Enterprise 250 server problem
Hi,
I have sun etnerprise 250 server. When I start the server power is on, but its not showing any display on monitor. I think I have to reset my bios setup. how can reset the bois setting. Could any one tell how to reset this bios setup? If this problem is related to any other issue please let me.
1) If I start the bootable OS system will it work?
Thanks,
Here is your system's resource page in the Sun System Handbook (the "SSH").
http://sunsolve.sun.com/handbook_pub/Systems/E250/E250.html
There is a link on that page for "Related Documentation", where you'll find all the manuals.
There is no "bios" on a Sun SPARC-based system. Review the manuals.
The low level hardware layer is an OpenBoot environment, a.k.a. OBP.
The default output device is never a monitor, but is to the primary serial port (TTYa),
via a serial communications link to another computer -- think Hyperterminal.
Even if this particular system had been reconfigured to work with a Sun video card and a Sun monitor,
you must have a Sun keyboard/mouse kit plugged in for output to go to the screen.
No keyboard and/or no mouse? No signal to the monitor.
Additionally, if you've turned the keyswitch to the diagnostic position,
you force output to the TTYa port instead of any monitor, in a failsafe fashion.
Spend some time with the E250's manuals.
Similar Messages
-
"Drive not ready" can't boot the Sun Enterprise 250 Server 400MHz
Hi,
Because I can't ping it and got no response on the console, so I had to reboot the E250 server.
When I reboot SUN E250, I got the following message on the console and then it stops.
Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 1024 MB memory installed, Serial #15131886.
Ethernet address 8:0:20:e6:e4:ee, Host ID: 80e6e4ee.
Drive not ready
When I turned to diagnostic mode, I got the
Rebooting with command: boot
Boot device: net File and args:
Using Onboard Transceiver - Link Up.
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
When I reboot it, I got the following message on the console and then it stops.
Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 1024 MB memory installed, Serial #15131886.
Ethernet address 8:0:20:e6:e4:ee, Host ID: 80e6e4ee.
Drive not ready
When I turned to diagnostic mode, I got the
Rebooting with command: boot
Boot device: net File and args:
Using Onboard Transceiver - Link Up.
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
{0} ok printenv
Variable Name Value Default Value
tpe-link-test? true true
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pci-slot-skip-list none none
pci0-probe-list 1,3,2,4,5 1,3,2,4,5
upa-port-skip-list none none
diag-level min min
diag-script normal normal
diag-targets none none
diag-trigger power-reset power-reset
diag-continue? false false
diag-passes 1 1
diag-verbosity tests tests
More [<space>,<cr>,q,n,p,c] ? env-monitor enabled enabled
mfg-options server
#power-cycles 142
system-board-serial# 5015440072176
system-board-date 3a06ad42
fcode-debug? false false
output-device ttya screen
input-device ttya keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? true true
auto-boot-on-error? false false
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk:a disk net disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
More [<space>,<cr>,q,n,p,c] ? nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision 80 80 80 80 80 80 80 80 ...
last-hardware-update
diag-switch? false false
{0} ok devalias
screen /pci@1f,4000/TSI,gfxp@5
disk5 /pci@1f,4000/scsi@3/disk@c,0
disk4 /pci@1f,4000/scsi@3/disk@b,0
disk3 /pci@1f,4000/scsi@3/disk@a,0
disk2 /pci@1f,4000/scsi@3/disk@9,0
disk1 /pci@1f,4000/scsi@3/disk@8,0
disk0 /pci@1f,4000/scsi@3/disk@0,0
disk /pci@1f,4000/scsi@3/disk@0,0
scsi /pci@1f,4000/scsi@3
cdrom /pci@1f,4000/scsi@3/disk@6,0:f
ta¾pe /pci@1f,4000/scsi@3/tape@4,0
pcia /pci@1f,2000
pcib /pci@1f,4000
pci0 /pci@1f,4000
flash /pci@1f,4000/ebus@1/flashprom@10,0
nvram /pci@1f,4000/ebus@1/eeprom@14,0
parallel /pci@1f,4000/ebus@1/ecpp@14,3043bc
net /pci@1f,4000/network@1,1
ebus /pci@1f,4000/ebus@1
i2c /pci@1f,4000/ebus@1/SUNW,envctrltwo
floppy /pci@1f,4000/ebus@1/fdthree
tty /pci@1f,4000/ebus@1/se@14,400000
More [<space>,<cr>,q,n,p,c] ? ttya /pci@1f,4000/ebus@1/se@14,400000:a
ttyb /pci@1f,4000/ebus@1/se@14,400000:b
rscctl /pci@1f,4000/ebus@1/se@14,200000:sspctl
rsc /pci@1f,4000/ebus@1/se@14,200000:ssp
ttyc /pci@1f,4000/ebus@1/se@14,200000:ssp
ttyd /pci@1f,4000/ebus@1/se@14,200000:sspctl
keyboard! /pci@1f,4000/ebus@1/su@14,3083f8:forcemode
keyboard /pci@1f,4000/ebus@1/su@14,3083f8
mouse /pci@1f,4000/ebus@1/su@14,3062f8
name aliases
{0} ok boot disk
Boot device: /pci@1f,4000/scsi@3/disk@0,0 File and args:
Drive not ready
{0} ok probe-scsi-all
/pci@1f,4000/scsi@3,1
/pci@1f,4000/scsi@3
Target 0
Unit 0 Disk IBM DDYST1835SUN18G S94N
Target 4
Unit 0 Removable Tape HP C1537A L706
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011007
Target 8
Unit 0 Disk FUJITSU MAJ3364M SUN36G 0804
Target a
Unit 0 Disk SEAGATE ST336704LSUN36G 032C
Anyone knows what's the problem and how can I fix it?
