Entering text in safari

In safari browser, while entering text in controls, the texts are getting doubled.(i.e if i enter "2", it's displayed as "22" and "s" means "ss"),
How to overcome this?
This happens only for safara, others browsers its working fine.

Tim, what Extensions have you added on to Safari?

Similar Messages

Unable to enter text in text boxes in Safari

When using Safari 6.0.2 I frequently cannot enter text into a text box. If I open a new page, it will work fine for a while and then develop the same problem. Anybody else have this problem and find a solution?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

IOS 8 Safari hangs entering text

Since upgrading to iOS 8 Safari is regularly hanging when I enter text. It is so bad I have had to install Chrome to post this report (no problems at all with Chrome needless to say).
Safari just hangs and there is nothing to be done until iOS tears the browser down and reloads - at which point any entered text is lost ...
Any suggested fixes?
(iPad 3 by the way)
Thanks,
Och

Same here on 4th-gen iPad. 100% reproducible in certain spots. If I start to backspace and delete text, it gets real sluggish. I'm wondering if the spell check is causing it to hang. iOS 8 IS A DISASTER!

Safari crashes when entering text into entry fields

I recently bought a MacBook 2.0 (White) and have set up accounts for multiple family members. On one (standard) account, Safari immediately crashes as soon as you try to enter text into an entry field, e.g. to do a search on Google or Yahoo. I've already tried dragging the Safari pref files to the desktop and icon files to the desktop and rebooting both Safari and the entire machine with no success. However, if I log onto any of the other accounts, Safari works fine. Initially, (for about two weeks), it worked fine, it just started acting like this recently. Toggling Java and Javascript off, also doesn't solve the problem. I'm about to create a new account and trash this account entirely, but I was wondering if anyone has seen this problem and knows what's gone wrong.
2.0DualG5, 15"PBook1.5, MacBook2.0 Mac OS X (10.4.6)

Thanks Yang, you pointed me in the right direction. I was able to edit and delete items in the Autofil - Other Forms, but when I tried to do the same thing on the Autofil - Address Book Card, it crashed immediately. Further investigation showed that if I tried to open any applications related to the Address Book like Mail or Address Book itself, they immediately crash also! This is kind of weird because this account hasn't been set up for Mail and as far as I know there are no entries in the Address Book. If I uncheck "Using info from my address Book card", Safari doesn't crash, so now it looks like the problem originates from Address Book or possibly Mail.
RadiCal

On an iMac I can't enter any text in safari or Firefox header bar. In all my program's I just have the arrow cursor and can't change to any tools in the tool bars - please help!

I cant type any text in safari or and in all programs i have the arrow cursor and can't change to any tools in the tool bars - please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I'm having the oddest situation... On my 13" MBP, when trying to enter text into a Facebook comment box; my delete key is totally non-functional. I works just fine everywhere else, just not in the comment box. Cannot delete characters.

I'm having the oddest situation. When I attempt to enter text into a Facebook comment box, my "delete" key doesn't work.
It's just fine EVERYWHERE else, I just cannot delete characters from a comment box.
What might I be missing? I don't know what's up.
JP
MacBook Pro Retina 13"
Safari 8.0.2
Yosemite 10.10.1

I'm having the oddest situation. When I attempt to enter text into a Facebook comment box, my "delete" key doesn't work.
It's just fine EVERYWHERE else, I just cannot delete characters from a comment box.
What might I be missing? I don't know what's up.
JP
MacBook Pro Retina 13"
Safari 8.0.2
Yosemite 10.10.1

Can't enter text in certain forum dialog boxes (java?)

On certain forums and sites, I am unable to click on a dialog box and enter text. When I click in the box, it either highlights the line or the whole box but does not allow me to enter any text - the keyboard does not appear. I do not have an option to paste text either. The text/dialog boxes look similar to the one I am writing in right now. For my online classes, I use Moodle, and that's one of the sites that causes this issue. It was an issue also on my iPhone but I was hopeful that it would work differently on the iPad.
There are two methods I've found to enter text. One is through HTML and the second is unreliable -sometimes if I click in the box while I refresh, I can get the keyboard to pop up.
Any thoughts or suggestions? Java is enabled and I've tried clearing everything.

