Enterprise Compensation Management - Mass date change of IT 0759

We run ECC 5.0 SP45 (for HR)
We currently use the Enterprise Compensation Management (ECM) process for our Merit Increases and Bonus assignments.
This year, at the end of the process (meaning that everyone is in Approved status on IT 0759), Management decided to change the effective date of the Merit Increases.
Does anyone have a suggestion (other than create a bdc session) that would allow me to mass change the effective date of this particular comp. review item on IT 0759, without impacting the bonus review item?

Hi Laural,
Instead of BDC, you can use the ECM function modules.
Get the infotype data through HR_ECM_READ_INFOTYPE
and change the data through HR_ECM_MODIFY_INFOTYPE.
And the BEGDA and ENDDA in 759 would be the same as of the payment date. So you would be changing both dates here to the new payment date.
I cannot think of any other alternative solution.
Hope this helps.
Cheers,
Subbu

Similar Messages

Enterprise Compensation Management without Budgeting & LTI

Hi Experts,
Please guide me whether we can go ahed witout configuring or maintaining the Budgeting & LTI sections in Enterprise Compensation Management.
Client does not have any budgeting practices, only Bonus(Yearly),Incentives(Yearly),Salary survey
Salary changes sometims happens in the organization.
We want to maintain only above practices.
Can any one please suggest me on the same & let me know if yes the which all aares we can cover to go ahead.
Thanks.

Hi,
Budgeting & LTI are not required for you to implement SAP Enterprise Compensation Management. They are seperate sub-modules within ECM. From what it sounds like your requirements are just to implement annual bonus and merit each year. If this is the case you can implement only the "Compensation Administration" section within ECM. This would be located in the SAP IMG under Personnel Management --> Enterprise Compensation Management --> Compensation Administration.
Thanks,
Imran

Enterprise Compensation Management ECC6.0

Hi Gurus,
We are currenlty unsing Compensation Management on 4.6c. We are going to upgrade to ECC6.0 and want to use Enterprise Compensation Management. Can configuration of Compensation Management of 4.6c be reused or do we have to Configure ECM from scratch?
Thanks

Q: We use PA-CM already for some countries and want to implement
PA-EC for other countries. Do we have to replace PA-CM by PA-EC for
all countries at once?
A: Most of the functionality of old and new Compensation can be used
in parallel in the same system. The two modules use different
database tables, transactions, and Portal iViews. But there are a
few restrictions concerning integration of the LTI application with
other modules. The following functionality can only be used for
either PA-EC or PA-CM:
a) Payroll of LTI exercises (payroll function XLTI)
b) Display of LTI in the Total Compensation Statement
c) Stock Option Accounting (accruals for costs caused by LTI
exercises)
This functionality reads data from PA-EC, if the flag 'Switch for
Activating Enterprise Compensation Mgmt' in the IMG step 'Activate
Enterprise Compensation Management' is set. Otherwise, it reads the
data of PA-CM.

Enterprise Compensation Management Info Cube

SAP BI contains a special enterprise compensation management InfoCube and queries that can be used to analyze all compensation data in detail. Now, if one has to use R/3 4.6C for the backend compensation management, can this InfoCube (using BW 3.5 on NW '04) be leveraged?...or, does the back-end have to be upgraded to the '04 Business Suite level?
Quick response from someone who has done it or from SAP will be highly appreciated!!!

