Enter Key

I have a chart in a fillable PDF form built in Acrobat Pro X that functions using JavaScript. Unlike any of the other charts and fields in the form, this chart doesn't recognize the Enter key to submit and answer or tabulate a calculation. Any thoughts on a fix??

Could it be set as a multi-line text field? In that case, Enter would just insert a line-break into it.

Similar Messages

How to refresh changed data in a plannable template with the Enter Key

Hi,
The situation I face is as follows.
Integrated Planning is being implemented as a tool for budgeting. The user changes a value in a plannable cell on the portal and wishes to see the new updated data by pressing ENTER. Currently we have provided a REFRESH button so that the user gets the desired result.
Is it possible to see the updated value by pressing ' ENTER' and if so , whats the way around to do it.
thanks in advance.
Jaya

Hey guys,
I'm interested too in this solution. In BPS there is an additional function described in the HowTo Paper HowTo run planning functions on save and other events
Now I'm looking for this possibility in IP as well in excel-based IP and web-based IP. For example a copy function should be executed automatically when pushing the enter key.
Thanks a lot!
Clemens

Table Control[Accept Input Only] - "ENTER" Key

Hi Folks,
I'm reviving this unanswered thread in relation to table control: when the user press enter, all the values entered disappear.
[url]Re: Table control (Enter key)[url]
I have a table control that accepts "ONLY" input, meaning to say, there will be no pre-loading of data in the PBO, so it will loop through the table control itself instead of looping from an internal table.
Issue: Whenever I press "ENTER" in any column/row of my table control, ALL the values I entered disappear.
PBO:
PROCESS BEFORE OUTPUT.
MODULE CLEAR_OKCODE.
MODULE LOAD_TABLECTRL.
LOOP WITH CONTROL TC_DATA.
    MODULE READ_DATA.
ENDLOOP.
module READ_DATA output.
READ TABLE T_DATA INTO WA_DATA INDEX TC_DATA-current_line.
data : line_count type i.
"to increase the number of lines in table control dynamically
describe TABLE t_data lines line_count.
TC_DATA-lines = line_count + 10.
endmodule.
PAI:
PROCESS AFTER INPUT.
LOOP WITH CONTROL TC_DATA.
    MODULE MODIFY_DATA.
ENDLOOP.
module MODIFY_DATA input.
WHEN 'CREATE'.
"subroutines are here, etc.
WHEN 'DELETE'.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
endmodule.
In my ABAP Debug, the value of SY-UCOMM is BLANK whenever I press Enter.
Thanks.

Hi
Your code seems to be rght only the MODIFY statament is useless:
module READ_DATA output.
READ TABLE T_ID_CHECK INTO WA_ID_CHECK INDEX TC_ID-current_line.
IF SY-SUBRC EQ 0.
    ZQID_CHECK-WERKS = WA_ID_CHECK-WERKS.
    ZQID_CHECK-MATNR = WA_ID_CHECK-MATNR.
    ZQID_CHECK-LICHA = WA_ID_CHECK-LICHA.
    ZQID_CHECK-LIFNR = WA_ID_CHECK-LIFNR.
ELSE.
    CLEAR ZQID_CHECK.
ENDIF.
endmodule.
Now before LOOP of PBO try to set the lines of table control to be display, I've created this report on my system and it works fine:
.CONTROLS T_CTRL TYPE TABLEVIEW USING SCREEN 100.
DATA: BEGIN OF ITAB OCCURS 0,
          WERKS LIKE MARC-WERKS,
          MATNR LIKE MARC-MATNR,
          LIFNR LIKE LFA1-LIFNR,
      END   OF ITAB.
DATA: WA LIKE ITAB.
START-OF-SELECTION.
DO 4 TIMES.
    ITAB-WERKS = '5010'.
    ITAB-MATNR = '1234567890'.
    ITAB-LIFNR = '0000000001'.
    APPEND ITAB.
ENDDO.
CALL SCREEN 100.
PROCESS BEFORE OUTPUT.
MODULE SET_T_CTRL.
LOOP WITH CONTROL T_CTRL.
    MODULE READ_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL T_CTRL.
    MODULE MODIFY_DATA.
ENDLOOP.
MODULE SET_T_CTRL OUTPUT.
DESCRIBE TABLE ITAB LINES T_CTRL-LINES.
ENDMODULE.                 " SET_T_CTRL OUTPUT
MODULE READ_DATA OUTPUT.
READ TABLE ITAB INDEX T_CTRL-CURRENT_LINE.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING ITAB TO WA.
ELSE.
    CLEAR WA.
ENDIF.
ENDMODULE.                 " READ_DATA OUTPUT
MODULE MODIFY_DATA INPUT.
MODIFY ITAB FROM WA INDEX T_CTRL-CURRENT_LINE.
IF SY-SUBRC NE 0.
    CHECK NOT WA IS INITIAL.
    APPEND WA TO ITAB.
ENDIF.
ENDMODULE.                 " MODIFY_DATA INPUT