According to what I read on another forum entry - to do with WYSIWYG editors - this is a problem with Safari. Apparently, it doesn't handle Javascript correctly in all cases. I administer Joomla sites and Safari on a standard machine, let alone an iPad, gives me a lot of grief. So, on any other machine I use Chrome or FireFox. Sadly, this isn't an option on an iPad. We're stuck with Safari - whether we like it or not!

Text disappearing Safari Mountain Lion

I've noticed that from time-to-time when entereing text in forms, forums, and other dialogue boxes the text I've typed will vanish.
If I close safari and re-open it, the problem goes away for a while, only to return after an indeterminate amount of time.
Whilst this is not going to stop me using safari, it's more than a little annoying.
Any ideas on what's causing it and how to fix it?

From the menu bar, select
Edit ▹ Substitutions
and uncheck Text Replacement.
If there's no change, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then uninstall them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by reinstalling it. That will revert its settings to the defaults.

Enter shortcut in Safari

Is it possible to <Enter> the text in a page's textbox using the keyboard in Safari, or is the user a slave to the mouse? (The "Enter" key doesn't work, and I haven't been able to find any information on a keyboard shortcut for <Enter>.)
If Safari does for some reason does not support a keyboard command for entering text in a textbox, does it have a shortcut for selecting an object that has the focus of control (hightlighted), so that one can <Tab> to a button and then select it without having to use the mouse?
Thanks to anyone who can point me to this basic functionality. I tried to find it; I really did!
- Henri

Hello henri:
Welcome to Apple discussions.
I am not sure I understand your question, but let me try to flounder around and address the issue.
In a web page text box, the <enter> key acts as a "return (new line)." To send the text, you have to click on a "radio button." If I am missing your question, ask again.

Remote app in iOS 7 doesn't bring keyboard when entering text.

I tried to use the remote app with my new iPad air with iOS 7 with and when I tried to make a search for a movie it won't bring the keyboard as before when entering text. The funny thing is that I have an old iPod 4th gen with iOS 6, and that one still brings the keyboard every time text needs to be entered, even still has the option to hide and bring out the keyboard. Is this feature gone forever in iOS 7? Or is missing and will be added later?

This is now fixed. The remote has two modes. It starts with an interface similar to iTunes to play music or videos from your library, on the top right side it has a keyboard (mine appeared greyed out and I was unable to activate it, but now works), and an axis which brings the other remote everyone is familiar with to select the icons on the tv screen. The other remote now has a small keyboard icon on the top right which didn't used to have before. I don't know what I did to activate it, however, it won't bring the keyboard automatically like before. Another way to bring the keyboard, if yours still stuck, is to highlight any of the letters in the menu, and swipe from right to left, the highlight will cursor will hide, swipe again and that brings up the keyboard. How? Why? Still a mystery to me, but I happy I can use remote again.

HOW can I enter text using Japanese character sets?

The "Text, Plates, Insets" section of the LOOKOUT(6.01) Help files states:
"Click the » button to the right of the Text field to expand the field for multiple line entries. You can enter text using international character sets such as Chinese, Korean, and Japanese."
Can someone please explain HOW to do this? Note, I have NO problem inputting Hirigana, Katakana, and Kanji into MS WORD; the keyboard emulates the Japanese layout and characters (Romaji is default) and the IME works fine converting Romaji, and I can also select charcters directly from the IME Pad. I have tried several different fonts with success and am currently using MS UI Gothic.ttf as default. Again, everything is normal and working in a predictable manner within Word.
I cannot get these texts into Lookout. I can't cut/paste from HTML pages or from text editors, even though both display properly. Within Lookout with JP selected as language/keyboard, when trying to type directly into the text field, the IME CORRECTLY displays Hirigana until <enter> is pressed, at which point all text reverts to question marks (?? ???? ? ?????). If I use the IME Pad, it does pretty much the same. I managed to get the "Yen" symbol to display, though, if that's relevant. As I said, font selected (in text/plate font options) is MS UI Gothic with Japanese as the selected script. Oddly enough, at this point the "sample" window is showing me the exact Hirigana character I want displayed in Lookout, but it won't. I've also tried staying in English and copying unicode characters from the Windows Character Map. Same results (Yen sign works, Hirigana WON'T).
Help me!
JW_Tech

JW_Tech,
Have you changed the regional setting to Japanese?
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me
Attachments:
language.JPG ‏50 KB

ALV report editable to enter text and print with including the text?