Bryan,
Great response. One last question: The comment you have made about what we get with "BI Content 3.5.1 (same as BI Content 3.3 Add-on)" in terms of the "1 InfoCube, enabling the evaluation of LTI awards" is of particular interest to us. To leverage this BI content, what should be in the back end? In other words, can I leverage this BI business content using R/3 4.6C in the backend or will I need to upgrade to mySAP ERP (NW '04) and mySAP HCM?
Thanks and regards,
Puneet
> Puneet,
>
> Yes, you can still use those in BW 3.5. If you go to
> the Business Content tab in the Administrator
> Workbench you'll see them. You can also check
> help.sap.com and the Service Marketplace alias /bw
> for more details on the content delivered with each
> release.
>
> With BI Content 3.5.1 (same as BI Content 3.3 Add-on)
> there is additional content delivered:
>
> The BW Business Content for mySAP HR Enterprise
> Compensation Management comprises:
>
> Extractors for transferring data from
> mySAP HR Enterprise Compensation Management (PA-EC)
> to SAP Business Information Warehouse
>
> Predefined Data Models, including:
>
> 8 ODS objects, collecting data about compensation
> processes, compensation budgets, employee pay
> categories, composite market data, raw market data,
> job matching, salary structure of jobs as well as
> active and planned salary structures
>
> 5 InfoSets, providing data on compensation processes,
> compensation budgets, Comparison of Market Data and
> Employee Payment, Salary Survey Market Data and Job
> Matching as well as Comparison of Salary Structure
> Against Market
>
> 1 InfoCube, enabling the evaluation of LTI awards
>
> 24 predefined standard queries
>
> Increased visibility of all information around the
> compensation management process at your enterprise.
>
> Thanks,
> Bryan
>
>
> Message was edited by: Bryan Katis

Enterprise Compensation management Planning iView

Hello,
We're busy implementing ECM for ECC6 and Portal 7. On the Compensation Planning iView and page, there is a link to 'Show Statistics' and according to SAP's formal documentation, this could be eliminated from the page/iView, if the user so desired.
The iView has no recognizable property for this functionality to be put on or off.
Does anyone have an idea where this could be disabled?
Help with be greatly appreciated.
Regards,
Charmaine

Hi,
We actually had a customer message opened for this with SAP. Please follow below steps (you'll need the Self-Service role):
1. Select the Define Perspectives for the ECM Planning FPM Application.
a. Portal Content->Content Provided by SAP->srvconfig->com.sap.pct.erp.srvconfig.mss->Enterprise Compensation Management->FPM Applications-> ECM Planning
2. Select the CAP View tab.
3. Select the Additional Information CAP item and Delete.
4. Select the Plan perspective. Select the Show Statistics CAP item and Delete.
5. Save all changes.
Hope this works.
Carrie

Standard tcode for (mass) data change of internal orders or ... ??

Hi!
I really need some info if there by any chance SAP has standard transaction for mass data change of internal orders (more particular, distribution rules in settlement rule section, which can be found in KO02 transaction ).
I am trying to change distribution rules for settlement receivers in settlement rule section, that is finish past distribution rules by filling TO PERIOD and TO FISCAL YEAR fields on the right of each rule, and then entering new rules (which i get from external source -flat file, ms excel, csv...).
If i wanted to import data in SAP i guess i would have to develop a Batch Input. But that would take me some time to develop because it is pretty complicated.
I found tcode KO08 but i do not really know how to use it. Maybe there is another tcode that i am not aware of?
I would appreciate any suggestions!
Thnx, UK

Hi Srilakshimi,
If you are familiar with MASS transaction, then you can modify User Responsible field for Internal Orders from transaction KOK2.
As first step you must create a selection variant in order to define which orders you want to modify. Once selection variant was created, excute transaction with it and you'll get a screen similar to MASS transaction. Select the field you want and massively replace it. Do not forget to save.
Best Regards!
Mgitur

Compensation management & Enterprise Compensation Management

Hi Experts,
My client is planning to go for Compensation Management module.
Now with Talent Management EHP-6/7 Compensation is falling under Talent Management which is a built in functionality.
Client does not have any Compensation Management in Play.
They have only 2 components of:
Incentive given to emplopyee per year,Bonus per year & salary survey, in this situation which would be a better solution to follwo.
My question here is whether we should go for conventional Compensation managent or Enterprise Compensation Management.
Plz guide.

Yury thanks for the info,
Can i use the infotypes
LTI grant: LTI Grant Infotype (0761)
Eligibility Override Infotype (0760)
I think these used be in Comp.Mgmt
& client doesnt have any budgeting,how to
by pass that.
plz guide.

