Entering Names with Email Addresses

Hi All.
New user here.
Would someone mind giving me some tips on entering names with email addresses into a list of magazines in Numbers?
Is there a way to de-activate the clickable link for email addresses temporarily?
Is there a way to enter these from an external document such as Pages in a single cell? Right now I do this and (the paragarph return?) causes them to scatter across a number of cells in a way I don't understand.
Is there a way to have the addresses get listed with name and then the email address on one line and then the next name and address on the next line etc? Right now if I hit return it throws me down to the next cell.
Finally, is there a way to get the column headings to show up near the column alphabet at the top when i am scrolled down to a point where I can't see the name for the column? Right now if I am scrolled down it is hard to know which column to put information into.
Thanks for any help as I get it moving.
Regards.

Hotwheels22 wrote:
Would someone mind giving me some tips on entering names with email addresses into a list of magazines in Numbers?
Is there a way to de-activate the clickable link for email addresses temporarily?
Yes, in the Hyperlink Inspector.
Is there a way to enter these from an external document such as Pages in a single cell? Right now I do this and (the paragarph return?) causes them to scatter across a number of cells in a way I don't understand.
Double-click in the cell before pasting.
Is there a way to have the addresses get listed with name and then the email address on one line and then the next name and address on the next line etc? Right now if I hit return it throws me down to the next cell.
Instead of hitting Return, hit Tab.
Finally, is there a way to get the column headings to show up near the column alphabet at the top when i am scrolled down to a point where I can't see the name for the column? Right now if I am scrolled down it is hard to know which column to put information into.
In Sheet View mode, select "Freeze Header Rows" in the Header control on the Format Bar.
Thanks for any help as I get it moving.
You may still have to refer to the guide.
Jerry

Similar Messages

I want to copy the name with email address from Mail like I could before Mavericks

Hi There
I have resisted upgrading to Mavericks for all this time because Mavericks now stops the name of the contact being copied when I copy the email address from the sender. What is now copied is: '[email protected]'
What I want and what it used to be before Mavericks is: 'Dave Garnish <[email protected]>'
I know it sounds petty but it has stopped me upgrading for all this time, but now I need 4k monitor support.
Thanks in advance anyone who may have the answer to this.
Best
Dave

The following Terminal command used to enable the use of the name along with the email address:
defaults write com.apple.mail AddressesIncludeNameOnPasteboard -bool YES
(Change YES to NO to undo the change.)
I don't know if it still works.
You can also affect this feature in the mail message via Mail, Preferences, Use Smart Addresses. When unchecked the sender's address gets the name and angle bracket thing.
charlie

How do I create a second account with my husband's name and email address?

My account works fine. I read about Profile Manager, but couldn't find it. I can find Account 1 with my name. I see Account 2 listed, but no name or email address even though I typed that information into some form along the way.

Assuming that you are happy to share Thunderbird, and be able to see each others' messages, then there's no need for the profile manager.
If you want to keep things separate, then it's better to set up separate user accounts in the operating system. Each of you would then have your own private space for data and settings, including each having your own Thunderbird profile.
So, your husband already has his own distinct email address and account, set up with an email provider?
In Thunderbird, you'd use '''File|New|Existing Mail Account…''' (in the traditional menu) or '''[≡]|New Message|Existing Mail Account…''' (with the Application Menu button) to add his account to Thunderbird. I think you may have already done this given that you say you have entered the email address (and its password?) already.
I think at this point a screenshot of Thunderbird may help us understand what you do and do not see.
https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
Use Paint or similar to blot out any data you'd prefer not to share.

Names are associated with email address in Mail but not in Contacts. How do I fix this?

When writing a new email if I begin typing someone's name, it automatically starts showing matching first and last names and email addresses. So if I start typing Bob it'll start showing matching contacts and have selected by default Bob Doe <[email protected]>.
This is great in Mail but in Contacts it doesn't work.
If I start searching for Bob, there are no results. Instead the only result there is the email address. So I have to know my contacts email addresses instead of their names when I'm dealing with Contacts.
Is there a way to sync Mail and Contacts or something so Contacts gets the associated names of the email addresses?
Thanks

The same thing is happening here since the 10.10.2 update but as yet I can't find a solution but I am hoping it's an Apple problem that will get sorted out.
Eventualy.

