Enterprise 600 m602n IPX/SPX Configuration

Good Day All
My organization recently purchased a number of hp laserjet enterprise 600 m602n printers to replace an ageing fleet of 4000 series printers attached to external jetdirect cards. The printers being replaced recieve jobs by both TCP/IP IPv4 and IPX/SPX. Page 62 of the m602n user manual says IPX/SPX is a other supported network protocol. Page 147 says "The HP Embedded Web Server does not support IPX-based product connections." My problem is if it is a supported network protocol how do I configure it? I see nothing in the Web Server which is to be expected from the verbage on page 147, but I also see no means to do so going through the front menu controls or via TELNET. Any thoughts would be appreciated.
Thank You
This question was solved.
View Solution.

According to HP Business Support the notation that it is a support network protocol in the user manual is a misprint. It does not support IPX/SPX directly.

Similar Messages

  • No Printer Resolution Options for hp LaserJet Enterprise 600 M601

    Running under Mac OS 10.6.8, we've run into a problem printing separations to our new hp LaserJet Enterprise 600 m601 printer from Illustrator CS4, CS5 and CS6.
    In the printer dialog box, once under the "Output" section, with the mode set to either "Separations" or "In-RIP Separations", there are no options listed in the "Printer Resolution" drop-down.
    I've tried re-installing the driver, changing the resolution settings in the printer itself, using a generic PS driver, and contacting hp directly (their solution was to contact Adobe). I have yet to contact Adobe itself, but none of my other attempts netted a different result.
    In the document ink listing, the Frequency and Angle listings are still editable, but needs to be done manually for every colour, and the dot shape options are non-existant.
    We had previously been using a hp LaserJet 2300n, but we were running into insufficient memory issues on an increasingly frequently basis. The driver for the 2300n had several different sets of Printer Resolution settings, so once the new printer was set up, I *assumed* that it would have the same kind of options.
    I have discovered that if I change my PPD from the proper driver (HP LaserJet 600 M601 M602 M603) to the old one (Hp LaserJet 2300) I am then able to select the resolution I want from the drop-down list, switch the PPD back to the proper one for the M601, and it seems to work (leaving the 2300 as the PPD file results in a warning and a failed print attempt).
    I also tried printing something from a non-Adobe program using the M601, and there were two options available for printer quality (resolution?) settings.
    Any thoughts?

    Re instakll the printers driver first remove the printer from the printer list.
    My only thought!

  • Oracle 10g inside IPX/SPX network

    Hi All,
    I am a newbie in Oracle. May I know if it is possible to setup an Oracle database inside an IPX/SPX network? I have tried setting up the TNS and listeners according to some "HOW-TO" docos for 8i but it didn't work......
    ps. That network must not use TCP/IP hence comes the problem...
    Thank you very much!
    Edited by: user10988687 on Dec 13, 2009 7:35 PM

    Tako Au wrote:
    I am going to use named pipe (Both the servers and the clients are Windows PC), is that possible to run named pipes over IPX/SPX?Yes. There are (or were) NetBIOS drivers for the NT kernel that allowed you to run named pipes over IPX/SPX. This enabled Microsoft services (like file and print sharing) to work across a Novel network (especially since the default NetBEUI was not routable).
    Oracle at one time even shipped the Oracle RDBMS server as a NLM. :-)
    But I find it very strange that you are still using an IPX/SPX network. This pretty much died out at the end of last century. IP networks provide significantly more flexibility. increase robustness, better security and so on.

  • Oracle Enterprise Repository + Web logic server configuration

    Hi,
    I have installed Oracle Enterprise Repository 11g, I would set web logic server with application server fo OER, when I started the configuration tool of web logic server (config.sh), in the second screen 'Generate a domainconfigured automatically to support the following products', there isn't 'Oracle enterprise Repository - 11.1.1.2.0'.
    Why?
    Regards
    Leopoldo

    Hi Nitin
    1. Refer: http://otn.oracle.com/products/reports/htdocs/getstart/examples/Tools/index.html
    2. You can develop reports using Report Builder that comes with Oracle 9iDS. Alternatively, since Reports 9i supports .jsp/.xml/.html input files, you can also "hand code" your reports. Moreover, you can create reports JSP file using JDeveloper.
    3. iDS suite comes with Reports Developer, Runtime and Server. You need iAS to deploy your reports.
    Oracle Database is required if you go for Job Repository and several other options with Reports. Oracle Reports per se does not require Oracle database to be installed.
    Regards
    Sripathy

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Enterprise structure configuration

    Hi,
    How to configure a sample enterprise structure?
    Steps for configuration ?
    Can abybody send me this on following address?
    [email protected]
    Thank you very much ......

