Enter intervals without overlap

Hi Guys,
While i am trying to giving the number range in (FBN1), i am getting this is error " Enter intervals without overlap" i tried so many number ranges but i didnt solve the error, can you please help me on this.
Regards,
Shekar.v

hi, shekar,
can u elaborate the problem further.
as far as i kno in FBN1, u need to maintain the no ranges with serial no.
ie
from MM point of view 49(GI & TP), 50(GR w.r.t PO), 51(invoice)
now u maintain these no ranges gi to new line item add a new no. range. and go to drop-down, it wll give u the no. ranges available to u. select 1 frm them.
hope it wll help u.
Regards,
yk

Similar Messages

Error in Inserting Interval in T.code FBN1 -Enter intervals without overlap

Hi,
I was doing Account to Releasing through VF02, then I got the error message Incorrect doc.no.: 2009750001. Select document number between 2010000001 and 2010999999.
In FBN1, when I try to insert the number range, it shows up another message,"Enter intervals without overlap"
Please advice what to do.
Thanks and Regards

Hi,
Your no range is overlapping may be because of -
(1) You are trying to manually put no range which already exist or
(2) Check no & year; it may also overlap or
(3) May be your all no range are in use, so you have to delete no range
You can do another thing
Go to billing document (VOFA) & assign proper no range
Regards
Santanu Giri

Drag and Drop without Overlapping.

Can anyone give me direction on using 'drag and drop' in flash without overlapping?
For example - I have a list of buttons i drag to an area on the stage.
I do not want my buttons to overlap.
Any ideas? Tutorial / example... anything - I'm new on this and i'm in a crunch.
Thanks,
Jackie

Hi kglad,
Thanks for your response.
Are you available online? Im not even sure if i'm allowed to ask that on here =/ ... im really new to the forum.
My MSN is [email protected]
Skype: jackie_parks
I'm so stressin' about this issues, was wondering if you might look at my project with me?
Thank you very much.
Jackie

How to make text fields grow dynamically without overlapping the text below it?

Hi..I'm a newbie to Adobe Livecycle and I need a create a form that has a textfield that should grow dynamically and expand without overlapping the text below it. I tried using subforms, saving as Dyanmic PDF, checking expand to fit option but nothing seem to work! I really need help designing this form.

Thanks for the reply. Yes I did but still didn't work out well. I'm trying to add my pdf form as an attachment here but I'm unable to do it! Where do I find add attachment option?

Mult channel plot without overlap & show special data points after analysis

The program need to display "n" channel data on a graph without overlap. [I plan to use xy chart & add offset to each channel to separate each channel.] After that an analysis program will run and then "I want to mark the specific points on some of channel, for example make cross on 2 specific point on 2 different channel" How can I mark the points?

You would want to use cursors. There's a simple shipping example with LV 7 called Cursor.vi that uses Cursor.PosX and Cursor.PosY property nodes to place them. Another way is to use Cursor.Index. This can be convenient if during your post processing, you return the array index of the data you're analyzing. With other property nodes, you can control cursor color, style, etc. With the ActCursor property, you assign a cursor to a specific plot. Right click on your graph and select Visible Items>Cursor Legend to see how how you would do it manually.

Drop down without overlaping

how to make drop down menu without overlaping the links below?

I do not see overlapped links on the page.
Anyway, the pages I referred to show how to avoid that.
You can download an iWeb domain file, including all additional files, for study and practice.
I general I would say that none of the solutions that were offered to you for the problems you had over the years never materialized on your pages.
So why exactly do you ask these questions when in reality you do nothing with the answers.
And why don't you just study the noble art of webdesign.

Behind Router and Switch, Can't Enter URLs Without Dot-Com

Hello all,
I switched my networking situation this morning and now I've lost my favorite feature...the ability to enter URLs without a .com and have Safari auto-complete them. Here's my setup:
Wall->modem->D-Link Wireless-G Router->Netgear Gigabit Switch->iMac
Before, I just had my iMac connected directly to the modem, but now I have some new devices that I needed to network in. The Internet and everything else is working correctly, it's just that one thing that really bothers me. I've thumbed around through manuals and D-Link's router settings and I can't seem to find the giant on/off switch switched to off. Any ideas? Help?
Thanks!

Mateo wrote:
Before, I just had my iMac connected directly to the modem, but now I have some new devices that I needed to network in. The Internet and everything else is working correctly, it's just that one thing that really bothers me. I've thumbed around through manuals and D-Link's router settings and I can't seem to find the giant on/off switch switched to off. Any ideas? Help?
Based on your description of the change, my guess is that your iMac used to deal with Time Warner DNS directly and now it may be using the DNS routing settings in the D-Link. As the former owner of a D-Link I would guess you might go look in the WAN settings for the DNS field on the D-Link (in the browser-based configuration utility) and make sure the IP address there matches whatever you had entered in the DNS field in the Network settings on your Mac.

