"Enter Passcode" screen not showing the dots for key press

I've a passcode that is 6 characters long. When I slide to unlock my phone , the "Enter Passcode" screen comes up as normal, but sometimes when I try to enter my passcode in the white box, though the key press turns blue under my finger tips as normal but nothing (no black dots) is entered into the white box. Whenever this happens I'm not able to unlock my phone with the passcode and I've to power off and power on the phone to detect the passcode.
Not sure anyone else having the same problem as mine. If anyone encountered the same problem and know how to fix it, please help me.
Thanks!

I have two iPhone 4S both with iOs7 and simple passcode. One had the dots, the other didn't. I went through changing settings on the one without dots to match the settings to the one with dots one at a time until they came on.
For me the exact change was turning on the Auto Brightness setting.
Settings > Wallpapers and Brightness > Auto-Brightness
Perhaps it's the same bug for complex passcodes? Worth a try.

Similar Messages

Listener not showing the instance for informix.

Hi All,
I am using oracle gateway 11g and here I just discovered that the one of the database listener not showing the instance for the informix gatways, though it has already configured. whereas on other database , the listner is showing the instances for informix database. it was running fine few days back though.
would appriciate , if you coule let me know that why it suddenly stop responding ?
----------------- OK Listener ----------------------------
ptmsap> lsnrctl status LISTENER_PTMSAP
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 29-JUL-2012 05:07:07
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=10.222.68.34)(Port=1621))
STATUS of the LISTENER
Alias                     LISTENER_PTMSAP
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                19-JUL-2012 10:25:25
Uptime                    9 days 18 hr. 41 min. 41 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /db/ptmsap11/oracle/product/11.2.0/network/admin/listener.ora
Listener Log File         /db/ptmsap11/oracle/diag/tnslsnr/tbx4new/listener_ptmsap/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.222.68.34)(PORT=1621)))
Services Summary...
Service "MSCARD4" has 1 instance(s).
Instance "MSCARD4", status UNKNOWN, has 1 handler(s) for this service...
Service "as400" has 1 instance(s).
Instance "as400", status UNKNOWN, has 1 handler(s) for this service...
Service "db2test" has 1 instance(s).
Instance "db2test", status UNKNOWN, has 1 handler(s) for this service...
Service "ptmsap" has 1 instance(s).
Instance "ptmsap", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4ifmx" has 1 instance(s).
Instance "tg4ifmx", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4trai" has 1 instance(s).
Instance "tg4trai", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LISTENER_PTMSAP =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1621)
SID_LIST_LISTENER_PTMSAP =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmsap)
      (ORACLE_HOME = /db/ptmsap11/oracle/product/11.2.0)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (ENV="LD_LIBRARY_PATH=/db/ptmsap11/oracle/product/11.2.0/dg4db2/driver/lib:/db/ptmsap11/oracle/product/11.2.0/lib")
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/db/ptmsap11/oracle/product/11.2.0)
+++++++ Not OK Listener++++++++++++++++++
LISTENER_SMI =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1821)
SID_LIST_LISTENER_SMI =
(SID_LIST =
     (SID_DESC=
     (SID_NAME=SMICAN)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
     (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIINTL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMEL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMRKTS)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
LISTENER_PTMQA11 =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1521)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmqa11)
      (ORACLE_HOME = /pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib)
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/pdsdev/ptmqa/oracle/product/11.2.0/db)
)Regards
Edited by: 937853 on Jul 29, 2012 2:10 AM

thanks all, I was able to solve the issue. it was indeed a port no , which caused this issue.

Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move.

Chess.app runs OK on my MacBookPro under OS 10.6.8. Under the same OS on my Mac Pro Chess.app will not show the hint for the next move. The detail on the desktop MacPro is
Model Name:    Mac Pro
Model Identifier:    MacPro1,1
Processor Name:    Dual-Core Intel Xeon
Processor Speed:    2.66 GHz
Number Of Processors:    2
Total Number Of Cores:    4
L2 Cache (per processor):    4 MB
Memory:    1 GB
Bus Speed:    1.33 GHz
Boot ROM Version:    MP11.005C.B08
SMC Version (system):    1.7f10
Serial Number (system):    G87212BJUPZ
Hardware UUID:    00000000-0000-1000-8000-0017F20A3C06

Hello
did the keaybord shortcut work ?
For info chess app come from system install
HTH
Pierre

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....thank you

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....not really sure what happened, but i didnt do anything different from my daily stuff
just an update....when i hit the right command key it respond normal (cmd v cmd c...etc) but when i hit the left command key it shows the x and two commands pressed as well as it delete what i'm working on i.e like backspace but takes out everything at once
thank you

