Enter key doesnt work in SQL developer

enter key doesnt work in sql developer so cant creat new line in code.
enter key works fine when use word etc
Can I fix this in the SQL developer settings somewhere.?
thanks in advance.

Hi Sue,
Just to let you know, your solution worked... My SQL Developer got into a state again where the backspace key stopped working... doing 'load preset, default' on the accelerators did fix it. Strange, because I don't use/configure the accelerators at all. Thanks for that, and hopefully this will be permanently fixed in the next version.
To echo what I think someone else was trying to say... I also have the issue that sql developer will 'lock up' or get bogged down sometimes, when i'm just typing away in the worksheet. Any keystrokes I entered in though will always get entered into the worksheet, once sqldeveloper 'unfreezes' itself. Of course, this issue is an annoyance factor only (little bit of impact on productivity though), but hopefully it gets fixed as well.

Similar Messages

  • My enter key doesnt work

    heyy!! my issue is abit different. Before I used to hold alt down and use the character that i needed. Now i have to let go of the key and type. Its very annoying. I have tried wipe and master reboot!! Nothing works.. Also to top it all.. my enter key doesnt work... im constantly texting and bbm'in but i cant use enter i have to use the centre button!!! im soo frustrated. my phone is out of warranty...  .. im very upset.. i used to be inlove with my phone!! its a curve 8520 

    Just plugged my wired keyboard in and it works. very strange, seems very unlikely that the only broken key is the enter key mhm. expect the unexpected. will contact the apple support on monday cause i live in germany and they dont work 24/7

  • Enter key doesnt work in url line

    enter key doesnt work in url line. only i have to pick go button with mouse

    # Click the orange Firefox button and select Add-ons to open the add-ons manager
    # In the list of extensions click on AVG Safe Search to select it, then click the Disable button
    # Restart Firefox

  • Backspace key not working on SQL Developer 3.2.20.09 on Mac OS X 10.7.4

    Hi,
    I've searched around and found that the backspace and arrow key problem has been a known issue on 1.x versions of SQL Developer. In that version the fix was to reload the keyboard Accellerator bindings in Tools->Preferences->Accellerators. However, the Accellerator dialog isn't available on 3.2.2 version. Is there any other way to fix it? I know on some Macs, the keys work fine.
    Thanks,
    Richard

    Hi Richard,
    The Accelerator feature was renamed. Rather than
    Tools->Preferences->Accelerators -> Load Presettry instead
    Tools->Preferences-> Shortcut Keys -> More Actions -> Load Keyboard SchemeHopefully reloading in 3.2.2 will have the same impact as in the 1.x releases for your issue.
    Regards,
    Gary
    SQL Developer Team

  • MouseClicked event = enter key doesnt work

    Hello,
    when I make some JButoon and add to it MouseClicked event (witch handles some code) everything works fine. But when I mark it with TAB then press ENTER button wont "doClick".
    So I found out that actionPerformed might be the right handler, but I dont understand why there is also mouseClicked event?
    Is actionPerformed event what I need (to work either with LMB or ENTER key) ?
    Are there any disatvantages of actionPerformed event comparing to mouseClicked event?

    The spacebar, not the Enter key, is the default keyboard trigger for a button that has the focus (and not just in Java).
    If you really want the focused button to respond to the Enter key, search this forum for"DefaultButtonFollowsFocus".
    db

  • All of a sudden my Enter key no longer works in SQL Developer.

    All of a sudden my Enter key no longer works in SQL Developer. I don't know how I managed to disabled it. Can anyone tell me how to re-enable it?
    I already tried the following:
    - I closed the application and re-opened it. - It didn't work
    - I re-started my machine. I didn't work
    Help! Thank you

    The same thing has just happened to me and this was very useful to correct the problem --- but now I am wondering why or how this happened. To the best of my knowledge, I haven't make any setting changes so why did I lose the Enter action?

  • (Substitution Variables) not working in "SQL Developer" Environment !!!!!!!

    this photo illustrate how that (Substitution Variables) not working in "SQL Developer" Environment :-
    http://www.imagehosting.com/show.php/1555180_ddddd.PNG.html
    any solve for this problem ?????!!!!!!!!!!

    There is a dedicated forum for SQL Developer related questions
    SQL Developer
    I should admit however, that query you have provided ( with substitution variables) works like a charme in my environment (SQL Developer 1.1.0.23 build 23.64)
    Best regards
    Maxim

  • File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

    File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
    I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
    Thanks

    I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
    Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
    I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

  • Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

    why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
    The current bios version is F.07

    korpx,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • The cap lock key doesnt work sometimes, why? 13 pro(2013, late)

    The cap lock key doesnt work sometimes, why? 13 pro(2013, late)

    Hi, BOSCO_LIN. 
    Here is a helpful article that will walk you through troubleshooting the issue with your caps lock not responding.
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Regards,
    Jason H.

