Entering values in MARA table using module pool programming
Hi All,
I need a help from you all. I want to enter the values in the MARA table using module pool programming.
Can you please give me the detailed approach and if possible then code also as i am new to ABAP.
Thanks in Advance
Create the screen fields with ref to field in MARA table, once data is entered on screen by user then fill appropriate structure of FM BAPI_MATERIAL_SAVEDATA. If call to Fm BAPI_MATERIAL_SAVEDATA is successful then call FM BAPI_TRANSACTION_COMMIT to make changes permanent in database .
Similar Messages
-
How to update field values in a database table using module pool prg?
hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidyaHI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
v_kun_high like ZCUST_CALL_REC-kunnr,
v_bud_low like ZCUST_CALL_REC-budat,
v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of itab.
*data:begin of Jtab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
perform update on commit.
WHEN 'DELETE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'UPDATE'.
perform move_data.
UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
ENDIF.
WHEN 'DELETE'.
perform move_data.
DELETE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
text
module update_table output.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
table itab
WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_high
IMPORTING
OUTPUT = r_kunnr-high.
r_kunnr-option = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
CALL SCREEN '9000'.
ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'BT'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-HIGH = v_bud_HIGH.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
CALL SCREEN '9000'.
r_budat-low = ''.
r_budat-option = ''.
r_budat-sign = ''.
ENDIF.
ENDIF.
ENDFORM.
*& Form update
text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
text
--> p1 text
<-- p2 text
form move_data .
clear itab.
refresh itab.
move-corresponding zcust_call_rec to itab.
MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
APPEND ITAB.
delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya -
Checking Records in multiple screens using module pool programming
Hi,
I created student registration form using module pool programming.In first SCREEN i designed like the Below.
Name: <INPUT/OUTPUT Field>
Emailid: <INPUT/OUTPUT Field>
Password:<INPUT/OUTPUT Field>
CREATE<Push Button> SIGNIN<Push Button> cancel<Push Button>
in screen 1000 I created like the above screen and i wrote the code for it.It's successfully inserted records in ZSTUDENT database.
BUT
when i call the second screen 2000.I design the screen like below.And database table is ZSTU_LOGIN.
username : <INPUT/OUTPUT Field>
password : <INPUT/OUTPUT Field>
LOGIN<push Button> EXIT<Push Button>
AND i created Third screen 3000.Like full of detail of student details like First Name,Last Name,DOB,Education Details,Contact Details etc...
BUT I'm facing the pbm is
whatever the record is stored in table ZSTUDENT-Name & password when i call the screen 2000 that USERNAME & PASSWORD are same
Then go to THIRD screen 3000.BUT i wrote the code for second screen 2000 by using SELECT statement.without my code check it will go to third
screen 3000 By the Statement of Call screen 3000.
PLZ any one help me HOW to CHECK the Exact Record From second Screen 2000 to First Screen 1000.
HOW to Check the code AND can u provide me any code available.
thanks,
AnushaHi vikram,
I wrote the code for screen 2000 like below.
MODULE STATUS_2000 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
TABLES : ZSTUDENT_ENTER.
TYPES: BEGIN OF ST_TAB1,
USERNAME TYPE ZSTUDENT_ENTER-USERNAME,
PASSWORD1 TYPE ZSTUDENT_ENTER-PASSWORD1,
END OF ST_TAB1.
DATA : W_TAB1 TYPE ZSTUDENT_ENTER.
DATA : IT_TAB1 TYPE STANDARD TABLE OF ZSTUDENT_ENTER.
DATA : USERNAME TYPE CHAR50,
PASSWORD1 TYPE CHAR25.
ENDMODULE. " STATUS_2000 OUTPUT
*& Module USER_COMMAND_2000 INPUT
* text
MODULE USER_COMMAND_2000 INPUT.
CLEAR W_TAB1.
MOVE-CORRESPONDING W_TAB TO W_TAB1.
IF SY-SUBRC EQ 0.
SELECT SINGLE MAILID PASSWORD
INTO CORRESPONDING FIELDS OF W_TAB
FROM ZSTUDENT_INFO
WHERE USERNAME = W_TAB-MAILID AND
PASSWORD1 = W_TAB-PASSWORD.
CALL SCREEN 2000.
ENDSELECT.
ELSEIF SY-SUBRC NE 0.
MESSAGE 'INVALID USERNAME/PASSWORD'.
