Enter power on password HPLE1851

my computer needs a power on password it is a HP what am i supposed to do?

Hi,
Again:
  What is your machine ? Please try 3 times and post back error code
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Enter Power-on Password

    Hello, dawn one morning when I opened the machine receives a request from the desktop of his beloved Enter Power-on password.
      Currently I have a way to remove cmos reset jumper and clear cmos button next to the cmos battery but still can not change anything.
      My models: HP 6000 Pro SFF PC
      Serial No: (Personal information removed by Moderator)
      Product No: AT492AV.
      Thanks You

    Refer:
    http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility?s=ad...
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Blue screen with power-on password

    Enter Power-On password on blue screen when booting.  Can't get into bios or anything.  Model is HP 110  (110-210).  After 3 attemps it locks up.  No code given.

    Hi: Please read the first post at the link below which may resolve your dilemma. You would enter the serial number of your notebook in the box on that BIOS password website to generate an unlock code. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​s​... If that works... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.  

  • Forgotten password - Power-on Password

    can someone please help me with this.  
    I have not logged into my pc for 5 months and i have forgotten my passwords.
    i have turned on my pc and it goes to the 'ENTER   POWER-ON PASSWORD' screen
    can someone please tell me how to bypass this and or remove this setting/function from my pc
    thanks

    You're very welcome.
    I cannot find any official documentation on your specific model or product number on HP's website but I did find a few other 110-005 models.
    They all seem to have the same motherboard.
    Below is the link to the motherboard specs I believe your PC has.
    http://support.hp.com/us-en/product/HP-110-000-Desktop-PC-series/5359000/model/5392642/document/c037...
    Look under the Jumper Settings section, and read the instructions for Clearing the Password Settings.

  • HP Pavilion DV3500 Laptop - Power On Password Popup

    Today I open my Laptop it just popup 'Enter Power On Password' before going into windows...anyone please help very urgent..appreciate. I have no idea what is my Laptop Power On Password is... I have tried my windows account login password but not working... After few times attempt it just show me this 'Key: 82585981'...

    Hi,  Try:   33483307  Regards Visruth 

  • Hdx9200 Power On Password

    I have a HP Pavilion HDX-9200 notebook and it is asking for "Enter Power On Password".
    I havent any system disabled code. Can anyone help?  
    Thanks
    Andrea

    Andre.
    Maybe I can help.
    NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords
    and CMOS settings to be cleared.
    http://h10032.www1.hp.com/ctg/Manual/c01279508.pdf
    Page 74 chapter 4.
    If you will note it requires disassemble."Sorry"
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Enter Admin or Power on Password

    I cannot access laptop it said my password was incorrect now it wants me to Enter Admin or power on password/ It does not like the admin password I have and I lost ower on code.
    This question was solved.
    View Solution.

    Hi Vicki,
    You would have needed to create the reset flash drive when originally setting up the password for option you're prompted for to work.
    If you normally sign-on with an email and password, you can reset the password via another PC from the Microsoft page on the following link.
     https://account.live.com/password/reset
    Alternatively, if this is a Local Account, try the free application Here.
    A final option would be to reinstall the OS via the Recovery Partition or your Recovery Media - these options are described in the HP document on the following link.
    Performing An HP System Recovery – Windows 8
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion DV5-1030 "Enter Administrative Passworl or Power On Password"

    Turn on before it goes through the expected booting I got message "Enter Administrative Passworl or Power On Password". I do not have the password. guessed 3 times. Each time got message "Invalid Password". After 3rd time got message "System Disable" with number 50581431. How do I get password needed to get into system? Thanks

    Help me!!!!
    Hp pavilion dv5 system disable
    Number is 50176655

  • HP enter administrator password on power on password

    Hi All, Please help me with my problem...HP enter administrator password on power on password....  System Disabled : 92961174 Thank you in advance. maersk

    You're welcome  All the best, DP-K

  • Enter administrator password or power on password for "System Disabled 94238025"

    I get the message, "Enter administrator password or Power on Password" when I open my laptop. What code do I enter in my HP 2000 when I receive the message "System Disabled 94238025". I appreciate any help you can give me!

    Hi: Please read the first post at the link below which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​... Then... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Enter Admin Password or Power On password. The System Disable number is [ 59568624 ]

    3) Enter Admin Password or Power On password. The System Disable number is 59568624

    Please enter : 46440200 Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold  down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • Enter administration password or power on password

    Upon start up it says
    Enter administration password or power on password
    Then after 3 failed attempts
    It says system disabled
    [ 50790401 ]

    Hi, Please try:    45698427 Regards.

  • Laptop Enter Your Administrator Password or Power on Password

    Hello, I have a problem with a Pavilion dv6. I never put a administrator password on power up but the notebook stuck on a blue dialog box " Enter the administrator Password", i try a lot of numbers  but the screen return 58670714 number on a few times. 
    How can i solve that problem ?
    Thanks for all.

    Hi, Please try:    47758330 Regards.

  • Laptop Enter Your Administra​​tor Password or Power on Password

    My laptop is asking me to Enter Your Administra​tor Password or Power on Password. System Disabled 51249212. Can you help me?

    Mrico.
    Use that code to go into the BIOS.
    Disable all passwords that are enabled.
    If asked for the CURRENT password use that code.
    If asked for NEW password just hit enter.
    If asked to VERIFY password just hit enter.
    Save and exit.
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Enter administrator password or power on password

    MY BATTERY DIED AND WHEN I TURNED IT BACK ON IT ASKED FOR THE ADMINISTRATOR PASSWORD OR THE POWER ON PASSWORD WITCH I FORGOT  I GET A SYSTEM DISABLED CODE OF 59473606 CAN ANY BODY HELP ?

    Hi,              Try the below code to reset 46551228

Maybe you are looking for

  • Msi x79 xpower II . Bios permanently corrupted

    Hi i have a really bad situation on my mobo BIOS A and B corrupted. Can boot just from "multi bios button" Bios present V2.7 Used the "MSI Forum HQ USB flashing tool" with package you posted (150) but still no success. I also tried the M-flash method

  • Calender: first day of the week problem

    on my macbook i have monday as the first day of the week in month view. on the ipad (and iphone) sunday is shown as the first day, which is a real pain for someone who has more of a visual recollection of the week than a list of dates. can i change t

  • Acrobat 7 Std compatible with PowerPoint 2007

    I have Acrobat 7 Standard Edition; have used it for years with Office 2003.  Recently I updated my PowerPoint 2003 to 2007, and now when I go to convert my 07 PowerPoint to a PDF I get the following message "Missing PDF Maker files" "Do you want to r

  • Can I integrate BPM with WebLogic Portal virtual content repository?

    For example, when there is a new added node in WebLogic Portal virtual content repository, the workflow triggerd, and start a workflow instance on that node. May be the node is a document, I'd like the document have a complex approval process. My que

  • Printing at Ricoh C3501 with user code

    My MBP running below printer drivers for printing to Ricoh C3501 with user code. foomatic-rip-4.0.6.230.dmg gplgs-8.71.dmg pxlmono-1.9.dmg RicohUserCodes.command As Matt Broughton recommanded before upgrade. The printing worked fine. After upgrade to