Enterprise Manager 9i - Download

I am not able to download Enterprise Manager 9i for Windows.
I found tha page:
http://otn.oracle.com/products/oem/oem9i_index.html
and there is a link to download the product I need but if I am following the link the result is: "Page not found".
Could you please help me in this matter?
Best regards,
Przemyslaw Czaplinski

How about this link:
http://otn.oracle.com/software/products/ias/devuse_9ias_r2.html
and there some packages just pick up a smaller one. Seems no links for sole EM 9i for Win download. Sites like this sometimes confuses people. Good luck!
Harry L

Similar Messages

  • Enterprise Manager 9i download links are broken

    Hi OTN,
    Could you fix the links to download Oracle Enterprise Manager 9i? I'm getting a 404 page not found error, and the suggestions for alternative search areas all take me back to the page with the broken links. Thank you.
    Lynne Ray

    How about this link:
    http://otn.oracle.com/software/products/ias/devuse_9ias_r2.html
    and there some packages just pick up a smaller one. Seems no links for sole EM 9i for Win download. Sites like this sometimes confuses people. Good luck!
    Harry L

  • Enterprise Manager Console missing

    I have installed the oracle software 10.2.0 ,I have got all the components like database and all installed but i could not find the enterprise manager console part installed.
    As some of viewers suggested me that OEMC comes out to be online..
    But i want to use it or want to install it on my machine...as i have been using oracle10g home1 and oracle client10g home 1 which included the OEMC....is there any link by which i can install it on my machine instead of online.
    please help me as an novice user in installing oracle.
    Thank you all...thanks for your time.

    Check the below documents are of help in solving your problem:-
    Starting and Stopping the Oracle Enterprise Manager Console
    http://download-east.oracle.com/docs/cd/B16240_01/doc/server.102/b14196/em_manage002.htm#sthref145
    Accessing the Oracle Enterprise Manager Database Control
    http://download-east.oracle.com/docs/cd/B16240_01/doc/server.102/b14196/em_manage003.htm#sthref146
    Getting Started with Oracle Enterprise Manager
    http://download-east.oracle.com/docs/cd/B16240_01/doc/server.102/b14196/em_manage.htm#sthref126
    Oracle® Database 2 Day DBA 10g Release 2 (10.2)
    http://download-east.oracle.com/docs/cd/B16240_01/doc/server.102/b14196/toc.htm
    Oracle Enterprise Manager Grid Control Quick Installation Guide for Windows (32-bit)
    http://download-east.oracle.com/docs/cd/B16240_01/doc/install.102/b31288/toc.htm
    Oracle Enterprise Manager 10g Release 2 (10.2) - Documentation Library
    http://download-east.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

  • Download oracle 10G Enterprise Manager

    I would like to download complete Oracle 10G Enterprise Manager. I downloaded one from oracle.com downloads and somehow it is not a complete. In that i do not have Console.
    Where i can i download a complete 10G Enterprise Manager?

    Which "console" are you referring to?
    To download complete OEM is a non-existing concept. OEM is many, many products. You have Grid Control console, DB Control console, AS Control console.... and ta-da the java client console (old style) - as mentioned above install it from 10g Client software cd.

  • Disk 1 of Enterprise Manager 11g Grid Control not downloading correctly

    Hello, I'm downloading Enterprise Manager 11g Grid Control.
    The first disk, of three, does not download correctly:
    GridControl_11.1.0.1.0_Linux_1of3.zip
    On the web page, its size is listed to be around 1.3 GB.
    However, when downloading, it thinks its actual file size is only around 643 MB.
    So only that much gets downloaded.
    But after downloading, this .zip file cannot be opened, it does not appear to a valid .zip file.
    Please investigate and fix this.
    Thanks
    Eugene

    Please check from edelivery.oracle.com . You need to unzip all the zips under one dir.

  • Error loading Management Modules of Enterprise Manager 8.2.3.5

    Hi all,
    actually we have installed the Wily Enterprise Manager 8.2.3.5 on Linux x64.
    Starting the manager we get the following errors in the IntroscopeEnterpriseManager.log
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "MSFT .NET - Duet"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP J2EE - Duet"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP J2EE - NetWeaver PI(XI)"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP Navigation"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP Host"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP Business Objects"
    2/23/11 03:41:10 PM CET [ERROR] [Manager]
    2/23/11 03:41:10 PM CET [ERROR] [Manager]
    2/23/11 03:41:10 PM CET [ERROR] [Manager]
    2/23/11 03:41:13 PM CET [ERROR] [Manager]
    The error indicates a problem during the load of the Management Modules.
    Also we observed problems calling dashboards from the Console in the wily Introscope Webview.
    For e.g. the dashboard J2EE CPU and memory Detail
    Calling this dashbord ends in the following error:
    An error occurred fetching this dashboard from the Enterprise Manager: null
    What could be the problem for the errors during the Management Modul load ?
    Thanks in advance for your help.
    Kind regards
    Anton

    Hello Anton,
    Please download the SAP Management Modules from the marketplace.
    Check note 797147 and note  1579474 about Management Modules usage.
    Best regards,
    Guilherme Balbinot

  • Enterprise Manager is not able to connect to the database instance....