ECM(Enterprise Compensation Management) Issue

Hi to all Guruu2019s,
I did configuration for ECM (Enterprise Compensation Management),
1) I have created the budget unit for one particular org unit with the help of PECM_GENERATE_BUDGET and allotted the amount to the corresponding budget unit for the budget type STOCK (ECM) (LBUD) for the stock unit RSTK (REST.UNIT)
2) Next i am running PECM_CHK_BUDGET to check and release the budget, I have released the budget.
3) Last step I am running PECM_CREATE_COMP_PRO to create the compensation process records but I am getting an error message that:u201D conversion of stock unit RSTK to stock unitu201D.
Please suggest me how I can rectify this error and is there any reports which I have to run??
Please help me to correct this issue
Thanks & Regards
Manisha
Edited by: Manisha Todapalli on Nov 5, 2008 11:01 AM

Hi,
You need to execute report RHECM_CONV_BUDGET.
Cheers,
DF

Query in Enterprise Compensation Management and Budgetting

Dear All,
I am working on a new project on Enterprise Compensation Management and Manpower Budgetting. I have some doubts in this area as given below:
1. Can I do a manpower budgetting for the future as to if there is an additional requirement of manpower in some department, can I take the requirement and perform manpower budgetting.
2. Can the budgetting made in HR be used for budgetting in FI.
3. Is budgetting in HR intergrated with FI or CO.
These requirements are becasuse in our organisation, the finance department want to create a budget for 2012 in which they want the manpower cost to be included for 2012.
Please let me know if this can be done through SAP PCP and prove me some links where in I can get some document like PPT or configuration document with which I can do the same.
Expecting a reply and thanks in Advance.
Regards,
Vijay.

Dear All,
Please let me know if anyone has a solution for the above mentioned issues.
Regards,
Vijay

Enterprise Compensation Management (ECM) Info Request

I apologize for this elementary question, but can someone point me to a link on how to setup ECM - both on the portal side and the abap side if applicable? I have scoured the web and can find lots of information on what ECM is and how to use it, but I can't find any technical information. Is it an sca file that I need to download or is it a switch I need to turn on? Any information at this point would be helpful.
Thanks in advance.

Hi,
For any technical details or configurational details of ECM you should go through following documentations
1) K86: Enterprise Compensation Management
Business Process Procedure
and
Enterprise Compensation Management (K11)
Building Block Configuration Guide
Both these documents will help you alot in understanding ECM
Regards
Rao Imran

How to activate Enterprise Compensation Management

Hi
I am trying to activate ECM . I am on ECC5.0 on support pack
SAP_HR 500 0028 SAPKE50028 Human Resources HR Support Package
I activated table T77S0 and the entry HRECM ECMO abd put the value X . But i still not see the ECm activated in IMG.
What extra needs to be done.

Did you activate ECM in IMG? ie Activate Enterprise Compensation Management under the section Global Settings of the IMG ( SPRO) .
~Suresh
The entry in T77S0 should be 'X' for ECMON, but you mentioned ECMO was that a typo?
Message was edited by:
Suresh Datti

Budget functionality in MSS ECM, Enterprise Compensation Management

Hi,
Is there anyone who was able to use and setup the budget functionality from Enterprise Compensation Management in MSS.
We followed all the configuration guides on ECM and were not able to view (and or use) any Budget iviews in MSS related to ECM.
(PS. There are no ECM budget iViews at all.)
Here we use ECM in the SAP Enterprise Portal 6.0 with MSS business package 60.1 and backend SAP HR 4.7 on SAP WAS 6.20.
Please let me know how you did this.
Many thanks.
Ramon Spaan

Hello Ramon
Could u tell me what are the settings you had ready in place before you started the config for CM.
I know we need the PA,PSA,EG,ESG for determining the eligibility. Apart from that , what about any other settings or info we need from the users in particular ? IS there a standard list ?
Would we need any infotypes to be populated prior ?
Since MSS would use ECM and we are config on 4.7 vrsion2, do I take into account infotypes such as 0759 and 0758 in addition to 0381 for the settings ?