CheersYou either have a mechanically or electronically failed disk drive or else your Operating System (I an presuming it is Solaris on that SPARC system) is completely mucked up.
If it is the OS at issue, you will need to install everything fresh.
If it is the 18GB disk drive, you will need to replace it and install everything fresh.
Either way, at some point you will have to go get your OS installation media and install everything fresh. The solution is not that difficult to understand. -
Sun Enterprise 250 Server; memory upgrade
Dear Gurus
Please let me know , if we can upgrade E250 memory from 1GB to 2GB and adding 100GB space.
Our hardware vendor is suggesting to replace the server as this is an EOL ( End of Life ) Server and can't upgrade the memory or disk.
Anybody have any clue?Hello Krishna,
the E250 is extendible upto 2 GB of RAM (16 modules each 128MB). If your system uses 16 modules 64MB each (1GB), all modules must be replaced with 128MB modules.
Even if the higher capacity (73 or 146GB) disks aren't listed in the E250 page of the Sun System Handbook they might work (but won't use the the Ultra160/Ultra320 mode, that means no increased thruput). If the system is under service contract, extending the system with these disks might invalidate the service contract. If the system isn't under service contract talk with the dealer or directly Sun about a trial.
The followup system of the E250 was the Fire V250 (upto 8 internal disks!), which went EOL in 09/05. The current followup is the Fire V240 (only upto 4 internal disks).
Buying or leasing a newer system is more expensive, but offers much higher performance (faster disks and much faster cpus). I would suggest to call Sun, probably you can Trade-In the system.
Sun Enterprise[tm] 250 Server
Full Components List - disks
Michael -
9i Enterprise Management Server License problem
9i database standard edition can use Enterprise Managament Server?
Enterprise Management Server can send a alert e-mail then some tablespace have large than the setting size.Questions like this should be addressed to your Oracle sales representative. No one here can give you a reliable answer,which passes into law. In general Management Packs require Enterprise Edition.
Werner -
IPlanet Enterprise Web Server hosting a portal server
Has anyone tried to port the Plumtree portal server component to iPlanet Enterprise Web Server (aka SunONE Web Server, v6.0 or later)? Plumtree doesn't support this, but I am trying to merge a custom SSO authenticator to the Plumtree portal (v5.0.1).
I have this working great in security mode 0 (with SSL turned off), but I am having a difficult time getting past one last issue in security mode 2 (full SSL mode). I can get the portal server to run fine in mode 2 through Tomcat on the same machine, using the same certificate and JRE. I can also get iPlanet to run other servlet applications fine with SSL turned on. However, there appears to be either: (1) an incompatibility between iPlanet's NSServlet plug-in that handles servlets and the Plumtree framework classes that set up replies via SSL, or (2) a configuration error in my setup somewhere. I'm hoping that (2) is the real culprit, but I've tried just about everything I can think of, and haven't been able to resolve this problem.
The server starts up fine and I can load non-portal content without a problem. But when I log in, the portal's main community page that should be returned is not being returned to the client. PTSpy doesn't indicate any problems, so I know the content is being built by the portal correctly, but the built page is never being sent back to the requesting client.
Here is the error that gets logged to iPlanet's error log:
[29/Dec/2003:15:05:53] failure ( 2772): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.NoClassDefFoundError: javax/net/ssl/SSLSocket
at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:793)
at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:702)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:583)
at java.net.URL.openStream(URL.java:960)
at org.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultReaderFactory.java:149)
at org.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.java:493)
at org.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:314)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1097)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:195)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at com.plumtree.openfoundation.xml.dom.XPBuilder.LoadDocumentFromURI(XPBuilder.java:203)
at com.plumtree.xpshared.jsutil.JSRegistry.LookupJSComponentVersions(JSRegistry.java:243)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponentVersions(JSRegistry.java:184)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:465)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:444)
at com.plumtree.uiinfrastructure.statichelpers.ConfigHelper.GetCommonJSIncludes(ConfigHelper.java:1330)
at com.plumtree.uiinfrastructure.form.AFormAS.DisplayCommonJavaScript(AFormAS.java:59)
at com.plumtree.portalpages.common.uiparts.PlumtreeAS.DisplayCommonJavaScript(PlumtreeAS.java:88)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayHead(PlumtreeDP.java:599)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:112)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.ProcessDisplayPageOrRedirect(Interpreter.java:816)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.HandleRequest(Interpreter.java:1589)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.DoService(Interpreter.java:448)
at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:141)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
It looks like a Java classpath issue, but I've verified (even in the same log file with java debugging turned on) that the SSLSocket class is getting loaded. I've even tried moving the specification of the jar file containing this class (jsse.jar, part of the JRE) to the beginning and end of my classpath setting.
