Entering charct. values at the time of GR

Hi All...
We have a Issue regarding raw material receiptu2026
We r getting Ores (ROH) from different parties, they send test certificate with every lot. We need to enter the % of nickel or Chrome etc at the time of GR for PO. After that stock will move to quality stock where they will check the parameters and record. Purchase dept will compare the results.
I tried this by giving Material class (001) for the material, but itu2019s not asking the characteristic value at the time of GR.
My requirement is at the time of GR, system should ask the characteristic value..we dont want to manage stock in batches..
Please share ur thoughts.
srini

During GR U can only enter Characteristics Value for Batch Class under Classification. For which Material should be Batch managed and use calss type 022 (if batches are at plant level) or 023 (if batches are material or client level). Create a class type of 022 or 023 and assign to Materail master and also activate batch management for the material and then try to create GR, it will allow to enter the values for characteristics.

Similar Messages

How to force the user to enter a value in the prompt

Is there a way to force the user to enter a value in the prompt before they run the report?
We have a customer specific dashbaord. The user has to enter a customer number in Dashbaord prompt on a first page of the dashboard. We store that value in a presentation variable. That presenatation variable value is being referenced in all the other pages of the dashabord. If the user does not enter a values in the first page and directly navigates to the other pages on the dashbaord, the reports on the other pages start to run for all the customers. Is there a way to force the customer to enter a value in the prompt before running any of the reports on the dashboard?
Thanks!

by Answer prompts, do you mean Column prompt?
I can not use Column prompt in this senario as the user should not have to enter the same customer number over and over again when he navigates from one page to another on the same dashboards. If there is a way to default the column prompts then this would be an acceptable solution.
I have already defaulted the prompt to a value as suggested in hte blog, but the issues occurs when the user erases the defaulted value. Is there are way to set the default value within the report?
Can you please explaing mroe about option 3 regarding Java Script. Also please let me know what other options there are so that I can check whether they will fit my needs.
Thank you very much!

HT201365 How do I change settings so I do not have to enter pass code all the time?

How do I change sttings so I do not have to enter pass code all the time?

The passcode is a key security feature to ensure that nobody has access to your device and data without you entering the passcode in. You can only have the option to have it on or off so if you wish to disable it then go to "settings>general>passcode lock" to do this.

I can't enter any value in the Text field, after loading flash files

Hi to all,
In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
This problem happens after change the jre version from 1.6 to 1.7.
I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

Since the last update of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you check why it taking so long since the update on firefox.

since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.

I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.)

How we can check Item UNIQUE value at the time enter the value

hi,
check unique item value.When entering value.
using record group.
How?
which trigger we can use?
Thanks & Records
venkat

Hi!
Do you want to check if a value already in your table?
if so, use the when-validate-item trigger like this:
begin
if
:your_block.your_item is null
then
return; --> nothing to check, exit trigger
end if;
for l_rec in ( select 1
                  from your_table t
                  where t.your_column = :your_block.your_item
                  and ( :your_block.rowid is null OR rowid != :your_block.rowid ) --> if it is not a queried record
                  and rownum = 1 ) loop
message ( 'The value ' || :your_block.your_item || ' is already in existence. Please enter another value or use our nice list-of-values.' );
message ( ' ' ); --> shows an alert not only a message in the status line
raise form_trigger_failure;
end loop;
end;Regards

How can i restrict the qty/value at the time of invoice

Hi,
Can you plesae tell me at the time of MIRO how can i restrict the user not to enter the qty more than in MIGO & PO
Thanx

You cannot restrict the qty in MIRO. because it is used for partial invoice receipt.
E.g in some cases 100 nos of qty might have received in one GR. But the supplier may give 3 invoices for this. that is the reason u cant restict this
reward if useful
SK

PO field values at the time of Rlease.

Hai folks,
I want to know the values for fields at the time of PO release..
LIke if i create a PO and Release it and change it and release it(so on many times)
How will I know the values of fields at each release time..
My report has to display all released PO's in a day..with the values at time of release..

How wil;l I know all rleased pos from cdhrd?
even if i consider cdpos field frgzu ,how will i know vlaues of other fields (lets say item text for all items) at this record creatrion
also can i know the correct concept..If a po is having relaease startegy,wat does it mean? i need to display only when relesed.
also with changes in po only when released.
how to capture these from tables?
Edited by: kumar gaurav on Apr 1, 2010 11:25 AM

Iterator not reflected on entering new values for the row

Hi,
I am having an editable table coming from an EJB Stateless Session Bean. I created a data control out of the session bean and dragged and dropped the output
of the method in the session bean as a table in the jspx page. On click of the "Create" link, I have an action listener that creates a new row in the top of
the table.
DCIteratorBinding iter = DFUtils.findIterator("getMultSortReportListIterator");
RowSetIterator rowSetIter = iter.getRowSetIterator();
Row row = rowSetIter.createRow();
row.setNewRowState(Row.STATUS_NEW);
row.setAttribute("reportName", "");
row.setAttribute("sectionName", "");
row.setAttribute("userId", "");
row.setAttribute("viewCriteria", "");
rowSetIter.insertRowAtRangeIndex(0, row);
rowSetIter.setCurrentRowAtRangeIndex(0);
After the row is created, I enter values into the row and click on "Save" link. The action Listener for the save link is:
BindingContainer bindings = getBindings();
DCIteratorBinding iter = (DCIteratorBinding) bindings.get("getMultSortReportListIterator");
//Read the entered values from the iterator
Row currentRow = iter.getRowAtRangeIndex(0);
String reportName = currentRow.getAttribute("reportName").toString();
String sectionName = currentRow.getAttribute("sectionName").toString();
Long userId = Long.parseLong(currentRow.getAttribute("userId").toString());
String viewCriteria = currentRow.getAttribute("viewCriteria").toString();
//Store to database
MultipleSortReport multipleSortReportBean = new MultipleSortReport(reportName, sectionName, userId, viewCriteria);
OperationBinding operationBinding = bindings.getOperationBinding("persistMultipleSortReportTest");
Map params = operationBinding.getParamsMap();
params.put("multipleSortReportObj", multipleSortReportBean);
IMultipleSortReport multipleSortReportInfo = (IMultipleSortReport)operationBinding.execute();
The problem is that after entering the values into the newly created row, I have to tab out of the row and click with the mouse to place the cursor in the
end of the next row's first field for the iterator to reflect the entered values. If i enter the last column in the new row and after entering it I directly
click on "Save", the newly entered values are not reflected in the iterator. The iterator is still reflecting the old values of the row i.e. "" empty fields
as it was initialized during Create Row.
Can you help me fix this problem. I want the iterator to reflect the newly entered values without having to tab out of the row.

