Entered Numbers Not Visible During Entry

Have a oddity on my Mac: If I try to type in values for the sliders in the Develop module, they dissapear duing entry.
1. Click on an enterable area for a slider. The text highlights.
2. Type in a value. Value is still visible.
3. As soon as the slider moves to the entered value, the text dissapears. It looks like it changes to the normally displayed gray value.
4. Tab out or click outside the area and all goes back to normal.
Mac Pro Nahalem dual 2.93, 16gb RAM, 10.6.8, ATI 4870 512mb
Jim

i note the same problem on the exposure field entry. imac,lion.
it is distracting and correcting one's errors in this regard requires some effort.
vince

Similar Messages

  • Enhancement not visible during runtime

    Dear experts,
    I have a problem with getting enhancements up and running in runtime.
    I Changed 2 enhancements in FM J_1B_NF_VALUE_DETERMINATION and activated them. Activation goes fine, but for some reason during runtime (in debug mode), I can not see the code of the enhancement at all. My changes are not triggered, I can not even see the code in debug-mode. The complete code-block is missing. It seems that the enhancements are not active and are just not embedded during runtime. Do I have to activate something else? I guess CMOD and SMOD are not relevant in this case but if they are please let me know.
    Thanks in advance
    William

    if you are usng enhancement framework then there is no need of CMOD/SMOD.
    where have you created your enhancement spots? and what type have you given there?
    goto SE19 and see what actually is the status of the enhancement .. if active, keep breakpoint directly inside your enhancement coding,
    when FM starts executing, you will find a circular swirl(just on the left side of the code ), that mean it will goto your enhancement. it wont direcly show in the deugger, you press F5 and then it will go inside your code.

  • Hard Drive not visible during install.

    I recently tried to turn on my G4 and got just a white screen. So I assumed it was the hard drive. I installed a new Hard drive. Put in my Leopard disk and the drive is not visible. I went into Disk Utility to format it, if needed. It was not visible there either.
    Out of suspicion, I plugged in the old HD into a different mac via USB and my data is there and visible.
    What could the problem be? I went back and double checked all of the cables.

    I know it's a pain to take out just to test, however, did you plug the new drive into the other system via USB to see if it's recognized also?
    Usually in this situation, it's a cable problem. Either a cable is not seated completely, or in rarer cases, there's a problem with a cable itself. Since the old drive is visible to the other system, you may have another issue going on, like a logic board problem. I'd want to run the Apple hardware test. On the gray OS X system CDs that came with your system, find the one that says 'AHT Version x.x', insert it, reboot, and choose the extended test when prompted. Either of the TechTool programs can do similar testing.
    By the way, your sig says you have Snow Leopard 10.6.3 installed, which is impossible on a Powerbook. Leopard 10.5.8 is the last operating system release available today for Powerbooks.

  • Insecurity of Keychain Access: "secure" notes visible during authentication

    Sorry if this has been discussed before, but I'm not keen on wading through 137 pages of discussions.
    I recently discovered Keychain Access' ability to create "secure notes," and thought this would be a wonderful way to keep my serial numbers, bank accounts, and other sensitive information secure.
    However, I just tried to actually decrypt this information for the first time, and was rather shocked. When you attempt to open a secure note, and select the "show note" checkbox that prompts the "Deny / Allow Once / Always Allow" dialog box, the dialog box contains the "secure" information from the note!
    In my example, which you can see here (http://www.justinreese.com/media/images/secure_bbedit.png), the entire text of the note is included in the dialog, previous to any password authentication. Of course, because I'm reusing the login keychain, I understand that it's already been decrypted upon logging in; however, I was under the impression that using Keychain Access to store secure notes and other passwords offered a secondary level of protection, and that even if someone were able to compromise my system while I was logged in, at least that sensitive data would remain secure (the way a dedication application such as Wallet or Yojimbo would do it).
    So... is this a bug, an oversight, or simply my own poor planning in using the login keychain to store secure information?
    Thanks to all.
    17" Powerbook G4/1.5Ghz   Mac OS X (10.4.6)   Stock + 1GB of RAM
    17" Powerbook G4/1.5Ghz   Mac OS X (10.4.6)   Stock except 1.5GB of RAM