I'm using the same JRE that is bundled with the Tomcat release supplied with my Plumtree 5.0.1 installation (1.4.1_02).
I've posted a similar message on a couple other forums (Java and iPlanet-related) and haven't found an answer yet. Does anyone have any ideas?
JohnIn case anyone else experiences this, I have apparently stumbled upon an issue with iPlanet's handling a specified JRE/JDK instead of the supplied JDK in iPlanet (SunONE) Web Server v6.0, SP5, though I found a way around it to resolve my problem.
I had been specifying a different JRE to run with through iPlanet's administrative server manager. However, even though I was specifying to load all the JRE's jar files in my classpath setting, iPlanet was only loading the rt.jar file for my specified JRE. With verbose logging turned on, the error log was indicating that the other classpath specified jar files were being loaded, but apparently they were not being used. The JDK that was released with iPlanet appears to be being used for all other JRE classes outside of those defined in rt.jar. Since the JDK supplied with the iPlanet release didn't contain jsse.jar, which contains SSL support, it was not being loaded and was causing the problem I was seeing.
Instead of specifying the JRE of a different JDK that I was using, I changed the global setting in the administrative server manager to override the entire JDK. This has resolved my problem.
So if you specify a JRE to override the iPlanet supplied JDK/JRE, it appears that only the rt.jar file of the specified JRE will be loaded, and the jar files associated with the iPlanet-supplied JRE will be used for all other classes. Specification of a complete JDK to override the supplied one will resolve this, and the portal server appears to work fine now in any security mode setting when hosted on iPlanet Web Server (SunONE), even though Plumtree doesn't support that as a host server application. -
Is there a way to use Apache Web Server to provide access to Server
Web
Folders without using Enterprise Web Server.
I have a server I upgraded to NetWare 6, this server has Enterprise
Web
Server running on it. After the upgrade the web part stop working. In
a
earlier post I had mentioned that I upgraded it from Novonyx; I had
comments of can't you drop Novonyx, or why are you still using Novonyx
when Novell is trying to go to Apache for its Web Server. I did as
suggested and renamed the Novonyx folder and reinstalled Enterprise
Web
Server, and reinstalled the SP3.
When you install Enterprise Web Server from the NetWare 6 installation
CD, It still adds a Novonyx folder. So the part of why are you still using Novonyx is a poor statement to make in trying to trouble shoot a
problem.
StevenNhunguyenvan,
> I useing Windows7, now I want conect to server setup Novell 6.0. Can you
> help me. Thanks a lot!
Connect to the webserver on NetWare 6.0?
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms -
I've read all the previous postings and can't resolve this after a week of re-installs, deleting files, PATH, Environment Variable changes, etc. Can someone please provide definitive advice on this? I'm installing on XP for now. Server Log File is as follows:
Thanks,
Jeremy
[#|2007-03-18T11:31:37.703-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
[#|2007-03-18T11:31:37.718-0400|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
C:/Sun/java\bin\java
-client
-XX:PermSize=32m
-XX:MaxPermSize=128m
-XX:+CMSPermGenSweepingEnabled
-XX:+CMSClassUnloadingEnabled
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=C:/Sun/SunAppServer8/domains/creator/logs/server.log
-Djava.endorsed.dirs=C:/Sun/SunAppServer8/lib/endorsed
-Djava.security.policy=C:/Sun/SunAppServer8/domains/creator/config/server.policy
-Djava.security.auth.login.config=C:/Sun/SunAppServer8/domains/creator/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=C:/Sun/SunAppServer8/domains/creator/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/Sun/SunAppServer8/domains/creator/config/cacerts.jks
-Djava.ext.dirs=C:/Sun/java/jre/lib/ext;C:/Sun/SunAppServer8/domains/creator/lib/ext;C:/Sun/SunAppServer8/derby/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=creator
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=C:/Sun/SunAppServer8/domains/creator
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=creator
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=C:/Sun/SunAppServer8/config
-Djava.library.path=C:\Sun\java\jre\bin\client;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\lib;C:\Sun\java\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
