Entering numbers in point.i.e 300.05
I have an number field i.e quantity.
it always take an value in kgs like 1000,150,99,300 etc.
if I want to enter value like 300 kg and 50 grams how would I do that?
because if i enter 300.05 ,it round it to nearest value i.e 300.
Hi
Can you explain where do you get the rounded values when you enter a value with decimals? Do you mean when you leave this field the value is automatically rounded? Or is it saved in the table as rounded? As far as I know Apex, it does not do this automatically. If it is rounding value when you leave the field, it means there is some JavaScript /Dynamic Action which is doing this. If it is saved as rounded value in the table, the Column in the Table may not be allowing decimal values. E.g. It may be Number(10) instead of Number(10,2).
Zulqarnain
MaxApex Hosting
http://www.maxapex.com
Similar Messages
-
mx459 will not let me enter number in WEP key, in only allows symbols or letters. how do i enter numbers?
john
Solved!
Go to Solution.This might help
Press the SETUP button on your printer's control panel.
Using the arrows, select DEVICE SETTINGS, press OK.
Select LAN SETTINGS and press OK.
Select Wireless LAN Setup and press OK.
If a message appears to press the WPS button, press STOP to cancel.
Select STANDARD SETUP from the next screen that appears and press OK.
Highlight your access point or router and press OK.
Press OK again to confirm the access point name.
Enter your passphrase using the keypad to the right.
At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.
Press OK when done.
The LCD screen will say "Connected" if the password is correct.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
How to enter numbers in Arabic font in the fields
Hi Everyone,
I installed Adobe Reader 10.0.1 multi-Language and I am able to enter Arabic alphabet in the fields, but when I enter numbers in the fileds, it is English. I don't have this issue in MS-Word. i.e., both letters and numbers depend on my keyboard setting and is English or Arabic respectively. The numbers setting in windows in "depend on context" and I think is fine. Do you know how I can fix this issue? Is there any setting in Adobe that overwrights the Windows setting for numbers?
Thanks a lotI won't say I am very clear about this topic. But I will give an example, which seems to show that number (in the double type) is logically of the form -000.00 while locale spacific String object can be both of the forms "000.00-" and "-000.00"
// you can show the string below (formatted) on a JLabel with the following
//<JLabel_instance>.setFont(new Font("Lucida Sans", Font.PLAIN, 22));
NumberFormat nf = NumberFormat.getInstance(new java.util.Locale("ar","EG"));
//NumberFormat nf = NumberFormat.getInstance(new java.util.Locale("fr","Fr")); // compare
DecimalFormat df=null;
DecimalFormatSymbols dfs= null;
if (nf instanceof DecimalFormat) {
df = (DecimalFormat)nf;
dfs = df.getDecimalFormatSymbols();
dfs.setZeroDigit('\u0660');// set the beginning of the range to Arabic digits.. this can be commented out
df.setDecimalFormatSymbols(dfs);
String formatted = nf.format(-1234567.89); -
I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but auto function does not see them. Went back and put a small split in the timeline in fcp and exported to mpeg 2 again and auto function does not see that either? Manual msays to manualy enter split poind in DVDSP but can't find any way to enter that split point in DVDSP? How can I manualy enter a split point in DVDSP 3 or 4?
Elizabeth/Roger Cook FilmsThis is definitely not the behavior I see. When I left click it adds a marker,
When I right click, I see the following
Do you have any OS hacks installed on your computer or have you changed the mouse behavior in system preferences: mouse? If not, I'd suggest you run digital rebellions preference manager and reset your dvdsp preferences.
https://discussions.apple.com/docs/DOC-2491 -
Entering numbers on the alpha/nume​ric keypad
How do i enter numbers on the alpha/numeric keypad of my HP 6500? trying to put in network password.
ThanksHi,
Simply use the keypad as you type an SMS (atleast used to type on the old generation cell phones )
Simply click the number key several times till the required number appears on the screen.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Entering numbers into textfield
Hi,
is there any way of entering numbers into a textfield whereby the user doesn't have to toggel the device inorder to produce said numbers- a bit like a calculator application; any suggestions welcome
JamesSure, it is very easy.
Read about TextField Input Constraints.
They are
ANY
EMAILADDR
NUMERIC
PHONENUMBER
URL
DECIMALYou need NUMERIC or DECIMAL.
You can set them in two way
1. public void setConstraints(int constraints)2. Pass to TextField constructor:
TextField(String label, String text, int maxSize, int constraints)e.g.
TextField myTextField = new TextField("myLabel", "myText", 32, TextField.NUMERIC)Read also about Input Modes. It can be also useful. -
How could I enter a break-point in badi
Hello
How could I enter a break-point in badi. In se24 object type is "IF_PURCHASE_ORDER_ITEM_MM" and Method is "SET_DATA"Hi,
You need to create an implementation in SE19.
And give the defination name(BADi name) there and Click on interface Tab
Double click on One of the method and write break point there.
break <user name>
and activate the implementation
Follow the Link
[http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm]
In SDN also there are many related threads.
Regards
Sandipan -
I can't enter numbers into the calculator using the keypad - however I can use the calculator with the kwyboard numbers or the mouse using the nu,mbers on the calculator. In preferences, - keyboard - it says that the F6 key toggles the num lock system - on my computer the F6 key does nothing. I am running Snow Leopard, haven't downloaded Lion yet. Anyone help me with this?
Paulusing OS 10.6.8 - INtel Core 2 Duo, keyboard is wired (USB) came with computer, cpmputer purchased in January 2006 - I have not tried using it in other apps - just tried it in Quicken, and Quicken froze requiring force quit. Generally only use it for manually making check-book entries. I know that in the past I have used the keypad - tho I admit it has beena while
-
Cannot enter numbers from num pad or keyboard
Cannot enter numbers from the number pad or the keyboard.