Hi Moe,
Sounds mostly likje a bad KB, do you have another to test with?
Or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

HT1212 my ipod says permanently disabled connect to itunes.i connect to itunes and it says ipod is disabled enter password on device but it is not showing the slide for which makes the passcode come up. HELPI!!!

my ipod says connect to itunes permanently disabled i did and it says enter passcode on device. its not showing the slide board that brings up the psscode entry

iOS: Unable to update or restore - Support - Apple

Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

Web ADI Report set, excel is not showing the data for any of the three repo

We are currently working on 11.5.10.2 and moving from Desktop ADI to Web ADI. At the time of publishing report in Web ADI the excel is empty.
AFter successfully running the WEB Adi reportset for Consolidate Balncesheet ( for a period ex: APR-2012), there were 3 reports that were publlished as a set. Then I went to Repository Management and went to the folder and subfolder where I saved all the above 3 reports. When I click on view on one of the reports, the excel spreadsheet opens and try to load something for a while but finally ends up loading nothing.
I am unable to figure out what went wrong. Do you have any idea.
If someone can help me, I really appreciate.
Thanks
Uday

Hi ,
In u r query what I observed was unit cost*gross profit is Amount Sold. Can u make this calculation with Physical calculation rather than and logical calculation.
See if u have kept logical joins for both the tables with the fact and set the content level at detail level in the content level of fact.
Then it will work
Thanks
S

IBASE-IOBJECT not showing the description

Dear Experts,
Am creating IBASE using my standalone program. Its creating properly. My problem is its not showing the Description for the Ibject ( ie product ). While creating component i update the field descr in i_comp_data. But no use.
Anyone Guide me how to show the description?
Anandhan

Hi Anandhan,
Can you provide the function module used to create the IBASE-IOBJECT.
Best Rgards,
Dharmakasi

OS X has updated but it does not show the present update

https://www.dropbox.com/s/z8yynop14dciiob/Screenshot%202014-06-04%2012.55.06.png
Trying to install OS X Server and it says that I have to update to 10.9.3
Which I did as you can see.
I Rebooted again doing a Command/Option/ P R to insure that all cache memory was deleted and Still it will not show the update for 10.9.3
What can I do now to force it to read 10.9.3 Please

Try re-indexing Spotlight.
Spotlight – Re-index
If that doesn't work, try running the combo update.
10.9.3 Combo

The iPad says disabled connect to iTunes. When connected it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Firefox constantly tells me it is updating to next version, and shows the dots moving, but it goes on for hours and does not download--what should I do?

Please see above--I don't know a better way to explain it.
* Mac OS X 10.6
* Firefox 3.6.13
This happened
A few times a week
This started when...
A couple of months ago.
More Information
Firefox tells me an update is being installed. I see the dots moving. I exit everything else and wait for the update to complete.
It goes on for several hours showing the dots moving. Apparently, nothing is really happening. I shut the computer down when I go to bed. When I reboot, I see the same thing, and get the same results. I've checked the help database, and the previously asked questions, but can't find anything. Any suggestions?
Here are my system details:
Installed Plug-ins
* Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
* Gecko default plugin
* iPhoto6
* Netscape plug-in that plays Rhapsody content
* Unity Web Player lets you experience dazzling interactive 3D right in your browser. For more information, visit Unity .
* The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime.
* Adobe Shockwave for Director Netscape plug-in, version 11.0.3
* DivX Web Player version 2.0.2.39
* Shockwave Flash 10.1 r102
* The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
* 3.0.50106.0
* Version 1.9.2.1599
* Google Talk Plugin Video Accelerator version:0.1.43.4
* Java Plug-In 2 for NPAPI Browsers
User Agent
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13

i tried restoring itz saying error occured 2008 :-(

My ipod touch 2g is frozen on the the enter passcode screen and it won't shutdown what do i do?

My ipod 2g is frozen on the enter passcode screen and i tried to shut it down but it dosen't what do i do?

- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

HT1351 I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Plea

I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Please help

The iPod's firmware is corrupt. You'll need to restore it again in iTunes. If necessary, place the iPod in recovery mode for iTunes to recognize the device. Use the instructions in this Apple support document to walk you through the process of placing the iPod Touch into recovery mode.
iOS: Unable to update or restore
B-rock

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferenc

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!

that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.

"Enter Passcode" screen not showing the dots for key press

Similar Messages

Maybe you are looking for