C:/Sun/java/lib/tools.jar;C:/Sun/SunAppServer8/lib/appserv-rt.jar;C:/Sun/SunAppServer8/lib\activation.jar;C:/Sun/SunAppServer8/lib\admin-cli.jar;C:/Sun/SunAppServer8/lib\appserv-admin.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_es.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_fr.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ja.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ko.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-cmp.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_es.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_fr.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ja.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ko.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-env.jar;C:/Sun/SunAppServer8/lib\appserv-ext.jar;C:/Sun/SunAppServer8/lib\appserv-jstl.jar;C:/Sun/SunAppServer8/lib\appserv-rt_es.jar;C:/Sun/SunAppServer8/lib\appserv-rt_fr.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ja.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ko.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-upgrade.jar;C:/Sun/SunAppServer8/lib\commons-launcher.jar;C:/Sun/SunAppServer8/lib\commons-launcher_es.jar;C:/Sun/SunAppServer8/lib\commons-launcher_fr.jar;C:/Sun/SunAppServer8/lib\commons-launcher_ja.jar;C:/Sun/SunAppServer8/lib\commons-launcher_ko.jar;C:/Sun/SunAppServer8/lib\commons-launcher_zh.jar;C:/Sun/SunAppServer8/lib\commons-launcher_zh_CN.jar;C:/Sun/SunAppServer8/lib\commons-logging.jar;C:/Sun/SunAppServer8/lib\deployhelp_es.jar;C:/Sun/SunAppServer8/lib\deployhelp_fr.jar;C:/Sun/SunAppServer8/lib\deployhelp_ja.jar;C:/Sun/SunAppServer8/lib\deployhelp_ko.jar;C:/Sun/SunAppServer8/lib\deployhelp_zh.jar;C:/Sun/SunAppServer8/lib\deployhelp_zh_CN.jar;C:/Sun/SunAppServer8/lib\dom.jar;C:/Sun/SunAppServer8/lib\driveradapter.jar;C:/Sun/SunAppServer8/lib\j2ee-svc.jar;C:/Sun/SunAppServer8/lib\j2ee.jar;C:/Sun/SunAppServer8/lib\j2ee_es.jar;C:/Sun/SunAppServer8/lib\j2ee_fr.jar;C:/Sun/SunAppServer8/lib\j2ee_ja.jar;C:/Sun/SunAppServer8/lib\j2ee_ko.jar;C:/Sun/SunAppServer8/lib\j2ee_zh.jar;C:/Sun/SunAppServer8/lib\j2ee_zh_CN.jar;C:/Sun/SunAppServer8/lib\jax-qname.jar;C:/Sun/SunAppServer8/lib\jaxr-api.jar;C:/Sun/SunAppServer8/lib\jaxr-impl.jar;C:/Sun/SunAppServer8/lib\jaxrpc-api.jar;C:/Sun/SunAppServer8/lib\jaxrpc-impl.jar;C:/Sun/SunAppServer8/lib\jdic_0_9.jar;C:/Sun/SunAppServer8/lib\jmxremote.jar;C:/Sun/SunAppServer8/lib\jmxremote_optional.jar;C:/Sun/SunAppServer8/lib\jsf-api.jar;C:/Sun/SunAppServer8/lib\jsf-impl.jar;C:/Sun/SunAppServer8/lib\mail.jar;C:/Sun/SunAppServer8/lib\PEtray.jar;C:/Sun/SunAppServer8/lib\relaxngDatatype.jar;C:/Sun/SunAppServer8/lib\rmissl.jar;C:/Sun/SunAppServer8/lib\saaj-api.jar;C:/Sun/SunAppServer8/lib\saaj-impl.jar;C:/Sun/SunAppServer8/lib\smbase.jar;C:/Sun/SunAppServer8/lib\smdb2.jar;C:/Sun/SunAppServer8/lib\sminformix.jar;C:/Sun/SunAppServer8/lib\smoracle.jar;C:/Sun/SunAppServer8/lib\smresource.jar;C:/Sun/SunAppServer8/lib\smspy.jar;C:/Sun/SunAppServer8/lib\smsqlserver.jar;C:/Sun/SunAppServer8/lib\smsybase.jar;C:/Sun/SunAppServer8/lib\smutil.jar;C:/Sun/SunAppServer8/lib\xalan.jar;C:/Sun/SunAppServer8/lib\xercesImpl.jar;C:/Sun/SunAppServer8/lib\xsdlib.jar;C:/Sun/SunAppServer8/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/SunAppServer8/imq/lib/jaxm-api.jar;C:/Sun/SunAppServer8/imq/lib/fscontext.jar;C:/Sun/SunAppServer8/lib/ant/lib/ant.jar
com.sun.rave.tray.RavePEMain
start
display
native|#]
[#|2007-03-18T11:31:46.921-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Sun\SunAppServer8\imq\bin].|#]
[#|2007-03-18T11:31:46.937-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5098: AS Socket Service Initialization has been completed.|#]
[#|2007-03-18T11:31:47.531-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0046:The Platform MBeanServer is available. It will be used to register Application Server MBeans. Platform MBeans will also be available for browsing while using standard JMX Console.|#]
[#|2007-03-18T11:31:47.546-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2007-03-18T11:31:47.812-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2007-03-18T11:31:48.296-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Created virtual server server|#]
[#|2007-03-18T11:31:48.296-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Created virtual server __asadmin|#]
[#|2007-03-18T11:31:48.984-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: 127.0.0.1/24700"|#]
[#|2007-03-18T11:31:49.281-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: 127.0.0.1/22060"|#]
[#|2007-03-18T11:31:49.281-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: 127.0.0.1/22061"|#]
[#|2007-03-18T11:31:50.015-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [24700]|#]
[#|2007-03-18T11:31:53.203-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1079: Initialization of AMX MBeans successful|#]
[#|2007-03-18T11:31:53.515-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Selecting file C:\Sun\SunAppServer8\lib\install\applications\MEjbApp.ear for autodeployment.|#]
[#|2007-03-18T11:31:55.718-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5109: EJBC - START of EJBC for [MEjbApp]|#]
[#|2007-03-18T11:31:55.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Processing beans ...|#]
[#|2007-03-18T11:31:55.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5110: EJBC - END of EJBC for [MEjbApp]|#]
