Enterprise Manager Connections

Hello,
I have used Oracle Enterprise Manager previously and all my connections used to work, but now some of my connections are no longer working and now simply provide a message box stating "ORA-12514: TNS listener does not currently know of service request in connector descriptor". The database I am trying to connect to again runs on UNIX and is currently Oracle 10g.
Can someone advise please? Forgive my igorance in ths matter but DBA stuff is not my usual thing.
Thanks in advance
Regards
Alano

Hi,
I have it working. It was nothing to do with the listener obviously because I managed to get logged in without doing anything with the listener. However, this is strange because it only allows me to log in as the SYS user ubder "Normal" mode!!! Anybody have any ideas?
Regards
Alano

Similar Messages

  • Internet explorer Enterprise Manager connectivity on the 2nd database

    I am using oracle 10g release 2 on Linux red hat.
    I just created using DBCA utility another database on the same oracle instance. When i try to connect using Internet exploere Oracle enterprise manager it goes to the connectivity of the 1st database. I am using
    http://<IP address>:1158/em/console
    How can i get the connectivity for the new database?

    You need to make sure the EM dbconsole is running for the second database. On your Linux host do the following:
    export ORACLE_SID=<second db SID>
    emctl status dbconsole -- to see if it is running
    emctl start dbconsole -- to star the dbconsole
    The output will give the proper URL to connect to the EM console.

  • Enterprise Manager connection refused

    I have installed Oracle Collaboration Suite on Red Hat Linux AS 3 single box.when I try to start OEM console as http://hostname:1810, it gives the connection refused error.when I try to start emctl process it waits for some time then aborts.how do i start the emctl process.
    please help.
    thanks

    $ORACLE_HOME/bin
    ./emctl start

  • 10g Enterprise Manager is not able to connect to the database instance

    I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
    The database instance is open,the listener is up and the agent connection also says that it succeeded.
    The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
    Thanks in advance.
    Ram

    Hi,
    The EM is started and if i give emctl status dbconsole
    -bash-3.00$ emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    http://gladiator:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is running
    Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
    it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
    Thanks in advance.
    Ram

  • Enterprise Manager is not able to connect to the database instance....

