Entering opening balance for a new company
Hi all
I am using AP, GL and CM. After successful testing on test environment the customer now is forwarding in live environment.
He has prepared open balance for all accounts and i should migrate these balances in the system.
This balance sheet prepared from the customer is balanced so debits equals to credits.
The currency of this company is ALL, and in this document there are few accounts that are in EUR and USD, but in total the converted amounts of these accounts(accounts that has balance in foreign currency) together with other accounts in ALL are balanced.
Now i have to enter in the GL module three different journals, one in ALL, one in EUR and the last one in USD, with the exchange rates given by the customer.
The question is here. These three journals are not balanced, and i wanted a suggestion which is the best way to enter the open balance for this customer.
Thank you and best regards
Hi Octavio
So the document sent from the customer is like this:
Acc. No------------Debit ALL-----Credit ALL----------Debit EUR-------Credit EUR----------------Debit USD----------Credit USD
Acc. 1--------------100
Acc. 2--------------150-------------------------------------100
Acc. 3--------------150-------------------------------------100
Acc. 4--------------200-----------------------------------------------------------------------------------------200
Acc. 5--------------200-----------------------------------------------------------------------------------------200
Acc. 6---------------------------------800
Now accounts in foreign currency should have their balances in foreign currency and the converted amount is giving the balance in local currency.
so i have to register three journals or am i wrong?? As you can see the journals in each currency are not balanced.
Thanks again
Edited by: user567002 on Nov 26, 2010 3:13 AM
Edited by: user567002 on Nov 26, 2010 3:15 AM
Similar Messages
-
Hi Expert,
How to enter opening balance for last year to closing balance to this year opening balance explain deeply helpful for me Thanks in advance.
Example
All Bank A/C, Cash Book, Vendors, Customers, like that how to enter closing to opening balance.
With Warm regards,
SelvaDear,
As per SAP standard there is no need to carry forward the balances as the system will do a virtual carry forward into next year opening without creating any FI documents.
If your business scenario demands then you can use the transaction code F-02 for posting a carry forward balances, this will not effect any of your balances but only creates a FI document.
If your R3 version is SAP ECC5 or 6 then use the transaction code FAGLGVTR -
How to enter opening balances for business partners
pls let me know end to end process to enter opening balances for business partners.
thank
reemaHi Reema....
There are two processes you can enter OB for BP.
1. Bill waise
2. Total
If you want to go for Bill wise then its better to upload the AP and AR invoice under service category via DTW.
If you want to go for Total BP balance then go to Administration> System Initialization> Opening Balance--> Opening Balance Business Partner.
Regards,
Rahul -
Opening Balances for Previous Periods
Hi Experts,
There is a client requirement of entering opening balances for GL for previous periods before going live.
eg it is required to have OB for 2006,2007 and 2008 before live transactions are entered into the system.
Please enlighten on how to carry out this.
Regards,
AsapHi Asap,
You could only have one OB for one account. If those OB for different years are for different accounts, it is ok. Otherwise, you have 2006 OB only. You may create JE to get something like OB for 2007 and 2008.
Thanks,
Gordon -
HOW TO CARRY FORWARD RG1 CLOSING BALANCE TO OPENING BALANCE FOR NEW FISCAL
Hi Experts
How to carry forward the RG1 closing stock at the year end to opening balance of Rg1 for new year.
Wt are the steps required for closing activity of RG1 and carry forward closing balance of last year to opening balance of new year.
ThanksHi Rohan,
For RG1 and RG23 A Part I and RG23 C Part I
Go to SE16, here enter Table Name - J_2IRG1BAL and Click on "Create" button in initial screen, it will give the maintenance screen. Here mainatin following;
For each of these materials, you have maintained the material form in table J_2IRG1BAL as below. Do not make any entries in fields that are not listed below:
EXGRP - Materialu2019s excise group
DATUM - Date from which RG1 report is required, normally the date of going live
MATNR - Material
FORM - Enter P (Packed) or L (Loose). Do not leave this field blank.