Hi all,
I have to display output of a report in ALV format and i have to make two fileds can be editable to enter texts by user and able to print the list with that texts .
Is it possible using standard Function modules or I have to go for OO methods? Please give the sample code ?
Thanks,
Vamshi
Edited by: VAMSHI KRISHNA on Oct 31, 2008 4:25 PM

Hi Vamshi,
Check out the Below sample code for the editable ALV.
*& Report Z7CC_OOPS_ALV_EDITABLE
report z7cc_oops_alv_editable.
tables sflight.
data: begin of gt_outtab occurs 0.     "with header line
        include structure sflight.
data: celltab type lvc_t_styl.
data: end of gt_outtab.
data: gt_fieldcat type lvc_t_fcat.
data: g_carrid like sflight-carrid,
      g_connid like sflight-connid.
data: gs_spfli type spfli.                                  "#EC NEEDED
data: g_custom_container type ref to cl_gui_custom_container.
data: g_container type scrfname value 'BCALV_GRID_DEMO_0100_CONT1'.
data: g_grid type ref to cl_gui_alv_grid.
data: wa_outtab like gt_outtab.
*       CLASS lcl_event_receiver DEFINITION
class lcl_event_receiver definition.
public section.
    types: begin of sflight_key.
    types:   carrid type s_carr_id.
    types:   connid type s_conn_id.
    types:   fldate type s_date.
    types: end of sflight_key.
    types: sflight_keys type standard table of sflight_key,
           sflight_table type standard table of sflight.
    methods:
      handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed.
    methods:
      get_inserted_rows
           exporting
              inserted_rows type sflight_keys.
    methods:
      get_deleted_rows
          exporting
              deleted_rows type sflight_table.
    methods:
       refresh_delta_tables.
    methods: set_table_is_initial.
    methods: set_table_is_not_initial.
    methods: table_is_initial
                returning value(initial) type char01.
private section.
* §4.Define internal tables to remember inserted and deleted lines,
*    thus the delta between input made after the last saving.
    data: inserted_rows type sflight_keys,
          deleted_rows type standard table of sflight.
* This flag is set if any error occured in one of the
* following methods:
    data: error_in_data type c.
* This flag signals that no records were read for the flight
* table initially:
    data: initial_table type c.
** Methods to modularize event handler method HANDLE_DATA_CHANGED:
    methods:
      check_double_entries
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      update_delta_tables
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      perform_semantic_checks
         importing
            pr_data_changed type ref to cl_alv_changed_data_protocol.
    methods:
      get_cell_values
           importing
             row_id          type int4
             pr_data_changed type ref to cl_alv_changed_data_protocol
           exporting
             key             type sflight_key.
endclass.                    "lcl_event_receiver DEFINITION
class lcl_event_receiver implementation.
method handle_data_changed.
*    data: ls_good type lvc_s_modi,
*          l_price type s_price,
*          ls_new type lvc_s_moce.
*    error_in_data = space.
** check if there exist double entries
*    call method check_double_entries( er_data_changed ).
** remember new or deleted lines for saving
*    call method update_delta_tables( er_data_changed ).
** check mt_good_cells semantically
*    call method perform_semantic_checks( er_data_changed ).
*    if error_in_data = 'X'.
*      call method er_data_changed->display_protocol.
*    endif.
endmethod.                    "handle_data_changed
method check_double_entries.
    data: lt_good_cells type lvc_t_modi,
          ls_good type lvc_s_modi,
          ls_key type sflight_key,
          ls_sflight type sflight,
          l_flightdate like gt_outtab-fldate,
          l_del_row type lvc_s_moce,
          ls_outtab like line of gt_outtab,
          l_reentered type c.
* §5.Check if there exist already other records with equal key fields.
* Check if the user has entered two new lines where the key fields
* are equal.
* Since CARRID and CONNID are read only, the check is restrained
* to field FLDATE.
* Algorithm: Copy all entries in MT_GOOD_CELLS to a dummy table.
*            During the copying procedure check if there exists
*            already a line with the same Flight date.
*    loop at pr_data_changed->mt_good_cells into ls_good.
*      case ls_good-fieldname.
*        when 'FLDATE'.
*          call method pr_data_changed->get_cell_value
*                      exporting
*                            i_row_id = ls_good-row_id
*                            i_fieldname = ls_good-fieldname
*                      importing e_value = l_flightdate.
*          read table lt_good_cells with key
*                            value = l_flightdate
*                            transporting no fields.
*          if sy-subrc = 0.
** There exists already a line with the same flight date!
*            call method pr_data_changed->add_protocol_entry
*                         exporting
*              i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*              i_msgv1 = text-m01
*              i_fieldname = ls_good-fieldname
*              i_row_id = ls_good-row_id.
*            error_in_data = 'X'.
*          else.