    My suspicion is that when you created the note, in the "name" field, you used "paste" intending to paste "BBEdit 8 Registration". However, if the clipboard at the time had contained multiple lines, the "Name:" field would then contain the entire contents (Owner Name, Email Address, etc), although it might not be immediately apparent since the main "Keychain Access" window would only display the first line. However, when asking for authentication, the full "Name" is displayed. This scenario is easy enough to replicate.
    The odd thing is that even if the "Name:" is subsequently edited to remove the extra lines, the "authentication dialogue" seems to continue to ask for authentication using the "old" name... it's probably being cached somewhere but I haven't been able to track it down.
    So in this case, I would call this "user error" for putting "secure" info in an "insecure" field in the first place, but there is definitely some sort of bug / oversight / slopiness in that the authentication dialogue doesn't update - so in effect it is asking you to authenticate for one thing, when in reality it is authenticating something that might have a completely different name. That sort of thing might open up "spoofing" opportunities, but for a user's personal keychain, I would suspect that anyone that can get close enough to do something with it would have opportunities to do far worse. Still, it can't be a good thing...

  • NOKIA N85 NOT VISIBLE DURING SUNLIGHT

    i have a nokia n85 smartphone. During sunlight, it is difficult to see anything. i put the light sensor to maximum but no result. can any one help me solve this?

    sorry, but it's a common issue, nokia's n85 and n86 are performing poorly in direct sunlight, that's just the way oled goes. altough the technology was designed for better clarity and contrast, it lacks on readability under strong lightning. the best thing you can do is set your phone on either a really darkish theme, or on a really bright one, it might help. however, there is a version of the n85 shipped since june 2009, which seems to comport better on direct sunlight. is that the one you have? if not, you might consider it.
    If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!

  • Missing Functionality:BP Properties not visible during Add

    Have formatted search to determine a new
    bp code based upon business properties, but the variable is not set.
    Select $[OCRD.QryGroup1] always returns 'N' even if the the BP property
    is set when in Add Mode. Tested with an existing bp record the variable
    is set correctly.
    Edited by: Robert Fernandez on Sep 9, 2008 7:56 PM

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

  • List of data targets is not visible during data upload

    Hi all,
      I am trying to load user defined transactional data into an info object, i will do all necessary customization steps such as creating application component,assiging data sources,creating info packages and then creating update rules in info cubes, moreover i wrote a routine which calculates sales reveune based on cost and quantity sold.
    My problem is that when i created infopackage , it does not list any data targets, Plz any one can give tips in this regard.
    thanks in advance
    regards,
    a.fahrudeen
    Message was edited by:
            FAHRUDEEN MUSTAFA

    Hi Fahrudeen,
    Am a little confused here... you say you want to load Transaction data and load it into the InfoObject?? what was that??
    You can load the Transaction data only into your data targets such as InfoCube and DataStore Objects... If you are loading the data into your InfoObjects, then that would mean that you are loading the Master data for which obviously you won't have your data targets listed in your InfoPackage... Only in case of loading the transaction data would you have your Data Targets listed in your InfoPackage...
    Regards
    Manick

  • My text messsage is not visible during my program works

    I have write a programm, to write a file format in an other.
    The files are so big that the programm work very long. So I made a text message  that show the program is still working.
    In the beginning was working well. But now the text messages is no longer displayed.
    I have no idea what the problem is.
    some code:
    int CVICALLBACK ReadCallback (int panel, int control, int event,
    void *callbackData, int eventData1, int eventData2)
    int iConfiguration;
    switch (event)
    case EVENT_COMMIT:
    SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 1);
    GetCtrlVal (panelHandle, PANEL_Dataset_Conf, &iConfiguration);
    Function_Worker(iConfiguration);
    SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 0);
    break;
    case EVENT_LEFT_CLICK:
    break;
    return 0;
    The function_worker does made nothing with the GUI but it works with a DLL. Is this a problem?
    Do you have any ideas?
    Solved!
    Go to Solution.