    Hi all,
    Currently i'm facing a big issue here.
    I have install the Oracle 10g on Window 2003 SE.
    And currently the Enterprise manager is not be able to conenct to the database and my database is still running.With my listener is up.
    But from the Enterprise manager's it show that everythg is down.
    and when i try to restart it,i ask for os id and password and dbuser and dbpassword.
    frm the SQL plus,i can easily startup and shutdown the database.
    So i would like to know i can rectify this problem.
    please kindly help me.I have post the setting of the databse as below
    tnsnames.ora
    ==========
    # Filename......: tnsnames.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
    SDB.WORLD=
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = SAP_SOLMAN)
    (PORT = 1527)
    (CONNECT_DATA =
    (SID = SDB)
    (GLOBAL_NAME = SDB.WORLD)
    sqlnet.ora
    ========
    # sqlnet.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\sqlnet.ora
    # Generated by Oracle configuration tools.
    # 05.01.06 set to default
    #TCP.NODELAY=YES
    # 05.01.06 set to 32768
    # 05.01.06 unsorported parameter now
    #NAME.DEFAULT_ZONE = WORLD
    # 05.01.06 set the default to 10
    # Filename......: sqlnet.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT, HOSTNAME, LDAP)
    NAMES.DEFAULT_DOMAIN = WORLD
    DEFAULT_SDU_SIZE = 32768
    SQLNET.EXPIRE_TIME = 10
    Listener.ora
    =========
    # Filename......: listener.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = SDB.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = SDB)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = SAP_SOLMAN)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = SDB)
    (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
    Listener status
    ===========
    LSNRCTL> status
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=SDB.WORLD))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 15-AUG-2006 15:14:48
    Uptime 0 days 2 hr. 43 min. 31 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File E:\oracle\product\10.2.0\db_1\network\admin\listener.o
    ra
    Listener Log File E:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDB.WORLDipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDBipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAP_solman)(PORT=1527)))
    Services Summary...
    Service "SDB" has 1 instance(s).
    Instance "SDB", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    emoms.log
    ========
    2006-08-15 18:03:20,562 [HttpRequestHandler-2254042] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
         at oracle.sysman.emdrep.receiver.OMSHandshake.getParameterFromDB(OMSHandshake.java:387)
         at oracle.sysman.emdrep.receiver.OMSHandshake.getMaxAgentCompatVer(OMSHandshake.java:369)
         at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:794)
         at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:648)
         at oracle.sysman.emdrep.receiver.FxferRecv.doGet(FxferRecv.java:658)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake getParameterFromDB.402 - Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://SAP_solman:3938/emd/main)(ERROR = INTERNAL_ERROR)
    2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:368)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:395)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:144)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2006-08-15 18:03:36,531 [HttpRequestHandler-9249408] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:36,531 [EMUI_18_03_36_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
    java.lang.IllegalStateException: Response has already been committed
         at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
         at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
         at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
         at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
         at oracle.sysman.eml.app.Console.doGet(Console.java:135)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    OracleDBConsoleSDBsrvc.log
    ======================
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/09/06 15:11:59 Start pending...
    08/09/06 15:11:59 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/09/06 15:12:04 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/09/06 15:12:04 Tracking process launch...
    08/09/06 15:12:41 Received exitCode 3 from emctl istatus
    08/09/06 15:12:41 dbconsole started
    08/11/06 08:46:03 Recieved ServCtrlHdlr command, 5
    08/11/06 08:46:03 Stopping dbconsole
    08/11/06 08:46:03 Launching stop EMD process...
    08/11/06 08:46:03 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 08:46:06 Stop process has exited with exitCode: 0
    08/11/06 08:46:06 Waiting for emwd process to exit. numRetries=74
    08/11/06 08:46:06 Watchdog process exited with exit code 15
    08/11/06 08:46:06 Signal Shutdown event.
    08/11/06 08:46:06 Shutdown thread exited.
    08/11/06 08:46:06 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 08:45:17 Start pending...
    08/11/06 08:45:17 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 08:45:26 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 08:45:26 Tracking process launch...
    08/11/06 08:46:11 Received exitCode 3 from emctl istatus
    08/11/06 08:46:11 dbconsole started
    08/11/06 08:48:58 Recieved ServCtrlHdlr command, 5
    08/11/06 08:48:58 Stopping dbconsole