*            ls_good-value = l_flightdate.
*            append ls_good to lt_good_cells.
*          endif.
*      endcase.
*    endloop.
** Check if any new entries already exist in gt_outtab.
** At this point, lt_good_cells contains only lines with
** FIELDNAME = 'FLDATE'.
*    loop at lt_good_cells into ls_good.
*      l_flightdate = ls_good-value.      "flightdate, see above
*      read table gt_outtab with key
*                    carrid = g_carrid
*                    connid = g_connid
*                    fldate = l_flightdate
*                    transporting no fields.
*      if sy-subrc = 0.
** Check if this entry was deleted before, i.e. it is in the table
** of deleted rows. If so, the entry does not exist twice. The user
** has deleted a line and then reentered it.
*        l_reentered = space.
*        loop at pr_data_changed->mt_deleted_rows into l_del_row.
*          read table gt_outtab into ls_outtab index l_del_row-row_id.
*          if sy-subrc ne 0.
*            message i000(0k) with text-e01."Fehler beim Löschen
*          elseif
*                    ls_outtab-carrid eq g_carrid
*                and ls_outtab-connid eq g_connid
*                and ls_outtab-fldate eq ls_good-value.
*            l_reentered = 'X'.
*          endif.
*        endloop.
*        if l_reentered ne 'X'.
*          call method pr_data_changed->add_protocol_entry
*                         exporting
*              i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*              i_msgv1 = text-m01
*              i_fieldname = ls_good-fieldname
*              i_row_id = ls_good-row_id.
*          error_in_data = 'X'.
*        endif.
*      endif.
*    endloop.
** In this demo report you may prevent the selection
** of data by setting parameter 'p_ds'.
** If this is done, the next check is required:
*    if me->table_is_initial( ) eq 'X'.
*      call method get_cell_values
*           exporting row_id          = 1
*                     pr_data_changed = pr_data_changed
*           importing key             = ls_key.
*      select single * from sflight into ls_sflight
*                where carrid = ls_key-carrid
*                  and connid = ls_key-connid
*                  and fldate = ls_key-fldate.
*      if sy-subrc = 0.
*        call method pr_data_changed->add_protocol_entry
*                       exporting
*            i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*            i_msgv1 = text-m01
*            i_fieldname = 'FLDATE'
*            i_row_id = 1.
*        error_in_data = 'X'.
*      endif.
** flag initial_table is reset in method 'update_delta_tables'
*    endif.
endmethod.                    "check_double_entries
method update_delta_tables.
*    data: l_ins_row type lvc_s_moce,
*          l_del_row type lvc_s_moce,
*          ls_key type sflight_key,
*          ls_sflight type sflight,
*          ls_outtab like line of gt_outtab.
** §6.Use protocol attributes MT_DELETED_ROWS and MT_INSERTED_ROWS
**    to remember which lines where deleted or inserted. Save this
**    information in your internal tables.
** deleted rows
*    loop at pr_data_changed->mt_deleted_rows into l_del_row.
*      read table gt_outtab into ls_outtab index l_del_row-row_id.
*      if sy-subrc ne 0.
*        message i000(0k) with text-e01."Fehler beim Löschen
*      else.
*        move-corresponding ls_outtab to ls_sflight.
** It should no be possible that the same line is deleted twice,
** so we just add the new key line to 'deleted_rows'.
*        append ls_sflight to deleted_rows.
** If this line was inserted just before it is deleted:
*        delete me->inserted_rows
*             where carrid = ls_outtab-carrid
*             and   connid = ls_outtab-connid
*             and   fldate = ls_outtab-fldate.
*      endif.
*    endloop.
** inserted rows
** At this point ALV has not added new lines
** to gt_outtab, so you can not access their values
** by reading gt_outtab.
** Table MT_GOOD_CELLS holds new values that can be
** referenced using the ROW_ID.
*    if me->table_is_initial( ) eq 'X'.
** No flights were selected initially. This is the first new line.
*      call method get_cell_values
*            exporting row_id          = 1
*                      pr_data_changed = pr_data_changed
*            importing key             = ls_key.
*      append ls_key to inserted_rows.
*      call method me->set_table_is_not_initial.
*    endif.
*    loop at pr_data_changed->mt_inserted_rows into l_ins_row.
*      call method get_cell_values
*              exporting row_id          = l_ins_row-row_id
*                        pr_data_changed = pr_data_changed
*              importing key             = ls_key.
**      READ TABLE gt_outtab INTO ls_outtab INDEX l_ins_row-row_id.
** Just insert the new row regardless if the input is wrong
*      append ls_key to inserted_rows.
*    endloop.
endmethod.                    "update_delta_tables
method get_cell_values.
* get values of key cells of row ROW_ID
** CARRIER
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'CARRID'
*               importing
*                 e_value = key-carrid.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
** CONNID
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'CONNID'
*               importing
*                 e_value = key-connid.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