Buttons and enter key problem

hello,
there are a few projects of enterprise quality which I am developing in java swing. I found out through research that many or rather most people involved with java believe that swing is ready for enterprise class robust desktop applications.
so I as the team leador am starting my new projects in java swing.
I personally find that the amount of java libraries present provide a rich set of functionality and it gives big mussle power to the developers.
I am only concerned about one problem which many of you might have solved.
I find that I have to hit the space bar instead of enter key to fire an action. in languages like vb I can press enter key to fire the click events. specially in menu items I certainly don't expect my clients to press the spacebar. besides there are many people who are so used to the keyboard and enter key in particular that it will be hard or rather next to impossible to change their habbits.
how can I make the menu items work with the enter key. I mean do I need to create the code for keypress events every time I also create an action performed method? or is there a way where I can do it without extra coding.
it is just that I don't want to right extra code for enter key along with click events.
one more important note.
I am a blind person and I use the access bridge technology of java.
so when I am involved in coding, I use the same.
so may be my problem isn't a problem in the first place.
kindly provide me some help
thanks
Krishnakant.

The enter-key works on menu-items in all my applications. It did so since I started with java few years ago.
Maybe some other problem (OS-specific) ?

Enter Key is not being accepted properly in the Applet

We have developed a Telnet application which is in form of an Applet. We are facing some problems with respect to that.
We are using Java 1.2.
When login sessions are launched, the login prompt is displayed.
After we enter the user id and press the "Enter" Key, the UI remains at the "user id" prompt and is not accepting the "Enter" Key.
As a result, we are not getting the password prompt and hence NE UI is not deing displayed.
This was verified with logs and found that the "Enter" key was interpreted as "char 7" instead of Ascii char 10(Enter Key).
This problem was observed in both IE and Netscape.
But this same code works fine when it is run as a Java application. Also the same applet works fine when viewed from the Applet Viewer.
Iam of the view that the issue may be due to the restrictions imposed by the browsers on the Java Applet.
Please give me suggestions to circumvent this problem ,if u have faced the same.
Thanks in advance,
Darshan

The reason why ENTER doesn't work is because it's reserved for the default button. The SPACEBAR does what you want.
http://java.sun.com/j2se/1.4.1/docs/api/javax/swing/doc-files/Key-Metal.html#JButton
To change the key mappings, read up on JComponent.getActionMap(), JComponent.setActionMap() and the ActionMap class.

LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Hi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a®

Action for ENTER KEY is not working in alv grid output (Classical)

Hi Experts,
I have searched SDN around 8 hours and could not get any help on my below issue.
I am developing ALV report using function module (Classical ALV). ALV output has 4 input enable fields, if user enters data in any of those fields and clicks on enter button from key pad..the remaining fields needs to be filled automatically.
I am facing the issue with enter key, even if i press enter key in the output there is no action and hence no user command triggered. May be i am using wrong funcion code in wrong way.
Could any one tell me what function code can we assign for ENTER action in PF-STATUS?
Regards,
Murali Mohan

Hi
Try this simple code, it works fine:
TYPE-POOLS: SLIS.
DATA: BEGIN OF ITAB1 OCCURS 0,
       BUKRS LIKE T001-BUKRS,
       BUTXT LIKE T001-BUTXT,
      END OF ITAB1.
DATA: GT_FIELDCAT   TYPE SLIS_T_FIELDCAT_ALV,
      GT_REPID    LIKE SY-REPID.
START-OF-SELECTION.
SELECT BUKRS BUTXT INTO TABLE ITAB1
     FROM T001.
END-OF-SELECTION.
GT_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME     = GT_REPID
      I_INTERNAL_TABNAME = 'ITAB1'
      I_INCLNAME         = GT_REPID
    CHANGING
      CT_FIELDCAT        = GT_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM       = GT_REPID
      I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
      I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
      IT_FIELDCAT              = GT_FIELDCAT
    TABLES
      T_OUTTAB                 = ITAB1.
FORM USER_COMMAND USING R_UCOMM     LIKE SY-UCOMM
                      RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'ENTER'. MESSAGE I208(00) WITH 'Pressed ENTER key'.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "USER_COMMAND
FORM SET_PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'LIST_ALV' EXCLUDING RT_EXTAB.
ENDFORM.                    "SET_PF_STATUS
Max