WERKS - Leave this field blank.
OP FN UOM, OP BN UOM, CB FN UOM - Leave these fields blank. All quantities in this table are updated in the base unit of measure of the material
USNAM - User ID of the person filling out the table.
CPUDT - Date of entry
CPUTM - Time of entry
Note: - This is to be done before J1I5, J2I5.
Also refer link;
Update of Registers RG 1 and RG 23 (Part I)
For RG23 A Part II, RG23 C Part II and PLA
Go to SE16, here enter Table Name - J_2IACCBAL and Click on "Create" button in initial screen, it will give the maintenance screen. And maintain following;
Excise Group
Data element for Register names
Date
Plant
Basic duty (OP BAL)
Basic duty (CL BAL)
Basic duty (EXAMT)
Extract Indicator
User name
Entry Date
Entered at
Note: -
1. Enter OP BAL, CL BAL and EXAMT all as same as opening balance. For e.g. opening balance for RG23ABED is 1400 then this value is to be entered in all the 3 fields.
2. You have to enter separate line items for all the accounts;
RG23ABED
RG23ASED
RG23AAED
RG23CBED
RG23CSED
RG23CAED
PLABED
PLASED
PLAAED
PLACESS
RG23AECS
RG23CECS
PLAECS
RG23AAT1
RG23CAT1
PLAAT1
3. Enter Date is one day before of the opening. For e.g. if opening date is 01.04.2008 then enter it in 31.03.2008
Then go for J2I5 - Extract and J2I6 - Print Utility
use following
http://help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.doc
http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/8e113999724854e10000000a11405a/content.htm
Reefer this link for complete Excise transactions
http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Re: Excise -initial upload
Hopefully this will helpfull to resolve your answer.
Thanks & regards,
Pankaj Mahajan -
How to change the BP-customer Control Account for entering Opening Balance
Hi experts,
I am working on a project where I have used the segmented chart of account and segment is branch.
Project is under SAP B1 8.8 PL 05.
Customer has 2 branches. Now both the branch have different control account for debtors. Customer (BP) master is common for both the branches.
Now at the time of entering BP-Customer opening balance, I do not find the provison to select/change of control account. So all the opening balance entered will go into one control account only, which is set in business partner master for particular customer.
In SAP B1 8.8 at transaction level like Sales Invoice, there is provision to select the control account. Now I believe entering opening balance is the similar functionality as Sales Invoice and there should be provison for selection of control account to user.
Anyboady has any Idea / work around ?
Incase there is no provison then, I believe Product development team should take this in development of SAP B1 8.8.
BR
Samir GandhiHi,
I suggest you to import BP opening balance by JE template of DWT in which you just put account code as your control segmented account and additional information in "shortname" field with customer/vendor code.
Hope this helps,
Son. -
How to find opening balance for customer?
Hello Abapers,
I have a requirement as i need to find opening balance for particualr customer in a company.This is related to FI/CO modules.Please solve my porblem.
Waiting for your favourable replies
Regards
MaruthiHi Maruthi,
Opening balance for a cutomer for a given period, u need to first find closing balance of that customer in the previous period. For eg. Suppose u want to find opening balance for customer 'A' for month of Nov'06, then U have to find wot was his closing balance in at end of Oct'06. Hope this solves u r problem -
Passing the Opening Balance for the 1st peroid of the quater
HI ,
Passing the Opening Balance for the 1st peroid of the quater: The report format is as follows
Code-Desc-Amount
1001-AAAA-1000
1002-BBBB-2000
1003-CCCC-3000
The output is based on quaterwise. If I enter the first period of the particular quater, it will show the reports for the whole quater. I created the report and working fine.
But the problem is that, if it is AAAA, i need to pass only first period of that quater else total of the quater.