** FLDATE
*    call method pr_data_changed->get_cell_value
*          exporting
*                 i_row_id    = row_id
*                 i_fieldname = 'FLDATE'
*               importing
*                 e_value = key-fldate.
*    if sy-subrc ne 0.
*      message i000(0k) with text-e02. "Fehler beim Einfügen
*    endif.
endmethod.                    "get_cell_values
method perform_semantic_checks.
*    data: ls_good type lvc_s_modi,
*          l_planetype type s_planetye,
*          l_seatsmax type s_seatsmax.
*    loop at pr_data_changed->mt_good_cells into ls_good.
*      case ls_good-fieldname.
*        when 'PLANETYPE'.
*          call method pr_data_changed->get_cell_value
*             exporting
*               i_row_id = ls_good-row_id
*               i_fieldname = ls_good-fieldname
*             importing
*               e_value = l_planetype.
*          select single seatsmax from saplane into l_seatsmax
*                        where planetype = l_planetype.
*          if sy-subrc ne 0.
*            call method pr_data_changed->add_protocol_entry
*                            exporting
*                 i_msgid = '0K' i_msgno = '000' i_msgty = 'E'
*                 i_msgv1 = text-m02
*                 i_fieldname = ls_good-fieldname
*                 i_row_id = ls_good-row_id.
*            error_in_data = 'X'.
*          else.
*            call method pr_data_changed->modify_cell
*              exporting i_row_id    = ls_good-row_id
*                        i_fieldname = 'SEATSMAX'
*                        i_value     = l_seatsmax.
*          endif.
*      endcase.
*    endloop.
endmethod.                    "perform_semantic_checks
method get_inserted_rows.
*    inserted_rows = me->inserted_rows.
endmethod.                    "get_inserted_rows
method get_deleted_rows.
*    deleted_rows = me->deleted_rows.
endmethod.                    "get_deleted_rows
method refresh_delta_tables.
*    clear me->inserted_rows[].
*    clear me->deleted_rows[].
endmethod.                    "refresh_delta_tables
method set_table_is_initial.
*    initial_table = 'X'.
endmethod.                    "set_table_is_initial
method set_table_is_not_initial.
*    initial_table = space.
endmethod.                    "set_table_is_not_initial
method table_is_initial.
*    if initial_table = 'X'.
*      initial = 'X'.
*    else.
*      initial = space.
*    endif.
endmethod.                    "table_is_initial
endclass.                    "lcl_event_receiver IMPLEMENTATION
data: g_verifier type ref to lcl_event_receiver.
data: g_max type i value 100.
data: gs_layout type lvc_s_layo.
data: ok_code like sy-ucomm,
      save_ok like sy-ucomm.
parameters: p_ds type c as checkbox.   "delete selection
select-options s_carrid for sflight-carrid
                            no intervals no-extension default 'LH'.
select-options s_connid for sflight-connid
                           no intervals no-extension default '0400'.
start-of-selection.
g_carrid = s_carrid-low.
g_connid = s_connid-low.
* first check airline and connection
select single * from spfli into gs_spfli
                     where carrid = g_carrid
                     and connid = g_connid.
call screen 100.
*&      Module STATUS_0100 OUTPUT
*       text
module status_0100 output.
set pf-status 'MAIN100'.
set titlebar 'MAIN100'.
if g_custom_container is initial.
    perform create_and_init_alv changing gt_outtab[]
                                         gt_fieldcat.
endif.
endmodule.                 " STATUS_0100 OUTPUT
*&      Form create_and_init_alv
*       text
*      <--P_GT_OUTTAB[] text
*      <--P_GT_FIELDCAT text
form create_and_init_alv changing pt_outtab like gt_outtab[]
                                  pt_fieldcat type lvc_t_fcat.
data: lt_exclude type ui_functions.
create object g_custom_container
         exporting container_name = g_container.
create object g_grid
         exporting i_parent = g_custom_container.
* Create Objekt to verify input values.
* (This object is already needed in form SELECT_DATA).
create object g_verifier.
* SET HANDLER g_verifier->handle_data_changed FOR g_grid.
perform select_data changing pt_outtab[].
perform build_fieldcat changing pt_fieldcat.
perform exclude_tb_functions changing lt_exclude.
gs_layout-stylefname = 'CELLTAB'.
call method g_grid->set_table_for_first_display
    exporting
      it_toolbar_excluding = lt_exclude
      is_layout            = gs_layout
    changing
      it_fieldcatalog      = pt_fieldcat
      it_outtab            = pt_outtab[].
* Set editable cells to ready for input initially
call method g_grid->set_ready_for_input
    exporting
      i_ready_for_input = 1.
endform.                    " create_and_init_alv
*&      Form select_data
*       text
*      <--P_GT_OUTTAB text
form select_data changing pt_outtab like gt_outtab[].
data: lt_sflight type table of sflight,
        ls_sflight type sflight,
        ls_outtab like line of gt_outtab,
        l_index type i,
        ls_spfli type spfli,                                "#EC NEEDED
        lt_celltab type lvc_t_styl.
* Check parameter 'p_ds'=>optionally select no data
if p_ds is initial.
* Select data from sflight
    select * from sflight into table lt_sflight up to g_max rows
                     where carrid = g_carrid
                       and connid = g_connid.
