA

  • Service order creation based on counter reading assigned to the Ibase.

    Hi All,
    I've created a service contract (ZXXX) with the item category (ZIT1) of service plan.
    In the item category (ZIT1) definition i've copied the standard item cat. of service plan (SPLA) and assigned the standard date profile SERVPLAN to the item category.
    Requirement - Service order has to be created automatically if the counter reading assigned to the Ibase is greater than counter reading that is maintained in the service plan template that is assigned to the service plan product(Item) in the service contract transaction.
    Master Data -
    Service Interval Template - Created service plan template for counter based interval and maintained the interval as 100HR.
    Assigned the template to service plan product(item) which is assigned in the service contract.
    Created a counter ID and assigned the counter to the Ibase.
    In the item date profile SERVPLAN , I've assigned the date rule (Planned time based on the counter reading) to 'Release date' date type.
    In the item action profile ., Action is defined as it should create a service order (ZSER) with the template defined in the item if the (Release date =< today's date) as start condition.
    I've maintained the complete master data.
    Now Release date should be picked based on the counter reading of the Ibase assigned to the service plan item in the service contract.
    If Ibase counter reading > counter reading maintained in the interval the release date = todays date.
    If Ibase counter reading < counter reading maintained in the interval the release date = future date.
    which is not happening now in my case. service order is getting created even the counter reading of Ibase is less than the interval.
    Please let me know if further more changes to be done to map the scenario.
    Thanks
    Syam

    Hello,
    I found the following:
    If you fill someting in the fields REFOBJ_IBASE, this value is being converted into a GUID internally
    This happens in function CRM_BSP_OIC_1O_SEARCH_FROM_RF
    So you have to make sure that the search field REFOBJ_IBASE points towards the field CRMD_SRV_REFOBJ~GUID_OBJECT ( via table CRMC_REPDY )
    And even then I have the impression it only works when you only fill the Ibase in the order. When you fill the component there is a different GUID.
    In my case I found out it is even more complex, so I will need to create my own search field (extend search structure )
    Regards,
    Erwin

  • Hi can anyone please help me! My I phone is in recovery mode i lost it and it was returned to me fully working. I ran an update and it shut down. I have loads of pics and vids of my little girls including my youngest counting to ten for the first time.

    Hi can anyone please help. My I Phone is in recovery mode. I have loads of pics and vids including my little girl counting to ten for the first time.
    Can I recover these files or have I lost them? I lost the phone last week and it was returned working but with an update to install I did this and it shut down.
    If anyone can please help I would be eternally in your debt I have loads of sentimental pctures in here but cant get to them.

    Sorry, but if it's in recovery mode, anything on the phone is already gone. If you had PhotoStream turned on, hopefully the photos will still be out there.
    You have no choice at this point but to restore from your last backup.

  • Error in File IC Work Order Report_v3-3: Max processing time or Max records

    Hello Friends,
                          While running the Crystal report in Business Object Infoview, I am getting the below mentioned error when i am trying to go to the next page or trying to export all pages of report into PDF and any other format. I can see the first page in output and can export 1st page into PDF.
    2010-12-29 17:28:05
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File IC Work Order Report_v3-3:
    Max processing time or Max records limit reached---- Error code:-2147215357 Error code name:internal
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.getPage(Unknown Source)
         at com.businessobjects.report.web.event.q.a(Unknown Source)
         at com.businessobjects.report.web.event.q.a(Unknown Source)
         at com.businessobjects.report.web.event.bq.a(Unknown Source)
         at com.businessobjects.report.web.event.bt.broadcast(Unknown Source)
         at com.businessobjects.report.web.event.ak.a(Unknown Source)
         at com.businessobjects.report.web.a.p.if(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.if(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.do(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
         at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
         at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
         at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
         at java.lang.Thread.run(Thread.java:595)
    Please Help.
    Thanks,
    Ziad Khan

    Ok it looks to me that there are more than 20000 rows in your backend system that have to be fetched.
    You can change this limit in the Central Management Console . Login as administrator and go to Servers . Double-click on the Crystal Processign server and change the value in the field Database Records Read When Previewing or Refreshing (0 for unlimited) according to your needs. AFter the change you have to restart the Crystal processing server.
    Regards,
    Stratos

  • Have the developers considered randomizing the numbers for the passcode?  It is easy to watch the pattern when someone enters their passcode.  However, if the numbers appeared is a random order each time, it would enhance the security feature even more.