    Hi all,
    Currently i'm facing a big issue here.
    I have install the Oracle 10g on Window 2003 SE.
    And currently the Enterprise manager is not be able to conenct to the database and my database is still running.With my listener is up.
    But from the Enterprise manager's it show that everythg is down.
    and when i try to restart it,i ask for os id and password and dbuser and dbpassword.
    frm the SQL plus,i can easily startup and shutdown the database.
    So i would like to know i can rectify this problem.
    please kindly help me.I have post the setting of the databse as below
    tnsnames.ora
    ==========
    # Filename......: tnsnames.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
    SDB.WORLD=
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = SAP_SOLMAN)
    (PORT = 1527)
    (CONNECT_DATA =
    (SID = SDB)
    (GLOBAL_NAME = SDB.WORLD)
    sqlnet.ora
    ========
    # sqlnet.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\sqlnet.ora
    # Generated by Oracle configuration tools.
    # 05.01.06 set to default
    #TCP.NODELAY=YES
    # 05.01.06 set to 32768
    # 05.01.06 unsorported parameter now
    #NAME.DEFAULT_ZONE = WORLD
    # 05.01.06 set the default to 10
    # Filename......: sqlnet.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT, HOSTNAME, LDAP)
    NAMES.DEFAULT_DOMAIN = WORLD
    DEFAULT_SDU_SIZE = 32768
    SQLNET.EXPIRE_TIME = 10
    Listener.ora
    =========
    # Filename......: listener.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = SDB.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = SDB)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = SAP_SOLMAN)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = SDB)
    (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
    Listener status
    ===========
    LSNRCTL> status
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=SDB.WORLD))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 15-AUG-2006 15:14:48
    Uptime 0 days 2 hr. 43 min. 31 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File E:\oracle\product\10.2.0\db_1\network\admin\listener.o
    ra
    Listener Log File E:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDB.WORLDipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDBipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAP_solman)(PORT=1527)))
    Services Summary...
    Service "SDB" has 1 instance(s).
    Instance "SDB", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    emoms.log
    ========
    2006-08-15 18:03:20,562 [HttpRequestHandler-2254042] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
         at oracle.sysman.emdrep.receiver.OMSHandshake.getParameterFromDB(OMSHandshake.java:387)
         at oracle.sysman.emdrep.receiver.OMSHandshake.getMaxAgentCompatVer(OMSHandshake.java:369)
         at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:794)
         at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:648)
         at oracle.sysman.emdrep.receiver.FxferRecv.doGet(FxferRecv.java:658)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake getParameterFromDB.402 - Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://SAP_solman:3938/emd/main)(ERROR = INTERNAL_ERROR)
    2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:368)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:395)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:144)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2006-08-15 18:03:36,531 [HttpRequestHandler-9249408] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
    2006-08-15 18:03:36,531 [EMUI_18_03_36_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
    java.lang.IllegalStateException: Response has already been committed
         at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
         at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
         at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
         at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
         at oracle.sysman.eml.app.Console.doGet(Console.java:135)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    OracleDBConsoleSDBsrvc.log
    ======================
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/09/06 15:11:59 Start pending...
    08/09/06 15:11:59 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/09/06 15:12:04 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/09/06 15:12:04 Tracking process launch...
    08/09/06 15:12:41 Received exitCode 3 from emctl istatus
    08/09/06 15:12:41 dbconsole started
    08/11/06 08:46:03 Recieved ServCtrlHdlr command, 5
    08/11/06 08:46:03 Stopping dbconsole
    08/11/06 08:46:03 Launching stop EMD process...
    08/11/06 08:46:03 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 08:46:06 Stop process has exited with exitCode: 0
    08/11/06 08:46:06 Waiting for emwd process to exit. numRetries=74
    08/11/06 08:46:06 Watchdog process exited with exit code 15
    08/11/06 08:46:06 Signal Shutdown event.
    08/11/06 08:46:06 Shutdown thread exited.
    08/11/06 08:46:06 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 08:45:17 Start pending...
    08/11/06 08:45:17 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 08:45:26 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 08:45:26 Tracking process launch...
    08/11/06 08:46:11 Received exitCode 3 from emctl istatus
    08/11/06 08:46:11 dbconsole started
    08/11/06 08:48:58 Recieved ServCtrlHdlr command, 5
    08/11/06 08:48:58 Stopping dbconsole
    08/11/06 08:48:58 Launching stop EMD process...
    08/11/06 08:48:58 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 08:49:02 Stop process has exited with exitCode: 0
    08/11/06 08:49:02 Waiting for emwd process to exit. numRetries=74
    08/11/06 08:49:02 Watchdog process exited with exit code 15
    08/11/06 08:49:02 Signal Shutdown event.
    08/11/06 08:49:02 Shutdown thread exited.
    08/11/06 08:49:02 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 08:53:20 Start pending...
    08/11/06 08:53:20 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 08:53:29 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 08:53:29 Tracking process launch...
    08/11/06 08:54:14 Received exitCode 3 from emctl istatus
    08/11/06 08:54:14 dbconsole started
    08/11/06 11:37:30 Recieved ServCtrlHdlr command, 5
    08/11/06 11:37:30 Stopping dbconsole
    08/11/06 11:37:30 Launching stop EMD process...
    08/11/06 11:37:30 Waiting for stop EMD process to exit. numRetries=74
    08/11/06 11:37:34 Stop process has exited with exitCode: 0
    08/11/06 11:37:34 Waiting for emwd process to exit. numRetries=74
    08/11/06 11:37:34 Watchdog process exited with exit code 15
    08/11/06 11:37:34 Signal Shutdown event.
    08/11/06 11:37:34 Shutdown thread exited.
    08/11/06 11:37:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/11/06 11:36:48 Start pending...
    08/11/06 11:36:48 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/11/06 11:36:56 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/11/06 11:36:56 Tracking process launch...
    08/11/06 11:37:41 Received exitCode 3 from emctl istatus
    08/11/06 11:37:41 dbconsole started
    08/15/06 09:31:52 Recieved ServCtrlHdlr command, 5
    08/15/06 09:31:52 Stopping dbconsole
    08/15/06 09:31:52 Launching stop EMD process...
    08/15/06 09:31:52 Waiting for stop EMD process to exit. numRetries=74