ELSEIF SY-UCOMM = 'LOGIN'.
CALL SCREEN 3000.
ENDIF.
ENDMODULE. " USER_COMMAND_2000 INPUT
But i could not found whether code is write or not.
syntax error is USERNAME is Unknown.
could solve me my pbm anybody.....
Thanks,
Anusha -
Table maintenance by using module pool program
Hi
Please give me step by step procedure to generate table maintenance by using module pool programWhile creating table maintenance, you can go thro' the module pool program used for that.In that,in PBO part,just try making particular field active = 1 inside loop at screen.
Girish Kumar Lo...
Posts: 1,518
Questions: 2
Registered: 4/19/07
Forum points: 1,982
Re: Regarding Table maintanence generator
Posted: Jun 26, 2007 9:02 AM in response to: Younus Khan Reply E-mail this post
here is the code for that
REPORT ZTAB_MAINT
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
T Y P E D E C L A R A T I O N S
*--Types declaration for selection to be passed as parameter into
*--VIEW_MAINTENANCE_CALL FM
TYPES: BEGIN OF TP_RANGETAB.
INCLUDE STRUCTURE VIMSELLIST.
TYPES: END OF TP_RANGETAB.
D A T A D E C L A R A T I O N S
DATA: V_MATNR TYPE MATNR, " Material Number
V_WERKS TYPE WERKS_D, " Plant
V_KONOB TYPE KONOB, " Product allocation object
V_ZCPLT(40) TYPE C. " Message
I N T E R N A L T A B L E D E C L A R A T I O N S
Internal table to subroutine code
*Internal table used as selection for VIEW_MAINTENANCE_CALL FM
DATA: IT_RANGETAB TYPE STANDARD TABLE OF TP_RANGETAB WITH HEADER LINE.
*--Internal table used for getting the tablefields
DATA: BEGIN OF IT_HEADER OCCURS 1.
INCLUDE STRUCTURE VIMDESC.
DATA: END OF IT_HEADER.
*--Name Tabel
DATA: BEGIN OF IT_NAMTAB OCCURS 50.
INCLUDE STRUCTURE VIMNAMTAB.
DATA: END OF IT_NAMTAB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_MATNR OCCURS 0,
MATNR TYPE MATNR,
END OF IT_MATNR.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_WERKS OCCURS 0,
WERKS TYPE WERKS,
END OF IT_WERKS.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_KONOB OCCURS 0,
KONOB TYPE KONOB,
END OF IT_KONOB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_ZCPLT OCCURS 0,
ZCPLT(40) TYPE C,
END OF IT_ZCPLT.
I N P U T S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK SELSCR WITH FRAME TITLE TEXT-001.
RANGES: R_MATNR FOR V_MATNR.
RANGES: R_WERKS FOR V_WERKS.
RANGES: R_KONOB FOR V_KONOB.
RANGES: R_ZCPLT FOR V_ZCPLT.
Select Options
SELECT-OPTIONS: S_MATNR FOR V_MATNR NO-EXTENSION, " Material
S_WERKS FOR V_WERKS NO-EXTENSION, " Plant
S_KONOB FOR V_KONOB NO-EXTENSION,
" Product allocation object
S_ZCPLT FOR V_ZCPLT NO-EXTENSION. " Plant
SELECTION-SCREEN END OF BLOCK SELSCR.
A T S E L E C T I O N S C R E E N
AT SELECTION-SCREEN.
Validate user inputs
PERFORM FRM_VALIDATIONS.
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
Fetch Data from Data Base
PERFORM FRM_GET_DATA.
S U B R O U T I N E S
*& Form frm_get_data
Call the function module VIEW_MAINTENNACE_CALL to get data
based on selection criteria
FORM FRM_GET_DATA .
CALL FUNCTION 'VIEW_GET_DDIC_INFO'
EXPORTING
VIEWNAME = 'ZTAB'
TABLES
X_HEADER = IT_HEADER
X_NAMTAB = IT_NAMTAB
SELLIST = IT_RANGETAB
EXCEPTIONS
NO_TVDIR_ENTRY = 1
TABLE_NOT_FOUND = 2.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Error in ZTAB table'(005).
ENDIF.
CLEAR: IT_RANGETAB,
IT_RANGETAB[].
LOOP AT IT_NAMTAB.
CASE IT_NAMTAB-VIEWFIELD.