That's an odd one, alright! When you state "format" I presume you're not somehow inserting the hyphen, correct? You're dialing 5551234 or 5555551234.
If a Restore does not correct the problem, presumably a Reset will not either, but try that (reset is press and hold the sleep/wake and home buttons until the Apple logo comes up (~10 seconds, ignore the slide to power off prompt, wait for the logo).
Else, I suspect a visit to an Apple Store (or a call to AppleCare) is your best bet. -
I am having a problem entering my redemption code. I can enter numbers but not any letters. It's like the computer is locked up when I try. My letters work on any other application
It sounds like you are trying to use a redemption code (alpha-numeric) where you are supposed to be using a serial number (strictly numeric). A redemption is normally used to acquire a serial number... the serial number is what you enter to activate the software.
Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html -
When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers. Sometimes it works, but most times not...very frustrating. Any recommendations?
Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)
-
I am using an update statement to enter a number into an
access databse where the field is set as an interger format. The
syntax used in the update statement is order = '#form.order#',
When this is processed I revieve the following error:
ODBC Error Code = 37000 (Syntax error or access violation)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in
UPDATE statement.
SQL = "UPDATE tbl_images SET mnname = 'Whitney Looking',
dimensions1 = '5', dimensions2 = '7', dimmeasure = 'Inches',
denomination = '£', price = '42.00', bgcolour = 'DADAFC',
medium = 'Inks', order = 19, framedorunframed = 'Framed', approved
= '0', makeimagelive = '0', subject = 'Animals' WHERE
tbl_images.imageid=2356"
I assume this is caused by the database recieving the number
in a text rather than interger format.
Could someone please let me know how I need to format the
update statement to over come this (or whether this may be casued
by another issue
Thanks
NeilDan's point about using a column named "order" is most likely
the culprit. Words like SELECT, WHERE and ORDER are reserved words
in SQL and should be avoided as names for database fields. Try
changing the name of your database field and running the query
again.
Also, I noticed the fields "approved" and "makeimagelive"
seemed to also contain bit or integer values. Try using the same
formatting with those fields as you did with the order field.
In fact, you can replace all of your query values with
<cfqueryparam> and let coldfusion decide which ones will
received surrounding quotes based on the cfsqltype. -
Okay, here is the deal.
Whenever I login or a something asking my password pops up I can't enter the numbers while using shift.
I have to put CAPS LOCK on for some reason, and I don't know why.
I recently formatted my mac and re-installed Mountain Lion and since then this error occurs. Very strange.
Any ideas?Geoff,
I couldn't correct all the font duplicates because some were used by the system.
If you want to know more about OS X font management, read Font Management in OS X, by Kurt Lang.
Not sure what you mean by Update (Combo) I have automatic updates turned on. Do I need to do still more to assure an updated system?
The only reason I suggested that was because your Apple Discussions "My Settings" system profile lists Mac OS X (10.6.3) as your current system.
;~) -
Entering numbers on captivate 3
When I run the project in assessment mode Captivate allows me to enter text and it will then move on to the next slide (using mouse clicks or shortcuts). However, when I do this with numbers it sticks and will not move forward. When i click back into the text box and press enter (this is the shortcut for this slide) really hard it finally moves to the next slide. It only does this with numbers and I dont know if I am using the wrong type of box or not. If anyone knows how to rectify this please help. I can send through attachments to explain what I mean.
Thank youHi,
Simply use the keypad as you type an SMS (atleast used to type on the old generation cell phones )
Simply click the number key several times till the required number appears on the screen.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I am trying to enter a zip code into the spreadsheet but the cell keeps dropping the zero. How do I format the cells to enter the numbers as text?
Thank you!Hi RJ,
Welcome to Apple Discussions and the Numbers '09 forum.
Select the cells you wish to format.
Open the Inspector.
Click the Cell Format Inspector button (42)
Use the popup menu in the inspector to select Text.
Done
"Formatting Table Cell Values for Display" is one of the topics covered in Chapter 4, "Working with Table Cells", of the Numbers '09 User Guide. This guide, and the iWork Formulas and Functions User Guide, can be downloaded using menu items in Numbers's Help menu. I would recommend downloading both, reading at least the first chapter (and the pages addressing this question) of the Numbers guide, and keeping the F & F guide for use as a reference when working with formulas.
Regards,
Barry
Maybe you are looking for
-
My laptop is broken and I don't want to buy a new one. Is there any way to retrieve all of my music on itunes via my ipad and can I manage my itunes account only on my ipad?
-
What is the "normal" operating tempature for a 1025-nr
I have a dv-7 1025-nr, and the top of it seems to hotter than it should be. I can hear the fan running and it seems to be running at its highest rpm However it just not keeping it cool enough I actually have the back of the laptop propped up so it w
-
What is the different betwwen...
I'm a little confusing about a basic stuff in JAVA.. Say that i'm using the implement keyword to use the Frame class in the AWT package.. Why i can't use the extends keyword like in an applet? Why not to use implement with applet as well? what is rea
-
Multiple selection screens with status gui
Hi, I want to make a report with two selection screens and i should create a status gui for these two. So, I've tried to do, the following: * FIRST SCREEN SELECTION-SCREEN BEGIN OF BLOCK bk WITH FRAME. PARAMETERS: pa(200) TYPE c. SELECT-OPTIONS: so F
-
In the recent days I had many problems after upgrading to Snow. Some involve 3rd parties software.. some Mac OS Adobe Softwares seem to have some problems. In particoluar I work with Premiere and it continuosly hangs (turning wheel). Generally it see