endif.
if sy-subrc ne 0 or not p_ds is initial.
* no flights were found!
* We provide some default values for the first line that is entered:
    ls_outtab-carrid = g_carrid.
    ls_outtab-connid = g_connid.
    case g_carrid.
      when 'LH'.
        ls_outtab-currency = 'DEM'.
      when others.
        ls_outtab-currency = 'US'.
    endcase.
    ls_outtab-seatsocc = 0.
    ls_outtab-paymentsum = 0.
* set fields FLDATE, PRICE and PLANETYPE to editable
    perform fill_celltab using 'RW'
                         changing lt_celltab.
    insert lines of lt_celltab into table ls_outtab-celltab.
    append ls_outtab to pt_outtab.
* Tell Verify-Objekt that the table was initial
    call method g_verifier->set_table_is_initial.
else.
    call method g_verifier->set_table_is_not_initial.
* move corresponding fields from lt_sflight to gt_outtab
    loop at lt_sflight into ls_sflight.
      move-corresponding ls_sflight to ls_outtab.
      append ls_outtab to pt_outtab.
    endloop.
* §3.Set all cells of the table non-editable by using the style table.
    loop at pt_outtab into ls_outtab.
      l_index = sy-tabix.
      refresh lt_celltab.
      perform fill_celltab using 'RO'
                        changing lt_celltab.
* Copy your celltab to the celltab of the current row of gt_outtab.
      insert lines of lt_celltab into table ls_outtab-celltab.
      modify pt_outtab from ls_outtab index l_index.
    endloop.
endif.
endform.                               " select_data
*&      Form fill_celltab
*       text
*      -->VALUE(P_MODE) text
*      -->PT_CELLTAB     text
form fill_celltab using value(p_mode)
                  changing pt_celltab type lvc_t_styl.
data: ls_celltab type lvc_s_styl,
        l_mode type raw4.
* This forms sets the style of columns 'PRICE', FLDATE and PLANETYPE
* editable
if p_mode eq 'RW'.
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
else.                                "p_mode eq 'RO'
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_celltab-fieldname = 'FLDATE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PRICE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
ls_celltab-fieldname = 'PLANETYPE'.
ls_celltab-style = l_mode.
insert ls_celltab into table pt_celltab.
endform.                               " FILL_CELLTAB
*&      Form BUILD_FIELDCAT
*       text
*      <--P_GT_FIELDCAT text
form build_fieldcat changing pt_fieldcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
call function 'LVC_FIELDCATALOG_MERGE'
    exporting
      i_structure_name = 'SFLIGHT'
    changing
      ct_fieldcat      = pt_fieldcat.
loop at pt_fieldcat into ls_fcat.
    if    ls_fcat-fieldname eq 'PRICE'
       or ls_fcat-fieldname eq 'PLANETYPE'
       or ls_fcat-fieldname eq 'FLDATE'.
* §1.Set status of columns FLDATA, PRICE and PLANETYPE to editable.
*    Since all cells are set to non-editable (see step 3) the cells
*    of this columns will only be editable for new lines.
      ls_fcat-edit = 'X'.
* Field 'checktable' is set to avoid shortdumps that are caused
* by inconsistend data in check tables. You may comment this out
* when the test data of the flight model is consistent in your system.
      ls_fcat-checktable = '!'.        "do not check foreign keys
      modify pt_fieldcat from ls_fcat.
    elseif ls_fcat-fieldname = 'CARRID'
       or ls_fcat-fieldname = 'CONNID'
       or ls_fcat-fieldname = 'CURRENCY'.
* §2.Use field AUTO_VALUE of the fieldcatalog to preset values when new
*    lines are added.
      ls_fcat-auto_value = 'X'.
      ls_fcat-checktable = '!'.   "do not check foreign key relations
      modify pt_fieldcat from ls_fcat.
    endif.
endloop.
endform.                    "build_fieldcat
*&      Form exclude_tb_functions
*       text
*      <--P_LT_EXCLUDE text
form exclude_tb_functions changing pt_exclude type ui_functions.
data ls_exclude type ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
append ls_exclude to pt_exclude.
endform.                               " EXCLUDE_TB_FUNCTIONS
*&      Module USER_COMMAND_0100 INPUT
*       text
module user_command_0100 input.
save_ok = sy-ucomm.
clear ok_code.
case save_ok.
    when 'SAVE'.
*      perform save_data.
    when 'BACK'.
* §10.Unlock your database table.
*      perform unlock_sflight.
      leave to screen 0.
    when 'EXIT'.
      perform exit_program.
    when 'ADD'.
      perform add_line_item.
    when others.
*     do nothing
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
*       FORM EXIT_PROGRAM                                             *
form exit_program.
leave program.
endform.                    "exit_program
*&      Form ADD_LINE_ITEM
*       text
* --> p1        text
* <-- p2        text
form add_line_item .
data: lt_rows type lvc_t_row.
data: wa_rows type lvc_t_row with header line.
data: tabix type sy-tabix.
*&Find the row ( index ) number
call method g_grid->get_selected_rows
          importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
read table lt_rows into wa_rows index 1.
tabix = wa_rows-index .
insert gt_outtab index tabix.
*REFRESH_TABLE_DISPLAY
call method g_grid->refresh_table_display
* EXPORTING
*    IS_STABLE      =
*    I_SOFT_REFRESH =
* EXCEPTIONS
*    FINISHED       = 1
*    others         = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " ADD_LINE_ITEM
Thanks,
Chidanand