[#|2007-03-18T11:31:56.000-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Total Deployment Time: 1688 msec, Total EJB Compiler Module Time: 63 msec, Portion spent EJB Compiling: 3%
Breakdown of EJBC Module Time: Total Time for EJBC: 63 msec, CMP Generation: 0 msec (0%), Java Compilation: 0 msec (0%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 47 msec (74%),
|#]
[#|2007-03-18T11:31:56.093-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|deployed with moduleid = MEjbApp|#]
[#|2007-03-18T11:31:56.203-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- reference-added MEjbApp]|#]
[#|2007-03-18T11:31:56.281-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2007-03-18T11:31:56.296-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- deploy MEjbApp]|#]
[#|2007-03-18T11:31:56.437-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: MEJBBean; containerId: 76954462832623616|#]
[#|2007-03-18T11:31:56.562-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2007-03-18T11:31:56.562-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2007-03-18T11:31:56.562-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Successfully autodeployed : C:\Sun\SunAppServer8\lib\install\applications\MEjbApp.ear.|#]
[#|2007-03-18T11:31:56.578-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Selecting file C:\Sun\SunAppServer8\lib\install\applications\__ejb_container_timer_app.ear for autodeployment.|#]
[#|2007-03-18T11:31:56.875-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5109: EJBC - START of EJBC for [__ejb_container_timer_app]|#]
[#|2007-03-18T11:31:59.890-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Processing beans ...|#]
[#|2007-03-18T11:31:59.906-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5110: EJBC - END of EJBC for [__ejb_container_timer_app]|#]
[#|2007-03-18T11:32:00.046-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Total Deployment Time: 3468 msec, Total EJB Compiler Module Time: 3031 msec, Portion spent EJB Compiling: 87%
Breakdown of EJBC Module Time: Total Time for EJBC: 3031 msec, CMP Generation: 594 msec (19%), Java Compilation: 2359 msec (77%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 16 msec (0%),
|#]
[#|2007-03-18T11:32:00.109-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|deployed with moduleid = __ejb_container_timer_app|#]
[#|2007-03-18T11:32:00.156-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- reference-added __ejb_container_timer_app]|#]
[#|2007-03-18T11:32:00.187-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2007-03-18T11:32:00.203-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- deploy __ejb_container_timer_app]|#]
[#|2007-03-18T11:32:00.343-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: TimerBean; containerId: 76954463102959616|#]
[#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Successfully autodeployed : C:\Sun\SunAppServer8\lib\install\applications\__ejb_container_timer_app.ear.|#]
[#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Sun-Java-System/Application-Server.|#]
[#|2007-03-18T11:32:00.718-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [__default-admingui] in virtual server [__asadmin] at []|#]
[#|2007-03-18T11:32:00.796-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2007-03-18T11:32:00.890-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [__asadmin] at [web1]|#]
[#|2007-03-18T11:32:00.906-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [__asadmin] at [asadmin]|#]
[#|2007-03-18T11:32:00.921-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2007-03-18T11:32:00.953-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [__asadmin] at [com_sun_web_ui]|#]
[#|2007-03-18T11:32:01.062-0400|INFO|sun-appserver-pe8.2|org.apache.catalina.core.StandardEngine|_ThreadID=10;|Starting Servlet Engine: Sun-Java-System/Application-Server|#]
[#|2007-03-18T11:32:02.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Initializing Grizzly Non-Blocking Mode|#]
[#|2007-03-18T11:32:02.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0703: Initializing Sun-Java-System/Application-Server-PE HTTP/1.1 on 29080|#]
[#|2007-03-18T11:32:02.671-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0712: Starting Sun-Java-System/Application-Server-PE HTTP/1.1 on 29080|#]
[#|2007-03-18T11:32:02.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Initializing Grizzly Blocking Mode|#]
[#|2007-03-18T11:32:02.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0703: Initializing Sun-Java-System/Application-Server-PE HTTP/1.1 on 22043|#]
[#|2007-03-18T11:32:02.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0712: Starting Sun-Java-System/Application-Server-PE HTTP/1.1 on 22043|#]
[#|2007-03-18T11:32:02.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Initializing Grizzly Non-Blocking Mode|#]
[#|2007-03-18T11:32:02.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0703: Initializing Sun-Java-System/Application-Server-PE HTTP/1.1 on 25848|#]
[#|2007-03-18T11:32:02.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0712: Starting Sun-Java-System/Application-Server-PE HTTP/1.1 on 25848|#]