Can you please, explain me how to do this....
Thanks and Regards
RajeshHi Pooja,
RSA3 only shows records in setup table, which is collected by MCNB.
by MCNB, you could only get the current opening stock, and in order to calculate the open stock in previous month,
you'd have to load the history movement via 2lis_03_bf.
Thanks & B.R.
Vince -
How to get Opening Balance for Stock Report in Crystal Report?
Dear Experts,
I am using SAP B1 8.82.
I am new to crystal report and now trying to do a monthly stock report with the following format:
Species BatchNum OpeningBal QtyInKD QtyInRD QtyInCD Adj ClosingBal
ABC T1234 17.43 10.16 17.43 0.00 0.00 10.16
ClosingBal = OpeningBal + QtyInKD - QtyInRD - QtyInCD + Adj
Parameters:
- DateFrom
- DateTo
- WarehouseFrom
- WarehouseTo
I am having problem in defining formula to get the opening balance for each item. The report is grouped by species, whscode & batchNum.
Anyone please share with me how to write the formula for opening balance in stock report.
Thanks.
Best Regards,
LengHi
Check the below discussion it may helps you
Opening Stock Batchwise
With Regards
Balaji Sampath -
How to query the opening balance for an specific account for an spec. date
Hi all,
for my user query I need to calculate the opening balance for an cash account for an specific date.
Any ideas, how can I do this?
Or may be you know a field in an SBO table that already contains information I need...
Best Regards,
InnaHi Inna,
to find the opening balance for an account or a business partner, please see SAP Note [1114253|https://service.sap.com/sap/support/notes/1114253] :
Symptom
How to find the opening balance of a business partner or G/L account.
Other terms
Account, customer, supplier, vendor, creditor, debitor, start, initial, first, opening balance, business partner, G/L, SAP Business One
Reason and Prerequisites
Consulting
Solution
There are several possible approaches:
Approach 1 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data -> find the Business Partner
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 2 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data.
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Double click on the column header 'Posting Date' to find the earliest transaction on the business partner account. This transaction could be opening balance, verify this with the company accountant.
Approach 3 - G/L Account Opening Balance:
1. Go to Financials -> Chart of Accounts -> click on the account name once.
2. Click on the orange link arrow next to the field 'Balance'.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 4 - Business Partner and/or G/L Account Opening Balance:
1. If using SAP Business One 2005 SP01 or earlier, go to Reports -> Query Generator -> click on 'Execute'.
2. If using SAP Business One 2007 or later, go to Tools -> Queries -> Query Generator -> click on 'Execute'.
3. Ignore the red system message in the bottom of the screen.
4. Click on the pencil icon in the top left of the window, the field with 'SELECT *' will change colour to white, then yellow when activated by clicking in the field.
5. Copy the query below:
SELECT T0.[TransId], T0.[Debit], T0.[Credit] , T0.[CreatedBy], T0.[TransType] FROM [dbo].[JDT1] T0 WHERE T0.[TransType] = '-2' and T0.[ShortName] = '[%1]'
6. Click on 'Save' and give the query an appropriate name and select the appropriate category.
7. Click on 'Execute'.
8. Click on 'Existing Values'.
9. Select the G/L account or the Business Partner name from the list and click on 'OK'.
10. The system message 'Records retrieved by this query #' (# = number of records) will pop up. Click on 'OK'.
All the best,
Kerstin -
Internal Order Configuration for a new company
Dear Experts,
Hi! I need help on the Internal Order creation for a new company which previously not maintained the Internal Order. Can Experts can provide me the T-code for the configuration. Any guidance given is very much appreciated. Thank you! _Hi,
What figures do you have in mind? I/O is a cost collector, thus, if you have a cost which is to be posted on the I/O you should mention when creating a FI/MM document. For example, if you have FI doucment which is posted, let's say, via FB50, you enter your relevant I/O in the document line.