WHEN 'MATNR'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'MATNR'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_MATNR.
CASE S_MATNR-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_MATNR-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_MATNR,
R_MATNR[].
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'BT'.
R_MATNR-LOW = S_MATNR-LOW.
R_MATNR-HIGH = S_MATNR-HIGH.
APPEND R_MATNR.
SELECT MATNR
INTO TABLE IT_MATNR
FROM ZTAB
WHERE MATNR IN R_MATNR.
DELETE ADJACENT DUPLICATES FROM IT_MATNR COMPARING MATNR
LOOP AT IT_MATNR.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_MATNR-MATNR.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_MATNR-OPTION.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'WERKS'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'WERKS'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_WERKS.
CASE S_WERKS-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_WERKS-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_WERKS,
R_WERKS[].
R_WERKS-SIGN = 'I'.
R_WERKS-OPTION = 'BT'.
R_WERKS-LOW = S_WERKS-LOW.
R_WERKS-HIGH = S_WERKS-HIGH.
APPEND R_WERKS.
SELECT WERKS
INTO TABLE IT_WERKS
FROM MARC
WHERE WERKS IN R_WERKS.
DELETE ADJACENT DUPLICATES FROM IT_WERKS COMPARING WERKS
LOOP AT IT_WERKS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_WERKS-WERKS.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_WERKS-OPTION.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'KONOB'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'KONOB'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_KONOB.
CASE S_KONOB-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_KONOB-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_KONOB,
R_KONOB[].
R_KONOB-SIGN = 'I'.
R_KONOB-OPTION = 'BT'.
R_KONOB-LOW = S_KONOB-LOW.
R_KONOB-HIGH = S_KONOB-HIGH.
APPEND R_KONOB.
SELECT KONOB
INTO TABLE IT_KONOB
FROM T190
WHERE KONOB IN R_KONOB.
DELETE ADJACENT DUPLICATES FROM IT_KONOB COMPARING KONOB
LOOP AT IT_KONOB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_KONOB-KONOB.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_KONOB-OPTION.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'ZCPLT'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'ZCPLT'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_ZCPLT.
CASE S_ZCPLT-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_ZCPLT-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_ZCPLT,
R_ZCPLT[].
R_ZCPLT-SIGN = 'I'.
R_ZCPLT-OPTION = 'BT'.
R_ZCPLT-LOW = S_ZCPLT-LOW.
R_ZCPLT-HIGH = S_ZCPLT-HIGH.
APPEND R_ZCPLT.
SELECT ZCPLT
INTO TABLE IT_ZCPLT
FROM ZTAB
WHERE ZCPLT IN R_ZCPLT.
DELETE ADJACENT DUPLICATES FROM IT_ZCPLT COMPARING ZCPLT
LOOP AT IT_ZCPLT.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_ZCPLT-ZCPLT.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_ZCPLT-OPTION.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
ENDCASE.
ENDLOOP.
IF S_ZCPLT[] IS INITIAL.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'U'
VIEW_NAME = 'ZTAB'
TABLES
DBA_SELLIST = IT_RANGETAB
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
MAINTENANCE_PROHIBITED = 14
OTHERS = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'U'
VIEW_NAME = 'ZTAB_ZTEST'
TABLES
DBA_SELLIST = IT_RANGETAB
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
MAINTENANCE_PROHIBITED = 14
OTHERS = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " frm_get_data
*& Form frm_validations
Validating field values
FORM FRM_VALIDATIONS .
Material number should not be validated (10/17/2005)
CLEAR V_MATNR.
SELECT SINGLE MATNR
INTO V_MATNR
FROM MARA
WHERE MATNR IN S_MATNR.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Material not found'.
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
INTO V_WERKS
FROM ZTAB
WHERE WERKS IN S_WERKS.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Plant (WERKS) not found'(002).
ENDIF.
CLEAR V_KONOB.
SELECT SINGLE KONOB
INTO V_KONOB
FROM ZTAB
WHERE KONOB IN S_KONOB.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH ' Product allocation object not found'(003).
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
INTO V_WERKS
FROM ZTAB
WHERE WERKS IN S_ZCPLT.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Plant (ZCPLT) not found'(004).
ENDIF.
ENDFORM. " frm_validations
reward points if it is usefull ...
Regarding Table maintanence generator -
How to use module pool program in my custom report?