How to find out the user name and email address from SAP user id?

Hi experts,
In sto3n I find out the the user id with most navigations. I like to know his name or email address to contact him. Which table stores the user details? how to do it?
Thanks in advance.
Sharat.

hi,
The below tables will give only the name .
USER_ADDRS
USER_ADDR
USER_ADDRP
USR02
i think you need email address .
you can use this Tcode : su01d
and give the user name and excute it
i hope it will help you.
Ram
Edited by: Ram velanati on Jun 30, 2008 6:57 PM

How to email a list of names and email addresses?

I have a group of about 60 people with various amounts of data in each of their Address records.
I want to send an email to the group with a list of the names and email addresses of everyone on the list. I don't know how to do this neatly. Got any ideas?
If I put the group name in "to" in Mail, each person gets a messy non-alphabetical list with commas. If I send a group vCard, I send more data than I want to send. If I make a printed list, I have to convert to a pdf file and send that which is not nearly a simple as a text list.
Is there any way to export fields of my choice from Address into either text or spreadsheet format?
I want to send a list like this, but with tabbed columns.
Steve Jobs [email protected]
Barack Obama [email protected]
yourname1 yourname2 [email protected]
Thanks,
Phil

Thanks, Thomas for the prompt response, but the pdf method has two problems.
First, it's got to be in landscape mode, or the email address word-wrap. That makes for a five-page list. I want to send a 60-line text list.
Secondly, there's no way to eliminate the label (work, home, other...) from the email address field.
I will use the pdf method if no one comes up with a better idea.

Wrong name in email address and damaged index in address book

I have experienced this problem for months now. I have a Mac Pro at the office and MacBook Pro at home. The address book is synced with .mac. At random I will receive emails and the mail program will attach the wrong name with the address ( John doe [email protected] will be displayed as mary smith [email protected] ) this also happens in mail I have sent and copied myself on. The incorrect name is usually one that exist in my address book. The second part of the problem which may be related is the index for both address books will get damaged. Every few days I have to discard the address book index file ( AddressBook-v22.abcddb ) which fixes the index issue for a few days. The computers nor the applications ever crash. I wonder if the .mac syncing could be key to both computers having index issues. Rebuilding the address index does not fix the wrong name issue. Both computers are 10.5.2. I feel there is some deeper corruption issue that rebuilding that one index file does not correct. I have also rebuilt all the mail boxes.

SOLUTION: my ultimate solution to the address book confusing contact info in ichat, mail, etc. was to go to ~/Library/Application Support/AddressBook/ and delete the AddressBook-v22.abcddb file. back up your contacts first!!! but after you delete and relaunch, Address Book will rebuild using the info from the Metadata folder. worked like a charm.
d

How to show users display name and email address in open social widget?

Hello experts,
Is it possible to retrieve users display name and email address with opensocial javascript e.g. Login widget seems to load user data (and userData.firstname) during the site init. Is this something that could be consumed or is there some opensocial data request that could/should be used. Any working sample widget spec would be appreciated.
Best regards,
Ville

Hi Ville,
in the logon widget, we also use the data retrevied from siteInit.loadData.data.user. However, this widget is part of the out of the box openSocial widgets, it is being released with the product code, not as a separate OS widget deployed on HANA Cloud Platform.
If you'll do window.parent.siteInit you'll probably will get the data you are looking for, but this isn't the official public API, so you can use it but we cannot commit on keeping this structure.
Why do you need this information in the widget level? Does your widget require authentication or is it for personalization needs?
The best way is to retrieve this info on the java side using HAHA Cloud Platform APIs and send them back to the client.
Look at this - SAP HANA Cloud Platform SDK >
Package com.sap.security.um.user
Interface:
User
This interface provides read access to user data and is an extension of Principal.
UserAttribute
The interface represents abstraction over a user general attribute, such as an e-mail address.
UserProvider
This interface represents the service interface which provides read access to a user implementation.
Inbal

Table name for email-address field

Hi,
What is the table name for email address field present in address tab of vd03 transaction

>
abap developer wrote:
> adr6 table is for email address present in contact persons tab in vd03 transaction.I need the table name for email address field present in address tab in vd03 transaction.
every thing will be stored in ADR6. with Different addressnumbers contact Person address is different and customer address is different.
there will be 2 different entries in ADR6.