Marvin,
I would suggest starting to debug your new CT in the following order
1) ABAP - run directly in SAP to confirm you are getting the data you expect
2) Set breakpoints in ABAP and confirm your transmit is calling into your ABAP as expected
3) Java - Add breakpoints and step through your Java class to confirm it is getting back the data as expected
4) ATE - Look at the CT in the ATE to view the contents
--Bill

Different tax condition value at the time of GR as compared to PO

Hi All,
The issus is as follows ;
We have maintained the tax condition type JIPC (Input Sales Tax) by t-code FV11 as 3% and subsequently created the PO.
But when we are doing GR against the same PO in Accounting Document the GR/IR clearing Account is getting posted with the value of tax 2%(Non deductable tax).
We have checked the validity period of condition type JIPC on day of GR is 3% only.Despite showing the PO screen 3% of non deductable tax accounting document of GR is picking the 2% of tax in GR/IR clearing account.
Thx in advance.
Shiwanshu

Hi Anji ,
   thanks to reply. but my problem is some deffrent. I take an example for that:
I am doing MIGO at this time PO price was 100 , VAT 4% condition JVRD now post this document suppose mat doc is 5900000021.
I will get in my report
Doc no.:5900000021
price   :100
VAT    : 4
Condi: JVRD
now some one make change in this PO like price 150 , VAT 3% condintio JVRN.
if now i will execute my report then i will get.
Doc no.:5900000021
price   :150
VAT    : 3
Condi: JVRN
but i need old data when GR wad post as above.

Cannot enter correct values in the SQL server express 2012 using labview

Hi everyone,
I am trying to enter the 2D array I get from DAQ into the SQL server express 2012 using Labview. When I am run the software, it connects with the table but doesn't enter the correct values. It only enters the "0" for each column of the table. I have attached the VI as well as the screenshot from the database server.
I am also writing the same 2D array data into the text file and I get the correct readins there.
Is there something I am doing wrong here.
Attachments:
test.png ‏251 KB
test3.vi ‏96 KB

If you had read the QL manuals or reference books, you would be aware SQL Server doesn't do multidimensional arrays.
I prefer BLOBs or VARCHAR(MAXCHAR) as an alternative. I enter the values in formatted string values delimiter separated.
But how to deal with multidimensional arrays. Well up to 3-5 you can use simple value for each "dimension". So the lowest dimension
would be comma delimit. The next set of values and each succeeding set for each 2nd dimension values would have the "set" of values separated
by a ":" or semicolon. For the third I use the ":" or colon to separate each 2D block of the 3rd dimension. This can all be easily reparsed
with a multidimensional parser for the application. Should be simple to build. (e.g.. Use string arrays to parse the higher dimensions
and numeric array for the lowest dimension). The VARCHAR(MAXCHAR) has an upper data bound of 2GB! If you have to save more
than 3 dimensions for most all applications, you don't understand how best to analyze the test data and may want to give it more
thought to optimize the operation as well as the design, so it doesn't get too complex. By the way I use Data Clusters built in the
data order and type as for SQL Server Data Table. This makes the design of the SQL Server interface easy as pie .

How can a user enter a value in the field which is in read mode.

Hi all,
I am creating a badi for the valuation class.when ever i execute the mm02 transaction.if an invalid valuation class is entered,my error message is poping up.but it is coming in the display mode.i should get the valuation class field in the read mode.
Regards,
charita.

Hi Charita,
Use information message instead of Error message.Then it will not give u that field in non-editable mode.
<b>Reward points if it solves ur query or answer is helpful</b>
Thanks
Chinmay

Calculation of Amount in LC value at the time of MIGO (Movement 101 )

Dear Gurus,
Kindly give me the logic for calculation of 'Amount of LC' value at GRN against Purchase Order using t-code MIGO.
Also let me know how this value gets chnaged with below mentioned parameters:-
1. Assesable base Value- Excise Tab MIGO
2. Exicse Value
3. tax code in PO
Regards
Soumen Das

closed

I have to enter my details all the time in newly updated Aperture 3.4.3

Hi,
I have to enter all my details again and again in Aperture 3.4.3, any idea why?
cheers

When you say "details" do you mean your licensing information, or something else? If the former, look at the discussion Re: Aperture prompts me to re-enter my registration information every launch

Cash Journal : How to enter Gl account at the time of entry.

i want to give bank GL account when i want to deposit cash in bank...we are having many bank accounts..but i can't create multiple cash transaction in config..

Hi,
In FBCJC2, you can assigne a bank account to that transaction type and also select the check box "Account Modifiable"
Then in FBCJ, you will be able to change the bank account.
Regards,
SDNer

Entering charct. values at the time of GR

Similar Messages

Maybe you are looking for