    08/11/06 08:48:58 Launching stop EMD process...
    08/11/06 08:48:58 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 08:49:02 Stop process has exited with exitCode: 0
    08/11/06 08:49:02 Waiting for emwd process to exit. numRetries=74
    08/11/06 08:49:02 Watchdog process exited with exit code 15
    08/11/06 08:49:02 Signal Shutdown event.
    08/11/06 08:49:02 Shutdown thread exited.
    08/11/06 08:49:02 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 08:53:20 Start pending...
    08/11/06 08:53:20 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 08:53:29 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 08:53:29 Tracking process launch...
    08/11/06 08:54:14 Received exitCode 3 from emctl istatus
    08/11/06 08:54:14 dbconsole started
    08/11/06 11:37:30 Recieved ServCtrlHdlr command, 5
    08/11/06 11:37:30 Stopping dbconsole
    08/11/06 11:37:30 Launching stop EMD process...
    08/11/06 11:37:30 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 11:37:34 Stop process has exited with exitCode: 0
    08/11/06 11:37:34 Waiting for emwd process to exit. numRetries=74
    08/11/06 11:37:34 Watchdog process exited with exit code 15
    08/11/06 11:37:34 Signal Shutdown event.
    08/11/06 11:37:34 Shutdown thread exited.
    08/11/06 11:37:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 11:36:48 Start pending...
    08/11/06 11:36:48 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 11:36:56 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 11:36:56 Tracking process launch...
    08/11/06 11:37:41 Received exitCode 3 from emctl istatus
    08/11/06 11:37:41 dbconsole started
    08/15/06 09:31:52 Recieved ServCtrlHdlr command, 5
    08/15/06 09:31:52 Stopping dbconsole
    08/15/06 09:31:52 Launching stop EMD process...
    08/15/06 09:31:52 Waiting for stop EMD process to exit. numRetries=74
    08/15/06 09:31:56 Stop process has exited with exitCode: 0
    08/15/06 09:31:56 Waiting for emwd process to exit. numRetries=74
    08/15/06 09:31:56 Watchdog process exited with exit code 15
    08/15/06 09:31:56 Signal Shutdown event.
    08/15/06 09:31:56 Shutdown thread exited.
    08/15/06 09:31:56 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/15/06 09:31:06 Start pending...
    08/15/06 09:31:06 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/15/06 09:31:14 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/15/06 09:31:14 Tracking process launch...
    08/15/06 09:31:49 Did not hear back from emctl istatus.
    08/15/06 09:31:49 Waiting a further 5 secs...
    08/15/06 09:31:51 Received exitCode 3 from emctl istatus
    08/15/06 09:31:51 dbconsole started
    08/15/06 15:15:31 Recieved ServCtrlHdlr command, 5
    08/15/06 15:15:31 Stopping dbconsole
    08/15/06 15:15:31 Launching stop EMD process...
    08/15/06 15:15:31 Waiting for stop EMD process to exit. numRetries=74
    08/15/06 15:15:34 Stop process has exited with exitCode: 0
    08/15/06 15:15:34 Waiting for emwd process to exit. numRetries=74
    08/15/06 15:15:34 Watchdog process exited with exit code 15
    08/15/06 15:15:34 Signal Shutdown event.
    08/15/06 15:15:34 Shutdown thread exited.
    08/15/06 15:15:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/15/06 15:14:46 Start pending...
    08/15/06 15:14:46 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/15/06 15:14:54 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/15/06 15:14:54 Tracking process launch...
    08/15/06 15:15:29 Did not hear back from emctl istatus.
    08/15/06 15:15:29 Waiting a further 5 secs...
    08/15/06 15:15:32 Received exitCode 3 from emctl istatus
    08/15/06 15:15:32 dbconsole started
    Command prompt for emctls status
    =========================
    E:\oracle\product\10.2.0\db_1\BIN>emctl status
    Environment variable ORACLE_SID not defined. Please define it.
    emd.properties
    ===========
    # perl executable directory
    perlBin=E:\oracle\product\10.2.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread
    # script directory
    scriptsDir=E:\oracle\product\10.2.0\db_1/sysman/admin/scripts
    # emd Root directory(read-only location). Metrics should not create files
    # under this directory
    emdRoot=E:\oracle\product\10.2.0\db_1
    # agent Root directory(writeable).
    # Use this property to base any temporary file creation.
    agentStateDir=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB
    # Chronos root directory
    chronosRoot=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/emd/chronos
    # OMS Upload URL
    # if there is no receiving OMS or if you wish to disable the UploadManager
    # please set this value to empty or comment out below line
    REPOSITORY_URL=http://SAP_solman:5500/em/upload/
    # Proxy settings used for fetchlets. not applicable for uploader.
    #proxyHost=www-proxy.us.oracle.com
    #proxyPort=80
    #dontProxyFor=.us.oracle.com
    # If it is necessary to go through an http proxy server to get to the
    # repository, uncomment the following two lines
    #REPOSITORY_PROXYHOST=
    #REPOSITORY_PROXYPORT=
    #REPOSITORY_PROXYREALM=%EM_REPOS_PROXYREALM%
    #REPOSITORY_PROXYUSER=%EM_REPOS_PROXYUSER%
    #REPOSITORY_PROXYPWD=%EM_REPOS_PROXYPWD%
    # This string is used by the agent to connect to remote targets
    # ***IMPORTANT*** Do not change the contents of this setting. Only the
    # install should modify this value.
    agentSeed=1329576760
    # This string is used by the agent to determine which algorithm to use for encrypted data