    08/15/06 09:31:56 Stop process has exited with exitCode: 0
    08/15/06 09:31:56 Waiting for emwd process to exit. numRetries=74
    08/15/06 09:31:56 Watchdog process exited with exit code 15
    08/15/06 09:31:56 Signal Shutdown event.
    08/15/06 09:31:56 Shutdown thread exited.
    08/15/06 09:31:56 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/15/06 09:31:06 Start pending...
    08/15/06 09:31:06 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/15/06 09:31:14 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/15/06 09:31:14 Tracking process launch...
    08/15/06 09:31:49 Did not hear back from emctl istatus.
    08/15/06 09:31:49 Waiting a further 5 secs...
    08/15/06 09:31:51 Received exitCode 3 from emctl istatus
    08/15/06 09:31:51 dbconsole started
    08/15/06 15:15:31 Recieved ServCtrlHdlr command, 5
    08/15/06 15:15:31 Stopping dbconsole
    08/15/06 15:15:31 Launching stop EMD process...
    08/15/06 15:15:31 Waiting for stop EMD process to exit. numRetries=74
    08/15/06 15:15:34 Stop process has exited with exitCode: 0
    08/15/06 15:15:34 Waiting for emwd process to exit. numRetries=74
    08/15/06 15:15:34 Watchdog process exited with exit code 15
    08/15/06 15:15:34 Signal Shutdown event.
    08/15/06 15:15:34 Shutdown thread exited.
    08/15/06 15:15:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [OracleDBConsoleSDB] ------------
    EMDROOT=E:\oracle\product\10.2.0\db_1
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    08/15/06 15:14:46 Start pending...
    08/15/06 15:14:46 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    08/15/06 15:14:54 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    08/15/06 15:14:54 Tracking process launch...
    08/15/06 15:15:29 Did not hear back from emctl istatus.
    08/15/06 15:15:29 Waiting a further 5 secs...
    08/15/06 15:15:32 Received exitCode 3 from emctl istatus
    08/15/06 15:15:32 dbconsole started
    Command prompt for emctls status
    =========================
    E:\oracle\product\10.2.0\db_1\BIN>emctl status
    Environment variable ORACLE_SID not defined. Please define it.
    emd.properties
    ===========
    # perl executable directory
    perlBin=E:\oracle\product\10.2.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread
    # script directory
    scriptsDir=E:\oracle\product\10.2.0\db_1/sysman/admin/scripts
    # emd Root directory(read-only location). Metrics should not create files
    # under this directory
    emdRoot=E:\oracle\product\10.2.0\db_1
    # agent Root directory(writeable).
    # Use this property to base any temporary file creation.
    agentStateDir=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB
    # Chronos root directory
    chronosRoot=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/emd/chronos
    # OMS Upload URL
    # if there is no receiving OMS or if you wish to disable the UploadManager
    # please set this value to empty or comment out below line
    REPOSITORY_URL=http://SAP_solman:5500/em/upload/
    # Proxy settings used for fetchlets. not applicable for uploader.
    #proxyHost=www-proxy.us.oracle.com
    #proxyPort=80
    #dontProxyFor=.us.oracle.com
    # If it is necessary to go through an http proxy server to get to the
    # repository, uncomment the following two lines
    #REPOSITORY_PROXYHOST=
    #REPOSITORY_PROXYPORT=
    #REPOSITORY_PROXYREALM=%EM_REPOS_PROXYREALM%
    #REPOSITORY_PROXYUSER=%EM_REPOS_PROXYUSER%
    #REPOSITORY_PROXYPWD=%EM_REPOS_PROXYPWD%
    # This string is used by the agent to connect to remote targets
    # ***IMPORTANT*** Do not change the contents of this setting. Only the
    # install should modify this value.
    agentSeed=1329576760
    # This string is used by the agent to determine which algorithm to use for encrypted data
    # The string value will be same as the release version
    agentVersion=10.1.0.4.0
    # How long, in minutes, collector will wait until next load.
    UploadInterval=5
    # If an upload fails, we want to backoff by UploadFailBackoff
    # percentage more each time for each successive upload failure
    # e.g. if we start the retry at 1 minute. If we fail in our next
    # upload attempt, we try again 1minute 12 seconds later etc.
    UploadFailBackoffPct= 20
    # Maximum amount of time, in seconds, upload will wait for response from
    # repository before timing out.
    # 0 means infinite.
    UploadTimeout=1800
    # Timeout for upload a file, HealthMonitor will abort the EMD process if
    # UploadManager does not finish uploading one file within this time
    # Unit is minite, the default value is 1 hour ( 15 Min)
    #UploadMaxTime=15
    # How big the file the collector will upload (in KB)
    # the actual file size could be slightly bigger.
    # This is only a guidance.
    UploadFileSize=2048
    # The maximum number of megabytes(MB) the upload manager will support in the
    # upload directory before temporarily being disabled
    UploadMaxBytesXML=50
    # The maximum number of files the upload manager will support in the
    # upload directory before temporarily being disabled
    UploadMaxNumberXML=5000
    # The maximum amount (%) of disk space that can be used on the EMD filesystem
    # before the following is disabled:
    # - Collection of data (upload manager)
    # - Logging and tracing
    UploadMaxDiskUsedPct=98
    # The amount (%) of disk space that can be used on the EMD filesystem
    # before the following is re-enabled after being disabled previously:
    # - Collection of data (upload manager)
    # - Logging and tracing
    UploadMaxDiskUsedPctFloor=95
    # Time out for the Agent to think that the access to the database could be
    # hung. The Agent would not allow more threads to go and hang with a database
    # if any one access to the database does not return within DbHangTimeout
    # seconds.
    # The more the timeout more the possibility of allowing more threads
    # to be hung in the EMD with a bad database.it is specified in seconds.
    #DbHangTimeout=200
    # The script to run if disk space usage exceeds parameters or if certain other
    # error conditions occur.
    #emdFailureScript=emdfail.command
    # The location of the file that contains the root certificate.
    emdRootCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64LocalCertificate.txt
    internetCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64InternetCertificate.txt
    # The download URL for the EMD Oracle Wallet and its local file location.
    # Note: Ensure that this URL references a valid port number at which the
    # console is available on http
    emdWalletSrcUrl=http://SAP_solman:5500/em/wallets/emd
    emdWalletDest=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/server
    # The email address for out-of-band notifications
    emd_email_address=
    emd_email_gateway=
    # The return email address for out-of-band notifications
    emd_from_email_address=
    # EMD main servlet URL
    EMD_URL=http://SAP_solman:3938/emd/main
    # Whether the EMD should listen on all NICs on the current host (the default)
    # or just the NIC associated with the hostname in EMD_URL
    AgentListenOnAllNICs=TRUE
    # This parameter indicates the thread model to use. uncomment one of the
    # following ThreadPoolModel line to indicate the model, agent need to use.
    # SMALL if number of targets is less than 11.
