Entering a Pin# for a conference call

I am trying to call a conference call with a pin#. The call connects and asks me for the pin#. I click on the dialpad icon and the diapad appears. I put the pin# in on the dial pad but the call just keeps asking me to enter the pin# even though I have already entered it. It simply is not recognizing the pin# I entered on the dial pad. Any suggestions on how to fix thiis?

I am having the same issues.
I am trying to call a conference call with a pin #. The call connects and asks me for the pin#. I click on the dialpad icon and the diapad appears. I put the pin # in on the dial pad but the call just keeps asking me to enter the pin# even though I have already entered it. It simply is not recognizing the pin# I entered on the dial pad. Any suggestions on how to fix thiis?
It started a few versions back.
I have been using Skype for years, I have a premium account.
It started while I was still using OS X Mountain Lion
It is still happening on OS X Mavericks
I am on the latest version of Skype for Mac v6.9 - (701)
I dial the number for a conference call.
I then bring up the dial-pad once the conference call instructions start.
It is truly intermittent from here. It will either not work, partially work, or not work at all.
I have tried using my number pad on my computer (which I used exclusively until I had issues)
I have tried holding down the keys longer
I have tried muting skype
I have tried using the mouse to select each number
Sometimes disconnecting from the call and calling back will work (not likely)
Sometimes exiting Skype entirely and reconnecting will work. (not always, but seems to help some.
I keep updating to the latest version to solve this rediculous issue but, of course, it doesn't.

Similar Messages

Jabber can not enter the PIN for voice mail

I installed Cisco Jabber 8.6 on the android mobile,And registered jabber to CUCM8.0. In the same time, CUCM8.0 integrated with Unity Connection8.0 via SCCP, Everything is normal.
Tested using any of a telephone call Jabber, it can received voice mail, and shows have a voice mail on the android mobile. then, Hear the tone of the Connection system :"please enter your PIN." However, in any case the PIN can not be submit to the Unity Connection, System reminded over and over again:please enter your PIN.......
I guess the mobile's dial pad can not be supported by Unity Connection, Or other reasons.
help!!!

The Android client is a SIP device and uses RFC2833 for DTMF relay. Unity Connection supports RFC2833 when integrated with either SCCP or SIP. The first question that comes to mind: is the call invoking a transocder/MTP that would be in the media path? For example, if Jabber is using G.729 and you haven't enabled that on CXN or you're requiring a TRP.
I would start with a Wireshark capture from the CXN server to see: a) what the far-end IP address is for the RTP packets; and, b) whether you see the RFC2833 packets arrive. If the sender IP isn't the Jabber client a media resource got invoked which may be dropping the RFC2833 packets. If the IP is correct but you don't see the RFC2833 packets arrive you could then run a Wireshark or collect SDI logs with SIP stack trace enabled from the CUCM node that Jabber is registered to. That would allow you to see the SDP negotiation at call setup to see if RFC2833 even gets negotiated.
Please remember to rate helpful responses and identify helpful or correct answers.

Custom / New Softkey for Instant Conference Call

Hello all, I have just started working with VOIP in the last few months at a new position, and the manager her wants to have a custom button on the phone when in a call that will automatically conference in the security desk. This would be in the event of a malicious call such as a bomb threat and so forth. I have downloaded the SDK and read through most of the documentation and I have seen references to things such as
Dial:2000 (where 2000 represents the number to be dialed)
in the Custom SoftKey section of the IP Phone Services Application Development Notes.
I appreciate any help provided.
PS the Phone that I am using is a 7970.

7970 has 8 speed dial buttons and you could assign an IP phone service to one of the speed dials. PhoneTop Messenger allows you to send a pre-typed text message to a pre-configured IP phone group. For example, you can send a text message (with an optional ringer) to all security phones when user presses one of the speed dials (which is assigned to this IP phone service). It is really a one-step process. You could also initiate an audio page as well, which is effectively the same as a conference call. In fact, it may be better than a conf. call as recipients do not need to pick up/answer the phone to hear the audio and it tells them who is initiating the page.

I have an iphone 5, and got it 3 weeks ago. I turned my phone off earlier and its now asking to enter my 'Pin' for my sim and i have NEVER activated a pincode for this sim? i am now currently locked out and have been for the last 2 hours... someone help!!

l

Is it specifically asking for a pincode for the SIM? If so you will need to contact your cell carrier.

Using conference call dial in numbers with iPhone

On my old Blackberry I used to be able to call a conference call dial in number and it was set up so that it would dial both the 1-800 number and then the participant code for the conference call. Anyone know if it's possible to do the same with the iPhone? Of course, with my Blackberry I was dialing in through clicking on the number in the actual meeting invite whereas with the iPhone I am dialing into a number in my contacts list since the iPhone is not yet compatible with Lotus Notes. Speaking of which, I've heard rumors before that the iPhone will one day be compatible with Lotus Notes. Anyone know when that might be? I've ditched the Blackberry but not having my email/calendar/contacts synced with my work system is a big pain.
Back to the conference call question, I tried seeing if I could add a pause after dialing the 1-800 number so that it would dial the meeting password after connecting but that didn't work, even when I added like 10 pauses.