    # The string value will be same as the release version
    agentVersion=10.1.0.4.0
    # How long, in minutes, collector will wait until next load.
    UploadInterval=5
    # If an upload fails, we want to backoff by UploadFailBackoff
    # percentage more each time for each successive upload failure
    # e.g. if we start the retry at 1 minute. If we fail in our next
    # upload attempt, we try again 1minute 12 seconds later etc.
    UploadFailBackoffPct= 20
    # Maximum amount of time, in seconds, upload will wait for response from
    # repository before timing out.
    # 0 means infinite.
    UploadTimeout=1800
    # Timeout for upload a file, HealthMonitor will abort the EMD process if
    # UploadManager does not finish uploading one file within this time
    # Unit is minite, the default value is 1 hour ( 15 Min)
    #UploadMaxTime=15
    # How big the file the collector will upload (in KB)
    # the actual file size could be slightly bigger.
    # This is only a guidance.
    UploadFileSize=2048
    # The maximum number of megabytes(MB) the upload manager will support in the
    # upload directory before temporarily being disabled
    UploadMaxBytesXML=50
    # The maximum number of files the upload manager will support in the
    # upload directory before temporarily being disabled
    UploadMaxNumberXML=5000
    # The maximum amount (%) of disk space that can be used on the EMD filesystem
    # before the following is disabled:
    # - Collection of data (upload manager)
    # - Logging and tracing
    UploadMaxDiskUsedPct=98
    # The amount (%) of disk space that can be used on the EMD filesystem
    # before the following is re-enabled after being disabled previously:
    # - Collection of data (upload manager)
    # - Logging and tracing
    UploadMaxDiskUsedPctFloor=95
    # Time out for the Agent to think that the access to the database could be
    # hung. The Agent would not allow more threads to go and hang with a database
    # if any one access to the database does not return within DbHangTimeout
    # seconds.
    # The more the timeout more the possibility of allowing more threads
    # to be hung in the EMD with a bad database.it is specified in seconds.
    #DbHangTimeout=200
    # The script to run if disk space usage exceeds parameters or if certain other
    # error conditions occur.
    #emdFailureScript=emdfail.command
    # The location of the file that contains the root certificate.
    emdRootCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64LocalCertificate.txt
    internetCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64InternetCertificate.txt
    # The download URL for the EMD Oracle Wallet and its local file location.
    # Note: Ensure that this URL references a valid port number at which the
    # console is available on http
    emdWalletSrcUrl=http://SAP_solman:5500/em/wallets/emd
    emdWalletDest=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/server
    # The email address for out-of-band notifications
    emd_email_address=
    emd_email_gateway=
    # The return email address for out-of-band notifications
    emd_from_email_address=
    # EMD main servlet URL
    EMD_URL=http://SAP_solman:3938/emd/main
    # Whether the EMD should listen on all NICs on the current host (the default)
    # or just the NIC associated with the hostname in EMD_URL
    AgentListenOnAllNICs=TRUE
    # This parameter indicates the thread model to use. uncomment one of the
    # following ThreadPoolModel line to indicate the model, agent need to use.
    # SMALL if number of targets is less than 11.
    # MEDIUM if number of targets is from 11 to 50.
    # LARGE if number of targets is greater than 50.
    # This parameter can be overriden by 'MaxThreads' which indicates the maximum
    # number of threads that CEMD can have running at any point of time. User can
    # mostly use the other parameter ThreadPoolModel to indicate what model for the
    # agent to use.
    # ThreadPoolModel = SMALL
    # ThreadPoolModel = MEDIUM
    # ThreadPoolModel = LARGE
    # This parameter indicates the stack size, threads have to be created with.
    # we can set it to 0 to use the OS default value.
    # In some version of solaris(such as 2.9 ) specify a stack size may cause Java Hotspot warning
    # when JVM is used.
    NormalThreadStackSize=0
    #Signals that users want to ignore.
    #It can be one or combination of SIGTERM, SIGINT
    # The signals can listed with ',' as delimiter.
    #IgnoreSignals=
    # This property is NO LONGER USED for host config collection (instead, hostConfigClasspath is used).
    # If noone else uses it, it can be removed.
    ouiLoc=E:\oracle\product\10.2.0\db_1/oui
    # Classpath for host config collection
    # VERY IMPORTANT NOTE: If you change the host config classpath entries in this section, you HAVE
    # to change the HOST_CONFIG_TEST_CLASSPATH entry in the utl/emdwqaenv file too.
    # NOTE: if the location of emd_java.jar and/or log4j-core.jar is changed
    # make sure that appropriate changes are also made
    # to the CLASSPATH variable in this file if necessary
    # PORTING NOTE: Check OUI-required jar files for OUI APIs to work. They could be different on your platform.
    # Also, our version of xmlparserv2.jar must be compatible with the one OUI expects (both OUI and ECM use XML parser).