    # MEDIUM if number of targets is from 11 to 50.
    # LARGE if number of targets is greater than 50.
    # This parameter can be overriden by 'MaxThreads' which indicates the maximum
    # number of threads that CEMD can have running at any point of time. User can
    # mostly use the other parameter ThreadPoolModel to indicate what model for the
    # agent to use.
    # ThreadPoolModel = SMALL
    # ThreadPoolModel = MEDIUM
    # ThreadPoolModel = LARGE
    # This parameter indicates the stack size, threads have to be created with.
    # we can set it to 0 to use the OS default value.
    # In some version of solaris(such as 2.9 ) specify a stack size may cause Java Hotspot warning
    # when JVM is used.
    NormalThreadStackSize=0
    #Signals that users want to ignore.
    #It can be one or combination of SIGTERM, SIGINT
    # The signals can listed with ',' as delimiter.
    #IgnoreSignals=
    # This property is NO LONGER USED for host config collection (instead, hostConfigClasspath is used).
    # If noone else uses it, it can be removed.
    ouiLoc=E:\oracle\product\10.2.0\db_1/oui
    # Classpath for host config collection
    # VERY IMPORTANT NOTE: If you change the host config classpath entries in this section, you HAVE
    # to change the HOST_CONFIG_TEST_CLASSPATH entry in the utl/emdwqaenv file too.
    # NOTE: if the location of emd_java.jar and/or log4j-core.jar is changed
    # make sure that appropriate changes are also made
    # to the CLASSPATH variable in this file if necessary
    # PORTING NOTE: Check OUI-required jar files for OUI APIs to work. They could be different on your platform.
    # Also, our version of xmlparserv2.jar must be compatible with the one OUI expects (both OUI and ECM use XML parser).
    hostConfigClasspath=E:\oracle\product\10.2.0\db_1/oui/jlib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/OraInstaller.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/srvm.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/share.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar
    # JAVA HOME required for JavaExt metric calls
    JAVA_HOME=E:\oracle\product\10.2.0\db_1/jdk/jre
    # CLASSPATH required for JavaExt metric calls
    CLASSPATH=E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/ons.jar;E:\oracle\product\10.2.0\db_1/lib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar;E:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/lib/http_client.jar;E:\oracle\product\10.2.0\db_1/lib/dms.jar;E:\oracle\product\10.2.0\db_1/lib/dmsEmd.jar;E:\oracle\product\10.2.0\db_1/jlib/share.jar;E:\oracle\product\10.2.0\db_1/jdbc/lib/ojdbc14dms.jar;E:\oracle\product\10.2.0\db_1/jlib/jssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/javax-ssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/lib/em_test.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/jlib/repository.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/optic.jar
    # this is the java option
    #JAVA_OPTIONS=-Xmx128m
    # These are the optional Java flags for the in-process Java
    # Native Interface (JNI)
    agentJavaDefines=-Doracle.dms.refresh.wait.time=1000 -DUrlTiming.UseJSSE=true
    # When set to true, the emd.log and emd.trc file will be appended by a pid
    # For example:
    # emd_15789.log
    # emd_15789.trc
    # By default, it is not set for regression test purpose.
    # After installed, please uncomment this line because when EMD is restarted,
    # previous log information will be lost if not set to true.
    #LogFileWithPID=true
    # Default log file maximum size before rolling in Kilobytes
    LogFileMaxSize=4096
    # Maximum number of log file roll files to maintain before deletion
    LogFileMaxRolls=4
    # Default trace file maximum size before rolling in Kilobytes
    TrcFileMaxSize=4096
    # Maximum number of trace file roll files to maintain before deletion
    TrcFileMaxRolls=4
    # To enable the metric browser, uncomment the following line
    # This is a reloadable parameter
    #enableMetricBrowser=true
    # To disable Remote operations (non-reachable agent) uncomment the following
    # line:
    #disableRemoteOperations=true
    # add an additional admin path from which the agent will read additional
    # target metadata. The specified path should have the mandatory 4 directories
    # under it. 1. metadata 2. scripts 3. default_collection 4. discover
    #altAdminPath=<additional admin path>
    # The health monitor executes callbacks in a separate thread. if for some
    # reason the threads spawned from health monitor to execute callbacks are
    # hung, the agent could run out of resource and freeze.
    # so when the current thread count spawned from the Health monitor reaches
    # this limit, the agent is bounced. the default is set to 5.
    #MaxHealthMonitorThreads=5
    # dynamicPropsComputeTimeout default to 30s
    dynamicPropsComputeTimeout=60
    # emagent perl tracing levels
    # supported levels: DEBUG, INFO, WARN, ERROR
    # default level is ERROR
    EMAGENT_PERL_TRACE_LEVEL=ERROR
    # other optional parameters for perl tracing
    # EMAGENT_PERL_TRACE_DIR default to $ORACLE_HOME/sysman/log
    #EMAGENT_PERL_TRACE_DIR=
    # EMAGENT_PERL_TRACE_FILESIZE default to 5M
    #EMAGENT_PERL_TRACE_FILESIZE=5
    # this section define the logging level for each component,
    # it is "reloadable", you can change the level at runtime to reset
    # the logging level, but if you remove the line, it will not be
    # changed.
    tracelevel.main=WARN
    tracelevel.emSDK.xml=WARN
    tracelevel.emSDK.utl=WARN
    tracelevel.ResMonitor=WARN
    tracelevel.Dispatcher=WARN
    tracelevel.ThreadPool=WARN
    tracelevel.pingManager=WARN
    tracelevel.collector=WARN
    tracelevel.http=WARN
    tracelevel.ssl=WARN
    tracelevel.ssl.io=WARN
    tracelevel.blackouts=WARN
    tracelevel.upload=WARN
    tracelevel.command=WARN
    tracelevel.reload=WARN
    tracelevel.scheduler=WARN
    tracelevel.Authentication=WARN
    tracelevel.metadata=WARN
    tracelevel.targets=WARN
    tracelevel.TargetManager=WARN
    tracelevel.engine=WARN
    tracelevel.javaproc=WARN
    tracelevel.vpxoci=WARN
    tracelevel.javavm=WARN
    tracelevel.fetchlets=WARN
    tracelevel.fetchlets.os=WARN
    tracelevel.fetchlets.osline=WARN
    tracelevel.fetchlets.oslinetok=WARN
    tracelevel.fetchlets.UDM=WARN
    tracelevel.fetchlets.sql=WARN
    tracelevel.fetchlets.url=WARN
    tracelevel.fetchlets.urllines=WARN
    tracelevel.fetchlets.urllinetoken=WARN
    tracelevel.fetchlets.URLTiming=WARN
    tracelevel.fetchlets.propEcho=WARN
    tracelevel.fetchlets.readFromFile=WARN
    tracelevel.fetchlets.readMultFromFile=WARN
    tracelevel.fetchlets.throwable=WARN
    tracelevel.fetchlets.resourceGrab=WARN
    tracelevel.fetchlets.emSDK=WARN
    # The following three properties are for HTTP timeout
    # Timeout value for reading Http primary header, default is 30 seconds.
    httpTimeoutPrimaryHeader=30
    # Timeout value for reading http secondary headers, default is 30 seconds
    httpTimeoutSecondaryHeaders=30
    # Timeout value for reading http body, default is 60 seconds.
    httpTimeoutBody=60
    omsRecvDir=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\sysman\recv
    agentTZRegion=+08:00
    And i would like to know how to set up the environment variable for Oracle_HOME and ORACLE_SID.
    Please kindly assist me on this.

    Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
    emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
    As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
    -Ramesh

  • Enterprise Manager is not able to connect to the database instance. The sta

    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
    Listener is shown as unavailable.
    lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-NOV-2012 11:52:40
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=freds-server.i-surname.co.uk)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 27-NOV-2012 11:50:02
    Uptime 0 days 0 hr. 2 min. 37 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /opt/oracle/11g/network/admin/listener.ora
    Listener Log File /opt/oracle/diag/tnslsnr/freds-server/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Services Summary...
    Service "GWORCL.i-surname.co.uk" has 2 instance(s).
    Instance "GWORCL", status UNKNOWN, has 1 handler(s) for this service...
    Instance "GWORCL", status READY, has 1 handler(s) for this service...
    Service "GWORCLXDB.i-status.co.uk" has 1 instance(s).
    Instance "GWORCL", status READY, has 1 handler(s) for this service...
    The command completed successfully
    I suspect that this is not just an OEM issue.
    see
    Listener working but not working for Enterprise manager oracle 11gr2 Linux.
    for configuration files
    Edited by: Neill_R on Nov 27, 2012 11:51 AM

    This was solved by : Osama_mustafa
    in the general questions forum
    emca -deconfig dbcontrol db -repos drop
    emca -config dbcontrol db -repos create

  • Problem with EM (Enterprise Manager is not able to connect to the database)

    Hi all,
    I've Oracle DB 11g Rel.1 installed on Windows XP SP3. The database is up and running i.e. everyone can connect to the DB by using any App tool e.g. SQL*Plus, Forms, or Reports. It means that the listener and the service is running. But the problem is that when I try to start the EM I see some error messages on the webpage.
    It says:
    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.Database Instance (Green arrow)
    Status     Open                         Details     The instance is open.
    Host          shiman
    Port          *1521*
    SID          orcl
    Oracle Home     d:\Oracle\product\11.1.0\db_1
    Agent Connection to Instance (Green arrow)
    Status Succeeded
    Details
    Listener (Green arrow)
    Status     Up
    Host          shiman
    Port          *1521*
    Name          LISTENER
    Oracle Home     d:\Oracle\product\11.1.0\db_1
    Location     d:\Oracle\product\11.1.0\db_1\network\admin
    Details          
    please see the attached file:
    http://rapidshare.com/files/404840300/em.JPGI've already checked all the services, they are running. And when I execute emctl command I got the following message.
    emctl status dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    http://shiman:1158/em/console/aboutApplication
    Oracle Enterprise Manager 11g is running.I have checked some documents around config files in sysman and test_orcl\sysman directories. Moreover, I have checked dbsnmp and sysman account for unlockness and password accuracy. But they did not help me to solve the problem.
    My question is if every thing is working fine then what is the problem with the EM? Why it is not connecting to the DB?
    Thanks.
    Iman