Regards,
Eli -
Opening balance for vendor in debit
Hi
When I post the opening balances for vendors it is showing the vendor balance as debit.(+) Is this correct or it should show vendor balance in credit and customer balance as debit ?
Regards
SekarHi,
This was the JE:
VENDOR 1000 (Debit)
OP BAL(Asset) 1000(Credit)
Remarks: BPartners Opening Balance
Thanks and Regards,
Sekar
Edited by: S. Gamaliel Sekar on May 17, 2011 11:38 AM
Edited by: S. Gamaliel Sekar on May 17, 2011 11:39 AM -
Problem in getting opening balance for multiple GL Account
Hi,
I am working on a Trail Balance Report in which i am trying to fetch the data for the opening balance for multiple GL Accounts but it is not coming accurate.. Here is the link to the code which i am using currently right now:-
http://docs.google.com/View?id=dfxswwff_13fgpdcbgt
here i am showing the logic for the data of previous year only... i.e. data from begining to 1 day less of the date-low.Hi,
It is a tranparent table which is getting data from the 2 other tables,the filling of this table is right. The execution of this query is right in the program but the problem comes when it is trying to calculate the opening balance for the respective GL Account present in the query it is not doing it. i.e. if there are 2 gl account ids having 3 rows of data each it is not calculating the of it in a single row.. i hope it is clear now... -
How to get Open Balance for the year and Total Ending Balance?
For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM -
How to calculate Opening balance for a customer?
Hi Experts,
How to calculate Opening balance for a customer? I am trying to develop a report where in i have to get opening AR balance,current sales,adjustments etc of a customer. Please let me know how can i do this. I have some tables with me KNC1, BSAD, BSID.
Thanks in Advance.
Sharat Chandra.Say for example ..
Get the opening bal for Customer 'K' in CCode 'C1' in 2008 ..
First get all items from BSEG ..
Select * from BSEG where KUNNR eq 'K'
and BUKRS eq 'C1'
and GJAHR eq '2008' .
Sum all the DMBTR values (This is the total value).
Second get the cleared items form BSAD for the above entries;
Select * from BSAD for all entries in BSEG where KUNNR and BUKRS and XBLNR eq BSEG-XBLNR.
Sum all DMBTR values ( this is cleared value).
Third substract the cleared value from total to get Open value.
This is a overview .. you should go to the tables and look for fields and etc.. and then define the logic meeeting your requirements .... this is a genric undersatnding ....
Thanks,
Aditya. V
Maybe you are looking for
-
How to delete song on iPhone which can't be wiped?
Hi there, after about one full day of fighting with iTunes Match (including full deletion of iCould Library by using an empty iTunes Library), I finally have a working iCloud Library with all my songs and artwork (tested in my iPhone 4S). Unfortunate
-
Can my ancient Macbook Pro be fixed?
I have an almost 6 year old Macbook Pro (dinosaur!) It is on the fritz...constantly shutting down, screen getting all digitilized/scrambled, etc (as well as some body damage). Does anyone know where to go to get this repaired or refurbished? OR, woul
-
How to get modification timestamp of user in GAL
Hi, Sorry for bothering you but I have one more question. In general I have performance issue. I am downloading users from GAL with all details and it takes about 3h. GAL has about 17000 users. I didn't found any solution to make it faster. But in ne
-
OSP (Oracle Software Packager): 'Missing Component' when Verify Stage Area
I'm trying make a stage area for "Oracle Net 9.0.1.2.0". ( I haven´t find the way to Install alone this product with the CD's of Oracle 9iDS Release 2 ). When I import Oracle Net 9.0.1.2.0 ( with the option "Import dependee" selected ) and make the S
-
My preview keeps crashing and this is the message that it tells me. What does it mean? Process: Preview [9244] Path: /Applications/Preview.app/Contents/MacOS/Preview Identifier: com.apple.Preview Version: 7.0 (826.4) B