Can you enter text into "info" pop-up window for TV Shows?

It's not a big deal, but I was just wondering if there is a way (a script perhaps) of entering text into the little "info" pop-up window for TV Shows in iTunes? (You know the one...it pops-up when you click on the little "i" in the description box on the TV Shows main playlist)
The show files I made myself have blank info windows of course and it would be nice to be able to enter a decent length description of the episode (the character limit in the "Description" box is so short).
Like I said, it's not a big deal, but it would be nice to be able to enter info in there...so if anybody knows how...please let me know.
Yhanx a lot!

Thank you very much for your reply! I will definitely pass this along to the IT department! Smiling now!

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Calendar on iOS 7. Anyone noticed that when you enter text into the "notes section" of a day, the text disappears behind the keyboard rather than scrolling down to keep pace with text entry ? Looks like an 7 glitch to me ?

Doesn't do that for me. Try resetting the phone

I am trying to use pages. When I open a blank document and enter text, nothing appears on the document. What is the problem?

I am trying to use pages. When I open a document and begin entering text, nothing shows up on the document. I cannot see what I am typing. What is the problem and what am I doing wrong.

Thanks Jerrold. But I am opening a word processing document. The same thing happens when I select a blank layout page. I try to put in shapes and nothing appears. When I click around on the blank word processing document the verbage will appear in a green color but when I type, I still cannot see what I am typing. I have tried to uninstall and reinstall and this did not help.
Thanks Again

Entering text in safari

Similar Messages

Maybe you are looking for