[#|2007-03-18T11:33:02.968-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Service com.sun.enterprise.admin.server.core.JmxConnectorLifecycle@1a428d5 cannot be started! : com.sun.appserv.server.ServerLifecycleException: Cannot bind to URL [rmi://192.168.61.2:29686/management/rmi-jmx-connector]: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
java.net.SocketTimeoutException: Read timed out]|#]
[#|2007-03-18T11:33:02.968-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: Cannot bind to URL [rmi://192.168.61.2:29686/management/rmi-jmx-connector]: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
java.net.SocketTimeoutException: Read timed out]
at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onStartup(JmxConnectorLifecycle.java:104)
at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
at com.sun.rave.tray.RavePEMain.main(RavePEMain.java:37)
Caused by: java.io.IOException: Cannot bind to URL [rmi://192.168.61.2:29686/management/rmi-jmx-connector]: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
java.net.SocketTimeoutException: Read timed out]
at javax.management.remote.rmi.RMIConnectorServer.newIOException(RMIConnectorServer.java:814)
at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:431)
at com.sun.enterprise.admin.jmx.remote.server.JmxConnectorServerDriver.startConnectorServer(JmxConnectorServerDriver.java:177)
at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onStartup(JmxConnectorLifecycle.java:95)
... 4 more
Caused by: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
java.net.SocketTimeoutException: Read timed out]
at com.sun.jndi.rmi.registry.RegistryContext.bind(RegistryContext.java:122)
at com.sun.jndi.toolkit.url.GenericURLContext.bind(GenericURLContext.java:208)
at javax.naming.InitialContext.bind(InitialContext.java:359)
at javax.management.remote.rmi.RMIConnectorServer.bind(RMIConnectorServer.java:635)
at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:427)
... 6 more
Caused by: java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
java.net.SocketTimeoutException: Read timed out
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:274)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:306)
at sun.rmi.registry.RegistryImpl_Stub.bind(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.bind(RegistryContext.java:116)
... 10 more
Caused by: java.net.SocketTimeoutException: Read timed out
at com.sun.enterprise.server.ss.ASInputStream.waitForSelect(ASInputStream.java:123)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:81)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:73)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:235)
at java.io.DataInputStream.readByte(DataInputStream.java:241)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:215)
... 14 more
|#]
[#|2007-03-18T11:33:02.968-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Server Startup failed. Exiting...|#]
[#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Server shutdown in progress...|#]
[#|2007-03-18T11:33:02.968-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException
at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onShutdown(JmxConnectorLifecycle.java:122)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:414)
at com.sun.enterprise.server.PEMain.run(PEMain.java:317)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
at com.sun.rave.tray.RavePEMain.main(RavePEMain.java:37)
|#]
[#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0303: Stopping Sun-Java-System/Application-Server.|#]
[#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0713: Stopping Sun-Java-System/Application-Server-PE HTTP/1.1 on 29080|#]
[#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0713: Stopping Sun-Java-System/Application-Server-PE HTTP/1.1 on 22043|#]
[#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0713: Stopping Sun-Java-System/Application-Server-PE HTTP/1.1 on 25848|#]
[#|2007-03-18T11:33:03.125-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5051: Shutting down all J2EE applications ...|#]
[#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5122:EJB Timer Service shutdown at [2007/03/18 11:33:03]|#]
[#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE 5060 : Stopping all J2EE Connector 1.5 Compliant resource adapters ...|#]
[#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7094: __xa shutdown successfully.|#]
[#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE 5061 : Resource adapters Stop() Complete|#]
[#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5052: Application shutdown complete.|#]
[#|2007-03-18T11:33:03.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5025: JMS service shutting down.|#]
[#|2007-03-18T11:33:03.890-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5026: JMS service shutdown complete.|#]
[#|2007-03-18T11:33:03.890-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Server stopped due to Server startup failure.|#]
[#|2007-03-18T11:38:11.046-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
[#|2007-03-18T11:38:11.046-0400|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