    hostConfigClasspath=E:\oracle\product\10.2.0\db_1/oui/jlib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/OraInstaller.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/srvm.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/share.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar
    # JAVA HOME required for JavaExt metric calls
    JAVA_HOME=E:\oracle\product\10.2.0\db_1/jdk/jre
    # CLASSPATH required for JavaExt metric calls
    CLASSPATH=E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/ons.jar;E:\oracle\product\10.2.0\db_1/lib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar;E:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/lib/http_client.jar;E:\oracle\product\10.2.0\db_1/lib/dms.jar;E:\oracle\product\10.2.0\db_1/lib/dmsEmd.jar;E:\oracle\product\10.2.0\db_1/jlib/share.jar;E:\oracle\product\10.2.0\db_1/jdbc/lib/ojdbc14dms.jar;E:\oracle\product\10.2.0\db_1/jlib/jssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/javax-ssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/lib/em_test.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/jlib/repository.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/optic.jar
    # this is the java option
    #JAVA_OPTIONS=-Xmx128m
    # These are the optional Java flags for the in-process Java
    # Native Interface (JNI)
    agentJavaDefines=-Doracle.dms.refresh.wait.time=1000 -DUrlTiming.UseJSSE=true
    # When set to true, the emd.log and emd.trc file will be appended by a pid
    # For example:
    # emd_15789.log
    # emd_15789.trc
    # By default, it is not set for regression test purpose.
    # After installed, please uncomment this line because when EMD is restarted,
    # previous log information will be lost if not set to true.
    #LogFileWithPID=true
    # Default log file maximum size before rolling in Kilobytes
    LogFileMaxSize=4096
    # Maximum number of log file roll files to maintain before deletion
    LogFileMaxRolls=4
    # Default trace file maximum size before rolling in Kilobytes
    TrcFileMaxSize=4096
    # Maximum number of trace file roll files to maintain before deletion
    TrcFileMaxRolls=4
    # To enable the metric browser, uncomment the following line
    # This is a reloadable parameter
    #enableMetricBrowser=true
    # To disable Remote operations (non-reachable agent) uncomment the following
    # line:
    #disableRemoteOperations=true
    # add an additional admin path from which the agent will read additional
    # target metadata. The specified path should have the mandatory 4 directories
    # under it. 1. metadata 2. scripts 3. default_collection 4. discover
    #altAdminPath=<additional admin path>
    # The health monitor executes callbacks in a separate thread. if for some
    # reason the threads spawned from health monitor to execute callbacks are
    # hung, the agent could run out of resource and freeze.
    # so when the current thread count spawned from the Health monitor reaches
    # this limit, the agent is bounced. the default is set to 5.
    #MaxHealthMonitorThreads=5
    # dynamicPropsComputeTimeout default to 30s
    dynamicPropsComputeTimeout=60
    # emagent perl tracing levels
    # supported levels: DEBUG, INFO, WARN, ERROR
    # default level is ERROR
    EMAGENT_PERL_TRACE_LEVEL=ERROR
    # other optional parameters for perl tracing
    # EMAGENT_PERL_TRACE_DIR default to $ORACLE_HOME/sysman/log
    #EMAGENT_PERL_TRACE_DIR=
    # EMAGENT_PERL_TRACE_FILESIZE default to 5M
    #EMAGENT_PERL_TRACE_FILESIZE=5
    # this section define the logging level for each component,
    # it is "reloadable", you can change the level at runtime to reset
    # the logging level, but if you remove the line, it will not be
    # changed.
    tracelevel.main=WARN
    tracelevel.emSDK.xml=WARN
    tracelevel.emSDK.utl=WARN
    tracelevel.ResMonitor=WARN
    tracelevel.Dispatcher=WARN
    tracelevel.ThreadPool=WARN
    tracelevel.pingManager=WARN
    tracelevel.collector=WARN
    tracelevel.http=WARN
    tracelevel.ssl=WARN
    tracelevel.ssl.io=WARN
    tracelevel.blackouts=WARN
    tracelevel.upload=WARN
    tracelevel.command=WARN
    tracelevel.reload=WARN
    tracelevel.scheduler=WARN
    tracelevel.Authentication=WARN
    tracelevel.metadata=WARN
    tracelevel.targets=WARN
    tracelevel.TargetManager=WARN
    tracelevel.engine=WARN
    tracelevel.javaproc=WARN
    tracelevel.vpxoci=WARN
    tracelevel.javavm=WARN
    tracelevel.fetchlets=WARN
    tracelevel.fetchlets.os=WARN
    tracelevel.fetchlets.osline=WARN
    tracelevel.fetchlets.oslinetok=WARN
    tracelevel.fetchlets.UDM=WARN
    tracelevel.fetchlets.sql=WARN
    tracelevel.fetchlets.url=WARN
    tracelevel.fetchlets.urllines=WARN
    tracelevel.fetchlets.urllinetoken=WARN
    tracelevel.fetchlets.URLTiming=WARN
    tracelevel.fetchlets.propEcho=WARN
    tracelevel.fetchlets.readFromFile=WARN
    tracelevel.fetchlets.readMultFromFile=WARN
    tracelevel.fetchlets.throwable=WARN
    tracelevel.fetchlets.resourceGrab=WARN
    tracelevel.fetchlets.emSDK=WARN
    # The following three properties are for HTTP timeout
    # Timeout value for reading Http primary header, default is 30 seconds.
    httpTimeoutPrimaryHeader=30
    # Timeout value for reading http secondary headers, default is 30 seconds
    httpTimeoutSecondaryHeaders=30
    # Timeout value for reading http body, default is 60 seconds.
    httpTimeoutBody=60
    omsRecvDir=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\sysman\recv
    agentTZRegion=+08:00
    And i would like to know how to set up the environment variable for Oracle_HOME and ORACLE_SID.
    Please kindly assist me on this.

    Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
    emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
    As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
    -Ramesh

  • How do I create a new emkey for Enterprise Manager Database Control?

    Hi,
    I just installed 11gR2.
    I am evaluating it.
    How do I create a new emkey for Enterprise Manager Database Control?
    I tried various combinations of this command:
    emctl config emkey
    I did find a probable bug:
    $ emctl config emkey -emkey -emkeyfile emkey.ora -force -sysman_pwd he11ow0rld
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
    Undefined subroutine &EmKeyCmds::promptUserPasswd called at /u2/app/oracle/product/11.2.0/dbhome_1/bin/EmKeyCmds.pm line 160, <FILE> line 3.
    $
    Again,
    How do I create a new emkey for Enterprise Manager Database Control?
    I do have a copy of my old key but it is no longer good because I reinstalled the repository with these commands:
    emca -repos drop ...
    emca -repos create ...
    Oh, and where is emctl "documented".
    I poked around in some book-index links and with the search engine.
    I could not find anything.
    Thanks,
    -Janis

    user11892726 wrote:
    Oh, and where is emctl "documented".
    http://download.oracle.com/docs/cd/B16240_01/welcome.html

  • LogMiner Viewer in the Enterprise Manager 10g ??

    Does somebody know if there is LogMiner Viewer in the Enterprise Manager 10g?
    How could I do to work with this tool ?
    Thanks

    There is a 10g style. It comes with the client software. It is very much a stripped down version. I downloaded it and installed it. I could not find Logminer viewer in it. I did find some documentation. Here is what it says.
    Launching LogMiner Viewer
    To launch LogMiner Viewer, take the following steps:
    Invoke LogMiner Viewer: On UNIX platforms, enter:oemapp lmviewer
    The command string is case-sensitive and must be entered with lowercase characters.
    On Windows NT, from the Programs menu,
    choose Oracle_home > Database Administration > LogMiner Viewer.
    After you invoke LogMiner Viewer,the Login dialog box is displayed.
    Select Launch standalone.
    Now, you can connect to a standalone Oracle Enterprise Manager repository.
    If you do not have a standalone repository or if LogMiner Viewer is not aware
    of an existing standalone repository, you cannot save queries.
    When you attempt to expand a database or save a query, LogMiner Viewer displays
    an informational message and leads you through a dialog to connect to or to create
    a repository. See Connecting to or Creating a Standalone Repository for more information.
    Click OK.

  • Enterprise manager for 11g

    I have installed Oracle Enterprise Database 11g on a Windows 2003 Server. I have been going through some documentation and it sometimes refers to tabs and features that I cannot find in EM. I have since found out that the default install does not come with the 'Full' EM. The only one i seem to be able to find, download and install is for 10g.
    Also, I want to install this on a Client Machine, not the DB Server.
    Is there a full EM for 11g somewhere that I am not finding? All my searches point me back to the 10g EM download Page
    Thanks

    Oracle used to have a client-server Java Enterprise Manager console. Ths was popular and extremely functional in Oracle9i.
    With Oracle 10g, Oracle replaced the client-server console with a 3-tier 'browser based' console. That client-server tool was deprecated but still available on the Client CD. As of 11g that OEM Application was totally removed.
    However, looking at the statement you quote (from page 91):
    "The Oracle Enterprise Manager Central Console is a Web-based interface for managing the entire enterprise from the console. It offers a lot more functionality than the standard Oracle Enterprise Manager that comes with a typical database install."There are a few keywords here: "Central Console" and "managing the entire enterprise" lead me to believe the author is talking about the Grid Control. Similar to the DB Console that comes with the default install of the database, the Grid Control console has the following characteristics:
    - it is centralized (uses a separate computer to host the enterprise-wide OEM repository)
    - it allows monitoring and administration* of all Oracle products and many non-Oracle products
    - it it web-based and indeed, when looking at a database admin page, itr looks a lot like the DB console
    - it can consolidate the monitoring summary info about several products into a single page
    - it has reports and schedule capability not found in the native DB console
    - it places much less load on the db machine than the DB Console
    * in some cases Grid Control simply invokes the admin tool from the product rather than duplicating the product admin capability.

