Entering a hypertext in a smartform - how to
Hi
Does anyone know if it is possible to insert a hypertext link into a smartform ie 'click here' will take you to a web page.
The URL we have wraps to a second line which causes problems when cutting and pasting into Internet Explorer. Some external users are having to do this on a eRecruitment smartform.
Hope you can be of help.
many thanks
Julie
Hi Priya
Thank you for your response. This is what we are currently using but the parameters that we send within the URL wraps to a second line. When users cut and paste both lines into a browser, sometimes only the first line is transferred to the browser's address bar.
Many thanks
Julie
Similar Messages
-
I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?
CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
directly for serial number issues. -
My neice is trying to use the Build-a-Bear website, which requires Flash to login and run its services. However, the plug in is loading correctly, but we cannot enter letters into the login box, just numbers.
It's not a firefox problem with entering text as on other websites (such as BBC) text can be entered into plain search boxes.
How can I resolve this?Is there any timescale as to when it's likely to be resolved?
-
I am able to receive email, but when I try to reply I get an error message to go to settings and enter a password. My password is there and I have re-entered it with no success. How can I enable send feature from my I Phone?
You have to go to SMTP settings for your email account and enter a password there. Sended and receiving are two different activities managed by 2 differet servers, and each may require a separate user ID and password.
-
While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?
Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri -
I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can giveUnless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40. -
I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?
You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.
-
I just purchased a software upgrade to OSX Lion. I received an e-mail that says, "To install your software, you simply launch the Mac App Store, click "Redeem"• found under Quick Links and enter your content code(s). How do I "launch the Mac App Store?"
Assuming you are running OS X 10.6.6 or later (10.7.x Lion, 10.8.x Mountain Lion or 10.9.x Mavericks), go to the Apple Menu (top left-hand corner of the screen)>App Store and it should become clear from there.
-
In the smartform how to change the company adress in the standard form
Dear experts,
In the smartform how to change the company adress in the standard form.
Regards,
Balakrishna R.VHi,
Go through this link below:
change in SAP Standard Address
Hope it helps
Regards
Mansi -
HT5858 ipad ask to enter passcode to restore my ipad. how to enter passcode.
passcode problem
ipad ask to enter passcode to restore my ipad. how to enter passcode.If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
SMARTFORM: how to create 3 copy (each copy can print more than one page)
SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 pageHello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
EXPORTING
COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
EXPORTING
COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM -
I m using macbook pro my enter key is not working suddenly how can i solve this problem?
i m using macbook pro my enter key is not working suddenly how can i solve this problem?
I have tried to delete but Com.Apple.keyboardtype.plist is missing therefore I cannot reset the keyboard
/Library/Preferences/com.apple.keyboardtype.plist -
When I enter the Quick time 7 to register the pro version all it does is cycle back to the name field. I have check the info that I entered and it seems correct. How do I register?
Enter in the name, exactly as in the email Apple sent you, and the key, and then press the Tab key. Do not press the Enter/Return key.
Hope this helps. -
i just replaced my desktop but now i cant edit etc. I signed in but no good. Do I need to enter my License key again and how ?
What product are you trying to use to edit etc.: Acrobat ? Have you installed it? Have you activated it?
-
Incorrect Password is auto. Entered and i don't know how to stop this.?
When I open a certain page on Safari an incorrect password is automatically entered and i don,t know how to stop this from happening.
I just delete and reenter, but this is a pain. How can i fix this?
alSettings>Safari>Autofill>Clear all. You will have to start over again with all of your passwords.
Maybe you are looking for
-
I currently have an old version of Photoshop Elements, it is version 5.0. I recently upgraded from my old Windows XP computer to a new Windows 7 computer. My question is: Can I install this version 5.0 on my new Windows 7 computer without any prob
-
How to create a new style sheet in RH11?
Could someone plz let me know how to create a new style sheet in RH 11? THe online help here: http://help.adobe.com/en_US/robohelp/robohtml/WS38E03F49-65B5-4564-8DF3-EEA1DE8C6B59.html ...says to find the icon of the pad and pencil: in the View > Tool
-
Where do I fine new people to video chat with ?
I have been using iChat for a couple of years and have several men that I chat with from time to time. I am a 68 year old retired commercial artist. Just looking to expand my list of contacts. I am a Christian, I don't make a practice of chatting wit
-
SQL function for adding street, city and postal code.
I would like to know how to add to my code to display the addresses. Any ideas? SELECT departments.department_name "Department Name", locations.state_province "Mailing Address" FROM departments, locations WHERE departments.location_id=locations.locat
-
Discount error for cutomer hieararchy
Hi, I have set up cutomer hieararchy A with partner function 1A. Then setup partner determination for account grp 0001 (Dow chem as main customer). Created Z001/z002 account group by copying 0001 as Dow branches at two different places in the same co