Submitting a form with enter key causing strange problems

I am having a very strange problem with a webapp I am currently developing. I am using JSF 1.2 along with Facelets and RichFaces. I have coded a workflow/wizard 4-step process, and on some pages I have 4 submit buttons that all call different actions on the page. The users thought it would be useful to have the enter key submit the form, so I followed some online resources to trap a keypress using javascript, looking for the enter keycode and calling document.getElementById("elementName").click(). This works fine most of the time. Sometimes, though, it seems as if an entire new session is being created, and odd behavior starts happening. For example, my page will only include 2 of the 4 facelets on the screen -or- I will get NullPointerExceptions for objects that I know have been created in the session bean I am currently using -or- I will get a duplicate form Id after trying to re-submit the page. Could the javascript click simulation not be submitting all of the form elements or is the enter key also acting like its default action (the form submission) in addition to the "click"? I'm really at my wit's end here (plus it's nearly 3 AM, that never helps things). All of the buttons being clicked are standard h:commandButtons. There is some setTimeout logic included to disable the buttons on the page to prevent double clicks (I cannot disable them onsubmit because disabled buttons don't pass the right values, perhaps that's causing it, but if so, clicking the buttons with the mouse would cause that issue too, right?)
I am not posting the code (yet), but if anyone wants to take a look see and see if I am doing something really abhorrently wrong, I'm more than willing to, I'm just curious if anyone has had problems regarding javascript submission of forms via the click() method. Clicking the button does not exhibit this type of behavior. Just as a side note: I am doing different things with the enter key depending if a modal window is open (the enter key closes the modal if it's up, and if not, it submits the form via a button click).
Any help is much appreciated, if anyone has any inkling about where I should start looking for answers it would be really helpful.
Thank you.

edfrost wrote:
Could the javascript click simulation not be submitting all of the form elements or is the enter key also acting like its default action (the form submission) in addition to the "click"?My guess is the second of these. You need to suppress the event handling after programmatically clicking the button.

Since upgrading to Firefox 10.0.2 my AVG extension has had to be disabled, as after typing in any web address in the address bar, the enter key had no effect and I could not go to the site without pressing the Reload arrow on right.

I have recently upgraded Firefox to the latest version 10.0.2. After that I could not enter any website address and press the enter key and get to the website, nor could I select a website from the dropdown list of previously visited websites. The only way I could get there was by pressing the arrow on the right side of the address box (Reload current page). Once I disabled the AVG extension, everything worked normally. As soon as I enabled the AVG extension, it stopped working again.

Follow these steps for the controls to work:
# Start > Programs > Mozilla Firefox > Mozilla Firefox
# Find the “Tools” menu at the top of the browser window and select “Add-ons”.
# Click on the “Extensions” icon to make sure you’re in the correct option menu.
# Locate “AVG Safe Search” and click on the containing line to highlight and select the add-on.
# Click the “Disable” button and close the Add-ons window.
# Close down any Firefox windows you may have open.
# That’s It – You’re Done!

Why does firefox change fonts when I am trying to download or get help, click and enter keys are disabled why?

I recently did a clean install of windows7 after returning from Europe and installed Mozilla firefox being fed up with microsoft and google .
Fire fox seemed to be working ok but 7 out of 10 downloads were failing, and it seemed that every ebsite entered in the address bar turned into a question.
There was no save shortcut, or paste buttons just a set of to me useless buttons first html, last html, then when I tried to contact help all of a sudden I got a "install fonts" notice and the enter key stopped working,
and any action key was also disabled without advising me.
It appears that either Mozilla or someone doesn't want me using firefox.
I also noticed that the clean disk and other utilities didn't work and that the temp and temp internet folders were empty when I tried to open them but they actually had some 25 megabytes in them when queried as administrator. I also noticed a quick flash reference to Jscript=void,
and my 32 bit computer suddenly started up as a 64 bit Turion.
scan and system clean said machine was clean.
Whats going on here?
I am not on my machine, I can't contact you on it because the enter button has been disabled by font change.
Maybe this robot needs some help too!