C:/Sun/java\bin\java
-client
-XX:PermSize=32m
-XX:MaxPermSize=128m
-XX:+CMSPermGenSweepingEnabled
-XX:+CMSClassUnloadingEnabled
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=C:/Sun/SunAppServer8/domains/creator/logs/server.log
-Djava.endorsed.dirs=C:/Sun/SunAppServer8/lib/endorsed
-Djava.security.policy=C:/Sun/SunAppServer8/domains/creator/config/server.policy
-Djava.security.auth.login.config=C:/Sun/SunAppServer8/domains/creator/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=C:/Sun/SunAppServer8/domains/creator/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/Sun/SunAppServer8/domains/creator/config/cacerts.jks
-Djava.ext.dirs=C:/Sun/java/jre/lib/ext;C:/Sun/SunAppServer8/domains/creator/lib/ext;C:/Sun/SunAppServer8/derby/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=creator
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=C:/Sun/SunAppServer8/domains/creator
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=creator
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=C:/Sun/SunAppServer8/config
-Djava.library.path=C:\Sun\java\jre\bin\client;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\lib;C:\Sun\java\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
C:/Sun/java/lib/tools.jar;C:/Sun/SunAppServer8/lib/appserv-rt.jar;C:/Sun/SunAppServer8/lib\activation.jar;C:/Sun/SunAppServer8/lib\admin-cli.jar;C:/Sun/SunAppServer8/lib\appserv-admin.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_es.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_fr.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ja.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ko.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-cmp.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_es.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_fr.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ja.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ko.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-env.jar;C:/Sun/SunAppServer8/lib\appserv-ext.jar;C:/Sun/SunAppServer8/lib\appserv-jstl.jar;C:/Sun/SunAppServer8/lib\appserv-rt_es.jar;C:/Sun/SunAppServer8/lib\appserv-rt_fr.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ja.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ko.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-upgrade.jar;C:/Sun/SunAppServer8/lib\commons-launcher.jar;C:/Sun/SunAppServer8/lib\commons-launcher_es.jar;C:/Sun/SunHi,
Seems you are having socket time out exception. I use to get the same while deploying on XP with (640MB RAM) but able to re-run after freeing some memory. Creator needs optimally atleast 1GB RAM. You have not mentioned your machine RAM...
It might just help..
dr.am mohan rao -
I couldn't login to the Enterprise Manager Server by EMC
Dear all:
couldn't login to the Enterprise Manager Server by Enterprise Manager Console.
EMC is in Start Menu->Programs->OWB_ORACLE_HOME->Warehouse Builder->Enterprise Manager Console.
After clicking EMC, then the screen is represent by Login window at my database when I selected my database.
But, when I put user name/password in this window, there is no response.
How can I login to EMC? When I checked manual, I found that I have to start Oracle Management Server but I don't know how I can start OMS. Also, how can I create OEM repository?
Please let me know what it is problem.
Thank you.
JWS.Hi
Enterprise Manager Server is a service, you can start it in the control panel/administrative tools/services.
To create a repository run the enterprise manager configuration assistant.
To login to EMC se the help for the default username/pwd.
Ott Karesz
http://www.trendo-kft.hu -
Report Scheduling (Business Enterprise 10 server)
Post Author: isholaomoeko
CA Forum: Publishing
Dear all,
Can anyone please help?
When I schedule a report to run at a certain time and the report is modified or deleted. The schedule also gets deleted on the Business Enterprise 10 server.
My problem is that I want to be able to modify, delete or replace the report without having to reschedule it on the Business Enterprise 10 server.
Please I need your help urgently.Post Author: gyazgan
CA Forum: Publishing
There must be a way. Because our CE Admin keeps the report scheduling and history when he promotes my modified reports. -
Sun sparc enterprise t5140 server bus speed
Hello,
what bus speed have sun sparc enterprise t5140?
I found these datasheet:
http://www.google.com/url?sa=t&source=web&cd=4&sqi=2&ved=0CFYQFjAD&url=http%3A%2F%2Fwww.oracle.com%2Fus%2Fproducts%2Fservers-storage%2F036000.pdf&rct=j&q=sun%20sparc%20enterprise%20t5140%20server&ei=5R5STv-fIIOj-gav6tSNCw&usg=AFQjCNGEaD-shDgGEAaz0_z3MivZV8fqFg&cad=rja
http://www.google.com/url?sa=t&source=web&cd=5&sqi=2&ved=0CF8QFjAE&url=http%3A%2F%2Fwww.qassociates.co.uk%2FDownloads%2FSun-SPARC-Enterprise-T5140-Server-Datasheet.pdf&rct=j&q=sun%20sparc%20enterprise%20t5140%20server&ei=5R5STv-fIIOj-gav6tSNCw&usg=AFQjCNF_MUMSSFfWX3ZaWH62xFUo2oo5jw&cad=rja
but without bus speed specification.