    Hi,
    As a starting point, you can read the online help :
    http://help.sap.com/saphelp_srm50/helpdata/en/2c/867d3ca2156c6ae10000000a114084/content.htm
    Yind regards,
    Yann

  • Steps to configure Enterprise Manager (oracle 10g with Window2003 Entp OS

    Hi Experts,
    Could any one provide me with steps to configure Enterprise Manger.
    Also let me know any parameter or services to be cheked before starting the Enterprise Manager.
    I am facing problem while configuring it, I would be thankful to you if u can provide me details.
    So that I can start once again configuring Enterprise Manager.
    Regards
    Sri

    To configure please run the command emca -config dbcontrol db -repos create
    Edited by: mnazim on Mar 10, 2011 9:38 PM

  • NW 6.5 and DOS-IPX-Clients via IP-Router (IPX-Proxy)

    Hi,
    we`ve got new routers (Layer-3 switches) which don`t supports "IPX/SPX".
    Unfortunatly we have some DOS 6.22 clients which use IPX to connect to our
    Netware 6.5 Server.
    These clients are difficult to change (maschines in production-line)
    they have to load/ and save configuration files from the network.
    Have you any idee, how can we manage this?
    Is there a kind of IPX-Proxy which tunnels the IPX-packets in IP and
    forwards it to the Netware server?
    Thank you very much.
    Lothar

    Lothar,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HP Laser Jet 600 m602 printing issues

    Device: laserjet 600 m602
    Issue: error submitting print jobs through print server or directly.
    Printer can be normally pinged and managed through web UI.
    However last event log entry is dated April 30 with error codes 49.2F.E3 and 49.2F.51.
    Since then I have managed to upgrade firmware to latest however nothing changed.
    Print job sumbitted directly from web UI reports success while nothing gets printed while printing normally generates error printing status in the job queue. Any help greatly appreciated.

    Hi damjano,
    The HP LaserJet Enterprise 600 Printer M602 series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Also, here is a link to the support page:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • 10g - how to configure sso with iis-

    hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
    but I always meet this message.
    Not Logged In
    You are not currently logged in to the Oracle BI Server.
    If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
    what steps are missing?
    how to check?

    hi, experts,
    I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
    at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
    however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
    any setup on IIS are wrong? thank you very much!
    =========================================================================================
    Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
    Type: Error
    Severity: 40
    Time: Thu Feb 17 14:48:46 2011
    File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
    Properties: ConnId-1,1;ThreadID-1796
    Location:
         saw.odbc.connection.open
         saw.connectionPool.getConnection
         saw.subsystem.security.checkAuthenticationImpl
         saw.threadPool
         saw.threads
    Odbc driver returned an error (SQLDriverConnectW).
    State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
    [nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
    Type: Error
    Severity: 42
    Time: Thu Feb 17 14:48:46 2011
    File: project/webconnect/connection.cpp Line: 276
    Properties: ThreadID-1796
    Location:
         saw.connectionPool.getConnection
         saw.subsystem.security.checkAuthenticationImpl
         saw.threadPool
         saw.threads
    Authentication Failure.
    Odbc driver returned an error (SQLDriverConnectW).
    ---------------------------------------

  • Help HP LaserJet 600 Device type

    Hello everyone,
    I've had a problem finding the device type for the following printers:
    -          HP LaserJet Enterprise 600 M601n
    -          HP LaserJet Enterprise 600 M603dn
    I've checked in HP web page, I've checked Note 8928 and still havent found the device types. Can anybody help me?
    Thanks,
    Beatriz

    Hello,
    Check the following link:
    http://h71028.www7.hp.com/enterprise/downloads/HPPrinterSAP-DT2011.pdf
    http://h71028.www7.hp.com/enterprise/cache/37011-0-0-225-121.html
    You can use Device type ZHPLJCM1, and also you can try device type SAPWIN.
    Regards,
    David

  • I have a hp laserjet 600 m602 that will print 8 1/2 by 11 prints at 50 ppm when I change to custom