Hi,
I am developing a custom report in abap. I want to fetch data from a standard module pool program.I want output of this standard module pool program to be used in my standad report.Submit cannot be used with module pool programs. How can i do this?Can u please suggest?HI friend,
For this you can directly use the table fields i.e. each and every module pool screen fields will be having the table name along with its fields (which you can see by double clicking the field and selecting technical settings button) and since it is a standard module pool program that will get populated directly. So you can get the screen field values directly from the table. I think this will help. Please try and let us know wheather it is solved.
Thanks and regards,
Sri Hari Anand Kumar
Edited by: srihari.kumar on Apr 6, 2011 3:31 PM -
How to insert data into a Ztable by using module pool programming??
Hi,
I am new to ABAP, Actually I have made a Ztable now I want to insert data by using the module pool programming. In which there are all field in the first screen and there is a save button. So when ever i press SAVE button it shud update the Ztable with new entries.But actually I am not getting How can i update that??can you please send me the code for inserting data.
Thanks in Advance.
Edited by: Swapna Ram on Feb 17, 2008 12:01 AMSwapna,
Check this thread...
Custom Table updation thru table control
ALso check this..
Dialog programming -
How to create selections-screens to display PO using module pool program
All,
I'm new to module pool programming. Can any one please provide me where to create selections screens to display existing purchase orders using the below selection criteria in thr module pool program.,
SELECT-OPTIONS : S_LIFNR FOR EKKO-LIFNR,
S_BSART FOR EKKO-BSART,
S_BUKRS FOR EKKO-BUKRS,
S_WERKS FOR EKPO-WERKS OBLIGATORY,
S_BEDAT FOR SY-DATUM,
S_EINDT FOR EKET-EINDT,
S_EBELN FOR EKKO-EBELN,
S_MATNR FOR EKPO-MATNR.
provide me step by step to do this.Hi,
Thanks for the reply can you please let me know.
How can I create the ranges
like low and high in the selection.
Using se51 i was able to do only one i,e
example I need
purchase order number----
f4 -
f4
Can please tell me how to do this -
Help in uploading image using module pool programming!!!
hi all
I need a help from you all...iam designing my company's Visitors Identity card...im workin in module pool programming,i need to know wat function module should i use to get jpg image n to display it...
i hav tried it using DP_PUBLISH_WWW_URL func module but it asks for OBJID dono wat should i give...i referred SAP_PICTURE_DEMO.....
<b>plz suggest me with some solutions to diplay image which is stored in desktop....</b>
asha.......hi,
u try this importing jpeg image in transcation oaor .
in that give class name as pictures and class type as ot and execute it.
in that u import which image u want to say for suppose a DUMMY.
FORM TOP_OF_PAGE. "#EC CALLED
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
<b>I_LOGO = 'DUMMY'</b>
"'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "TOP_OF_PAGE
this top of page u use in FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = gc_pf_status_set
I_CALLBACK_USER_COMMAND = GC_USER_COMMAND
<b> I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'</b>
this may solve ur problem. -
*How can we use the internal table in module pool programming? Clarify plz*
If we creating a screen using the table having four fields(for e.g.). The screen has the functions of display, modify, delete, save, exit etc for the fields. The front-end of the screen having I/O fields of the table using internal table. How can we declare the internal table in the screen?
HI,
Create one WA for your Internal table and then map it to your fields.
For Example,
Data : begin of wa,
name(10),
age type i,
end of wa.
data : it like table of wa with header line.
Then in screen create input fields with the name, age and ***.
Then the user entered values are stored in name age and ***.
then you can manipulate with that values using wa.
Thanks. -
Reg alv grid using module pool programming
Dear Friends,
I have a situation where i am using alv grid in module programming where in when i click the total button in the tool bar for any numeric column, the screen goes for a run time error.
I have giving all conditions such as made the column in the field structure of lvc_field_catalog as do_sum = 'X',
still goes for a dump...can anyone throw some hints to do more or the reason behind this and also have not excluded the function code for this total pushbutton while passing to the method set_table_for_first_display
thanks...hi,
check this up
internal tables
DATA: i_tab TYPE TABLE OF zchangereq,
w_tab TYPE zchangereq.
display field details
DATA: w_field_cat_wa TYPE lvc_s_fcat. " Field Catalog work area
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-020.
PARAMETERS: p_outs RADIOBUTTON GROUP g1,
p_comp RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
*MACROS
DEFINE add_field.