    emdctl.trc2010-07-13 18:42:21 Thread-2196 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
    (error = 10061)
    2010-07-13 18:42:26 Thread-4856 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
    (error = 10061)
    2010-07-13 18:42:28 Thread-5684 ERROR ssl: nzos_Handshake failed, ret=28864
    2010-07-13 18:42:28 Thread-5684 ERROR http: 1704: Unable to initialize ssl connection with server, aborting connection attempt
    2010-07-13 18:42:28 Thread-5684 ERROR main: nmectla_agentctl: Error connecting to https://shiman:3938/emd/main. Returning status code 1
    emoms.trc2010-07-13 18:45:44,562 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:46,875 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:46,921 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:47,078 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:47,125 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:47,140 [ApplicationServerThread-3] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:47,187 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:47,234 [ApplicationServerThread-5] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:47,281 [ApplicationServerThread-4] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:47,328 [ApplicationServerThread-6] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:48,984 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
    2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has already been committed
    java.lang.IllegalStateException: Response has already been committed
         at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1853)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:260)
         at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)
         at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
         at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:1113)
         at oracle.sysman.emSDK.svlt.PageHandler.myRender(PageHandler.java:1173)
         at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:597)
         at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
         at oracle.sysman.eml.app.Console.doGet(Console.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
         at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
         at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR em.console doGet.357 - java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
    java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
         at com.evermind.server.http.EvermindHttpServletResponse.sendRedirect(EvermindHttpServletResponse.java:1339)
         at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:806)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
         at oracle.sysman.eml.app.Console.doGet(Console.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
         at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
         at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)

  • Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.

    Dear all,
    I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
    error is:
    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
    It shows that agent is connected, database and listener is up.
    I did recreation, dropping and recreating with emca, but no success.
    Did anyone have similar problems with em console?
    Regards,

    You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
    If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance".

  • Enterprise manager is not able to connect to database instance

    Hi
    I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
    I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
    But the problem is that, when I try to connect to database with EM, it says:
    Enterprise manager is not able to connect to database instance . The state of the components are listed below.
    Can anoyone help me?

    user10637311 wrote:
    When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
    "emca -config dbcontrol db -repos create". for these two cases istener should be running.
    emctl start dbconsole -> to start dbconsole service
    emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
    emca -config dbcontrol db -repos create :
    <last part>:
    INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
    s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
    Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
    INFO: Stopping Database Control (this may take a while) ...
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
    INFO: Creating the EM repository (this may take a while) ...
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
    SEVERE: Error creating the repository
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
    INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
    cl\emca_repos_create_<date>.log for more details.
    Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Error creating the repository
    Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
    a_2010-02-18_02-01-40-AM.log for more details.
    Could not complete the configuration. Refer to the log file at C:\oracle\product
    \10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
    ils.
    C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
    cl\emca_repos_create_<date>.log:
    Check if repos user already exists.
    old 6: WHERE username=UPPER('&EM_REPOS_USER');
    new 6: WHERE username=UPPER('SYSMAN');
    old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
    new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
    old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
    new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
    old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
    new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
    old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
    new 17: raise_application_error(-20001, 'SYSMAN already exists..');
    old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
    new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
    DECLARE
    ERROR at line 1:
    ORA-20001: SYSMAN already exists..
    ORA-06512: at line 17

  • Enterprise Manager is not able to connect to the database instance. Open??

    Hello there,
    After I installed oracle database and tried to start Enterprise Manager, I got the message:
    Enterprise Manager is not able to connect to the database instance.
    All statuses are OK (green and up) except database instance. It is also green and up but open. (Details: The instance is open.)
    Can anyone help me about it?
    I use Windows XP x64 with all patches installed. Oracle database R11g x64.
    I tried with different database versions and different machines and different OS and loopback adapter and... my EM still want to log in.
    I can log in with sqlplus. It accepts any pass for sys (as sysdba). Why?
    My log files are available here: http://195.66.185.187/log.zip

    You are using a bequeath connection when logging in with SQL*Plus on the server so the password is not validated.
    Log in using SQL*Plus this way:
    sqlplus /nolog
    followed by
    conn sys@<service_name> AS SYSDBA
    and provide the correct password
    My guess it it will fail.
    If so then you need to use the correct password and if you don't know what it is set it when logged on as SYS.

  • Enterprise manager is Not Connecting to database

    Hi
    I installed oracle 10g on my system the installation was successfull but in the enterprise manager console
    1.database instance is down
    2.Listener is up and running
    3.Agent Connection to Instance
    Status Failed
    Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
    starting the database with sysoper I m having following queries executed but EMC is not able to connect to the database
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 2 23:58:04 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> SQL> Connected to an idle instance.
    SQL> ORACLE instance started.
    Database mounted.
    Database opened.
    SQL> Disconnected from Oracle Database 10g Release 10.2.0.1.0 - Production
    starting the database with sysdba I m having following exception
    SQLException
    Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCL10G)))
    I m able to work from windows commant prompt by using following commands
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    G:\oracle\product\10.2.0\db_2\BIN>emctl status dbconsole
    Environment variable ORACLE_SID not defined. Please define it.
    G:\oracle\product\10.2.0\db_2\BIN>set ORACLE_SID=ORCL10G
    G:\oracle\product\10.2.0\db_2\BIN>emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://127.0.0.1:5500/em/console/aboutApplication
    Oracle Enterprise Manager 10g is running.
    Logs are generated in directory g:\oracle\product\10.2.0\db_2/127.0.0.1_ORCL10G/
    sysman/log
    G:\oracle\product\10.2.0\db_2\BIN>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-APR-2008 23:36
    :55
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 02-APR-2008 23:17:44
    Uptime 0 days 0 hr. 19 min. 11 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File g:\oracle\product\10.2.0\db_2\network\admin\listener.o
    ra
    Listener Log File g:\oracle\product\10.2.0\db_2\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    G:\oracle\product\10.2.0\db_2\BIN>lsnrctl service
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-APR-2008 23:37
    :06
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    The command completed successfully
    G:\oracle\product\10.2.0\db_2\BIN>sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 2 23:37:28 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> conn/as sysdba
    Connected.
    SQL>
    Please tell Me what is the problem