Enterprise Compensation Management - configuration in production

Hello.
I'm new working with ECM and I have requirements to allow a compensation manager to edit the matrix guidelines values ( e.g. from a transaction). This is supposed to happen in production instead of someone editing it in dev and then moving to the quality and production.
Everything else I will do the configuraton in dev and move to production, but the percentages should be done by several managers to several different matrix.
I know this may not be the best approach but it's a requirement and I'm not sure the best way to deal with it.
What do you suggest I could do to edit these values on a production environment? Should I create my own tables and then read it directly from a BADI or is there a way to edit the customization and reuse standard SAP?
Thanks for all your feedback.
Regards,
Pedro

We have the same problem.
We are maintaining rating guideline matrix in a custom table and reading this custom table in guideline badi.
In otherwords, we are not using SAP config table to store rating guideline.
A tcode was assigned to maintain the table in production directly.
Raghu Kolukuluri

Review period and Selection period in Enterprise Compensation Management

Dear all,
Anybody can explain about review period and selection period???
Theory says u2026
Review period
The period when manager can plan and submit recommendations through MSS
Selection period
The period which system retrieves the set of objects (Org units, positions and employees) for compensation on portal.
But I am bit confused with thisu2026 when this review will happen? In the beginning?
Say example
If itu2019s a merit increment and 01.01.2011-31.12.2011 is the valuation periodu2026 and we will give the increment in effective 01.01.2012 .Then when it be will the review period and when it will be the selection period?
Anybody can explain with examples plsu2026.
Thanks and Regards
Richard

Hi Richard,
You supplied the correct definitions, but your explanation is not correct.
The Review Period is that period of time the manager can access the system to enter the recommendation for a pay change. In your example it might be 12/15 to 12/31. Only during this period will the review be available for entry. The 1/1 effective date is set in the Item attributes.
The Selection Period indicates for which employees the manager can make recommendations. For example, if a person is transferred on December 20th in the above scenario - you would want the first manager to still create the recommendation and the individual not to appear for the new manager. Thus, you would put 12/15 as the beginning and ending date for the Selection period. Each manager would then see his/her direct reports as of that date in the recommendation area. If you put 1/1/ to 12/31 in this field, any manager of the individual during the year could see and make entries in the recommendation area for the employee.
Hope these examples help.
Paul

SAP ERP 6.0 Enterprise Compensation Management-Salary structure adjustment

Using the sap portal functionality, for the Salary survey and benchmarking -> Salary strucuture adjustment, the portal displays the folllowing situation:
- tab current salary structure : the values are correctly filled automatically using the related back end configuration table
- tab market data = the system displays "market minimum"= "market average" = "market maximum", once selected the composite result to be used
- tab planned salary structure : once click on "Create from market data", the system displays "planned minimum" = "planned reference" = "planned maximum" as consequence of what uploaded in tab "market data".
someone can help me to understand why the market minimum = market maximum = market average, because the uploaded survey job catalogues and survey market have minumum not equal to average not equal to maximum.
Many Thanks
Leandro

Hi Kevin,
As you noted the IT0759 is created, but this is actually good history! How could you refute an employee who says "My boss said I was getting a Special Adjustment and it is not on my paycheck!". You want that "$0.00" record in the IT0759. You do not want any change to IT0008 or IT0015 if there is no adjustment entered and none is created upon activation. But you do want the IT0759 for proof as to what the manager did enter - no increase.
We have used ECM for the past two years. We maintain the IT0759 as history and also have three types of increases - Merit, Market and Lump Sum. Most people will get a merit, some a market adjustment and a few a lump sum amount or they may receive more than one. But even if no entry is made, we want to make sure the manager has "Submitted" the $0.00 record. This way we can verify the manager has consider each employee - $0.00 can be a valid amount if no increase is given! Also, this is referenced when you do a history view of the employee's salary in ECM. Thus, the $0.00 amount record is a valid record and should be maintained.
Paul

Enterprise Compensation Management - Mass date change of IT 0759

Similar Messages

Maybe you are looking for