ERROR: Your web form must capture customer name and email address.

Hi,
I keep receiving this error message when trying to checkout and submit a payment.
ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page.
The strange thing is it's only happening in chrome. It works perfectly in IE and firefox, the form submits and takes me to the order confirmation page. I've tested it on multiple PCs so it's definitely a chrome issue. Does anyone have any advice as to what could be causing this issue with chrome?
Thanks,
Pete

Check your eCommerce web form in the admin has the ID - 211729
This is what the form ID is, if you have deleted it and made a new one it will not Marry up
The things you normally look for with this error is The first name and last name along with email fields have the right ID and name parameters on the input. The javascript is picking those up so it looks like that is working.
So next is the form in the admin marrying up with the form on the page or in this case the Registration Buy layout.

How do i fix the "web form must capture customer name and email address" error?

Hi all,
I have a webform that is submitting securely to the bc servers. I get the response:
{"SystemMessage": { "success": False, "message": "ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page." }}
I have verified that the "FirstName","LastName","EmailAddress" are actually gettting sent with their corresponding values. I can't seem to figure out why i keep getting this error. Can someone please lend a helping hand?!? Thanks guys... here's my code:
var rAction = 'https://site.worldsecuresystems.com/FormProcessv2.aspx?WebFormID=85886&OID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={module_cid}&CC={module_urlcountryc ode}&Referrer={module_siteurl,true,true}&JSON=1';
var rData = 'FirstName='+escape(fName.val())+'&LastName='+escape(lName.val())+'&EmailAddress='+escape (email.val())+'&Username='+escape(username.val())+'&Password='+escape(passwd.val())+'&Pass wordConfirm='+escape(passwd2.val())+'&BillingAddress='+escape(baddress.val())+'&BillingCit y='+escape(bcity.val())+'&BillingState='+escape(bstate.val())+'&BillingZip='+escape(bzip.v al())+'&PaymentMethodType='+escape(paymentMethodType)+'&CardName='+escape(cName.val())+'&C ardNumber='+escape(cNum.val())+'&CardExpiryMonth='+escape(expMonth)+'&CardExpiryYear='+esc ape(expYear)+'&CardType='+escape(cType)+'&CardCCV='+escape(ccv.val())
$.ajax({
type: 'POST',
url: rAction,
data: rData,
success: function(msg){
console.log('success');
$('#result').html(msg);
error: function(msg){
console.log('error');
$('#result').html(msg);

Ok -- after testing this out a little on my own I think it must have to do with not properly serialzing the data you are passing in the ajax function. In the example I linked to earlier they are just serialzing the form data and it works because it converts the data in the form's input fields to URL encoded notation.
If you aren't using an actual form on your site to mimick the example I linked to then when building your "rData" string instead of using the "escape" function for each of the parameter values, you should be using the "encodeURIComponent" function instead which instead of escaping characters will convert it to URL encoded notation. That's probably your issue. Here's more about encodeURIComponent(): http://www.w3schools.com/jsref/jsref_encodeURIComponent.asp
Try this with the rData variable instead:
var rData = 'FirstName='+encodeURIComponent(fName.val())+'&LastName='+encodeURIComponent(lName.val()) +'&EmailAddress='+encodeURIComponent(email.val())+'&Username='+encodeURIComponent(username .val())+'&Password='+encodeURIComponent(passwd.val())+'&PasswordConfirm='+encodeURICompone nt(passwd2.val())+'&BillingAddress='+encodeURIComponent(baddress.val())+'&BillingCity='+en codeURIComponent(bcity.val())+'&BillingState='+encodeURIComponent(bstate.val())+'&BillingZ ip='+encodeURIComponent(bzip.val())+'&PaymentMethodType='+encodeURIComponent(paymentMethod Type)+'&CardName='+encodeURIComponent(cName.val())+'&CardNumber='+encodeURIComponent(cNum. val())+'&CardExpiryMonth='+encodeURIComponent(expMonth)+'&CardExpiryYear='+encodeURICompon ent(expYear)+'&CardType='+encodeURIComponent(cType)+'&CardCCV='+encodeURIComponent(ccv.val ())