How to enter HRA without maintaining the infotype 0581

Hi Friends,
We would like to maintain HRA without entering the value in 581 infotype.
But it not allowing us to maintain like that..can any body let me know the dynamic action is existed for this.
Any body can help out on this..
rewards will be given for the helpful answers.
Thanks
Nanditha

FYI
The authorization of a country grouping for an infotype and type is specified in table T582L Infotypes - Country-Specific Settings.
Maintain T582L for IT0581.
Thanks.
Saquib

Drag and Drop Learning Interaction without Overlapping

I would like to be able to drag and drop into a column without dragged items overlapping for a quiz question. I don't know Action Script and am using CS3. What do I need to do to get this to work. Component Inspector states Drag1 = Target 1, etc. I need to drag the items to any of targets 1, 2, and 3. Hopefully, someone out there can help me.
Thank you.
Laraine

Thank you for your reply. Your idea of a boolean variable to define the state of the response is what I was initially trying to accomplish. Almost as soon as clicked on 'submit', the thought occurred to me to look for action script in the drag/drop component. I found it and found the response states defined there. Consequently, I achieved external movie clip control. I'm new to this forum and appreciate your help.

BAPI/FM ( tran MI09) to enter count without ref. to inventory doc

hi,
I wanted a function module/BAPI that can be used to enter count for physical inventory WITHOUT reference to inventory document(transaction MI09)
I found a BAPI to enter count for physical inventory with reference to inventory document(transaction MI04) but unable to find one without reference to Inventory document number .
please help me regarding the same

Hi Balaji,
Please refer the link,
require function module for transaction MI09
Regards,
Hema.
Reward points if it is useful.

Facing problem in saving data without overlapping in for loop

Hi,
I am facing problem in writting data withou overlapping if i run outer loop for 2 or more times and in inner for loop i am getting array in a way I want but when i try to build that array with logging temperature i am not able to do it. Please guide me through ths.
Thank You
Hnagpal
Solved!
Go to Solution.
Attachments:
data storage.vi ‏31 KB
what i am getting.xlsx ‏10 KB
what i want.xlsx ‏10 KB

Thanks odessy27, Matthew Kelton, for replying.
Matthew Kelton: Thanks for the solution i am adding outer loop so that i can increase the number of row. I am using it for some application which require me to save data several time and i used random number here but originally instead of random number there will be power meter reading and i want to save it every hour and plot it. I am also attaching a file what i made I don't know is this a good way or not. Actually i will also beneeded to plot a graph. But again how to increase a row and without replacing previous data i can write another row.
Yes i want to make one row for each iteration.
I attached both files in 2009 version.
Thank You
Himanshu Nagpal
Attachments:
desired result.xlsx ‏10 KB
data storage (1).vi ‏26 KB
data storage.vi ‏37 KB

Please guide to enter iTunes without creditcard

I am newly user a apple ipad2 , I enter I'd and pw to registered a new one but in the colum of payment we don't have a none option column ,so I could not enter a iTunes free site and downloads and all applications so please hoe to registered that column please guide me

Create iTune account without credit card
http://support.apple.com/kb/ht2534

Safari not connecting when entering website without

This is really weird but I want to know if anyone else is having this problem since upgrading to SL. When I enter a website "apple", the internet does not connect me to the website. I remember clearly that the sites would work when excluding "www" and ".com".
Anyone else having this problem?

I've noticed the same issue. Prior to SL, I was able to type in anything into the domain window without adding .com, .org, .edu, etc.. and it would quickly go to the site. (example: I typed in "gmail" and it would take me to gmail.com) Now, if I do not add the .com when typing, the status bar shows "looking up gmail..." and it takes forever to load, if it loads at all.
I have noticed that sometimes it will load certain pages that I visit frequently with better success, but not all the time. But for the most part it's extremely slow when you don't add .com, .org, etc.
This was not an issue when I was running leopard.

Enter BIOS without kbd?

Hi,
Is there any way of entering the BIOS without using the kbd?
I ask, as the PS2 connections do not seem to work.
Is USB kbd enabled by default ??, so I can get a PS2 to USB adapter to try out.
The m/c boots on a W98 diskette, so the CPU appears to be working OK.
TIA

You need a keyboard. Are you sure you are plugged into the correct USB port.
Hard to say about the USB route. Some boards do, some don't.

Timed counter in a while loop without overlapping a second while loop

Hello,
Like you can see in attached file (waveform_counter.vi), I have a main while loop which makes a waveform graph and I would like to integer an inversed counter (from x seconds to 0) in some cases. I tried with a overlapped while loop, but obviously, when the counter works, the main loop breaks...
How can I make a sort of time counter without a loop ? I tried with the while loop iteration, every 100 iterations the counter decreases but I don't success.
Thanks for help.
Nathalie.
Attachments:
waveform_counter.zip ‏55 KB

Hello Nathalie:
Please see what I did in the expiration case.
Please advice if this is a possible solution.
Attachments:
waveform_graph 2.zip ‏41 KB

Enter intervals without overlap

Similar Messages

Maybe you are looking for