Enter your system pin code this mac

MacBook Pro
Model:A1425
Serial: C0*****R54

Hello Ail,
https://discussions.apple.com/message/23494346#23494346
https://discussions.apple.com/thread/3719842?start=30&tstart=0

Similar Messages

Enter your system lock pin code to unlock this mac

I just traded my Macbook Pro for a 27" Core i5 iMac. I wiped the iMac when I traded and I brought it home to do a full reinstall. I booted holding the Option key down and noticed this iMac had a recovery partition I opted to use the recovery partition to reinstall. To my surprise it was Lion. And the cd was snow leapord. I was cool with that and signed in and used the computer all day. Then sometime while I was sleeping a obnixious alarm went off on the iMac and there was a box to enter your system lock pin code to unlock this mac.
Priding myself on doing all repairs on my own since my primary job is reinstalled and virus removal. Long story short I could not access anything no matter what I tried. I ended up calling apple care and asking what needed to be done they explained I needed to bring it to a apple authorized store and they would have to unlock the firmware.
Do you guys know what they are talking about or is there anything I can do before driving 100 miles to my nearest apple store. I find this rediculous.

I did indeed did wipe the system clean at the owners house, I went home with what I thought was totally clean hard drive, there was a recovery partition I did not see until I got home. This recovery partition was indeed tied to the original owner which I did not know at the time. I assumed it was like any old windows recovery and it was clean and made reinstalls a dream. Well long story short I had the snow leapord cd in the drive and ready to go until I seen this recovery partition and I opted to use the **** recovery and I reinstalled registered and signed into everything and used the computer all day 12 hours probably. By the way the recovery partition that was tied to this guy was lion.
So then I left the computer on and went to sleep. Late last night an alarm went off and that is when I saw the enter the pin to unlock this mac. I have tried holding the C when I boot up, I have tried holding the Option key when booting up. I have tried resetting the pram. Nothing can be done. I can get to another lock screen by phsically unplugging the power cord then booting up holding the option key. That will bring me to a screen with nothing but a lock and a line that I can type some kind of admin password. Nothing I have with work. I tried, root, admin, administrator, my password I used when I set lion up. Nothing!!!!!.
At this point this machine is more or less 100% useless, the only option I can see is to bring it to a authorized apple retailer and have them fix it. I did bring it to a local apple store. And they said they could probably fix it, but I would have to pay them between 50-100 dollars. The repair guy said something about getting the info from the ram. I just laughed and left.
Anyway this is like a BIOS lock, you cannot get to terminal, cd, to any boot options, you cannot reset anything at all. It's a full lock.

HT4436 i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?

i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?

Question is did you lock your Mac from Find my iPhone using iCloud or is the Macbook really yours?
If you have in fact locked your Mac using Find my iPhone on iCloud then you will need to enter the PIN you have set when you locked the Mac.
*If you have not iniate the remote Lock then someone else has used your Apple ID and Password to lock your mac.
Message was edited by: Ammadz

Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help? I have tried the other option that were posted. None of them worked!

Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help?

ExciteWalk wrote:
I can't post the link here cause I'll probably get banned at this point. So help yourself and search rumors elsewhere
That's not very helpful, why are you here?

How many times can you enter the wrong pin code on an iphone before it resets?

How many times can you enter the wrong pin code on an iphone before it resets itself?

Hey Robin.T,
Thanks for the question. The following article provides the answer to your question:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
iPhone is disabled
iPad is disabled
iPod touch is disabled
You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
Thanks,
Matt M.

4 digit system PIN code required

I have a 2011 or 2012 iMac that I bought used 2 years ago. It was working good until a week ago when it locked up and asked for a 4 digit system PIN code. I do not have this information nor do have the person who I bought this computer from's information. Is this computer garbage or is there something that can be done?

Any luck yet? I finally updated to Mavericsk today and it's locked me out. My MacBook Pro is second hand and I have no idea what to do now!

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adil

This messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

HT201364 my system on about this mac show OSX 10.9.2 is it same OS X Mavericks?? Or i need to update??

my system on about this mac show OSX 10.9.2 is it same OS X Mavericks?? Or i need to update??

OS X 10.9.x is Mavericks. 10.9.2 is the current release.

My ipad has a passcode but i forgot it and i tried many times and it says "Ipad is disabled connect to itunes" so i did that and it pops up and says "you must enter your passcode to access this itunes account"

my ipad has a passcode but i forgot it and i tried many times and it says "Ipad is disabled connect to itunes" so i did that and it pops up and says "you must enter your passcode to access this itunes account"

THave you looked at this link http://support.apple.com/kb/HT1212

HT204053 enter your system lock pin code.what o do?

please help

If you are not the ownership of this Apple device, you should drop off this device at any Apple store or any police station. Do Not trying to unlock this device by retrive a system lock pin code.

Itunes keeps asking to enter a correct security code, this is a loop I cant escape.What gives?

I have re entered my info, double checked it. Called the bank and everything is ok on their end. How can I get my Itunes to recognize all my info is correct? It keeps prompting me to enter a valid security code, over and over again.

See this -> http://support.apple.com/kb/TS1646

HT203254 pin code on mac

how to unlock macbook pro locked by icloud remote lock pin code ?

You use the same code you used to send the remote lock. Don't remember it? Then its a trip to the Apple store.

HELP "Enter your System lock PIN code to unlock this Mac"

i signed in on my icloud and now this comes up, i dont know the pin or even remember puttin gon one....can someone please help?? all my work in on this.

Welcome to the Apple Support Communities
That appears when your Mac is locked using “Find my Mac” (did you remember if you locked your Mac?). First of all, if you didn't lock your Mac, change the Apple ID password, because it would be hacked > http://iforgot.apple.com
Then, you should know that it's not possible to start the computer without inserting the PIN, so the only thing you can do is to take the Mac to an Apple Store or reseller to get the MacBook Pro unlocked

Enter your system pin code this mac

Similar Messages

Maybe you are looking for