    Somewhat more elaborate I'd suggest to modify your code as follows:
    case EVENT_COMMIT:
        SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 1);
        ProcessDrawEvents ();
        GetCtrlVal (panelHandle, PANEL_Dataset_Conf, &iConfiguration);
        Function_Worker(iConfiguration);
        SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 0);
        break;

  • Contact names not displaying during calls, but only in logs

    Many names in the address book not showing up
    Hence, when i get a call or make one, the name doesnt come up with the number
    after the call, the number with the name is visible in call log as outgoing or incoming or missed
    in the database details it shows my address book having 238 numbers (these are the numbers currently visible)
    so how is it that the names are visible in the log and not in the address book and also not visible during a call
    Please help
    (a search for this topic hasnt got me the correct results)

    Same thing happened with mine! Still haven't figured it out, but **bleep** it's annoying!

  • AED not visible in Cenvat Utilization.

    Hi ! All,
    At my Client site, in Excise scenario, in addition to BED,ECess,SE Cess, AED ,is also used.
    Now friends, is this AED cenvatable,  because this AED part is not visible during cenvat utilization.
    Do I need to some configuration so that I will be able to view it.
    Thanks,
    Regards,
    DGN

    hope u talking about AED additional duty of excise  and not ADC additipon duty of customs
    If u talk of AED
    then according to law AED can       be motivated agains AED only
    So you will have to have a sales document with AED amount ,    IF u have     sales doc with AED then     Input AED will also be seen in J2IUN
    hoipe this helps

  • Mx459 will not let me enter number in WEP key, only allows symbols/letters. how do i enter numbers?

    mx459 will not let me enter number in WEP key, in only allows symbols or letters. how do i enter numbers?
    john
    Solved!
    Go to Solution.

    This might help
    Press the SETUP button on your printer's control panel.
    Using the arrows, select DEVICE SETTINGS, press OK.
    Select LAN SETTINGS and press OK.
    Select Wireless LAN Setup and press OK.
    If a message appears to press the WPS button, press STOP to cancel.
    Select STANDARD SETUP from the next screen that appears and press OK.
    Highlight your access point or router and press OK.
    Press OK again to confirm the access point name.
    Enter your passphrase using the keypad to the right.
    At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.
    Press OK when done.
    The LCD screen will say "Connected" if the password is correct.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers.  Sometimes it works, but most times not...very frustrating.  Any recommendations?

    When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers.  Sometimes it works, but most times not...very frustrating.  Any recommendations?

    Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)

  • I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was

    I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
    RJ@

    Try to connect on Live chat one more time.
    Still not connected , better to contact Adobe Phone Support
    Click on Phone option and check once :
    Contact Customer Care

  • ENTER keystroke on text input entry not always submitting

    I have run into a problem where once a user has completed the
    text input entry and has clicked the ENTER button to "submit" this
    entry, the ENTER keystroke event is not always "submitting" the
    input entry. Sometimes it requires hitting the ENTER key two or
    three times before the slide moves on.
    We are loading the captivate files into a custom flash
    interface (but there are no key events in this interface that could
    conflict with the captivate's ENTER keystroke) and I have the
    maximum number of attempts set to 1.
    I did some debugging from the custom flash interface, and in
    the captivate .swf, the proper input field has focus and the ENTER
    keystroke is being captured
    Has anyone else experienced this problem? Does anyone know a
    possible solution?

    I’ll try to explain the problem more clearly.
    I want the name that is loaded from the textfile into the combobox to be selected from the list.
    Once an item is selected everything works just fine. But I don't want the user to select the item, when the name is loaded into the combobox. The user will expect that the item will be selected automatically. Is that possible?
    The function I want is the opposite of combobox.selectedItem. Instead of having a selected item and getting the name, I have a name and I want to select the item.
    The name is a correct name, because the name is saved from the combobox.

  • I'm using firefox 3.6.4 dutch. On some sites telephone numbers are just visible during 1 second, then they disappear. When refresing they are again visible during 1 second.

    I'm using firefox 3.6.4 dutch. On some sites telephone numbers are just visible during 1 second, then they disappear. When refresing they are again visible during 1 second.
    == This happened ==
    Every time Firefox opened

    Hello,
    the issue of phone numbers disappearing can be fixed by disabling the Skype add-on:
    #Go to Tools > Add-ons .
    #Find the Skype add-on in the list.
    #Click the Disable or the Uninstall button.
    #Restart Firefox.
    --Tobbi

Maybe you are looking for