CUCM does not have this capability, if you forcefully need users to enter a pwd you'd need to look into MP or do some UCCX/UCCE scripting for this.
You can use Unity/CUC as a middle man so you can use a supervised transfer and then Unity will let you choose if you want to let someone in or send them to VM, but it won't ask for any passcode.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Conference call on Iphone

I don't understand how to combine 2 calls for a conference call. I tried the Merge Call button (from memory, I think that is what it is called), and all it did was put one on hold and connect me to the other person, back and forth, it would not combine the calls.
Does it matter who calls in vs me calling out?
Can u walk me through the steps and are there any surprises?
thanks
bob

Check the iPhone manual, page 50 http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
From the Manual:
Conference Calls
You can talk to more than one person at a time, and merge up to five calls, depending on your carrier.
Note: Conference calling may be an optional service in some countries. Contact your carrier for more information.
Create a conference call:
1 Make a call.
2 Tap Add Call and make another call. The first call is put on hold.
3 Tap Merge Calls. The calls are merged on one line and everyone can hear each other.
There is also a graph there that lets you know about adding and dropping more, but I'll let you read that yourself.
Hope that answers your question.

Need Support for Palm Pre Call Waiting

I've had my palm pre for a month about now and notice a number of issues with its call waiting feature that need to be addressed. Here is the list:
1) I can't drop 1 call without dropping the other call: this means that if I'm on the phone with person "A" and receive a call from person "B", though I can switch between the two easily enough, I can't end the call between person "A" to talk to person "B". What's even worse, even if person "A" hangs up, the pre still keeps the call connected until I hang up my phone. This is a serious issue when you're calling outside of any promotional time, nights, or weekends.
2) in a conference call, I can't end one conversation without ending both conversation. So again, if I have both person "A" and person "B" on a call and I connect them through a conference call on my pre, I can't end the conversation with one without ending it with the other. A real pain in the butt.
I just want to know two things asap since I know this is something that'll take time to resolve (if it can be resolved)
1) is this a hardware issue or a operating system issue?
2) does conference calling really kill my minutes the way it look like it does? I'm leaning toward yes from evidence I have, but I'd like to hear it from the pre reps.
Post relates to: Pre p100eww (Sprint)

1. This functionality sometimes works and sometimes it does not. But can you answer the other part of the post. The PALM pre give the user no one to drop the other call. Mine is worse. If the other user hangs up CONFERENCE is still there; If they hang up I'm not in a CONFERENCE but the PRE does not recognize this state at all. Therefore you can't add another person to the call again.
2. This one does not affect me as much since I have the simply everything plan. But I would def. pay attentiont my bill and complain to SPRINT every time this occurs.
3. HAS ANYONE OPENED A TICKET WITH PALM FOR THE CONFERENCE CALL / CALL WAITING ISSUE?

Create a contact that will dial an external conference and enter a pin, using Lync

Greetings!
Let me describe a scenario.
On my cellphone, I can create a contact that will dial an external conference number that is not a Lync Meeting, insert a pause (with commas) enter a pin with a # at the end, because that particular conference system asks for pin followed by #.
The phone number for that contact on my phone is 18005551212,,,,1234#
Is there a way to do something similar to a Lync contact? or, as an Outlook contact that will pause and then enter the pin chars?
Well, thanks very much for reading my question!

Landis said no a while back:
http://social.technet.microsoft.com/Forums/lync/en-US/794fb7a5-f55e-4ca7-8f2e-d6264d7607f0/lync-conference-id-automatic-dialing?forum=ocsclients
And I don't believe that's changed. Effectively, the number you typed for the contact isn't what's sent. That gets normalized into what's sent. I think the only way to send pauses between DTMF is manually through the dialpad.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls. please help as I use it for conference calls

Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on?

One-way video for conference call?!

My place of work is looking for a way to have a one-way video conference call. So one person (administrator) would be seen by all on the conference call. (No need to see othe participants). If this is possible, how many people can be on the conference call? 25?
If it's not possible, anyone no of any web conferencing programs that have something with this capability?
Many thanks.

You should be able to call them normally (p2p or group) then enable your webcam for them to see you. If the people you are calling are incapable of viewing a video stream due to their computer's processor (non SSE2 or non-video capable mobile processor) or because they have an older Skype client, then video could be disabled for the group call. Not having a webcam would not be the main issue. Also if you are standard phone calling them in the group there would be no way for them to see you either.

HT201303 I bought a gift card in my account and introduced new, but asked me to enter the account once again I do not remember which email account is not recorded it, but I have the card number and PIN for my account Can you help me?

I bought a gift card in my account and introduced new, but asked me to enter the account once again I do not remember which email account is not recorded it, but I have the card number and PIN for my account Can you help me?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

HT204088 I bought a gift card in my account and introduced new, but asked me to enter the account once again I do not remember which email account is not recorded it, but I have the card number and PIN for my account Can you help me?

I bought a gift card in my account and introduced new, but asked me to enter the account once again I do not remember which email account is not recorded it, but I have the card number and PIN for my account Can you help me?

Help you what?
We are itunes users just like you.
Not sure I understand your question.
Please explain.

I went to the apple store to get a power cord for my husband's mac pro and the technician gave me a power adapter instead. My husband has a conference call before the stores open and I can exchange the adapter but he needs power for his computer before th

My husband needs a new power cord for his Mac Pro. I went to the apple store and the clerk gave me a power adapter by mistake. He has a conference call before the store opens and I can't get him another power cord. Is there a way to power up his computer?

You posted in the MacBookPro forum. Is this a Mac Pro or MacBook Pro? If it's the latter, it has a battery.

Entering a Pin# for a conference call

Similar Messages

Maybe you are looking for