&1 = FIELDNAME &2 = HEADING &3 = Key field flag
clear w_field_cat_wa.
w_field_cat_wa-fieldname = &1.
lw_field_cat_wa-ref_table = p_ref_table.
lw_field_cat_wa-inttype = p_inttype.
lw_field_cat_wa-decimals = p_decimals.
lw_field_cat_wa-coltext = p_coltext.
lw_field_cat_wa-seltext = p_seltext.
lw_field_cat_wa-do_sum = p_do_sum.
lw_field_cat_wa-no_out = p_no_out.
lw_field_cat_wa-col_pos = p_col_pos.
lw_field_cat_wa-reptext = p_coltext.
lw_field_cat_wa-colddictxt = p_colddictxt.
w_field_cat_wa-scrtext_m = &2.
w_field_cat_wa-key = &3.
append w_field_cat_wa to i_field_cat.
END-OF-DEFINITION.
ALV specific Declarations...........................................
ALV specific Internal table declarations.............................
DATA: i_field_cat TYPE lvc_t_fcat, " Field catalogue
i_alv_sort TYPE lvc_t_sort. " Sort table
ALV variables........................................................
DATA: w_alv_layout TYPE lvc_s_layo, " ALV Layout
w_alv_save TYPE c, " ALV save
w_alv_variant TYPE disvariant. " ALV Variant
ALV Class definitions................................................
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS: handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
METHODS: handle_hotspot
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id.
ENDCLASS. " CLASS LCL_EVENT_HANDLER DEF..
ALV Class implementation............................................
In the Event of a Double Click drill down to the corresponding CHANGE REQUEST
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
DATA: l_tab LIKE LINE OF i_tab.
CHECK e_row-rowtype(1) EQ space.
READ TABLE i_tab INDEX e_row-index INTO l_tab.
SET PARAMETER ID 'ZTY' FIELD l_tab-ztype.
SET PARAMETER ID 'ZCR' FIELD l_tab-zcref.
CALL TRANSACTION 'ZCRT' AND SKIP FIRST SCREEN.
ENDMETHOD. " HANDLE_DOUBLE_CLICK
not working yet - hotspot seems to stay in the gui!!
METHOD handle_hotspot.
DATA: l_tab LIKE LINE OF i_tab.
CHECK e_row_id-rowtype(1) EQ space.
READ TABLE i_tab INDEX e_row_id-index INTO l_tab.
SET PARAMETER ID 'ZTY' FIELD l_tab-ztype.
SET PARAMETER ID 'ZCR' FIELD l_tab-zcref.
CALL TRANSACTION 'ZCRT' AND SKIP FIRST SCREEN.
ENDMETHOD. " HANDLE_DOUBLE_CLICK
ENDCLASS. " CLASS LCL_EVENT_HANDLER IMPL...
ALV Grid Control definitions........................................
DATA:
ALV Grid Control itself
o_grid TYPE REF TO cl_gui_alv_grid,
Container to hold the ALV Grid Control
o_custom_container TYPE REF TO cl_gui_custom_container,
Event handler (defined in the class above)
o_event_handler TYPE REF TO lcl_event_handler.
INITIALIZATION.
PERFORM create_field_catalogue. " Create ALV Field Catalog
START-OF-SELECTION.
Outstanding requests
IF p_outs = 'X'.
SELECT * FROM zchangereq
INTO TABLE i_tab
WHERE zstatus < 99.
ELSE.
completed requests
SELECT * FROM zchangereq
INTO TABLE i_tab
WHERE zstatus = 99.
ENDIF.
END-OF-SELECTION.
PERFORM list_output_to_alv. " Perform ALV Output operations
FORM LIST_OUTPUT_TO_ALV *
This subroutine is used to call the screen for ALV Output. *
There are no interface parameters to be passed to this subroutine. *
FORM list_output_to_alv.
CALL SCREEN 100.
ENDFORM. " LIST_OUTPUT_TO_ALV
Module STATUS_0100 OUTPUT *
This is the PBO module which will be processed befor displaying the *
ALV Output. *
MODULE status_0100 OUTPUT.
SET PF-STATUS '0100'. " PF Status for ALV Output Screen
IF p_outs = 'X'.
SET TITLEBAR 'STD'.
ELSE.
completed requests
SET TITLEBAR 'COMP'.
ENDIF.