  • Enterprise manager in window 7

    Hi Experts,
    I try to install 10.2.0.3 database in wnidow. It works.
    But I am not able to open EM and shows all components down.
    I try to check and restart EM . It does not work by local admin right.
    emctl status commands does not work in window 7 too.
    Please review all message as below
    Thanks
    Jim
    ===
    Microsoft Windows [Version 6.1.7600]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    C:\Users\jim>cd C:\ORACLE\product\10.2.0\db_1\bin
    C:\ORACLE\product\10.2.0\db_1\bin>set ORACLE_SID=DBA
    C:\ORACLE\product\10.2.0\db_1\bin>emctl status
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    Invalid arguments
    Unknown command option status
    Usage::
    Oracle Enterprise Manager 10g Database Control commands:
    emctl start| stop| status| setpasswd dbconsole
    emctl secure <options>
    emctl set ssl test|off|on em
    emctl set ldap <host> <port> <user dn> <user pwd> <context dn>
    emctl blackout options can be listed by typing "emctl blackout"
    emctl config options can be listed by typing "emctl config"
    emctl secure options can be listed by typing "emctl secure"
    emctl ilint options can be listed by typing "emctl ilint"
    emctl deploy options can be listed by typing "emctl deploy"
    C:\ORACLE\product\10.2.0\db_1\bin>emctl status
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    Invalid arguments
    Unknown command option status
    Usage::
    Oracle Enterprise Manager 10g Database Control commands:
    emctl start| stop| status| setpasswd dbconsole
    emctl secure <options>
    emctl set ssl test|off|on em
    emctl set ldap <host> <port> <user dn> <user pwd> <context dn>
    emctl blackout options can be listed by typing "emctl blackout"
    emctl config options can be listed by typing "emctl config"
    emctl secure options can be listed by typing "emctl secure"
    emctl ilint options can be listed by typing "emctl ilint"
    emctl deploy options can be listed by typing "emctl deploy"
    C:\ORACLE\product\10.2.0\db_1\bin>emctl start dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    http://HQ-xxxxx:1158/em/console/aboutApplication
    Error opening logfile for output in nmeula_new
    Error opening logfile for output in nmeula_new
    Agent Version : 10.1.0.5.1
    OMS Version : 10.1.0.5.0
    Protocol Version : 10.1.0.2.0
    Agent Home : C:\oracle\product\10.2.0\db_1\HQ-xxxxxxxxxx
    BA
    Agent binaries : C:\oracle\product\10.2.0\db_1
    Agent Process ID : 2180
    Agent Process ID : 2180
    Agent URL : http://HQ-xxxxx:3938/emd/main
    Started at : 2010-05-26 11:51:50
    Started by user : SYSTEM
    Last Reload : 2010-05-26 11:51:50
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 17
    Size of XML files pending upload(MB) : 2.43
    Available disk space on upload filesystem : 29.64%
    Agent is already started. Will restart the agent
    Access is denied.
    This will stop the Oracle Enterprise Manager 10g Database Control process. Continue [y/n] :y
    Access is denied.
    C:\ORACLE\product\10.2.0\db_1\bin>

    user589812 wrote:
    Thanks for all help from you. I give up to fix 10GR2.04/4 EM issue in window 7.
    If any expert fix EM issue in WIndow 7, let us know.
    JIm
    Take a look at Metalink Doc ID 952302.1 "Is Microsoft Windows 7 certified to install/run Oracle Database Server/Client?" That document indicates that 10.2.0.5, scheduled to be released in the third quarter of 2010, will support Windows 2008 R2 and Windows 7 - apparently only the Oracle Client will be supported and not Oracle Database.
    Oracle Database 11.2.0.1 will definitely work with Windows 7 (Professional, Ultimate, and Enterprise), Oracle Database 11.1.0.7 will probably work with Windows 7, Oracle Database 10.2.0.4 and below will not be certified on Windows 7 and very likely will not work properly. If you have Windows 7 Professional or higher, you might be able to run Oracle 10.2.0.4 in Microsoft's free Windows XP emulator:
    http://www.microsoft.com/windows/virtual-pc/download.aspx
    If you have Windows 7 Starter or Windows 7 Home Premium, it is possible to upgrade to either Windows 7 Professional or Windows 7 Ultimate using the Microsoft Windows Anytime Upgrade program that is built into Windows 7.
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • The Next Generation of Oracle Enterprise Manager Will Arrive in 7 Days!