Can you undo the system restore?
Note that using System Restore can cause your Firefox installation to get corrupted because not all files are restored (only files in a white-list), so be cautious with using System Restore.
*You may lose data in the Firefox profile folder like .js and .ini files pr profiles.ini can be affected.
*You may need to (re)install software that was affected.
In case you need to reinstall Firefox then you need to delete the Firefox program folder before reinstalling to make sure that all files get replaced.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

How can I prevent forms from being prematurely submitted when users click on the "Enter" key?

Is there any way that I can prevent Dreamweaver CF submission forms from being prematurely submitted by the user when he/she clicks on the "Enter" key before they have completed the form? I need the users to finish form and click on the "Submit" key. I have the "Submit" key action configured as "submit form"

Thank you!
Found a solution through Google.

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

How can I remove the "enter" key from the keyboard? (New Macbook)

I have the last white macbook, I spilled beer in a couple of keys, I managed to removed them without problems, but I can't find the way to remove the Enter Key, and there is no help on internet Anyone?

What characters are you talking about exactly and why would you want to remove any?
There is really no way to modify Apple's keyboards or add your own in iOS, but there are some apps that may provide a work around.

Text entry boxes in CP6 - Enter key to validate input does not work in Safari?

I'm using Captivate 6 to create a step by step walkthrough of some different processes that are commonly completed in my workplace. Some of the example processes have portions where text is entered to simulate a process the end user might need. I have text entry boxes in these slides that require validation of the input to move along, with Enter used as a shortcut key. This works great in Firefox, Chrome and IE all the way down to 8....but if the course is run in Safari, the enter key does nothing. Is this a known issue?
Additional info: For many of these text entry boxes, the point is that it is a search field that has a little binoculars icon next to it that executes the search in the actual software we are simulating. For these slides I actually have the submit button associated with the text box made invisible (no fill, no stroke) and placed on top of the binoculars icon. This is an acceptable method of doing the task we're demonstrating, and just so happens to be a workaround for the enter key not working in Safari. However, a few places we have text entry that doesn't have the search/binocular icon next to it because there is a different goal on that section of the software we're visualizing. In those cases, there is no place for me to put an invisible submit button, and I can't make the submit button visible because that's not how the software we're demonstrating would work (thus defeating the purpose of the training).

Sorry, this is a known bug with no fix available yet, but the makers of SwiftKey are aware of it and we will work with them to fix it: https://bugzilla.mozilla.org/show_bug.cgi?id=617298
For now, the only solution is to use a different keyboard when using Firefox.

How to call a method in backing bean on hitting 'Enter' key on a page.

Hi all,
I would be obliged if any one can provide me solution for the below given problem.
My requirement is to call a method in backing bean when i hit 'Enter' key on a JSP page.
I am trying this by using a script given below.
*function fnChangeFocus(){*
*if(window.event.keyCode==13){*
* document.getElementById("mainform:submitForm:commandbutton").focus();*
The JSP has the textbox as given below.
*<h:inputText id="inputtxtboxid" disabled="false" value="#{Bean.inputvalue}"*
onkeypress="fnChangeFocus()" size="24" />
Using this I could not acheive the required functionality. Please suggest some alternative.
Thanks,
Jagadeesh Pala

Only a form element supports the submit() function. Make sure that the getElementById returns the appropriate form. Or rather pass the element as the 'this' reference to the function and get the parent form from it.
After all this is just basic DHTML / Javascript+DOM knowledge and in fact this has nothing to do with JSF. For future basic DHTML / JS+DOM questions you may take a look at the appropriate forums, e.g. dhtmlcentral.com, dynamicdrive.com, etcetera.

All of a sudden my Enter key no longer works in SQL Developer.

All of a sudden my Enter key no longer works in SQL Developer. I don't know how I managed to disabled it. Can anyone tell me how to re-enable it?
I already tried the following:
- I closed the application and re-opened it. - It didn't work
- I re-started my machine. I didn't work
Help! Thank you

The same thing has just happened to me and this was very useful to correct the problem --- but now I am wondering why or how this happened. To the best of my knowledge, I haven't make any setting changes so why did I lose the Enter action?

Enter Key

Similar Messages

Maybe you are looking for