Enter the forest and it locks me out of entering the domain controller or any child domains

Using Windows Server 2008 R2 SP1, no matter if I use the Graphical User Interface (GUI) or the Answer Method to enter the forest and it locks me out of entering the domain controller or any child domains. 
Is there a remedy to this?

Hi Philo,
Would you please tell us that how did you try to enter the forest?
Are you able to run dcpromo to add domain controllers or create child domain?
Best Regards,
Amy

Similar Messages

  • HT201263 Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New
    Also, see iTunes- Restoring iOS software.

  • After installing iOS 5, my ipad 2 will not accept my access code and has locked me out

    after installing iOS 5, my ipad 2 will not accept my access code and has locked me out.  Any ideas?

    I don't know if your symptoms are the same as mine, but my problem is the same. Specifically:
    My update seemed to go fine, but I noticed that items in Notification Center were not current or missing, as compared to the iPhone. Also, when iTunes saw the iPad without it being connected by cable, the portion of the iTunes screen that displayed the OS status was blank, and it told me that I had to connect physically to update. When I did, iTunes confirmed that iOS 5 was indeed installed and current.
    With this, I decided to shut down the iPad completely, and restart it. When it came back up, the lock screen had changed. I now get a full keyboard (not just a number pad). When I attempt to enter my 4-digit passcode (and I know I'm entering the correctone), the iPad won't take it. Now it's completely locked and I can't access it.
    The odd thing is the way the screen changed to display a full keyboard on the lock screen. This didn't happen to the iPhone.
    All devices are running the current versions of everything.

  • My friend took my phone and tried to guess my password to unlock it, and he locked me out of my phone for a minute, but when it unlocked and i tried to use my phone all of my apps, photos, all my data had been deleted. how can i get them back?

    my friend took my phone and tried to guess my password to unlock it, and he locked me out of my phone for a minute, but when it unlocked and i tried to use my phone all of my apps, photos, all my data had been deleted. how can i get them back?

    As Ocean20 say, your only shot at recovering the photos and data is to restore from a backup (with iTunes if you took the backup with iTunes, through iCloud if you took the backup through iCloud).
    The erasure is to prevent your data from falling into the hands of somebody who takes your phone and eventually guesses your password. If you feel that the inconvenience caused by this feature and your friend outweighs the trouble that somebody could cause if they got possession of your contacts and other data, you can change this behaviour.
    Settings > General > Passcode Lock > Erase Data > OFF

  • If you know your apple ipod touch passcode and it lockes you out and you try your passcode again how do you get in?

    If you know your apple ipod touch passcode and it lockes you out and you try your passcode again  how do you get in?

    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS: Understanding passcodes
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    You will have to restore the device.

  • HT1212 My iPod touch is not synced and I locked myself out, how can I access it again without erasing my device?

    My iPod touch is not synced and I locked myself out, how can I access it without erasing the device?

    You will have to restore.

  • It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    Hi clintfromid,
    Thanks for using Apple Support Communities.  I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

  • What can you do when you forget your iPod password and it locks you out?

    What can you do when you forget your iPod passcode and it locks you out.

    http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • How can I reset my sons restrictions pass code? I have failed 9 attempts and it locks me out longer and longer.thx

    How can I reset my sons restrictions pass code? I have failed 9 attempts and it locks me out longer and longer.thx

    see here
    http://support.apple.com/kb/HT1212
    No choice

  • Question:  I accidently entered my wrong date of birth and it locked me out.

    I purchased the Adobe Word converter software and when I signed in the first time it asked for my date of birth.  It locked me out when I accidently didn't change the year to the right year.
    Help with that?

    You're going to have to call Apple and ask for Account Security in order to get this straightened out.

  • Yesterday was attempting to download music.my daughter used her itunes account and added the $30  i had purchased. since she had not used the account ina while she forgot the security ? and it locked us out for what the rep said would be 8 hours..

    yesterday I attempted to download music after purchasing $30 itune card from my daughters laptop..It cam to thje point where it asked 2 security questions and we were incorrect both times since she had not used it in 4 yrs..It locked us out. Had a rep call and he could not help since it was blocked. he sadi it would take up to 8 hours to go back in and we can changed the security ?s...How do I get there to do that?

    Hi FishonRB,
    Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal

  • My iPhone 3 is disabled and has locked me out

    My iPhone 3 has locked me out saying it is disabled and to connect to iTunes. So I connect it to iTunes, then iTunes says it cannot connect to the iPhone because it is locked with a passcode? Both ways I'm locked out of the phone completely.

    See if this helps
    http://support.apple.com/kb/HT1212

  • I didnt know my security questions and it locked me out

    i didnt know my security questions and it locked me out

    Forgotten Security Questions / Answers...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
    Or Email Here  >  Apple  Support  iTunes Store  Contact
    More Info >  Apple ID: All about Apple ID security questions
    Note:
    You can only set up and/or change a Rescue Email Before you forget the questions/answers.

  • How to change the background of the StackPanel control when any child element has focus?