    Have the developers considered randomizing the numbers for the passcode?  It is easy to watch the pattern when someone enters their passcode.  However, if the numbers appeared is a random order each time, it would enhance the security feature even more.  Personally, I would prefer this option with security in mind.

    He slightly beat you Meg, and I'm in the same boat with you. If I used a passcode I believe I would go with the feature to use a longer alphanumeric passcode rather than a 4 digit number even with the random code entry.
    And of course if Apple did put this feature in they need to make it an option or we'll see lots of posts wanting to know how to get rid of it.

  • Work order to consume time only

    Hi all,
    Is there a way in SAP to release a work order to consume time only?
    For example if a tub of parts is to be sorted how do we release an order for someone to book time against?
    Cheer,
    Chris

    You can create an order without material, and define in the operation the relevant work center and time that you want to book.

  • When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers.  Sometimes it works, but most times not...very frustrating.  Any recommendations?

    When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers.  Sometimes it works, but most times not...very frustrating.  Any recommendations?

    Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)

  • I have a Mac Mini, and it won't accept connecting my Sony video camera.  So I got a SD mem card reader to unload my movies from.  It worked the first time I used it a few months ago.  This time it says it doesn't recognize the format I am trying to use?

    I have all thenecessary updates.  I have switched over from a PC to Mac back in April and have nad nothing but problems adapting.  I don't know why this worked the first time, and put my videos inti imovie, and now it doesn't recognize it at all.  And the Mem card reader does work, because I just put the SD card from my regular camera into it and it downloaded those fine, it just won't take my movies!

    Which sony camera? I have a Sony HDR-CX550 right now and have been able to use the SD card as well as connect the camera directly. I also had CX110 that work too. You may want to try to copy the complete top level folder from the SD card to the Hard drive, then try to "import from Camera archive" and select that folder.

  • To know the closure time of a Work Order

    Hi,
    I have a query wherein I would like to calculate the time a Work Order or a Purchase Order took to Complete or close.
    Kindly tell me a standard report or a way out to know it.
    Also if I would like to know the average time taken by the orders placed in my campany to get closed.
    Regards,
    Puja

    HI Puja,
                 can you please be specific in your requirement, as the PO and The maintenance or Production orders are different.
    what actually is your requirement.
    if you want to know the timing of the work order then you can check them in the start and the finish time, and Purchase Order can be calculated from final release to the GR date.
    Hope it helps you.
    Regards,
    yawar Khan

Maybe you are looking for

  • I got a new laptop this summer and now my iPhone 4s won't stay syncing to iTunes on it when I use the usb cord. What do I do?

    I went from a toshiba to an hp laptop. My iPhone 4S connected to it originally but now i can't get it to stop connecting and unconnecting long enough for it to sync properly anymore. I've tried a number of different cores to get it to work but it doe

  • New MBP and old PBG4 don't share Airport connection well.

    Hi - My 2 laptops are both on a wireless network via a Snow ABS. They don't seem to be able to share the signal. If one computer is downloading a file, the other one won't be able to connect to the internet. Without knowing exactly what I'm talking a

  • From dw mx 2004 to dw cs4

    Hello, I'm planning to upgrade from dw MX 2004 to CS4. My sites rely on dw MX's Library items. I don't use templates though. Will CS4 work flawlessly with dw MX's library items? Also, does CS4 play well with SourceGear Vault?

  • How do I pin the DW properties panel to the bottom of the editor?

    I use the Accordion widget quite a lot, and to edit it I use the Properties panel. Until recently, it had been pinned to the bottom of the DW editor. However the techs at Adobe, in their infinite wisdom, decided to change it into a free floating pane

  • Won't accept computer serial number

    I have completed the registration process up to the point where the software asks for the serial number of my computer.  I am reading the S/N directly off of the bar code tag, but it comes up as invalid.  I have tried both upper and lower case.  Help