Why does iPhone automatically enter my entire email address when I simply type "gmail" and how to I turn it off?

Why does my iPhone automatically enter my entire email address when I simply type "gmail" and how to I turn it off? It also does it whenever I type it in Safari (but not Chrome) and it only does it with one of my email addresses and not any of my other ones (i.e., yahoo, hotmail, etc.).
Thanks so much for your help!

I don't see visible underscores in that login form, but they appear to be entered (that form isn't high enough to show them for me).
You can verify that in the Scratchpad and use Execute > Display after pasting the below posted code.
* Firefox/Tools > Web Developer > Scratchpad (Shift+F4)
<pre><nowiki>document.getElementById("userid").value;</nowiki></pre>

I have a Domain name with email forwarding to my Service Provider which worked very well when I had a PC. Now I have iMac and have changed to IMAP from POP3 so I can sync. between iMac and iPad but how?

I have a Domain name with email forwarding to my Service Provider which worked very well when I had a PC. Now that I have iMac I have changed the account type to IMAP from POP3 so I can sync. between iMac and iPad but how?
I do receive emails into my iMac for which I have 3 email accounts but am struggling on how synchronise between iMac and iPad so that both are up to date at all times. I have also set up a iCloud email account thinking this was the way to go but have drawn a blank.
Any help would be very much appreciated.

Linc Davis,
I have set up my email address both within my iMac and my ISP as IMAP accounts and I receive all emails without problem on my iMac. I have also set up an iCloud email address using my iMac.
I have enabled the email within "setting" on my iPad and have used the iCloud account. I have sent emails from the iMac to iPad using the iCloud account address and vice versa. I have also sent emails from the iPad to the iMac using my non-iCloud email address and they have gotten through.
The one thing I would like to have is for the iPad "mail" mailboxes to mimic the iMac "mail" mailboxes and both to be "in sync". I am not really interested in using the iCloud email address for my email but would really like to use my "normal" addresses as these are what most people know me by.
Do I need to set additional accounts within the iPad which are the same as the email accounts I have within the iMac and my ISP? I have reached the end of my knowledge as regards email synchronsing.
Thanks

Importing a group of names and email addresses from EXCEL to address book

I want to create a new group in my address book, so I can send one email to multiple addresses. I have an EXCEL document that contains the names and email addresses. Is there an easy way to import them into my address book from EXCEL?
Thanks, Teri

Hi,
I'm having the same problem. I'm trying to import 300 addresses from an Excel file into Address Book. The Excel file has been converted to tab-delimited (txt). I've gone through and deleted any extra line breaks within fields, commas, etc in the addresses.
When I go to Address Book and ask it to import the Text file, I get the dialog window showing me the fields it will import, but when I click on "OK", the program just freezes. Also, it tells me in the dialog window that it won't import specific fields like Street 2, City, State or Zip and there is information in all of those fields for every record to import.
I've been working on this for three weeks now and am at my wits end. I have never had a database program be so difficult to work with.
Any ideas?

How can I send an email to a group in my address book, but hide the individual names and email addresses?

how can I send an email to a group in my address book, but hide the individual names and email addresses?

You used to be able to do this through leaving unchecked the box in preferences "when sending to a group show all member addresses". However, that feature failed some time ago (two or three years?) and the only way to hide the addresses now is to put the group in the BCC field.

Entering Names with Email Addresses

Similar Messages

Maybe you are looking for