  • Showing product key doesnt work

    Hi, my name is varun, I bought my laptop (G6 pavilion 2320tx) one and a half year ago with inbuild windows 8 in it, 2 weeks earlier i refreshed my laptop. Now its showing "Activate Windows, This product key doesnt work".  What should I do......

    Try Factory Reset:
    http://support.hp.com/us-en/document/c03546603
    Else HP System Recovery should work:
    http://support.hp.com/us-en/document/c03489643
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • L key doesnt work

    yo what up yaLL got a new bLack macbook for the hoLidays and the Lowercase L key doesnt work onLy the upper case L works i wanted to post on here to see if it was just me being an idiot and i can fix it or i need to take it to get serviced. any heLp at aLL wiLL be appreciated thank you

    so u think i shouLd take it to have it fixed. is there anyway i can get appLe to throw in some goodies for my inconvience. you wouLd think it wouL be that big of a probLem but it is reaLLy annoying. aLso how Long do u think it wouLd take them to perform this service and if i got the computer at compusa and got the extended warranty from appLe do i have to take it there or can i take it to the appLe store where i wouLd think that they wouLd be quicker

  • Working on SQL Developer / pl/sql developer without installing Oracle

    HI,
    I am working on SQL Developer tool without installing oracle into my local machine.
    I just took server IP as hostname and continuing with the same/
    Now, since I donot have tns names, I am not able to use any other user other than my work related.
    like scott etc.
    could anyone let me know, is there any way that i can work on sql developer or pl/sql developer without installing oracle into local machine
    like using scott etc...
    for testing and learning purpose of self code.
    thanks in advance.

    VBSK wrote:
    I am working on SQL Developer tool without installing oracle into my local machine. You need an Oracle client driver - this is mandatory.
    No, you do not need a TNS alias (as the connection string can be build manually by the application and the driver).
    So SQL*Developer needs to have an OCI (Oracle Call Interface) client driver. This can be "installed" using Oracle Instant Client.
    Instant Client does not really install - to use it takes 3 basic steps:
    - download it (zip file)
    - unzip it to a directory (e.g. C:\InstantClient on Windows)
    - add to your Windows User's environment an ORACLE_HOME variable that points to this directory
    These steps should suffice in making the driver in in Instant Client available to Oracle applications. (works for me running an Oracle OCI client like <i>Mumbai</i> or Oracle's <i>SQL Data Modeler</i>).
    If you want a tnsnames.ora file, then create the file and create a new environment variable called TNS_ADMIN that refers to directory location of the file. It can use the same location as your Instant Client directory.
    PS. I assume you have an existing Oracle server to connect to.

  • How do I enable the "fn  + enter" key to work as an "insert" function for windows on my mac laptop?

    how do I enable the "fn  + enter" key to work as an "insert" function for windows on my mac laptop?

    enable /disable function within the Bootcamp control panel within Windows Vista or 7

  • I suspect work of SQL Developer after connect

    what want about work of SQL Developer after connect ?
    Thank you very much

    Not really my area, and not really a SQL Developer question, but it's using a standard Java SQL connection in this case.
    If you do not supply the DNS suffix (perhaps as a suffix to the host or service name), then it must get it from somewhere, probably some OS configuration. For example, on Win XP, I see this from a Cmd console window...
    ipconfig /all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : <myhostname>
            Primary Dns Suffix  . . . . . . . : us.oracle.com
            Node Type . . . . . . . . . . . . : Hybrid
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : us.oracle.com
    ...Hope that helps (and corrections welcome),
    Gary

Maybe you are looking for

  • Multiple Public IP's on one physical interface for devices behind Router.

    Hi guys, I am trying to find information on applying multiple IP addresses to a router basically one for the Router itself and then some for the devices behind the router, Which i am sure I need to apply some 1 to 1 NATs. I just do not know if i need

  • How to catch error records while inserting

    hi all, i am trying to insert some records in my function where i need to catch the records that are not inserted due to some data incosistencies. i am using a cursor that has the data. can you please let me how can i accomplish this .below is the pa

  • Async Client proxy -PI - File scenario- Pipeline steps missing in SXMB_MONI

    Hi I made a scenario where an ABAP client proxy(in a BW system) pulls data from a BW table and push it to PI. In PI a Mapping is done to write an XML file and sump it to a desired location. It is working fine in the development environment(request se

  • Unibody 15 " january 2009....screen goes black, won´t start/react

    I have got this problem: Working on the computer, screen suddently turns black. Computer still running i think as there are fan-noise. This happens totally unpredictably, only thing to do is force quit by holding power button. I saw the thread below

  • OPM implementation in Pharma Industry

    Hello All I am looking for information (case studies/white papers/others) on OPM Implementation in Pharma industry primarily to learn : - How active drug mfg & formulations mfg was mapped to OPM - Business requirements that could be fulfilled by stan