    Seven more days to go before we launch Oracle Enterprise Manager 11g.
    We invite you to join us for this exciting announcement. You may attend the event in person if you are going to be in New York City next Thursday (4/22) or over the web via our webcast. We will also be hosting a live simulcast event at the Collaborate conference in Las Vegas.
    Click the links below to learn more about event agenda and to register.
    Register for the live event in New York City at http://www.oracle.com/webapps/events/EventsDetail.jsp?p_eventId=110025&src=6773871&src=6773871&Act=24
    Register for the webcast at http://www.oracle.com/webapps/events/EventsDetail.jsp?p_eventId=110011&src=6773871&src=6773871&Act=44
    The simulcast event at Collaborate will be held in Palm B room on Level 3 of Mandalay Bay Convention Center starting at 9:45 a.m. local time.
    Visit http://blogs.oracle.com/oem for more information about the new release starting a week from now.

    Still you may refer this link. The documents have been already updated. and some upgrade process are interpreted.
    http://download.oracle.com/docs/cd/E11081_01/welcome.html
    Oracle VM Server upgrade:
    http://download.oracle.com/docs/cd/E11081_01/doc/doc.21/e10899/e10899_02.htm#CIHBCHII
    Oracle VM Manager upgrade:
    http://download.oracle.com/docs/cd/E11081_01/doc/doc.21/e10902/e10902_02.htm#BHCDJGJJ

  • Enterprise manager version with Oracle 11g

    Which version of Enterprise Manager do I need to install with 64 bit Oracle 11g. What is the latest version? Where can I get this information. The latest version that I could find for download on Oracle website is 10.2.0.4, but the one that comes with 11g Enterprise edition says 11.1 (the one without the Grid control).

    The latest grid control is 10.2.0.4 - note that you have to turn off instance status metric or you get too many files open - a bug that they are doing a patch for.
    You are correct thou - 11g DB control is bundled with the db, but that is db control not grid control - a similar but unique product.

  • Enterprise Manager on RedHat 6.0

    I have just installed the download version of 8i on a RedHat 6.0
    system. The install went reasonably smooth once I found all the
    extra pieces (JRE, TCL rpm's etc) that were needed. My problem
    is that I can't get Enterprise Manager to work. Issuing any
    command which would involve oemapp results in a file not found
    message. A quick search of the oracle home directory structure
    doesn't lead me to any thing obvious. What do I do know?
    John Guenther
    null

    Erick,
    I did try the PL/SQL samples and they don't work either. Oracle
    Home, YES, is differnt than the Oracle Home where the Oracle is
    but, why does he care ? will he not use the SQL*NET to get
    connected to the Oracle? I will try changing it anyway today in
    the evening. I tried sending you an email it says invalid address
    . If its okay with you on an email than could you write me an
    email with your email addr. I will appreciate that.
    thanks
    Vikram.
    Erik Nielsen (guest) wrote:
    : The problem with your pl/sql agents is probably the DAD
    : configuration. Make sure ORACLE_HOME is set correctly, and
    make
    : sure you don't have any infinite loops in your pl/sql code...
    : (that happened to me ;-).
    : I only use the pl/sql cartridge, so I know it works. Have you
    : tried any of Oracle's pl/sql examples? Do they work?
    : Erik
    : Vikram (guest) wrote:
    : : Hi Erick,
    : : Your scripts for running the OAS302 on 6.0 linux had been
    very
    : : helpful.
    : : Now I am able to run the listeners and even able to create
    the
    : : packages and users in the database via the OAS 3.0.2 but the
    : : problem starts when accessing a procedure in the database
    using
    : : the pl/sql agent. By the way i am using Oracle 8.0.5.1 RDBMS
    : and
    : : its home is different than the web server home.
    : : The browser just does nothing and even does not log any error
    : : message ,I have to stop it after a while but all my other
    : : cartridges are working.
    : : any insight will be appreciated.
    : : thanks,
    : : Vikram ( Ironically enough I work for Oracle).
    null

  • Install enterprise manager in Windows Vista

    Hello,
    As I have read on Oracle documentation it isn't possible to install Enterprise Manager 10g Grid Control in Windows Vista. So is there any other similar component to remote managing a Database (this is running in Windows Server 2003).
    Thanks a lot.
    This is the error message;
    Iniciando Oracle Universal Installer...
    Comprobando requisitos de Installer...
    Comprobando la versión del sistema operativo: debe ser  4.0, 5.0, 5.1 or 5.2 .
    Real 6.0
    Fallo <<<<
    Saliendo de Oracle Universal Installer, no se ha encontrado el log de esta sesió
    n en C:\Users\miguel\AppData\Local\Temp\OraInstall2009-01-23_11-03-01PM\installA
    ctions2009-01-23_11-03-01PM.log
    Pulse Intro para salir...
    Edited by: user7134478 on 23-ene-2009 14:03

    Its possible follow the RN
    "Support of Enterprise Manager Grid Control Version 10.2.0.4 Installation on Windows 2008/Vista"
    http://download.oracle.com/docs/cd/B16240_01/doc/doc.102/e10552/toc.htm

Maybe you are looking for