    Tony Cool,
    Please don't post this in every forum you can spell. You also posted this as [email protected] in comp.databases.oracle.server.
    The only thing you should do is
    Look up the error messages in the online documentation and work from there.
    This are known errors, the solution is all over the Internet, there is really no need for you to request volunteers to deliver it on your doorstep for free.
    Sybrand Bakker
    Senior Oracle DBA

  • Unable start up the Enterprise Manager is not able to connect to database

    hi,
    i am unable to start up the Enterprise Manager is not able to connect to the database instance.
    This is the status
    Host          
    chinna
    Port          
    1521
    SID          
    orcl
    Oracle Home          
    C:\app\Administrator\product\11.1.0\db_3
    Listener
    Status          
    Down
    Host          
    akil
    Port          
    1521
    Name          
    LISTENER
    Oracle Home          
    C:\app\Administrator\product\11.1.0\db_3
    Location          
    C:\app\Administrator\product\11.1.0\db_3\network\admin
    Details          TNS-12541: TNS:no listener
    Agent Connection to Instance
    Status          
    Failed
    Details          ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)

    Hi,
    Details     ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)Please check Listener, Database and enterprise manager Service is up and running.
    regards,
    Xaheer

  • Problem: Enterprise Manager is not able to connect to the database instance

    Hello,
    I've got problem with EM. When I try to connect to it I get the following error:
    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
    Database Instance, Listener and Agent are all green.
    Few more information:
    OS: Win7 64 bit
    -installed loopback adapter. I can ping my computer name (J-PC) without problem and it pings back 10.10.10.10 address.
    -I have set the ORACLE_HOME and ORACLE_SID env variables
    -I can login to sqlplus with sysman account
    -emctl status dbconsole shows that the EM 11g is running
    I've been struggling for some time trying to get EM running as it should, but no luck so far.
    If you need any more info, do ask. Tnx.

    Hi,
    Regarding causes:
    1. This is inside listener.ora file:
    SID_LIST_LISTENER =
    +(SID_LIST =+
    +(SID_DESC =+
    +(SID_NAME = CLRExtProc)+
    +(ORACLE_HOME = C:\app\J\product\11.2.0\dbhome_1)+
    +(PROGRAM = extproc)+
    +(ENVS = "EXTPROC_DLLS=ONLY:C:\app\J\product\11.2.0\dbhome_1\bin\oraclr11.dll")+
    +)+
    +)+
    LISTENER =
    +(DESCRIPTION_LIST =+
    +(DESCRIPTION =+
    +(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))+
    +(ADDRESS = (PROTOCOL = TCP)(HOST = J-PC)(PORT = 1521))+
    +)+
    +)+
    ADR_BASE_LISTENER = C:\app\J
    ...and this is examples of errors in emoms.trc:
    +2012-05-25 00:29:28,782 [HTTPThreadGroup-49] ERROR conn.ConnectionService verifyRepositoryEx.891 - Invalid Connection Pool. ERROR = Locale not recognized+
    +2012-05-25 00:29:28,798 [HTTPThreadGroup-49] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = http://J-PC:3938/emd/main)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Locale not recognized)+
    +2012-05-25 00:29:28,860 [HTTPThreadGroup-49] ERROR conn.ConnectionService verifyRepositoryEx.891 - Invalid Connection Pool. ERROR = Locale not recognized+
    +2012-05-25 00:29:28,872 [HTTPThreadGroup-49] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = http://J-PC:3938/emd/main)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Locale not recognized)+
    +2012-05-25 00:29:40,908 [HTTPThreadGroup-49] ERROR conn.ConnectionService verifyRepositoryEx.891 - Invalid Connection Pool. ERROR = Locale not recognized+
    +2012-05-25 00:29:40,924 [HTTPThreadGroup-49] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = http://J-PC:3938/emd/main)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Locale not recognized)+
    +2012-05-25 00:29:52,811 [SystemThreadGroup-8] ERROR app.SessionObjectManager sessionDestroyed.128 - java.sql.SQLException: Locale not recognized+
    java.sql.SQLException: Locale not recognized
    2.
    Running lsnrctl status:
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 25-MAY-2012 07:54:17
    Uptime 0 days 0 hr. 21 min. 25 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\app\J\product\11.2.0\dbhome_1\network\admin\listene
    r.ora
    Listener Log File c:\app\j\diag\tnslsnr\J-PC\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J-PC)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Tnx for the help.

  • Enterprise Manager is not able to connect to the db instance?

    Hi there,
    Everything is up and running but Enterprise Manager is not able to connect to the database instance. Could you please help?