CREATE OBJECT: o_custom_container
EXPORTING container_name = 'SC_GRID',
o_grid
EXPORTING i_parent = o_custom_container.
PERFORM define_alv_layout. " ALV Layout options definitions
PERFORM save_alv_layout_options. " save ALV layout options
PERFORM call_alv_grid. " Call ALV Grid Control
ENDMODULE. " STATUS_0100 OUTPUT
Module USER_COMMAND_0100 INPUT *
This is the PAI module which will be processed when the user performs*
any operation from the ALV output. *
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'EXIT' OR 'BACK' OR 'CANC'.
may need to do this so display is refreshed if other report selected
CALL METHOD o_custom_container->free.
SET SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
FORM DEFINE_ALV_LAYOUT *
This subroutine is used to Define the ALV layout. *
FORM define_alv_layout .
w_alv_layout-numc_total = 'X'. " Numc total line
w_alv_layout-cwidth_opt = 'X'. " Optimal column width
w_alv_layout-detailinit = 'X'. " Show values that are initial in
" detail list.
w_alv_layout-sel_mode = 'A'. " Column selection mode
w_alv_layout-no_merging = 'X'. " No merging while sorting columns
w_alv_layout-keyhot = 'X'.
ENDFORM. " DEFINE_ALV_LAYOUT
FORM SAVE_ALV_LAYOUT_OPTIONS *
This subroutine is used to Save the ALV layout options. *
FORM save_alv_layout_options.
See the ALV grid control documentation for full list of options
w_alv_save = 'A'.
w_alv_variant-report = sy-repid.
ENDFORM. " SAVE_ALV_LAYOUT_OPTIONS
FORM CALL_ALV_GRID *
This subroutine is used to call ALV Grid control for processing. *
FORM call_alv_grid.
CALL METHOD o_grid->set_table_for_first_display
EXPORTING
is_layout = w_alv_layout
i_save = w_alv_save
is_variant = w_alv_variant
CHANGING
it_outtab = i_tab[]
it_sort = i_alv_sort
it_fieldcatalog = i_field_cat.
Link used Events and Event Handler Methods
CREATE OBJECT o_event_handler.
Set handler o_event_handler->handle_top_of_page for o_grid.
SET HANDLER o_event_handler->handle_double_click FOR o_grid.
ENDFORM. " CALL_ALV_GRID
*& Form create_field_catalogue
set up field catalogue
FORM create_field_catalogue .
Fieldname Heading Key?
*eg add_field 'ZTYPE' 'Type' 'X'.
ENDFORM. " create_field_catalogue -
How to create dynamic screen using module pool programming
Hi,
Could anybody help me how to create dynamic screens?
I am developing a screen with HR Person with assignment info. If PERNR have multiple assignments, i need to show all the details one by one. How to show the details on screen. I need to call one by one assignment information dynamically.
Please suggest me how to do, apart from using table controls.
Thanks,
KamalYou may have the below options:
1) Table Control
2) Individual fields
3) ALV
4) pop-up screen -
System generated value for a field and incrementing (using module pool pro)
Hi,
I'm getting system generated value for a field and incrementing (i.e done by coding) when i'm saving the screen or transaction (which is created using module pool programming) while modifying, saving its working fine, but when i'm going out of the screen or exit n again i start the screen (with some ztransco) the value for the field again starting from 0 so i want to start from the same value for a field where we exit or got out from the screen n incremented respectively while saving the screen,
Thanks & Regards,
MS
Edited by: Rob Burbank on May 4, 2010 10:40 AMSearch the forum for number range objects.
Rob -
Saving Ztable using Module Pool
hi
I want to save the entries into a Ztable using Module pool programming.. I want the Module Pool Program to work like the SM30 table maintenance...
Right now.. I have 2 module pool screen on the screen... one which displays the entries of Ztable and the other which is an input enabled screen so that I can enter records into it..
When I save the records the Ztable should get updated and when the screen again comes to PBO the enetered records should be displayed in the first table control
Right now I am stuck here
PROCESS BEFORE OUTPUT.
* MODULE STATUS_0001.r45
MODULE FILL_TABLE.
LOOP AT TBL_ZTVM3 into wa_ztvm3 WITH CONTROL TC1 CURSOR TC1-TOP_LINE.
ENDLOOP.
LOOP AT TBL2_ZTVM3 into ztvm3 WITH CONTROL TC2 CURSOR TC2-TOP_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT TBL_ZTVM3.