    I have a laserjet 600 m602 when I change it to custom it prints so slow its going backwards is there any way around this
    the paper is 8 1/2 by 10 1/2  actually shorter why does it take longer  

    HI JOHNS55,
    I hope you are doing well and welcome to the HP forums;
    Quick suggestion if you are refering to the HP LaserJet Enterprise 600 Printer M602, This is a commercial product. I suggest searching and even posting in the forum for HP Business Support for a better chance at finding a prompt solution.
    You may find the commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Hope you find the help you need,
    RobertoR
    Remember . . .
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • BPM Enterprise - Can's see the Deploy

    Hello all
    I am new to BPM and i am trying to deploy into bpm enterprise and i hope somebody could help me
    I have installed and configured everything needed (weblogic server, bpm enterprise, bpm studio) and i configured and i have created a bpm directory service, bpm domain, etc (using the configuration wizard)
    I am trying to deploy a sample proyect. I followed the admin guid and i deployed using Process Administrator --> Proyects, deploy etc (i used the option smart publish)
    How can i access my deployed application???
    I accessed to workspace application (using the admin account so that i have admin privileges and i can see all the deployments) and i don't see my deploy :(
    Am I missing or doing something wrong?
    Thanks in advance to all :)

    Hi,
    In the web based Process Administration tool, add a 'test' participant. Assign this participant all the roles inside your process.
    Log into the Workspace using this new participant. If this doesn't work try starting and stopping the Engine from the Process Administration tool.
    Hope this helps,
    Dan

  • Error in Automatic configuration of solman

    Dear Experts:
    I am performing managed system configuration for a portal system in our landscape. Solman version 7.1 sps 8. Portal 7.0 ehp2. Wily version 9.0
    In the final step automicatic confifuration. I am seeing this error"Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration". has any one else seen this before. 
    SidAdm is the owner for wilyintroscope instlal folder.
    Please let me know your thoughts.
    Message
    Details
    On instance : sapTP0ci/JC00
    Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration
    On instance : sapTP0ci/JC00
    Created destination TP0_JC00_server0
    Created destination SapStartSrv_sapTP0ci_TP0_00
    Created action SAP GC|TP0_JC00_server0 - SAP GC|TP0_JC00_server0
    Created action TP0|sapTP0ci_TP0_00 - SapStartSrv_sapTP0ci_TP0_00
    Created 2 action(s).
    Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration.
    Exception
    java.sql.SQLException: All configured Enterprise Managers are offline - check configuration.
    at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:560)
    at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:879)
    at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:953)
    at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:582)
    at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:342)
    at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:100)
    at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:64)
    at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:134)
    at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:578)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:445)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:674)
    at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:2058)
    at com.sap.sup.admin.setup.SapCluster.runClusterSetup(SapCluster.java:2298)
    at com.sap.sup.admin.setup.ws.SetupWrapper._rManagedSetup(SetupWrapper.java:500)
    at com.sap.sup.admin.setup.ws.SetupWrapper.managedSetup(SetupWrapper.java:327)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:331)
    at com.sap.engine.services.webservices.runtime.JavaClassImplementationContainer.invokeMethod(JavaClassImplementationContainer.java:76)
    at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
    at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
    at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
    at SoapServlet.doPost(SoapServlet.java:51)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hugo Amo is correct, you have to check the wily configuration on solman_setup 3.1 (Configure CA wily Introscope), there you can see the status of connection between solman and wily.
    for a correct configuration just follow that steps:
    1.- click on edit button
    2.- click on "import exiting Installation"
    3.- on popup enter the path where wily is installed like F:\usr\sap\ccms\instroscope
    4.- click on user management and select flag for connection user
    5.- save
    you have to get the status green like this one
    Regards,
    Luis

  • Post Installation task of Enterprise Portal

    Subject : During the Post Installation task of Enterprise Portal such as Run Configuration Wizard u201CNWA_01u2026..u201D to u201CNWA_07u2026..u201D for portal system. Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.
    Problem : Can anyone guide me how we are doing ( executing ) task i.e.Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.What this is step is doing as well as what all the prerequisites for this step.
    Work Area : Dev portal with Java stack only.( SP Level is 17)
    Please guide me on this step as well as all Configuration Wizard steps( NWA_01 to NWA_07) so that I can finish with the post installation of portal.
    Regards
    Nilesh

    Hi my question has been resolved.

Maybe you are looking for