    Here shows the status:
    C:\>emctl status agent
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    Agent Version : 10.1.0.5.1
    OMS Version : 10.1.0.5.0
    Protocol Version : 10.1.0.2.0
    Agent Home : C:\oracle\product\10.2.0\db_1\gomandb1.flyfrontier.com_airte
    st
    Agent binaries : C:\oracle\product\10.2.0\db_1
    Agent Process ID : 2164
    Agent Process ID : 2164
    Agent URL : http://gomandb1.flyfrontier.com:3938/emd/main
    Started at : 2008-02-20 14:35:19
    Started by user : SYSTEM
    Last Reload : 2008-02-20 14:35:19
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 2669
    Size of XML files pending upload(MB) : 16.64
    Available disk space on upload filesystem : 12.92%
    Agent is Running and Ready
    C:\>emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    http://gomandb1.flyfrontier.com:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is running.
    Logs are generated in directory C:\oracle\product\10.2.0\db_1/gomandb1.flyfronti
    er.com_airtest/sysman/log
    C:\>

  • Error while testing Driver connection Through The EnterPrise Manager

    Hi -
    I am using OAS 10.1.3v for my application.I am using both SQL Server 2000 JDBC driver and Oracle JDBC driver for my application. I am encountering problems due to SQL Server 2000 JDBC driver.
    I tried testing for connectivity for SQL driver through the enterprise manager.(on the em console, inside home/administration/JDBC resources ). I am getting the following error :
    Unable to create : com.microsoft.jdbc.sqlserver.SQLServerDriver
    Missing class: com.microsoft.jdbc.sqlserver.SQLServerDriver Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils Loader: oc4j:10.1.3 Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in E:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar This load was initiated at ascontrol.web.ascontrol:0.0.0 using the Class.forName() method. The missing class is available from the following locations: 1. Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/applib/mssqlserver.jar (from in /E:/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml) This code-source is available in loader global.libraries:1.0. This shared-library can be imported by the "ascontrol" application
    I tried adding mssqlserver.jar to the shared library.Still, i got the same error.
    The connection which i am trying to test, has the following entry in the data-sources.xml :
    <connection-pool name="BPELPM_CONNECTION_POOL1" max-connections="30">
         <connection-factory factory-class="com.microsoft.jdbc.sqlserver.SQLServerDriver" user="sa" password="" url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411;selectMethod=cursor" commit-record-table-name=""/>
         </connection-pool>
         <managed-data-source connection-pool-name="BPELPM_CONNECTION_POOL1" jndi-name="jdbc/ExpressJDBCDataSource" name="ExpressJDBCDataSource"/>
    I also tried with native-data-source option in the data-source.xml without a connection pool like -
    <native-data-source
    name="ExpressJDBCDataSource"
    jndi-name="jdbc/ExpressJDBCDataSource"
    description="Native DataSource"
    data-source-class="com.microsoft.jdbc.sqlserver.SQLServerDataSource"
    user="sa"
    password=""
    url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411 ;selectMethod=cursor ">
    </native-data-source>
    I am getting the same error as above.
    Has anybody encountered a similiar problem ?
    A related post that was posted by me is :
    SQL Server Driver Problem in Oracle Application Server 10.1.3 data-sources

    thank you very much for your help. for update server's full name, may I put the mapping values  into host file in the format of  <ip address> <hostname.domain name> <hostname>, do you think it is OK?
    in the second blog you suggest there is something about Server port(please refer to the following):
    in the window machine, there should be an entry like sapms<SAP System ID> , can you please give me a full example:
    let's say my system ID is EC1,  so it would be sapmsEC1  8000/tcp, right ?
    Here you have to enter the port of your application server. By default this is 80<SAP System ID>. But your basis administrator can modify this setting, thatu2019s why you should check it in the transaction SMICM (Goto -> Parameters -> Display). For example the IBSolution Development System Erinome the port is 8000.
    You can also have a look into your services file on your machine. If you have a windows machine then the file exists e.g. here C:\WINDOWS\system32\drivers\etc\services
    In this file you should search a entry like sapms<SAP System ID>.
    Edited by: jingying Sony on May 24, 2010 4:41 PM

Maybe you are looking for

  • Send button not working when text message

    When I was texting message with my friends, all of sudden I can't type the respond message unless I have to quit and try to text my friend again. The problem is the box where you typed your message is gray out and "Send" button is inactive or gray ou

  • Port forwarding only works for BT customers..

    Hi, I have a little bit of a strange issue and i'm hoping somebody could help. What I have is various devices NAS/IPcam/VNC etc, previously I had ports forwarded to these devices and all was working ok, i could reach them via the WAN address. What I

  • How to verify XI picked up the IDOC ?

    Hi All, I am trying to set a scenario, IDOC -> XI (BPM) -> FILE. The SAP guy sends IDOC, but my interface does not pick it up. So how can I verify that the IDOC is available for XI to be picked up ? I checked SXMB_MONI but did not find anything there

  • How can I sign out or remove the old apple ID in app store's updates?

    I created a new apple id and signed in the app store. When I update my apps, it requires me to sign in with my old apple id, and I cannot sign out my old id. How can I sign out or remove the old id in app store's updates?

  • VSS with SUP 2T

    Dears I have 2 no's 6509 chassis in VSS with sup2t and ASA-SM installed, as I know that the dataplane is active for both switches so the cisco says that I we will get the throughput of 4.0 tbps but the ASA-SM only supports 20 gbps, and all vlan inter