    Hello folks!
    I need to change the background of the StackPanel control when any element within the StackPanel has focus. I am executing the code snippet below. The code works fine with elements within the Grid control named "main". It doesn't work when I focus
    an element within the Grid control named "header".
    <StackPanel x:Name="techReportStackPanel" Width="250" Background="{Binding ColorBrush}" >
    <StackPanel.Style>
    <Style TargetType="{x:Type StackPanel}">
    <Style.Triggers>
    <DataTrigger Binding="{Binding ElementName=techReportStackPanel, Path=IsKeyboardFocusWithin}" Value="True">
    <Setter Property="Background" Value="Gray" />
    <Setter Property="Opacity" Value=".5" />
    </DataTrigger>
    </Style.Triggers>
    </Style>
    </StackPanel.Style>
    <Grid x:Name="header">
    <TextBlock x:Name="headerColumn" Text="{Binding Name}" Style="{StaticResource ColumHeader}"/>
    <Button Visibility="{Binding ElementName=headerColumn, Path=Text, Converter={StaticResource delButtonVisibilityConverter}}" Command="{Binding DelCommand}" Content="x" ToolTip="{l:Translate TechReportDeleteToolTip}"/>
    </Grid>
    <Grid x:Name="main">
    <Grid.ColumnDefinitions>
    <ColumnDefinition Width="*" />
    <ColumnDefinition Width="*" />
    </Grid.ColumnDefinitions>
    <wpftoolkit:WatermarkTextBox Grid.Column="0" Style="{StaticResource OrdinaryTextbox}" Watermark="{l:Translate LengthLabel}" ToolTip="{l:Translate BoreholeSpacingInRow}" Text="{Binding BoreholeSpacingInRow, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged, StringFormat=F2, Converter={StaticResource zeroToEmptyDoubleConverter}}" />
    <wpftoolkit:WatermarkTextBox Grid.Column="1" Style="{StaticResource OrdinaryTextbox}" Watermark="{l:Translate WidthLabel}" ToolTip="{l:Translate BoreholeSpacingBetweenRow}" Text="{Binding BoreholeSpacingBetweenRow, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged, StringFormat=F2, Converter={StaticResource zeroToEmptyDoubleConverter}}" />
    </Grid>
    </StackPanel>
    Any advice and suggestions will be greatly appreciated!

    >>It doesn't work when I focus an element within the Grid control named "header".
    You mean when the Button in the "header" Grid is focused? A TextBlock is not focusable so when the Button is not visible no element in the "header" Grid will be focused since you only have two elements in the "header" Grid.
    But when the Button is visible it should work. Please refer to the following code:
    <StackPanel x:Name="techReportStackPanel" Width="250" Background="{Binding ColorBrush}" >
    <StackPanel.Style>
    <Style TargetType="{x:Type StackPanel}">
    <Style.Triggers>
    <DataTrigger Binding="{Binding ElementName=techReportStackPanel, Path=IsKeyboardFocusWithin}" Value="True">
    <Setter Property="Background" Value="Gray" />
    <Setter Property="Opacity" Value=".5" />
    </DataTrigger>
    </Style.Triggers>
    </Style>
    </StackPanel.Style>
    <Grid x:Name="header">
    <TextBlock Text="text..."/>
    <Button Visibility="Visible" Content="Button" />
    </Grid>
    <Grid x:Name="main">
    <Grid.ColumnDefinitions>
    <ColumnDefinition Width="*" />
    <ColumnDefinition Width="*" />
    </Grid.ColumnDefinitions>
    <TextBox Grid.Column="0">main grid...</TextBox>
    <TextBox Grid.Column="1">main grid...</TextBox>
    </Grid>
    </StackPanel>
    When the Button is focused the Background colour of the StackPanel is set to Gray as expected.
    If you want to be able to focus the TextBlock you should set its Focusable property to true:
    <Grid x:Name="header">
    <TextBlock Focusable="True" x:Name="headerColumn" Text="{Binding Name}" Style="{StaticResource ColumHeader}"/>
    <Button Visibility="{Binding ElementName=headerColumn, Path=Text, Converter={StaticResource delButtonVisibilityConverter}}" Command="{Binding DelCommand}" Content="x" ToolTip="{l:Translate TechReportDeleteToolTip}"/>
    </Grid>
    Hpoe that helps.
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't ask several questions in the same thread.

  • HT2693 i can't reset the password to the ipod and it locked me out what do i do?

    I have a ipod touch since about three years ago and i had not used it for a while and i went to log in it the other day and locked my self out.  Can anyone tell me how to reset it or what should i do? I need help.  I am lost..   Any help will be great..  thanks in advance..

    You will have to plug your iPod into iTunes to restore it in order to remove the passcode.
    Here's more info: http://support.apple.com/kb/ht1212

Maybe you are looking for

  • Error while executing a Report in Browser

    Every time I go into BI and try to run a GL report it never comes back with data.  It runs for a long time. The comes back blank for a long time, then finally it ends in error. Please help. As it is the end of the year I need the GL information on my

  • Email address is already verified for another Apple ID.

    help...how do i know what apple id is using my email address? i've manage to change the email address for my apple id with a different email address which is verified. but i wanna know what apple id (other than the one i use to log in to icloud itune

  • Path in getImage

    Hello my applet class is loaded successfully in the directory of "c:\applet\applet.class", and in my applet program, i want to create a image by "getImage". Therefore, i use the following code : Toolkit toolkit = Toolkit.getDefaultToolkit(); image =

  • Can't Uninstall Premiere Pro CS4 from Trial-Missing Uninstall file

    I was using the Premiere Pro CS4 (CS5 XP compatibility pack) as a free trial on my Windows XP computer. Since my trial period is over, I want to uninstall it. Unfortunately, something seems to be wrong. When I click on "Premiere Pro CS4 and After Eff

  • Connect E2000 to WRT160N wirelessly?

    I ve tried to read previous similat posts but dont quite understand if its possible or not. I just got a linksys E2000 hoping that the signal would reach the whole house includung the backyard pool/area but it doesnt. I want to try to connect my WRT1