Thanks a lot.Hi.
It's problem found same bus on T5140 becouse this server have different architecture.
See http://www.oracle.com/technetwork/articles/systems-hardware-architecture/sun-t5120-t5220-t5140-t5240-163910.pdf
Memory controller, PCI-E controller,10 Gb/s Ethernet - integrated at CPU and connected via crosbar.
The crossbar provides approximately 300 GB/sec of bandwidth
Regards. -
Hosting two portals on a single instance of enterprise portal server
Hi,
We have a requirement to host two different portals on a single instance of enterprise portal server. The URLs to the portals would be different. Also for logging into the portal, one portal would have only User ID and Password and
the other may have Retailer ID, User ID and Password for logging.
I am trying to understand what kind of an approach needs to be followed. There
is a single instance of Oracle server where PCD is stored.
How will authentication/authorization happen and how would the user data be stored for both the portals in a single instance of Oracle database.
Thanking you in advance,
Regards,
VeenaHi,
in general, could do that by using a distinct role concept. With the "Collection of base rules" you can assign different portal desktops with different layouts to everyone based on criterias like groups, roles or users.
We have 4 very different portals running inside one instance. Every portal has its own standardized structure and is selected by logon groups, that points to roles, which points to desktops.
What will not work is a logon concept other than "userid, password". SAP, by default. only allows standard authentication with userid and password or ticket. Even if you use an LDAP that would have that distinction, you cannot query that property without modifying the system
If you want to use anything different, you have to write a new logon handler for the logon stack (using JAAS). This is tricky, but not outrageous difficult. We have implemented three different new steps in the logion stack, each handles a different case, from ip-based logon, ticket or LDAP query. It is possibly, all of them don't have more than 20 lines of java.
But, still tricky.
It is a broad theme and you can try it out with showcasing two different desktop themes belonging to two different roles. Than you can work your way through tge problems.
In terms of database, it makes no distinction. You work solely with the PCD, and that is stored in the database. We are using DB2 and I've never touched the DB at all.
HTH
hs -
Installation Iplanet 4.1 Enterprise Web Server on Linux RedHat 7.1
I am trying to install IPlanet 4.1 Enterprise Web Server on Linux RedHat 7.1.
After unloading the software from CDROM to a temp directory, and run ./setup, I get the following error:
eroor while loading shared libraries; libncurses.so.4: cannot load shared object file : no such file or directory.
Has anyone know how to resolve it??. Thanks.
regards,
Benny TanI have answered for this topic previously for another thread. Please follow the URL to see the answer.
http://forum.java.sun.com/thread.jsp?thread=257294&forum=14&message=968185 -
How do I set up a private enterprise messaging server?
The iPad and iPhone messaging app seems to require that the messaging server must be in the Apple cloud. Is there a way to set up a private enterprise messaging server?
Is there a way to set up a private enterprise messaging server?
Yes: http://lync.microsoft.com/en-us/Pages/unified-communications.aspx -
How to fix "server problem" error message when trying to use PhoneGap build service.
I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app. Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project. I did notice that the configuration file was created at the site root. I've seen a few other similar threads on this, but no solution. I've checked on any firewall issues (none) and know that the PhoneGap server is not down. The problem is on my end.
Thanks,
LorenNot an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.
-
[Fwd: Starting Managed server problem ......]
Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.Hello Satya/All,
I'm also experiencing the exact problem you are facing. It would be great if
somebody could help in this regard at the earliest.
Thanks, senthil
Satya Ghattu <[email protected]> wrote:
Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted
CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create
an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due
to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.
Maybe you are looking for
-
Help, I have two Itunes accounts, and one ipod.
I downloaded Itunes on a friends computer and purchased a bunch if songs. When I tried to get my tunes onto my laptop, the message came up "the owners I-pod is linked to another itunes library. Do you want to change it (or something like that)?" The
-
Please help, I don't want to lose my pictures or music!
-
Filename Compatibility: Win XP Pro Illustrator CS2
Hi, I'm having a problem when saving to web. I don't have spaces in my filename but when I save for web, my filename gets truncated to 30 characters. I go to my output settings and uncheck Mac & Unix to set the filename compatibilty to Windows only I
-
How to export in a format Quicktime can read?
I'm using CS4 on Mac OS X 10.6.2. I've created an image sequence movie with Quicktime Pro, which resulted in a 5.81GB file. I then imported the movie into Premiere to compress it. The export settings from Premiere were: - H.264 - 24 frames - Progr
-
XI - HTTP Action Block Error !
Hi Guys! I have problem when using XI HTTP Action block. Everthy worked fine few days back , now i get below error strange [ERROR]: Error: Status (502): Proxy Error ( The specified network name is no longer available. ) [ERROR]: ACTION FAILED: End A