ENDLOOP.
LOOP AT TBL2_ZTVM3.
ENDLOOP.
MODULE USER_COMMAND_0001.
user command goes like this
*& Include YENTRIES_ZTABLE_I01
*& Module USER_COMMAND_0001 INPUT
* text
MODULE USER_COMMAND_0001 INPUT.
CASE SY-ucomm.
when 'SAVE'.
modify tbl2_ztvm3 from wa2_ztvm3 INDEX TC2-CURRENT_LINE.
ENDCASE.
ENDMODULE. " USER_COMMAND_0001 INPUT
SO quite a simple code.. but after 1 year I just lost touch with this.. I have defined the Selection Column check rows too for the table control
Can you please help me with this.. I <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 27, 2008 1:41 PMIN PAI of the Module flow logic
you need to modify the internal table with the modified content.
Like this
PROCESS AFTER INPUT.
MODULE EXIT AT EXIT-COMMAND.
MODULE CHECK_PAI.
LOOP WITH CONTROL TC.
MODULE MODIFY_DATA.
ENDLOOP.
IN side the MODIFY_DATA
You need to update the Internal table with the modified content. then your internal table will have the latest Information.
You save the latest information. -
Dynamic rows increment according to user input in Table Control Module Pool
HI All,
I'm doing a Table Control module pool Program. Now suppose there are two fields - MATNR & MAKTX.
Our requirement is while weu2019ll give the material No (MATNR field), material desc. will be populated in corresponding field (MAKTX field),
Now the problem is, while we are entering Material No. in 1st row it is Material Desc. coming in to corresponding field but while the data is given to next row it replaces the 1st rows data .
eg - ............................... ........ MATNR.............................MAKTX
1st entry in 1st row ..................... 23................................... XXX --after pressing 'ENTER' mat desc XXX comes. now 2nd entry in 2nd row 24 .............................. YYY --after pressing 'ENTER'
1st row details like MATERIAL NO(23) & Desc(XXX) got deleted & that is replaced by 24 YYY
We can not extend that no. of rows of Table Control Table more than one row.
If you kindly help me how it is possible to increase the no. of rows of that table dynamically without replacing the previous row it will be very helpful for me.
Thanks & Regards,
BiswajitHi Biswajit,
This probably means that the table control PAI is modifying the first line always in the internal table instead of current line
eg: we wite the code
loop at screen and then modify the internal table with current line
table_control => name of table control as given on screen
in PAI of the screen
loop at internaltable.
modify internaltable index table_control-current_line .
put a break point here and see*
it will always be updating the first record because of some reason - logic error or coding error*
endloop.
Also in PBO we can see that the internal table will be having just one record after the action mentioned above....it is a case of overwrite
To simply increment the number of lines
table_control-lines = table_control-lines + 1. in PAI
Pls check and revert
Hope it helps
Regards
Byju -
Suggest Program for Module Pool Programming
Dear All,
Please suggest me the best example i can do in Module Pool.
i want to make best use of Module pool.
thanks
RPu can create a ztable.
update that z-table with module pool program.
Create a table control and enter the data in that, update it through screens.
Regards,
Sujatha.
Maybe you are looking for
-
How to pass the default value to search help selection screen
Hi I need to push a certain value as a default value based on a condition to the slection screen of search help in web UI. Could you please let me know how can we do this? When we try to open the 'F4' help in web ui then it should populate a certain
-
Calling boolean function from tree query
Hi all, I have placed a tree on my sidebar region from the following query select PAGE_NO id, PARENT_PAGE_NO pid, NAME name, 'f?p=&APP_ID.:'||page_no||':&SESSION.' link, null a1, null a2 from #OWNER#.APEX_PAGES WHERE page_no = :APP_PAGE_ID AND nvl(na
-
Hello, I have an OfficeJet6600 printer and up until just yesterday this unit funtioned normally and had no trouble printing, scanning or copying from my computer. Yesterday however I found I could not scan and then worked with an HP support
-
Systemcontroller F12K not coming back
We had to power off our F12K and now after power on and booting the login for both systemcontrollers are unable since 80minutes now. Display on the panel shows code 9 , so I guess internal test.. but does it take so long ? Can I stop it and go on ?
-
Well i go to right click a new link to open in a new tab and it don't let me right click it does nothing... it doesn't bring me the drop down... == This happened == Every time Firefox opened